Initial import of using libusb-1.0.
[libftdi] / src / ftdi.h
index 4134351..e57fe94 100644 (file)
 #ifndef __libftdi_h__
 #define __libftdi_h__
 
-#include <usb.h>
-
-enum ftdi_chip_type { TYPE_AM=0, TYPE_BM=1, TYPE_2232C=2 };
-enum ftdi_mpsse_mode {
-    BITMODE_RESET  = 0x00,
-    BITMODE_BITBANG= 0x01,
-    BITMODE_MPSSE  = 0x02,
-    BITMODE_SYNCBB = 0x04,
-    BITMODE_MCU    = 0x08,
-    BITMODE_OPTO   = 0x10
+#include <libusb.h>
+
+#define FTDI_DEFAULT_EEPROM_SIZE 128
+
+/** FTDI chip type */
+enum ftdi_chip_type { TYPE_AM=0, TYPE_BM=1, TYPE_2232C=2, TYPE_R=3, TYPE_2232H=4, TYPE_4232H=5 };
+/** Parity mode for ftdi_set_line_property() */
+enum ftdi_parity_type { NONE=0, ODD=1, EVEN=2, MARK=3, SPACE=4 };
+/** Number of stop bits for ftdi_set_line_property() */
+enum ftdi_stopbits_type { STOP_BIT_1=0, STOP_BIT_15=1, STOP_BIT_2=2 };
+/** Number of bits for ftdi_set_line_property() */
+enum ftdi_bits_type { BITS_7=7, BITS_8=8 };
+/** Break type for ftdi_set_line_property2() */
+enum ftdi_break_type { BREAK_OFF=0, BREAK_ON=1 };
+
+/** MPSSE bitbang modes */
+enum ftdi_mpsse_mode
+{
+    BITMODE_RESET  = 0x00,    /**< switch off bitbang mode, back to regular serial/FIFO */
+    BITMODE_BITBANG= 0x01,    /**< classical asynchronous bitbang mode, introduced with B-type chips */
+    BITMODE_MPSSE  = 0x02,    /**< MPSSE mode, available on 2232x chips */
+    BITMODE_SYNCBB = 0x04,    /**< synchronous bitbang mode, available on 2232x and R-type chips  */
+    BITMODE_MCU    = 0x08,    /**< MCU Host Bus Emulation mode, available on 2232x chips */
+                              /* CPU-style fifo mode gets set via EEPROM */
+    BITMODE_OPTO   = 0x10,    /**< Fast Opto-Isolated Serial Interface Mode, available on 2232x chips  */
+    BITMODE_CBUS   = 0x20,    /**< Bitbang on CBUS pins of R-type chips, configure in EEPROM before */
+    BITMODE_SYNCFF = 0x40,    /**< Single Channel Synchronous FIFO mode, available on 2232H chips */
 };
 
-/* Port interface code for FT2232C */
-enum ftdi_interface {
+/** Port interface for chips with multiple interfaces */
+enum ftdi_interface
+{
     INTERFACE_ANY = 0,
     INTERFACE_A   = 1,
-    INTERFACE_B   = 2
+    INTERFACE_B   = 2,
+    INTERFACE_C   = 3,
+    INTERFACE_D   = 4
 };
 
 /* Shifting commands IN MPSSE Mode*/
@@ -62,7 +82,7 @@ enum ftdi_interface {
 #define DIV_VALUE(rate) (rate > 6000000)?0:((6000000/rate -1) > 0xffff)? 0xffff: (6000000/rate -1)
 
 /* Commands in MPSSE and Host Emulation Mode */
-#define SEND_IMMEDIATE 0x87 
+#define SEND_IMMEDIATE 0x87
 #define WAIT_ON_HIGH   0x88
 #define WAIT_ON_LOW    0x89
 
@@ -78,75 +98,228 @@ enum ftdi_interface {
 /* Address High */
 /* Address Low  */
 
-struct ftdi_context {
-    // USB specific
-    struct usb_dev_handle *usb_dev;
+/* Definitions for flow control */
+#define SIO_RESET          0 /* Reset the port */
+#define SIO_MODEM_CTRL     1 /* Set the modem control register */
+#define SIO_SET_FLOW_CTRL  2 /* Set flow control register */
+#define SIO_SET_BAUD_RATE  3 /* Set baud rate */
+#define SIO_SET_DATA       4 /* Set the data characteristics of the port */
+
+#define FTDI_DEVICE_OUT_REQTYPE (LIBUSB_REQUEST_TYPE_VENDOR | LIBUSB_RECIPIENT_DEVICE | LIBUSB_ENDPOINT_OUT)
+#define FTDI_DEVICE_IN_REQTYPE (LIBUSB_REQUEST_TYPE_VENDOR | LIBUSB_RECIPIENT_DEVICE | LIBUSB_ENDPOINT_IN)
+
+/* Requests */
+#define SIO_RESET_REQUEST             SIO_RESET
+#define SIO_SET_BAUDRATE_REQUEST      SIO_SET_BAUD_RATE
+#define SIO_SET_DATA_REQUEST          SIO_SET_DATA
+#define SIO_SET_FLOW_CTRL_REQUEST     SIO_SET_FLOW_CTRL
+#define SIO_SET_MODEM_CTRL_REQUEST    SIO_MODEM_CTRL
+#define SIO_POLL_MODEM_STATUS_REQUEST 0x05
+#define SIO_SET_EVENT_CHAR_REQUEST    0x06
+#define SIO_SET_ERROR_CHAR_REQUEST    0x07
+#define SIO_SET_LATENCY_TIMER_REQUEST 0x09
+#define SIO_GET_LATENCY_TIMER_REQUEST 0x0A
+#define SIO_SET_BITMODE_REQUEST       0x0B
+#define SIO_READ_PINS_REQUEST         0x0C
+#define SIO_READ_EEPROM_REQUEST       0x90
+#define SIO_WRITE_EEPROM_REQUEST      0x91
+#define SIO_ERASE_EEPROM_REQUEST      0x92
+
+
+#define SIO_RESET_SIO 0
+#define SIO_RESET_PURGE_RX 1
+#define SIO_RESET_PURGE_TX 2
+
+#define SIO_DISABLE_FLOW_CTRL 0x0
+#define SIO_RTS_CTS_HS (0x1 << 8)
+#define SIO_DTR_DSR_HS (0x2 << 8)
+#define SIO_XON_XOFF_HS (0x4 << 8)
+
+#define SIO_SET_DTR_MASK 0x1
+#define SIO_SET_DTR_HIGH ( 1 | ( SIO_SET_DTR_MASK  << 8))
+#define SIO_SET_DTR_LOW  ( 0 | ( SIO_SET_DTR_MASK  << 8))
+#define SIO_SET_RTS_MASK 0x2
+#define SIO_SET_RTS_HIGH ( 2 | ( SIO_SET_RTS_MASK << 8 ))
+#define SIO_SET_RTS_LOW ( 0 | ( SIO_SET_RTS_MASK << 8 ))
+
+#define SIO_RTS_CTS_HS (0x1 << 8)
+
+/* marker for unused usb urb structures
+   (taken from libusb) */
+#define FTDI_URB_USERCONTEXT_COOKIE ((void *)0x1)
+
+#ifdef __GNUC__
+    #define DEPRECATED(func) func __attribute__ ((deprecated))
+#elif defined(_MSC_VER)
+    #define DEPRECATED(func) __declspec(deprecated) func
+#else
+    #pragma message("WARNING: You need to implement DEPRECATED for this compiler")
+    #define DEPRECATED(func) func
+#endif
+
+struct ftdi_transfer_control
+{
+    int completed;
+    unsigned char *buf;
+    int size;
+    int offset;
+    struct ftdi_context *ftdi;
+    struct libusb_transfer *transfer;
+};
+
+/**
+    \brief Main context structure for all libftdi functions.
+
+    Do not access directly if possible.
+*/
+struct ftdi_context
+{
+    /* USB specific */
+    /** libusb's usb_dev_handle */
+    struct libusb_device_handle *usb_dev;
+    /** usb read timeout */
     int usb_read_timeout;
+    /** usb write timeout */
     int usb_write_timeout;
 
-    // FTDI specific
+    /* FTDI specific */
+    /** FTDI chip type */
     enum ftdi_chip_type type;
+    /** baudrate */
     int baudrate;
+    /** bitbang mode state */
     unsigned char bitbang_enabled;
+    /** pointer to read buffer for ftdi_read_data */
     unsigned char *readbuffer;
+    /** read buffer offset */
     unsigned int readbuffer_offset;
+    /** number of remaining data in internal read buffer */
     unsigned int readbuffer_remaining;
+    /** read buffer chunk size */
     unsigned int readbuffer_chunksize;
+    /** write buffer chunk size */
     unsigned int writebuffer_chunksize;
-
-    // FTDI FT2232C requirecments
-    int interface;   // 0 or 1
-    int index;       // 1 or 2
-    // Endpoints
+    /** maximum packet size. Needed for filtering modem status bytes every n packets. */
+    unsigned int max_packet_size;
+
+    /* FTDI FT2232C requirecments */
+    /** FT2232C interface number: 0 or 1 */
+    int interface;   /* 0 or 1 */
+    /** FT2232C index number: 1 or 2 */
+    int index;       /* 1 or 2 */
+    /* Endpoints */
+    /** FT2232C end points: 1 or 2 */
     int in_ep;
-    int out_ep;      // 1 or 2
+    int out_ep;      /* 1 or 2 */
 
-    /* 1: (default) Normal bitbang mode, 2: FT2232C SPI bitbang mode */
+    /** Bitbang mode. 1: (default) Normal bitbang mode, 2: FT2232C SPI bitbang mode */
     unsigned char bitbang_mode;
 
-    // misc
+    /** EEPROM size. Default is 128 bytes for 232BM and 245BM chips */
+    int eeprom_size;
+
+    /** String representation of last error */
     char *error_str;
 };
 
-struct ftdi_eeprom {
+/**
+    \brief list of usb devices created by ftdi_usb_find_all()
+*/
+struct ftdi_device_list
+{
+    /** pointer to next entry */
+    struct ftdi_device_list *next;
+    /** pointer to libusb's usb_device */
+    struct libusb_device *dev;
+};
+
+/**
+    \brief FTDI eeprom structure
+*/
+struct ftdi_eeprom
+{
+    /** vendor id */
     int vendor_id;
+    /** product id */
     int product_id;
 
+    /** self powered */
     int self_powered;
+    /** remote wakeup */
     int remote_wakeup;
+    /** chip type */
     int BM_type_chip;
 
+    /** input in isochronous transfer mode */
     int in_is_isochronous;
+    /** output in isochronous transfer mode */
     int out_is_isochronous;
+    /** suspend pull downs */
     int suspend_pull_downs;
 
+    /** use serial */
     int use_serial;
+    /** fake usb version */
     int change_usb_version;
+    /** usb version */
     int usb_version;
+    /** maximum power */
     int max_power;
 
+    /** manufacturer name */
     char *manufacturer;
+    /** product name */
     char *product;
+    /** serial number */
     char *serial;
+
+    /** eeprom size in bytes. This doesn't get stored in the eeprom
+        but is the only way to pass it to ftdi_eeprom_build. */
+    int size;
 };
 
 #ifdef __cplusplus
-extern "C" {
+extern "C"
+{
 #endif
 
     int ftdi_init(struct ftdi_context *ftdi);
-    int ftdi_select_interfae(struct ftdi_context *ftdi, enum ftdi_interface interface);
+    struct ftdi_context *ftdi_new(void);
+    int ftdi_set_interface(struct ftdi_context *ftdi, enum ftdi_interface interface);
 
     void ftdi_deinit(struct ftdi_context *ftdi);
-    void ftdi_set_usbdev (struct ftdi_context *ftdi, usb_dev_handle *usbdev);
+    void ftdi_free(struct ftdi_context *ftdi);
+    void ftdi_set_usbdev (struct ftdi_context *ftdi, struct libusb_device_handle *usbdev);
+
+    int ftdi_usb_find_all(struct ftdi_context *ftdi, struct ftdi_device_list **devlist,
+                          int vendor, int product);
+    void ftdi_list_free(struct ftdi_device_list **devlist);
+    void ftdi_list_free2(struct ftdi_device_list *devlist);
+    int ftdi_usb_get_strings(struct ftdi_context *ftdi, struct libusb_device *dev,
+                             char * manufacturer, int mnf_len,
+                             char * description, int desc_len,
+                             char * serial, int serial_len);
+
     int ftdi_usb_open(struct ftdi_context *ftdi, int vendor, int product);
     int ftdi_usb_open_desc(struct ftdi_context *ftdi, int vendor, int product,
                            const char* description, const char* serial);
+    int ftdi_usb_open_desc_index(struct ftdi_context *ftdi, int vendor, int product,
+                           const char* description, const char* serial, unsigned int index);
+    int ftdi_usb_open_dev(struct ftdi_context *ftdi, struct libusb_device *dev);
+    int ftdi_usb_open_string(struct ftdi_context *ftdi, const char* description);
+
     int ftdi_usb_close(struct ftdi_context *ftdi);
     int ftdi_usb_reset(struct ftdi_context *ftdi);
+    int ftdi_usb_purge_rx_buffer(struct ftdi_context *ftdi);
+    int ftdi_usb_purge_tx_buffer(struct ftdi_context *ftdi);
     int ftdi_usb_purge_buffers(struct ftdi_context *ftdi);
 
     int ftdi_set_baudrate(struct ftdi_context *ftdi, int baudrate);
+    int ftdi_set_line_property(struct ftdi_context *ftdi, enum ftdi_bits_type bits,
+                               enum ftdi_stopbits_type sbit, enum ftdi_parity_type parity);
+    int ftdi_set_line_property2(struct ftdi_context *ftdi, enum ftdi_bits_type bits,
+                                enum ftdi_stopbits_type sbit, enum ftdi_parity_type parity,
+                                enum ftdi_break_type break_type);
 
     int ftdi_read_data(struct ftdi_context *ftdi, unsigned char *buf, int size);
     int ftdi_read_data_set_chunksize(struct ftdi_context *ftdi, unsigned int chunksize);
@@ -156,7 +329,10 @@ extern "C" {
     int ftdi_write_data_set_chunksize(struct ftdi_context *ftdi, unsigned int chunksize);
     int ftdi_write_data_get_chunksize(struct ftdi_context *ftdi, unsigned int *chunksize);
 
-    int ftdi_enable_bitbang(struct ftdi_context *ftdi, unsigned char bitmask);
+    int ftdi_write_data_async(struct ftdi_context *ftdi, unsigned char *buf, int size);
+    void ftdi_async_complete(struct ftdi_context *ftdi, int wait_for_more);
+
+    int DEPRECATED(ftdi_enable_bitbang(struct ftdi_context *ftdi, unsigned char bitmask));
     int ftdi_disable_bitbang(struct ftdi_context *ftdi);
     int ftdi_set_bitmode(struct ftdi_context *ftdi, unsigned char bitmask, unsigned char mode);
     int ftdi_read_pins(struct ftdi_context *ftdi, unsigned char *pins);
@@ -164,16 +340,36 @@ extern "C" {
     int ftdi_set_latency_timer(struct ftdi_context *ftdi, unsigned char latency);
     int ftdi_get_latency_timer(struct ftdi_context *ftdi, unsigned char *latency);
 
-    // init and build eeprom from ftdi_eeprom structure
+    int ftdi_poll_modem_status(struct ftdi_context *ftdi, unsigned short *status);
+
+    /* flow control */
+    int ftdi_setflowctrl(struct ftdi_context *ftdi, int flowctrl);
+    int ftdi_setdtr_rts(struct ftdi_context *ftdi, int dtr, int rts);
+    int ftdi_setdtr(struct ftdi_context *ftdi, int state);
+    int ftdi_setrts(struct ftdi_context *ftdi, int state);
+
+    int ftdi_set_event_char(struct ftdi_context *ftdi, unsigned char eventch, unsigned char enable);
+    int ftdi_set_error_char(struct ftdi_context *ftdi, unsigned char errorch, unsigned char enable);
+
+    /* set eeprom size */
+    void ftdi_eeprom_setsize(struct ftdi_context *ftdi, struct ftdi_eeprom *eeprom, int size);
+
+    /* init and build eeprom from ftdi_eeprom structure */
     void ftdi_eeprom_initdefaults(struct ftdi_eeprom *eeprom);
-    int  ftdi_eeprom_build(struct ftdi_eeprom *eeprom, unsigned char *output);
+    int ftdi_eeprom_build(struct ftdi_eeprom *eeprom, unsigned char *output);
+    int ftdi_eeprom_decode(struct ftdi_eeprom *eeprom, unsigned char *output, int size);
 
-    // "eeprom" needs to be valid 128 byte eeprom (generated by the eeprom generator)
-    // the checksum of the eeprom is valided
+    /* "eeprom" needs to be valid 128 byte eeprom (generated by the eeprom generator)
+       the checksum of the eeprom is valided */
     int ftdi_read_eeprom(struct ftdi_context *ftdi, unsigned char *eeprom);
+    int ftdi_read_chipid(struct ftdi_context *ftdi, unsigned int *chipid);
+    int ftdi_read_eeprom_getsize(struct ftdi_context *ftdi, unsigned char *eeprom, int maxsize);
     int ftdi_write_eeprom(struct ftdi_context *ftdi, unsigned char *eeprom);
     int ftdi_erase_eeprom(struct ftdi_context *ftdi);
 
+    int ftdi_read_eeprom_location (struct ftdi_context *ftdi, int eeprom_addr, unsigned short *eeprom_val);
+    int ftdi_write_eeprom_location(struct ftdi_context *ftdi, int eeprom_addr, unsigned short eeprom_val);
+
     char *ftdi_get_error_string(struct ftdi_context *ftdi);
 
 #ifdef __cplusplus