if (eeprom == 0)
ftdi_error_return(-2, "Can't malloc struct ftdi_eeprom");
+ memset(eeprom, 0, sizeof(struct ftdi_eeprom));
ftdi->eeprom = eeprom;
/* All fine. Now allocate the readbuffer */
\param manufacturer String to use as Manufacturer
\param product String to use as Product description
\param serial String to use as Serial number description
-
+
\retval 0: all fine
\retval -1: No struct ftdi_context
\retval -2: No struct ftdi_eeprom
if (ftdi == NULL)
ftdi_error_return(-1, "No struct ftdi_context");
-
if (ftdi->eeprom == NULL)
ftdi_error_return(-2,"No struct ftdi_eeprom");
eeprom->usb_version = 0x0101;
else
eeprom->usb_version = 0x0200;
- eeprom->max_power = 50;
+ eeprom->max_power = 100;
if (eeprom->manufacturer)
free (eeprom->manufacturer);
if(ftdi->type == TYPE_R)
{
- eeprom->max_power = 45;
+ eeprom->max_power = 90;
eeprom->size = 0x80;
eeprom->cbus_function[0] = CBUS_TXLED;
eeprom->cbus_function[1] = CBUS_RXLED;
output = eeprom->buf;
if(eeprom->chip == -1)
- ftdi_error_return(-5,"No connected EEPROM or EEPROM Type unknown");
+ ftdi_error_return(-5,"No connected EEPROM or EEPROM type unknown");
if ((eeprom->chip == 0x56) || (eeprom->chip == 0x66))
eeprom->size = 0x100;
// Bit 7: always 1
// Bit 6: 1 if this device is self powered, 0 if bus powered
// Bit 5: 1 if this device uses remote wakeup
- // Bit 4: 1 if this device is battery powered
+ // Bit 4-0: reserved - 0
j = 0x80;
if (eeprom->self_powered == 1)
j |= 0x40;
output[i & k] = 0x00, i++;
}
output[0x11] = product_size*2 + 2;
-
+
// Addr 12: Offset of the serial string + 0x80, calculated later
// Addr 13: Length of serial string
output[0x12] = i | 0x80; // calculate offset
output[0x00] |= DRIVER_VCP;
else
output[0x00] &= ~DRIVER_VCP;
-
+
if ( eeprom->high_current_a == HIGH_CURRENT_DRIVE)
output[0x00] |= HIGH_CURRENT_DRIVE;
else
output[0x01] |= DRIVER_VCP;
else
output[0x01] &= ~DRIVER_VCP;
-
+
if ( eeprom->high_current_b == HIGH_CURRENT_DRIVE)
output[0x01] |= HIGH_CURRENT_DRIVE;
else
if(eeprom->high_current == HIGH_CURRENT_DRIVE_R)
output[0x00] |= HIGH_CURRENT_DRIVE_R;
output[0x01] = 0x40; /* Hard coded Endpoint Size*/
-
+
if (eeprom->suspend_pull_downs == 1)
output[0x0A] |= 0x4;
else
output[0x0B] = eeprom->invert;
output[0x0C] = eeprom->usb_version & 0xff;
output[0x0D] = (eeprom->usb_version>>8) & 0xff;
-
+
if(eeprom->cbus_function[0] > CBUS_BB)
output[0x14] = CBUS_TXLED;
else
output[0x14] = eeprom->cbus_function[0];
-
+
if(eeprom->cbus_function[1] > CBUS_BB)
output[0x14] |= CBUS_RXLED<<4;
else
output[0x14] |= eeprom->cbus_function[1]<<4;
-
+
if(eeprom->cbus_function[2] > CBUS_BB)
output[0x15] = CBUS_TXDEN;
else
output[0x15] = eeprom->cbus_function[2];
-
+
if(eeprom->cbus_function[3] > CBUS_BB)
output[0x15] |= CBUS_PWREN<<4;
else
output[0x15] |= eeprom->cbus_function[3]<<4;
-
+
if(eeprom->cbus_function[4] > CBUS_CLK6)
output[0x16] = CBUS_SLEEP;
else
output[0x00] |= DRIVER_VCP;
else
output[0x00] &= ~DRIVER_VCP;
-
+
output[0x01] = (eeprom->channel_b_type);
if ( eeprom->channel_b_driver == DRIVER_VCP)
output[0x01] |= DRIVER_VCP;
output[0x01] |= SUSPEND_DBUS7;
else
output[0x01] &= ~SUSPEND_DBUS7;
-
+
+ if (eeprom->suspend_pull_downs == 1)
+ output[0x0A] |= 0x4;
+ else
+ output[0x0A] &= ~0x4;
+
if(eeprom->group0_drive > DRIVE_16MA)
output[0x0c] |= DRIVE_16MA;
else
output[0x0c] |= IS_SCHMITT<<4;
if (eeprom->group1_slew == SLOW_SLEW)
output[0x0c] |= SLOW_SLEW<<4;
-
+
if(eeprom->group2_drive > DRIVE_16MA)
output[0x0d] |= DRIVE_16MA;
else
output[0x18] = eeprom->chip;
break;
+ case TYPE_4232H:
+ fprintf(stderr,"FIXME: Build FT4232H specific EEPROM settings\n");
}
// calculate checksum
}
else if ((ftdi->type == TYPE_2232H) ||(ftdi->type == TYPE_4232H))
{
- eeprom->high_current = buf[0x00] & HIGH_CURRENT_DRIVE_R;
+ eeprom->channel_a_type = buf[0x00] & 0x7;
eeprom->channel_a_driver = buf[0x00] & DRIVER_VCP;
eeprom->channel_b_type = buf[0x01] & 0x7;
eeprom->channel_b_driver = buf[0x01] & DRIVER_VCP;
\param eeprom_val Value to be written
\retval 0: all fine
- \retval -1: read failed
+ \retval -1: write failed
\retval -2: USB device unavailable
+ \retval -3: Invalid access to checksum protected area below 0x80
+ \retval -4: Device can't access unprotected area
+ \retval -5: Reading chip type failed
*/
-int ftdi_write_eeprom_location(struct ftdi_context *ftdi, int eeprom_addr, unsigned short eeprom_val)
+int ftdi_write_eeprom_location(struct ftdi_context *ftdi, int eeprom_addr,
+ unsigned short eeprom_val)
{
+ int chip_type_location;
+ unsigned short chip_type;
+
if (ftdi == NULL || ftdi->usb_dev == NULL)
ftdi_error_return(-2, "USB device unavailable");
+ if(eeprom_addr <0x80)
+ ftdi_error_return(-2, "Invalid access to checksum protected area below 0x80");
+
+
+ switch (ftdi->type)
+ {
+ case TYPE_BM:
+ case TYPE_2232C:
+ chip_type_location = 0x14;
+ break;
+ case TYPE_2232H:
+ case TYPE_4232H:
+ chip_type_location = 0x18;
+ break;
+ default:
+ ftdi_error_return(-4, "Device can't access unprotected area");
+ }
+
+ if (ftdi_read_eeprom_location( ftdi, chip_type_location>>1, &chip_type))
+ ftdi_error_return(-5, "Reading failed failed");
+ fprintf(stderr," loc 0x%04x val 0x%04x\n", chip_type_location,chip_type);
+ if((chip_type & 0xff) != 0x66)
+ {
+ ftdi_error_return(-6, "EEPROM is not of 93x66");
+ }
+
if (libusb_control_transfer(ftdi->usb_dev, FTDI_DEVICE_OUT_REQTYPE,
SIO_WRITE_EEPROM_REQUEST, eeprom_val, eeprom_addr,
NULL, 0, ftdi->usb_write_timeout) != 0)
Chip is 93x46 if magic is read at word position 0x00, as wraparound happens around 0x40
Chip is 93x56 if magic is read at word position 0x40, as wraparound happens around 0x80
Chip is 93x66 if magic is only read at word position 0xc0*/
- if( ftdi_write_eeprom_location(ftdi, 0xc0, MAGIC))
+ if (libusb_control_transfer(ftdi->usb_dev, FTDI_DEVICE_OUT_REQTYPE,
+ SIO_WRITE_EEPROM_REQUEST, MAGIC, 0xc0,
+ NULL, 0, ftdi->usb_write_timeout) != 0)
ftdi_error_return(-3, "Writing magic failed");
if (ftdi_read_eeprom_location( ftdi, 0x00, &eeprom_value))
ftdi_error_return(-4, "Reading failed failed");