Minor fixes for MSVC++

[libftdi] / src / ftdi.c

diff --git a/src/ftdi.c b/src/ftdi.c
index 8546319..b6caf6c 100644 (file)
--- a/src/ftdi.c
+++ b/src/ftdi.c
@@ -1018,8 +1018,8 @@ static int ftdi_to_clkbits_AM(int baudrate, unsigned long *encoded_divisor)
     static const char am_adjust_up[8] = {0, 0, 0, 1, 0, 3, 2, 1};
     static const char am_adjust_dn[8] = {0, 0, 0, 1, 0, 1, 2, 3};
     int divisor, best_divisor, best_baud, best_baud_diff;
-    divisor = 24000000 / baudrate;
     int i;
+    divisor = 24000000 / baudrate;
 
     // Round down to supported fraction (AM only)
     divisor -= am_adjust_dn[divisor & 7];
@@ -1393,7 +1393,7 @@ int ftdi_write_data(struct ftdi_context *ftdi, const unsigned char *buf, int siz
     return offset;
 }
 
-static void ftdi_read_data_cb(struct libusb_transfer *transfer)
+static void LIBUSB_CALL ftdi_read_data_cb(struct libusb_transfer *transfer)
 {
     struct ftdi_transfer_control *tc = (struct ftdi_transfer_control *) transfer->user_data;
     struct ftdi_context *ftdi = tc->ftdi;
@@ -1475,7 +1475,7 @@ static void ftdi_read_data_cb(struct libusb_transfer *transfer)
 }
 
 
-static void ftdi_write_data_cb(struct libusb_transfer *transfer)
+static void LIBUSB_CALL ftdi_write_data_cb(struct libusb_transfer *transfer)
 {
     struct ftdi_transfer_control *tc = (struct ftdi_transfer_control *) transfer->user_data;
     struct ftdi_context *ftdi = tc->ftdi;
@@ -3059,7 +3059,8 @@ int ftdi_eeprom_build(struct ftdi_context *ftdi)
         case TYPE_230X:
             output[0x00] = 0x80; /* Actually, leave the default value */
             output[0x0a] = 0x08; /* Enable USB Serial Number */
-            output[0x0c] = (0x01) | (0x3 << 4); /* DBUS drive 4mA, CBUS drive 16mA */
+            /*FIXME: Make DBUS & CBUS Control configurable*/
+            output[0x0c] = 0;    /* DBUS drive 4mA, CBUS drive 4 mA like factory default */
             for (j = 0; j <= 6; j++)
             {
                 output[0x1a + j] = eeprom->cbus_function[j];
@@ -3122,6 +3123,8 @@ static unsigned char bit2type(unsigned char bits)
 /**
    Decode binary EEPROM image into an ftdi_eeprom structure.
 
+   For FT-X devices use AN_201 FT-X MTP memory Configuration to decode.
+
    \param ftdi pointer to ftdi_context
    \param verbose Decode EEPROM on stdout
 
@@ -3430,14 +3433,14 @@ int ftdi_eeprom_decode(struct ftdi_context *ftdi, int verbose)
                     channel_mode[eeprom->channel_a_type],
                     (eeprom->channel_a_driver)?" VCP":"",
                     (eeprom->high_current_a)?" High Current IO":"");
-        if (ftdi->type >= TYPE_232H)
+        if (ftdi->type == TYPE_232H)
         {
             fprintf(stdout,"FT1284 Mode Clock is idle %s, %s first, %sFlow Control\n",
                     (eeprom->clock_polarity)?"HIGH":"LOW",
                     (eeprom->data_order)?"LSB":"MSB",
                     (eeprom->flow_control)?"":"No ");
         }
-        if ((ftdi->type >= TYPE_2232C) && (ftdi->type != TYPE_R) && (ftdi->type != TYPE_232H))
+        if ((ftdi->type == TYPE_2232H) || (ftdi->type == TYPE_4232H))
             fprintf(stdout,"Channel B has Mode %s%s%s\n",
                     channel_mode[eeprom->channel_b_type],
                     (eeprom->channel_b_driver)?" VCP":"",
@@ -3500,7 +3503,7 @@ int ftdi_eeprom_decode(struct ftdi_context *ftdi, int verbose)
                                  "I2C_TXE#", "I2C_RXF#", "VBUS_SENSE", "BB_WR#",
                                  "BBRD#", "TIME_STAMP", "AWAKE#",
                                 };
-            fprintf(stdout,"IOBUS has %d mA drive%s%s\n",
+            fprintf(stdout,"DBUS has %d mA drive%s%s\n",
                     (eeprom->group0_drive+1) *4,
                     (eeprom->group0_schmitt)?" Schmitt Input":"",
                     (eeprom->group0_slew)?" Slow Slew":"");