BITMODE_OPTO = 0x10, /**< Fast Opto-Isolated Serial Interface Mode, available on 2232x chips */
BITMODE_CBUS = 0x20, /**< Bitbang on CBUS pins of R-type chips, configure in EEPROM before */
BITMODE_SYNCFF = 0x40, /**< Single Channel Synchronous FIFO mode, available on 2232H chips */
+ BITMODE_FT1284 = 0x80, /**< FT1284 mode, available on 232H chips */
};
/** Port interface for chips with multiple interfaces */
int vendor_id;
/** product id */
int product_id;
+
+ /** Was the eeprom structure initialized for the actual
+ connected device? **/
+ int initialized_for_connected_device;
/** self powered */
int self_powered;
/* Special function of FT232R/FT232H devices (and possibly others as well) */
/** CBUS pin function. See CBUS_xxx defines. */
- int cbus_function[9];
+ int cbus_function[10];
/** Select hight current drive on R devices. */
int high_current;
/** Select hight current drive on A channel (2232C */
struct libusb_device *dev;
};
#define FT1284_CLK_IDLE_STATE 0x01
-#define FT1284_DATA_LSB 0x02
+#define FT1284_DATA_LSB 0x02 /* DS_FT232H 1.3 amd ftd2xx.h 1.0.4 disagree here*/
#define FT1284_FLOW_CONTROL 0x04
#define POWER_SAVE_DISABLE_H 0x80
/** Interface Mode. */
#define CHANNEL_IS_UART 0x0
-#define CHANNEL_IS_245 0x1
-#define CHANNEL_IS_CPU 0x2
-#define CHANNEL_IS_OPTO 0x4
+#define CHANNEL_IS_FIFO 0x1
+#define CHANNEL_IS_OPTO 0x2
+#define CHANNEL_IS_CPU 0x4
+#define CHANNEL_IS_FT1284 0x8
#define DRIVE_4MA 0
#define DRIVE_8MA 1
int ftdi_set_eeprom_value(struct ftdi_context *ftdi, enum ftdi_eeprom_value value_name, int value);
int ftdi_get_eeprom_buf(struct ftdi_context *ftdi, unsigned char * buf, int size);
+ int ftdi_set_eeprom_buf(struct ftdi_context *ftdi, const unsigned char * buf, int size);
int ftdi_read_eeprom(struct ftdi_context *ftdi);
int ftdi_read_chipid(struct ftdi_context *ftdi, unsigned int *chipid);