developer.intra2net.com Git - libftdi/blob - ftdi_eeprom/example.conf

   1 #see http://developer.intra2net.com/git/?p=libftdi;a=blob;f=src/ftdi.c
   2 #and http://developer.intra2net.com/git/?p=libftdi;a=blob;f=src/ftdi.h
   3 #and http://developer.intra2net.com/git/?p=libftdi;a=tree;f=ftdi_eeprom
   4 #and http://developer.intra2net.com/git/?p=libftdi;a=blob;f=ftdi_eeprom/example.conf
   5 #and http://developer.intra2net.com/git/?p=libftdi;a=blob;f=ftdi_eeprom/main.c
   6
   7 ############
   8 # Filename #
   9 ############
  10 filename=eeprom.new                                                                     # Filename of the EE file to be generated. Leave empty to skip file writing
  11 #flash_raw=false                                                                                # Boolean:
  12
  13 ## Include another config file?
  14 #include
  15
  16 ############
  17 #   IDs    #
  18 ############
  19 vendor_id="0x0403"                                                                      # Integer: Vendor ID. FT245R factory default 0x0403
  20 product_id="0x6001"                                                                     # Integer: Product ID. FT245R factory default 0x6001
  21
  22 ##############################
  23 # Device and Serial Strings  #
  24 ##############################
  25 manufacturer="ACME Inc"                                                         # String: Manufacturer. FT245R factory default FTDI
  26 product="USB Serial Converter"                                                  # String: Product. FT245R factory default FT245R USB FIFO
  27 serial="08-15"                                                                                  # String: Serial"number". FT245R factory default (sample chip) A9082P2B
  28 use_serial=true                                                                                 # Boolean: Use the serial number string
  29
  30 ############
  31 # Options  #
  32 ############
  33 max_power=500                                                                                   # Integer: Max. power consumption: value * 2 mA(?). Use 0 if self_powered = true. FT245R factory default 90
  34 self_powered=false                                                                              # Boolean: Turn this off for bus powered
  35 remote_wakeup=true                                                                              # Boolean: Turn this on for remote wakeup feature
  36
  37 # Normally you don't have to change one of these flags
  38 #in_is_isochronous=false                                                                # Boolean: In Endpoint is Isochronous
  39 #out_is_isochronous=false                                                               # Boolean: Out Endpoint is Isochronous
  40 #suspend_pull_downs=false                                                               # Boolean: Enable suspend pull downs for lower power
  41 #change_usb_version=false                                                               # Boolean: Change USB Version
  42 #usb_version=0x00                                                                               # Integer: Only used when change_usb_version is enabled
  43
  44 #default_pid=0x6001                                                                             # Integer: Default Pid.
  45
  46 #eeprom_type                                                                                    # Integer: Chip Type / EEPROM Type. Corresponds to ftdi_chip_type struct in ftdi.h
  47 #high_current=false                                                                             # Boolean: High Current Drive
  48
  49 ##Type_R chips
  50 # Only used on FT-R chips (when omitted, use chip defaults)
  51 # Possible values correspond to enum ftdi_cbus_func in ftdi.h and strings are defined in function parse_cbus in ftdi_eeprom/main.c
  52 # Values in the struct are (see current ftid.h for an up to date list):
  53 # CBUS_TXDEN = 0, CBUS_PWREN = 1, CBUS_RXLED = 2, CBUS_TXLED = 3, CBUS_TXRXLED = 4, CBUS_SLEEP = 5, CBUS_CLK48 = 6, CBUS_CLK24 = 7, CBUS_CLK12 = 8, CBUS_CLK6 =  9, CBUS_IOMODE = 0xa, CBUS_BB_WR = 0xb, CBUS_BB_RD = 0xc
  54 # Strings to be used here are:
  55 # "TXDEN", "PWREN", "RXLED", "TXLED", "TXRXLED", "SLEEP", "CLK48", "CLK24", "CLK12", "CLK6", "IOMODE", "BB_WR", "BB_RD"
  56 cbus0=TXLED                                                                                     # String parsed to integer: FT245R factory default TXLED
  57 cbus1=RXLED                                                                                     # String parsed to integer: FT245R factory default RXLED
  58 cbus2=TXDEN                                                                                     # String parsed to integer: FT245R factory default TXDEN
  59 cbus3=PWREN                                                                                     # String parsed to integer: FT245R factory default PWREN
  60 cbus4=SLEEP                                                                                     # String parsed to integer: FT245R factory default SLEEP
  61
  62 ## Only used on FT232H chips (when omitted, use chip defaults)
  63 # Possible values correspond to enum ftdi_cbush_func in ftdi.h and strings are defined in function parse_cbush in ftdi_eeprom/main.c.
  64 # Values are (see current ftid.h for an up to date list):
  65 # CBUSH_TRISTATE = 0, CBUSH_TXLED = 1, CBUSH_RXLED = 2, CBUSH_TXRXLED = 3, CBUSH_PWREN = 4, CBUSH_SLEEP = 5, CBUSH_DRIVE_0 = 6, CBUSH_DRIVE1 = 7, CBUSH_IOMODE = 8, CBUSH_TXDEN =  9,     CBUSH_CLK30 = 10, CBUSH_CLK15 = 11, CBUSH_CLK7_5 = 12
  66 # Strings to be used in this config file are:
  67 # "TRISTATE", "TXLED", "RXLED", "TXRXLED", "PWREN", "SLEEP", "DRIVE_0", "DRIVE1", "IOMODE", "TXDEN", "CLK30", "CLK15", "CLK7_5"
  68 ##Type_232H Chips
  69 #cbush0=TRISTATE                                                                                # String parsed to integer:
  70 #cbush1=TRISTATE                                                                                # String parsed to integer:
  71 #cbush2=TRISTATE                                                                                # String parsed to integer:
  72 #cbush3=TRISTATE                                                                                # String parsed to integer:
  73 #cbush4=TRISTATE                                                                                # String parsed to integer:
  74 #cbush5=TRISTATE                                                                                # String parsed to integer:
  75 #cbush6=TRISTATE                                                                                # String parsed to integer:
  76 #cbush7=TRISTATE                                                                                # String parsed to integer:
  77 #cbush8=TRISTATE                                                                                # String parsed to integer:
  78 #cbush9=TRISTATE                                                                                # String parsed to integer:
  79 # Group Drive
  80 # Strings to be used in this config file are:
  81 # "4MA", "8MA", "12MA", "16MA"
  82 #group0_drive                                                                                   # Integer:
  83
  84 # Only used on FT230X chips (when omitted, use chip defaults)
  85 # Possible values correspond to enum ftdi_cbusx_func in ftdi.h and strings are defined in function parse_cbusx in ftdi_eeprom/main.c.
  86 # Values are (see current ftid.h for an up to date list):
  87 # CBUSX_TRISTATE = 0, CBUSX_TXLED = 1, CBUSX_RXLED = 2, CBUSX_TXRXLED = 3, CBUSX_PWREN = 4, CBUSX_SLEEP = 5, CBUSX_DRIVE_0 = 6, CBUSX_DRIVE1 = 7, CBUSX_IOMODE = 8, CBUSX_TXDEN =  9,     CBUSX_CLK24 = 10, CBUSX_CLK12 = 11, CBUSX_CLK6 = 12, CBUSX_BAT_DETECT = 13, CBUSX_BAT_DETECT_NEG = 14, CBUSX_I2C_TXE = 15, CBUSX_I2C_RXF = 16, CBUSX_VBUS_SENSE = 17, CBUSX_BB_WR = 18, CBUSX_BB_RD = 19, CBUSX_TIME_STAMP = 20, CBUSX_AWAKE = 21
  88 # Strings to be used in this config file are:
  89 # "TRISTATE", "TXLED", "RXLED", "TXRXLED", "PWREN", "SLEEP", "DRIVE_0", "DRIVE1", "IOMODE", "TXDEN", "CLK24", "CLK12", "CLK6", "BAT_DETECT", "BAT_DETECT_NEG", "I2C_TXE", "I2C_RXF", "VBUS_SENSE", "BB_WR", "BB_RD", "TIME_STAMP", "AWAKE"
  90 #cbusx0=TXDEN                                                                                   # String parsed to integer:
  91 #cbusx1=RXLED                                                                                   # String parsed to integer:
  92 #cbusx2=TXLED                                                                                   # String parsed to integer:
  93 #cbusx3=SLEEP                                                                                   # String parsed to integer:
  94
  95 ########
  96 # Misc #
  97 ########
  98
  99 ## Pin Configuration
 100 #invert_txd                                                                                             # Boolean: Invert TXD signal
 101 #invert_rxd                                                                                             # Boolean: Invert RXD signal
 102 #invert_rts                                                                                             # Boolean: Invert RTS signal
 103 #invert_cts                                                                                             # Boolean: Invert CTS signal
 104 #invert_dtr                                                                                             # Boolean: Invert DTR signal
 105 #invert_dsr                                                                                             # Boolean: Invert DSR signal
 106 #invert_dcd                                                                                             # Boolean: Invert DCD signal
 107 #invert_ri                                                                                              # Boolean: Invert RI signal
 108
 109 ## Channel Types and Drivers
 110 # Possible values are (see current ftid.h (Interface Mode macros) and ftdi.c "channel_mode" for an up to date list). They are parsed in fucntion parse_chtype in ftdi_eeprom/main.c.
 111 # (from ftid.h): UART= 0x0, FIFO = 0x1, OPTO = 0x2, CPU = 0x4, FT1284 = 0x8, RS485 = 0x10
 112 # (from ftdi.c): UART = 0x0, FIOF = 0x1, CPU = 0x2, OPTO = 0x3, FT1284 = 0x3
 113 # Strings to be used in this config file are:
 114 # "UART", "FIFO", "OPTO", "CPU", "FT1284"
 115 cha_type=FIFO                                                                                   # String parsed to integer:
 116 #chb_type                                                                                               # String parsed to integer:
 117
 118 cha_vcp=false                                                                                   # Boolean:
 119 #chb_vcp=false                                                                                  # Boolean:
 120 #chc_vcp=false                                                                                  # Boolean:
 121 #chd_vcp=false                                                                                  # Boolean:
 122 #cha_rs485                                                                                              # Boolean:
 123 #chb_rs485                                                                                              # Boolean:
 124 #chc_rs485                                                                                              # Boolean:
 125 #chd_rs485                                                                                              # Boolean:
 126
 127 ## Include user defined binary data into the the eeprom at address?
 128 #user_data_addr                                                                                 # Integer:
 129 #user_data_file                                                                                 # String: Filename of the data file to be used
 130
 131