--- /dev/null
+/***************************************************************************
+ ftdi_i.h - description
+ -------------------
+ begin : Don Sep 9 2011
+ copyright : (C) 2003-2011 by Intra2net AG and the libftdi developers
+ email : opensource@intra2net.com
+ ***************************************************************************/
+
+/***************************************************************************
+ * *
+ * This program is free software; you can redistribute it and/or modify *
+ * it under the terms of the GNU Lesser General Public License *
+ * version 2.1 as published by the Free Software Foundation; *
+ * *
+ ***************************************************************************
+
+ Non public definitions here
+
+*/
+
+/* Even on 93xx66 at max 256 bytes are used (AN_121)*/
+#define FTDI_MAX_EEPROM_SIZE 256
+
+/**
+ \brief FTDI eeprom structure
+*/
+struct ftdi_eeprom
+{
+ /** vendor id */
+ int vendor_id;
+ /** product id */
+ int product_id;
+
+ /** Was the eeprom structure initialized for the actual
+ connected device? **/
+ int initialized_for_connected_device;
+
+ /** self powered */
+ int self_powered;
+ /** remote wakeup */
+ int remote_wakeup;
+
+ int is_not_pnp;
+
+ /* Suspend on DBUS7 Low */
+ int suspend_dbus7;
+
+ /** input in isochronous transfer mode */
+ int in_is_isochronous;
+ /** output in isochronous transfer mode */
+ int out_is_isochronous;
+ /** suspend pull downs */
+ int suspend_pull_downs;
+
+ /** use serial */
+ int use_serial;
+ /** usb version */
+ int usb_version;
+ /** Use usb version on FT2232 devices*/
+ int use_usb_version;
+ /** maximum power */
+ int max_power;
+
+ /** manufacturer name */
+ char *manufacturer;
+ /** product name */
+ char *product;
+ /** serial number */
+ char *serial;
+
+ /* 2232D/H(/FT4432H?) specific */
+ /* Hardware type, 0 = RS232 Uart, 1 = 245 FIFO, 2 = CPU FIFO,
+ 4 = OPTO Isolate */
+ int channel_a_type;
+ int channel_b_type;
+ /* Driver Type, 1 = VCP */
+ int channel_a_driver;
+ int channel_b_driver;
+
+ /* Special function of FT232R/FT232H devices (and possibly others as well) */
+ /** CBUS pin function. See CBUS_xxx defines. */
+ int cbus_function[9];
+ /** Select hight current drive on R devices. */
+ int high_current;
+ /** Select hight current drive on A channel (2232C */
+ int high_current_a;
+ /** Select hight current drive on B channel (2232C). */
+ int high_current_b;
+ /** Select inversion of data lines (bitmask). */
+ int invert;
+
+ /*2232H/4432H Group specific values */
+ /* Group0 is AL on 2322H and A on 4232H
+ Group1 is AH on 2232H and B on 4232H
+ Group2 is BL on 2322H and C on 4232H
+ Group3 is BH on 2232H and C on 4232H*/
+ int group0_drive;
+ int group0_schmitt;
+ int group0_slew;
+ int group1_drive;
+ int group1_schmitt;
+ int group1_slew;
+ int group2_drive;
+ int group2_schmitt;
+ int group2_slew;
+ int group3_drive;
+ int group3_schmitt;
+ int group3_slew;
+
+ int powersave;
+
+ int clock_polarity;
+ int data_order;
+ int flow_control;
+
+ /** eeprom size in bytes. This doesn't get stored in the eeprom
+ but is the only way to pass it to ftdi_eeprom_build. */
+ int size;
+ /* EEPROM Type 0x46 for 93xx46, 0x56 for 93xx56 and 0x66 for 93xx66*/
+ int chip;
+ unsigned char buf[FTDI_MAX_EEPROM_SIZE];
+};
+