Use a private header for the private EEPROM structures

[libftdi] / src / ftdi.h

diff --git a/src/ftdi.h b/src/ftdi.h
index 759e61b..03a7d52 100644 (file)
--- a/src/ftdi.h
+++ b/src/ftdi.h
@@ -19,9 +19,6 @@
 
 #include <libusb.h>
 
-/* Even on 93xx66 at max 256 bytes are used (AN_121)*/
-#define FTDI_MAX_EEPROM_SIZE 256
-
 /** FTDI chip type */
 enum ftdi_chip_type { TYPE_AM=0, TYPE_BM=1, TYPE_2232C=2, TYPE_R=3, TYPE_2232H=4, TYPE_4232H=5, TYPE_232H=6 };
 /** Parity mode for ftdi_set_line_property() */
@@ -192,106 +189,6 @@ struct ftdi_transfer_control
 };
 
 /**
-    \brief FTDI eeprom structure
-*/
-struct ftdi_eeprom
-{
-    /** vendor id */
-    int vendor_id;
-    /** product id */
-    int product_id;
-    
-    /** Was the eeprom structure initialized for the actual
-        connected device? **/
-    int initialized_for_connected_device;
-
-    /** self powered */
-    int self_powered;
-    /** remote wakeup */
-    int remote_wakeup;
-
-    int is_not_pnp;
-
-    /* Suspend on DBUS7 Low */
-    int suspend_dbus7;
-
-    /** input in isochronous transfer mode */
-    int in_is_isochronous;
-    /** output in isochronous transfer mode */
-    int out_is_isochronous;
-    /** suspend pull downs */
-    int suspend_pull_downs;
-
-    /** use serial */
-    int use_serial;
-    /** usb version */
-    int usb_version;
-    /** Use usb version on FT2232 devices*/
-    int use_usb_version;
-     /** maximum power */
-    int max_power;
-
-    /** manufacturer name */
-    char *manufacturer;
-    /** product name */
-    char *product;
-    /** serial number */
-    char *serial;
-
-    /* 2232D/H(/FT4432H?) specific */
-    /* Hardware type, 0 = RS232 Uart, 1 = 245 FIFO, 2 = CPU FIFO, 
-       4 = OPTO Isolate */
-    int channel_a_type;
-    int channel_b_type;
-    /*  Driver Type, 1 = VCP */
-    int channel_a_driver;
-    int channel_b_driver;
-
-    /* Special function of FT232R/FT232H devices (and possibly others as well) */
-    /** CBUS pin function. See CBUS_xxx defines. */
-    int cbus_function[10];
-    /** Select hight current drive on R devices. */
-    int high_current;
-    /** Select hight current drive on A channel (2232C */
-    int high_current_a;
-    /** Select hight current drive on B channel (2232C). */
-    int high_current_b;
-    /** Select inversion of data lines (bitmask). */
-    int invert;
-
-    /*2232H/4432H Group specific values */
-    /* Group0 is AL on 2322H and A on 4232H
-       Group1 is AH on 2232H and B on 4232H
-       Group2 is BL on 2322H and C on 4232H
-       Group3 is BH on 2232H and C on 4232H*/
-    int group0_drive;
-    int group0_schmitt;
-    int group0_slew;
-    int group1_drive;
-    int group1_schmitt;
-    int group1_slew;
-    int group2_drive;
-    int group2_schmitt;
-    int group2_slew;
-    int group3_drive;
-    int group3_schmitt;
-    int group3_slew;
-
-    int powersave;
-    
-    int clock_polarity;
-    int data_order;
-    int flow_control;
-
-    /** eeprom size in bytes. This doesn't get stored in the eeprom
-        but is the only way to pass it to ftdi_eeprom_build. */
-    int size;
-    /* EEPROM Type 0x46 for 93xx46, 0x56 for 93xx56 and 0x66 for 93xx66*/
-    int chip;
-    unsigned char buf[FTDI_MAX_EEPROM_SIZE];
-};
-
-/**
     \brief Main context structure for all libftdi functions.
 
     Do not access directly if possible.