output[0x13] = serial_size*2 + 2;
+ if(ftdi->type > TYPE_AM) /*use_serial not used in AM devices*/
+ {
+ if (eeprom->use_serial == USE_SERIAL_NUM )
+ output[0x0A] |= USE_SERIAL_NUM;
+ else
+ output[0x0A] &= ~USE_SERIAL_NUM;
+ }
/* Fixme: ftd2xx seems to append 0x02, 0x03 and 0x01 for PnP = 0 or 0x00 else */
// calculate checksum
case TYPE_BM:
output[0x0C] = eeprom->usb_version & 0xff;
output[0x0D] = (eeprom->usb_version>>8) & 0xff;
- if (eeprom->use_serial == 1)
- output[0x0A] |= 0x8;
- else
- output[0x0A] &= ~0x8;
output[0x14] = eeprom->chip;
break;
case TYPE_2232C:
output[0x0A] |= 0x4;
else
output[0x0A] &= ~0x4;
- if (eeprom->use_serial == USE_SERIAL_NUM )
- output[0x0A] |= USE_SERIAL_NUM;
- else
- output[0x0A] &= ~0x8;
output[0x0C] = eeprom->usb_version & 0xff;
output[0x0D] = (eeprom->usb_version>>8) & 0xff;
output[0x14] = eeprom->chip;
output[0x0A] |= 0x4;
else
output[0x0A] &= ~0x4;
- if (eeprom->use_serial == USE_SERIAL_NUM)
- output[0x0A] |= USE_SERIAL_NUM;
- else
- output[0x0A] &= ~0x8;
output[0x0B] = eeprom->invert;
output[0x0C] = eeprom->usb_version & 0xff;
output[0x0D] = (eeprom->usb_version>>8) & 0xff;
\param eeprom_val Value to be written
\retval 0: all fine
- \retval -1: read failed
+ \retval -1: write failed
\retval -2: USB device unavailable
+ \retval -3: Invalid access to checksum protected area below 0x80
+ \retval -4: Device can't access unprotected area
+ \retval -5: Reading chip type failed
*/
-int ftdi_write_eeprom_location(struct ftdi_context *ftdi, int eeprom_addr, unsigned short eeprom_val)
+int ftdi_write_eeprom_location(struct ftdi_context *ftdi, int eeprom_addr,
+ unsigned short eeprom_val)
{
+ int chip_type_location;
+ unsigned short chip_type;
+
if (ftdi == NULL || ftdi->usb_dev == NULL)
ftdi_error_return(-2, "USB device unavailable");
+ if(eeprom_addr <0x80)
+ ftdi_error_return(-2, "Invalid access to checksum protected area below 0x80");
+
+
+ switch (ftdi->type)
+ {
+ case TYPE_BM:
+ case TYPE_2232C:
+ chip_type_location = 0x14;
+ break;
+ case TYPE_2232H:
+ case TYPE_4232H:
+ chip_type_location = 0x18;
+ break;
+ default:
+ ftdi_error_return(-4, "Device can't access unprotected area");
+ }
+
+ if (ftdi_read_eeprom_location( ftdi, chip_type_location>>1, &chip_type))
+ ftdi_error_return(-5, "Reading failed failed");
+ fprintf(stderr," loc 0x%04x val 0x%04x\n", chip_type_location,chip_type);
+ if((chip_type & 0xff) != 0x66)
+ {
+ ftdi_error_return(-6, "EEPROM is not of 93x66");
+ }
+
if (libusb_control_transfer(ftdi->usb_dev, FTDI_DEVICE_OUT_REQTYPE,
SIO_WRITE_EEPROM_REQUEST, eeprom_val, eeprom_addr,
NULL, 0, ftdi->usb_write_timeout) != 0)