Evaluate eeprom Byte 0 Bit 7: Suspend on DBUS7 low

[libftdi] / src / ftdi.h

diff --git a/src/ftdi.h b/src/ftdi.h
index 6906894..281c261 100644 (file)
--- a/src/ftdi.h
+++ b/src/ftdi.h
@@ -185,6 +185,9 @@ struct ftdi_eeprom
     /** release */
     int release;
 
+    /* Suspend on DBUS7 Low */
+    int suspend_dbus7;
+
     /** input in isochronous transfer mode */
     int in_is_isochronous;
     /** output in isochronous transfer mode */
@@ -208,14 +211,44 @@ struct ftdi_eeprom
     /** serial number */
     char *serial;
 
+    /* 2232D/H(/FT4432H?) specific */
+    /* Hardware type, 0 = RS232 Uart, 1 = 245 FIFO, 2 = CPU FIFO, 
+       4 = OPTO Isolate */
+    int channel_a_type;
+    int channel_b_type;
+    /*  Driver Type, 1 = VCP */
+    int channel_a_driver;
+    int channel_b_driver;
+
     /* Special function of FT232R devices (and possibly others as well) */
     /** CBUS pin function. See CBUS_xxx defines. */
     int cbus_function[5];
     /** Select hight current drive. */
-    int high_current;
+    int high_current_a;
+    /** Select hight current drive on B port (2232C). */
+    int high_current_b;
     /** Select inversion of data lines (bitmask). */
     int invert;
 
+    /*2232H/4432H Group specific values */
+    /* Group0 is AL on 2322H and A on 4232H
+       Group1 is AH on 2232H and B on 4232H
+       Group2 is BL on 2322H and C on 4232H
+       Group3 is BH on 2232H and C on 4232H*/
+    int group0_drive;
+    int group0_schmitt;
+    int group0_slew;
+    int group1_drive;
+    int group1_schmitt;
+    int group1_slew;
+    int group2_drive;
+    int group2_schmitt;
+    int group2_slew;
+    int group3_drive;
+    int group3_schmitt;
+    int group3_slew;
+    
+
     /** eeprom size in bytes. This doesn't get stored in the eeprom
         but is the only way to pass it to ftdi_eeprom_build. */
     int size;
@@ -336,8 +369,26 @@ struct ftdi_device_list
 /** Invert RI# */
 #define INVERT_RI  0x80
 
+/** Interface Mode. */
+#define CHANNEL_IS_UART 0x0
+#define CHANNEL_IS_245  0x1
+#define CHANNEL_IS_CPU  0x2
+#define CHANNEL_IS_OPTO 0x4
+
+#define DRIVE_4MA  0
+#define DRIVE_8MA  1
+#define DRIVE_12MA 2
+#define DRIVE_16MA 3
+#define SLOW_SLEW  4
+#define IS_SCHMITT 8
+
+/** Driver Type. */
+#define DRIVER_VCP 0x08
+
+#define SUSPEND_DBUS7 0x80
+
 /** High current drive. */
-#define HIGH_CURRENT_DRIVE 0x04
+#define HIGH_CURRENT_DRIVE 0x10
 
 /**
     \brief Progress Info for streaming read