\retval 0: all fine
\retval -1: couldn't allocate read buffer
+ \retval -2: couldn't allocate struct buffer
\remark This should be called before all functions
*/
int ftdi_init(struct ftdi_context *ftdi)
{
+ struct ftdi_eeprom* eeprom = (struct ftdi_eeprom *)malloc(sizeof(struct ftdi_eeprom));
ftdi->usb_ctx = NULL;
ftdi->usb_dev = NULL;
ftdi->usb_read_timeout = 5000;
ftdi->error_str = NULL;
- ftdi->eeprom = NULL;
+ if (eeprom == 0)
+ ftdi_error_return(-2, "Can't malloc struct ftdi_eeprom");
+ memset(eeprom, 0, sizeof(struct ftdi_eeprom));
+ ftdi->eeprom = eeprom;
/* All fine. Now allocate the readbuffer */
return ftdi_read_data_set_chunksize(ftdi, 4096);
free(ftdi->readbuffer);
ftdi->readbuffer = NULL;
}
+
+ if (ftdi->eeprom != NULL)
+ {
+ if (ftdi->eeprom->manufacturer != 0)
+ {
+ free(ftdi->eeprom->manufacturer);
+ ftdi->eeprom->manufacturer = 0;
+ }
+ if (ftdi->eeprom->product != 0)
+ {
+ free(ftdi->eeprom->product);
+ ftdi->eeprom->product = 0;
+ }
+ if (ftdi->eeprom->serial != 0)
+ {
+ free(ftdi->eeprom->serial);
+ ftdi->eeprom->serial = 0;
+ }
+ free(ftdi->eeprom);
+ ftdi->eeprom = NULL;
+ }
libusb_exit(ftdi->usb_ctx);
}
}
/**
- Set the eeprom size
-
- \param ftdi pointer to ftdi_context
- \param eeprom Pointer to ftdi_eeprom
- \param size
-
-*/
-void ftdi_eeprom_setsize(struct ftdi_context *ftdi, struct ftdi_eeprom *eeprom, int size)
-{
- if (ftdi == NULL)
- return;
-
- ftdi->eeprom = eeprom;
- ftdi->eeprom->size=size;
-}
-
-/**
Init eeprom with default values.
+ \param ftdi pointer to ftdi_context
+ \param manufacturer String to use as Manufacturer
+ \param product String to use as Product description
+ \param serial String to use as Serial number description
- \param eeprom Pointer to ftdi_eeprom
+ \retval 0: all fine
+ \retval -1: No struct ftdi_context
+ \retval -2: No struct ftdi_eeprom
*/
-void ftdi_eeprom_initdefaults(struct ftdi_context *ftdi)
+int ftdi_eeprom_initdefaults(struct ftdi_context *ftdi, char * manufacturer,
+ char * product, char * serial)
{
- int i;
struct ftdi_eeprom *eeprom;
if (ftdi == NULL)
- return;
+ ftdi_error_return(-1, "No struct ftdi_context");
if (ftdi->eeprom == NULL)
- return;
+ ftdi_error_return(-2,"No struct ftdi_eeprom");
eeprom = ftdi->eeprom;
+ memset(eeprom, 0, sizeof(struct ftdi_eeprom));
eeprom->vendor_id = 0x0403;
- eeprom->product_id = 0x6001;
-
- eeprom->self_powered = 1;
- eeprom->remote_wakeup = 1;
- eeprom->release = 0;
-
- eeprom->in_is_isochronous = 0;
- eeprom->out_is_isochronous = 0;
- eeprom->suspend_pull_downs = 0;
-
- eeprom->use_serial = 0;
- eeprom->change_usb_version = 0;
- eeprom->usb_version = 0x0200;
- eeprom->max_power = 0;
+ eeprom->use_serial = USE_SERIAL_NUM;
+ if((ftdi->type == TYPE_AM) || (ftdi->type == TYPE_BM) ||
+ (ftdi->type == TYPE_R))
+ eeprom->product_id = 0x6001;
+ else
+ eeprom->product_id = 0x6010;
+ if (ftdi->type == TYPE_AM)
+ eeprom->usb_version = 0x0101;
+ else
+ eeprom->usb_version = 0x0200;
+ eeprom->max_power = 100;
+ if (eeprom->manufacturer)
+ free (eeprom->manufacturer);
eeprom->manufacturer = NULL;
+ if (manufacturer)
+ {
+ eeprom->manufacturer = malloc(strlen(manufacturer)+1);
+ if (eeprom->manufacturer)
+ strcpy(eeprom->manufacturer, manufacturer);
+ }
+
+ if (eeprom->product)
+ free (eeprom->product);
eeprom->product = NULL;
- eeprom->serial = NULL;
- for (i=0; i < 5; i++)
{
- eeprom->cbus_function[i] = 0;
+ eeprom->product = malloc(strlen(product)+1);
+ if (eeprom->product)
+ strcpy(eeprom->product, product);
}
- eeprom->high_current = 0;
- eeprom->invert = 0;
- eeprom->size = FTDI_MAX_EEPROM_SIZE;
-}
+ if (eeprom->serial)
+ free (eeprom->serial);
+ eeprom->serial = NULL;
+ if (serial)
+ {
+ eeprom->serial = malloc(strlen(serial)+1);
+ if (eeprom->serial)
+ strcpy(eeprom->serial, serial);
+ }
-/**
- Frees allocated memory in eeprom.
- \param eeprom Pointer to ftdi_eeprom
-*/
-void ftdi_eeprom_free(struct ftdi_context *ftdi)
-{
- if (!ftdi)
- return;
- if (ftdi->eeprom)
+ if(ftdi->type == TYPE_R)
{
- struct ftdi_eeprom *eeprom = ftdi->eeprom;
-
- if (eeprom->manufacturer != 0) {
- free(eeprom->manufacturer);
- eeprom->manufacturer = 0;
- }
- if (eeprom->product != 0) {
- free(eeprom->product);
- eeprom->product = 0;
- }
- if (eeprom->serial != 0) {
- free(eeprom->serial);
- eeprom->serial = 0;
- }
+ eeprom->max_power = 90;
+ eeprom->size = 0x80;
+ eeprom->cbus_function[0] = CBUS_TXLED;
+ eeprom->cbus_function[1] = CBUS_RXLED;
+ eeprom->cbus_function[2] = CBUS_TXDEN;
+ eeprom->cbus_function[3] = CBUS_PWREN;
+ eeprom->cbus_function[4] = CBUS_SLEEP;
}
+ else
+ eeprom->size = -1;
+ return 0;
}
/**
- Build binary output from ftdi_eeprom structure.
+ Build binary buffer from ftdi_eeprom structure.
Output is suitable for ftdi_write_eeprom().
- \note This function doesn't handle FT2232x devices. Only FT232x.
- \param eeprom Pointer to ftdi_eeprom
- \param output Buffer of 128 bytes to store eeprom image to
+ \param ftdi pointer to ftdi_context
\retval >0: free eeprom size
\retval -1: eeprom size (128 bytes) exceeded by custom strings
\retval -3: Invalid cbus function setting
\retval -4: Chip doesn't support invert
\retval -5: Chip doesn't support high current drive
+ \retval -6: No connected EEPROM or EEPROM Type unknown
*/
-int ftdi_eeprom_build(struct ftdi_context *ftdi, unsigned char *output)
+int ftdi_eeprom_build(struct ftdi_context *ftdi)
{
- unsigned char i, j;
+ unsigned char i, j, k;
unsigned short checksum, value;
unsigned char manufacturer_size = 0, product_size = 0, serial_size = 0;
int size_check;
- const int cbus_max[5] = {13, 13, 13, 13, 9};
struct ftdi_eeprom *eeprom;
+ unsigned char * output;
if (ftdi == NULL)
ftdi_error_return(-2,"No context");
ftdi_error_return(-2,"No eeprom structure");
eeprom= ftdi->eeprom;
+ output = eeprom->buf;
+
+ if(eeprom->chip == -1)
+ ftdi_error_return(-5,"No connected EEPROM or EEPROM type unknown");
+
+ if ((eeprom->chip == 0x56) || (eeprom->chip == 0x66))
+ eeprom->size = 0x100;
+ else
+ eeprom->size = 0x80;
if (eeprom->manufacturer != NULL)
manufacturer_size = strlen(eeprom->manufacturer);
if (eeprom->serial != NULL)
serial_size = strlen(eeprom->serial);
- // highest allowed cbus value
- for (i = 0; i < 5; i++)
- {
- if ((eeprom->cbus_function[i] > cbus_max[i]) ||
- (eeprom->cbus_function[i] && ftdi->type != TYPE_R)) return -3;
- }
- if (ftdi->type != TYPE_R)
+ size_check = 0x80;
+ switch(ftdi->type)
{
- if (eeprom->invert) return -4;
- if (eeprom->high_current) return -5;
+ case TYPE_2232H:
+ case TYPE_4232H:
+ size_check -= 4;
+ case TYPE_R:
+ size_check -= 4;
+ case TYPE_2232C:
+ size_check -= 4;
+ case TYPE_AM:
+ case TYPE_BM:
+ size_check -= 0x14*2;
}
- size_check = eeprom->size;
- size_check -= 28; // 28 are always in use (fixed)
-
- // Top half of a 256byte eeprom is used just for strings and checksum
- // it seems that the FTDI chip will not read these strings from the lower half
- // Each string starts with two bytes; offset and type (0x03 for string)
- // the checksum needs two bytes, so without the string data that 8 bytes from the top half
- if (eeprom->size>=256) size_check = 120;
size_check -= manufacturer_size*2;
size_check -= product_size*2;
size_check -= serial_size*2;
+ /* Space for the string type and pointer bytes */
+ size_check -= -9;
+
// eeprom size exceeded?
if (size_check < 0)
return (-1);
// empty eeprom
- memset (output, 0, eeprom->size);
+ memset (ftdi->eeprom->buf, 0, FTDI_MAX_EEPROM_SIZE);
+
+ // Bytes and Bits set for all Types
- // Addr 00: High current IO
- output[0x00] = eeprom->high_current ? HIGH_CURRENT_DRIVE : 0;
- // Addr 01: IN endpoint size (for R type devices, different for FT2232)
- if (ftdi->type == TYPE_R) {
- output[0x01] = 0x40;
- }
// Addr 02: Vendor ID
output[0x02] = eeprom->vendor_id;
output[0x03] = eeprom->vendor_id >> 8;
// Addr 06: Device release number (0400h for BM features)
output[0x06] = 0x00;
- switch (eeprom->release) {
+ switch (ftdi->type) {
case TYPE_AM:
output[0x07] = 0x02;
break;
case TYPE_R:
output[0x07] = 0x06;
break;
+ case TYPE_2232H:
+ output[0x07] = 0x07;
+ break;
+ case TYPE_4232H:
+ output[0x07] = 0x08;
+ break;
default:
output[0x07] = 0x00;
}
output[0x08] = j;
// Addr 09: Max power consumption: max power = value * 2 mA
- output[0x09] = eeprom->max_power;
-
- // Addr 0A: Chip configuration
- // Bit 7: 0 - reserved
- // Bit 6: 0 - reserved
- // Bit 5: 0 - reserved
- // Bit 4: 1 - Change USB version
- // Bit 3: 1 - Use the serial number string
- // Bit 2: 1 - Enable suspend pull downs for lower power
- // Bit 1: 1 - Out EndPoint is Isochronous
- // Bit 0: 1 - In EndPoint is Isochronous
- //
- j = 0;
- if (eeprom->in_is_isochronous == 1)
- j = j | 1;
- if (eeprom->out_is_isochronous == 1)
- j = j | 2;
- if (eeprom->suspend_pull_downs == 1)
- j = j | 4;
- if (eeprom->use_serial == 1)
- j = j | 8;
- if (eeprom->change_usb_version == 1)
- j = j | 16;
- output[0x0A] = j;
-
- // Addr 0B: Invert data lines
- output[0x0B] = eeprom->invert & 0xff;
+ output[0x09] = eeprom->max_power>>1;
+
+ if(ftdi->type != TYPE_AM)
+ {
+ // Addr 0A: Chip configuration
+ // Bit 7: 0 - reserved
+ // Bit 6: 0 - reserved
+ // Bit 5: 0 - reserved
+ // Bit 4: 1 - Change USB version
+ // Bit 3: 1 - Use the serial number string
+ // Bit 2: 1 - Enable suspend pull downs for lower power
+ // Bit 1: 1 - Out EndPoint is Isochronous
+ // Bit 0: 1 - In EndPoint is Isochronous
+ //
+ j = 0;
+ if (eeprom->in_is_isochronous == 1)
+ j = j | 1;
+ if (eeprom->out_is_isochronous == 1)
+ j = j | 2;
+ output[0x0A] = j;
+ }
- // Addr 0C: USB version low byte when 0x0A bit 4 is set
- // Addr 0D: USB version high byte when 0x0A bit 4 is set
- if (eeprom->change_usb_version == 1)
+ // Dynamic content
+ // Strings start at 0x94 (TYPE_AM, TYPE_BM)
+ // 0x96 (TYPE_2232C), 0x98 (TYPE_R) and 0x9a (TYPE_x232H)
+ i = 0;
+ switch(ftdi->type)
{
- output[0x0C] = eeprom->usb_version;
- output[0x0D] = eeprom->usb_version >> 8;
+ case TYPE_2232H:
+ case TYPE_4232H:
+ i += 2;
+ case TYPE_R:
+ i += 2;
+ case TYPE_2232C:
+ i += 2;
+ case TYPE_AM:
+ case TYPE_BM:
+ i += 0x94;
}
-
+ /* Wrap around 0x80 for 128 byte EEPROMS (Internale and 93x46) */
+ k = eeprom->size -1;
// Addr 0E: Offset of the manufacturer string + 0x80, calculated later
// Addr 0F: Length of manufacturer string
+ // Output manufacturer
+ output[0x0E] = i; // calculate offset
+ output[i++ & k] = manufacturer_size*2 + 2;
+ output[i++ & k] = 0x03; // type: string
+ for (j = 0; j < manufacturer_size; j++)
+ {
+ output[i & k] = eeprom->manufacturer[j], i++;
+ output[i & k] = 0x00, i++;
+ }
output[0x0F] = manufacturer_size*2 + 2;
// Addr 10: Offset of the product string + 0x80, calculated later
// Addr 11: Length of product string
+ output[0x10] = i | 0x80; // calculate offset
+ output[i & k] = product_size*2 + 2, i++;
+ output[i & k] = 0x03, i++;
+ for (j = 0; j < product_size; j++)
+ {
+ output[i & k] = eeprom->product[j], i++;
+ output[i & k] = 0x00, i++;
+ }
output[0x11] = product_size*2 + 2;
-
+
// Addr 12: Offset of the serial string + 0x80, calculated later
// Addr 13: Length of serial string
- output[0x13] = serial_size*2 + 2;
-
- // Addr 14: CBUS function: CBUS0, CBUS1
- // Addr 15: CBUS function: CBUS2, CBUS3
- // Addr 16: CBUS function: CBUS5
- output[0x14] = eeprom->cbus_function[0] | (eeprom->cbus_function[1] << 4);
- output[0x15] = eeprom->cbus_function[2] | (eeprom->cbus_function[3] << 4);
- output[0x16] = eeprom->cbus_function[4];
- // Addr 17: Unknown
-
- // Dynamic content
- // In images produced by FTDI's FT_Prog for FT232R strings start at 0x18
- // Space till 0x18 should be considered as reserved.
- if (ftdi->type >= TYPE_R) {
- i = 0x18;
- } else {
- i = 0x14;
+ output[0x12] = i | 0x80; // calculate offset
+ output[i & k] = serial_size*2 + 2, i++;
+ output[i & k] = 0x03, i++;
+ for (j = 0; j < serial_size; j++)
+ {
+ output[i & k] = eeprom->serial[j], i++;
+ output[i & k] = 0x00, i++;
}
- if (eeprom->size >= 256) i = 0x80;
+ output[i & k] = 0x02; /* as seen when written with FTD2XX */
+ i++;
+ output[i & k] = 0x03; /* as seen when written with FTD2XX */
+ i++;
+ output[i & k] = eeprom->is_not_pnp; /* as seen when written with FTD2XX */
+ i++;
+ output[0x13] = serial_size*2 + 2;
- // Output manufacturer
- output[0x0E] = i | 0x80; // calculate offset
- output[i++] = manufacturer_size*2 + 2;
- output[i++] = 0x03; // type: string
- for (j = 0; j < manufacturer_size; j++)
+ if(ftdi->type > TYPE_AM) /*use_serial not used in AM devices*/
{
- output[i] = eeprom->manufacturer[j], i++;
- output[i] = 0x00, i++;
+ if (eeprom->use_serial == USE_SERIAL_NUM )
+ output[0x0A] |= USE_SERIAL_NUM;
+ else
+ output[0x0A] &= ~USE_SERIAL_NUM;
}
+ /* Fixme: ftd2xx seems to append 0x02, 0x03 and 0x01 for PnP = 0 or 0x00 else */
+ // calculate checksum
- // Output product name
- output[0x10] = i | 0x80; // calculate offset
- output[i] = product_size*2 + 2, i++;
- output[i] = 0x03, i++;
- for (j = 0; j < product_size; j++)
+ /* Bytes and Bits specific to (some) types
+ Write linear, as this allows easier fixing*/
+ switch(ftdi->type)
{
- output[i] = eeprom->product[j], i++;
- output[i] = 0x00, i++;
- }
+ case TYPE_AM:
+ break;
+ case TYPE_BM:
+ output[0x0C] = eeprom->usb_version & 0xff;
+ output[0x0D] = (eeprom->usb_version>>8) & 0xff;
+ output[0x14] = eeprom->chip;
+ break;
+ case TYPE_2232C:
+
+ output[0x00] = (eeprom->channel_a_type);
+ if ( eeprom->channel_a_driver == DRIVER_VCP)
+ output[0x00] |= DRIVER_VCP;
+ else
+ output[0x00] &= ~DRIVER_VCP;
- // Output serial
- output[0x12] = i | 0x80; // calculate offset
- output[i] = serial_size*2 + 2, i++;
- output[i] = 0x03, i++;
- for (j = 0; j < serial_size; j++)
- {
- output[i] = eeprom->serial[j], i++;
- output[i] = 0x00, i++;
+ if ( eeprom->high_current_a == HIGH_CURRENT_DRIVE)
+ output[0x00] |= HIGH_CURRENT_DRIVE;
+ else
+ output[0x00] &= ~HIGH_CURRENT_DRIVE;
+
+ output[0x01] = (eeprom->channel_b_type);
+ if ( eeprom->channel_b_driver == DRIVER_VCP)
+ output[0x01] |= DRIVER_VCP;
+ else
+ output[0x01] &= ~DRIVER_VCP;
+
+ if ( eeprom->high_current_b == HIGH_CURRENT_DRIVE)
+ output[0x01] |= HIGH_CURRENT_DRIVE;
+ else
+ output[0x01] &= ~HIGH_CURRENT_DRIVE;
+
+ if (eeprom->in_is_isochronous == 1)
+ output[0x0A] |= 0x1;
+ else
+ output[0x0A] &= ~0x1;
+ if (eeprom->out_is_isochronous == 1)
+ output[0x0A] |= 0x2;
+ else
+ output[0x0A] &= ~0x2;
+ if (eeprom->suspend_pull_downs == 1)
+ output[0x0A] |= 0x4;
+ else
+ output[0x0A] &= ~0x4;
+ output[0x0C] = eeprom->usb_version & 0xff;
+ output[0x0D] = (eeprom->usb_version>>8) & 0xff;
+ output[0x14] = eeprom->chip;
+ break;
+ case TYPE_R:
+ if(eeprom->high_current == HIGH_CURRENT_DRIVE_R)
+ output[0x00] |= HIGH_CURRENT_DRIVE_R;
+ output[0x01] = 0x40; /* Hard coded Endpoint Size*/
+
+ if (eeprom->suspend_pull_downs == 1)
+ output[0x0A] |= 0x4;
+ else
+ output[0x0A] &= ~0x4;
+ output[0x0B] = eeprom->invert;
+ output[0x0C] = eeprom->usb_version & 0xff;
+ output[0x0D] = (eeprom->usb_version>>8) & 0xff;
+
+ if(eeprom->cbus_function[0] > CBUS_BB)
+ output[0x14] = CBUS_TXLED;
+ else
+ output[0x14] = eeprom->cbus_function[0];
+
+ if(eeprom->cbus_function[1] > CBUS_BB)
+ output[0x14] |= CBUS_RXLED<<4;
+ else
+ output[0x14] |= eeprom->cbus_function[1]<<4;
+
+ if(eeprom->cbus_function[2] > CBUS_BB)
+ output[0x15] = CBUS_TXDEN;
+ else
+ output[0x15] = eeprom->cbus_function[2];
+
+ if(eeprom->cbus_function[3] > CBUS_BB)
+ output[0x15] |= CBUS_PWREN<<4;
+ else
+ output[0x15] |= eeprom->cbus_function[3]<<4;
+
+ if(eeprom->cbus_function[4] > CBUS_CLK6)
+ output[0x16] = CBUS_SLEEP;
+ else
+ output[0x16] = eeprom->cbus_function[4];
+ break;
+ case TYPE_2232H:
+ output[0x00] = (eeprom->channel_a_type);
+ if ( eeprom->channel_a_driver == DRIVER_VCP)
+ output[0x00] |= DRIVER_VCP;
+ else
+ output[0x00] &= ~DRIVER_VCP;
+
+ output[0x01] = (eeprom->channel_b_type);
+ if ( eeprom->channel_b_driver == DRIVER_VCP)
+ output[0x01] |= DRIVER_VCP;
+ else
+ output[0x01] &= ~DRIVER_VCP;
+ if(eeprom->suspend_dbus7 == SUSPEND_DBUS7)
+ output[0x01] |= SUSPEND_DBUS7;
+ else
+ output[0x01] &= ~SUSPEND_DBUS7;
+
+ if (eeprom->suspend_pull_downs == 1)
+ output[0x0A] |= 0x4;
+ else
+ output[0x0A] &= ~0x4;
+
+ if(eeprom->group0_drive > DRIVE_16MA)
+ output[0x0c] |= DRIVE_16MA;
+ else
+ output[0x0c] |= eeprom->group0_drive;
+ if (eeprom->group0_schmitt == IS_SCHMITT)
+ output[0x0c] |= IS_SCHMITT;
+ if (eeprom->group0_slew == SLOW_SLEW)
+ output[0x0c] |= SLOW_SLEW;
+
+ if(eeprom->group1_drive > DRIVE_16MA)
+ output[0x0c] |= DRIVE_16MA<<4;
+ else
+ output[0x0c] |= eeprom->group1_drive<<4;
+ if (eeprom->group1_schmitt == IS_SCHMITT)
+ output[0x0c] |= IS_SCHMITT<<4;
+ if (eeprom->group1_slew == SLOW_SLEW)
+ output[0x0c] |= SLOW_SLEW<<4;
+
+ if(eeprom->group2_drive > DRIVE_16MA)
+ output[0x0d] |= DRIVE_16MA;
+ else
+ output[0x0d] |= eeprom->group2_drive;
+ if (eeprom->group2_schmitt == IS_SCHMITT)
+ output[0x0d] |= IS_SCHMITT;
+ if (eeprom->group2_slew == SLOW_SLEW)
+ output[0x0d] |= SLOW_SLEW;
+
+ if(eeprom->group3_drive > DRIVE_16MA)
+ output[0x0d] |= DRIVE_16MA<<4;
+ else
+ output[0x0d] |= eeprom->group3_drive<<4;
+ if (eeprom->group3_schmitt == IS_SCHMITT)
+ output[0x0d] |= IS_SCHMITT<<4;
+ if (eeprom->group3_slew == SLOW_SLEW)
+ output[0x0d] |= SLOW_SLEW<<4;
+
+ output[0x18] = eeprom->chip;
+
+ break;
+ case TYPE_4232H:
+ fprintf(stderr,"FIXME: Build FT4232H specific EEPROM settings\n");
}
// calculate checksum
/**
Decode binary EEPROM image into an ftdi_eeprom structure.
- \param eeprom Pointer to ftdi_eeprom which will be filled in.
- \param buf Buffer of \a size bytes of raw eeprom data
- \param size size size of eeprom data in bytes
-
+ \param ftdi pointer to ftdi_context
+ \param verbose Decode EEPROM on stdout
+
\retval 0: all fine
\retval -1: something went wrong
FIXME: How to pass size? How to handle size field in ftdi_eeprom?
FIXME: Strings are malloc'ed here and should be freed somewhere
*/
-int ftdi_eeprom_decode(struct ftdi_context *ftdi, unsigned char *buf, int size, int verbose)
+int ftdi_eeprom_decode(struct ftdi_context *ftdi, int verbose)
{
unsigned char i, j;
unsigned short checksum, eeprom_checksum, value;
unsigned char manufacturer_size = 0, product_size = 0, serial_size = 0;
int eeprom_size;
struct ftdi_eeprom *eeprom;
+ unsigned char *buf = ftdi->eeprom->buf;
+ int release;
if (ftdi == NULL)
ftdi_error_return(-1,"No context");
if (ftdi->eeprom == NULL)
- ftdi_error_return(-1,"No eeprom");
+ ftdi_error_return(-1,"No eeprom structure");
- eeprom_size = ftdi->eeprom->size;
- if(ftdi->type == TYPE_R)
- eeprom_size = 0x80;
eeprom = ftdi->eeprom;
+ eeprom_size = eeprom->size;
// Addr 02: Vendor ID
eeprom->vendor_id = buf[0x02] + (buf[0x03] << 8);
// Addr 04: Product ID
eeprom->product_id = buf[0x04] + (buf[0x05] << 8);
- eeprom->release = buf[0x06] + (buf[0x07]<<8);
+ release = buf[0x06] + (buf[0x07]<<8);
// Addr 08: Config descriptor
// Bit 7: always 1
eeprom->in_is_isochronous = buf[0x0A]&0x01;
eeprom->out_is_isochronous = buf[0x0A]&0x02;
eeprom->suspend_pull_downs = buf[0x0A]&0x04;
- eeprom->use_serial = buf[0x0A]&0x08;
- eeprom->change_usb_version = buf[0x0A]&0x10;
+ eeprom->use_serial = buf[0x0A] & USE_SERIAL_NUM;
+ if(buf[0x0A]&0x10)
+ fprintf(stderr,
+ "EEPROM byte[0x0a] Bit 4 unexpected set. If this happened with the EEPROM\n"
+ "programmed by FTDI tools, please report to libftdi@developer.intra2net.com\n");
- // Addr 0C: USB version low byte when 0x0A bit 4 is set
- // Addr 0D: USB version high byte when 0x0A bit 4 is set
- if ((eeprom->change_usb_version == 1) || ftdi->type == TYPE_2232C)
- {
- eeprom->usb_version = buf[0x0C] + (buf[0x0D] << 8);
- }
+ // Addr 0C: USB version low byte when 0x0A
+ // Addr 0D: USB version high byte when 0x0A
+ eeprom->usb_version = buf[0x0C] + (buf[0x0D] << 8);
// Addr 0E: Offset of the manufacturer string + 0x80, calculated later
// Addr 0F: Length of manufacturer string
manufacturer_size = buf[0x0F]/2;
+ if(eeprom->manufacturer)
+ free(eeprom->manufacturer);
if (manufacturer_size > 0)
{
eeprom->manufacturer = malloc(manufacturer_size);
// Addr 10: Offset of the product string + 0x80, calculated later
// Addr 11: Length of product string
+ if(eeprom->product)
+ free(eeprom->product);
product_size = buf[0x11]/2;
if (product_size > 0)
{
// Addr 12: Offset of the serial string + 0x80, calculated later
// Addr 13: Length of serial string
+ if(eeprom->serial)
+ free(eeprom->serial);
serial_size = buf[0x13]/2;
if (serial_size > 0)
{
ftdi_error_return(-1,"EEPROM checksum error");
}
- else if ((ftdi->type == TYPE_AM) || (ftdi->type == TYPE_BM))
+ eeprom->channel_a_type = 0;
+ if ((ftdi->type == TYPE_AM) || (ftdi->type == TYPE_BM))
{
- eeprom->chip = buf[14];
+ eeprom->chip = -1;
}
else if(ftdi->type == TYPE_2232C)
{
- eeprom->chip = buf[14];
+ eeprom->channel_a_type = buf[0x00] & 0x7;
+ eeprom->channel_a_driver = buf[0x00] & DRIVER_VCP;
+ eeprom->high_current_a = buf[0x00] & HIGH_CURRENT_DRIVE;
+ eeprom->channel_b_type = buf[0x01] & 0x7;
+ eeprom->channel_b_driver = buf[0x01] & DRIVER_VCP;
+ eeprom->high_current_b = buf[0x01] & HIGH_CURRENT_DRIVE;
+ eeprom->chip = buf[0x14];
}
else if(ftdi->type == TYPE_R)
{
+ /* TYPE_R flags D2XX, not VCP as all others*/
+ eeprom->channel_a_driver = (~buf[0x00]) & DRIVER_VCP;
+ eeprom->high_current = buf[0x00] & HIGH_CURRENT_DRIVE_R;
+ if( (buf[0x01]&0x40) != 0x40)
+ fprintf(stderr,
+ "TYPE_R EEPROM byte[0x01] Bit 6 unexpected Endpoint size."
+ " If this happened with the\n"
+ " EEPROM programmed by FTDI tools, please report "
+ "to libftdi@developer.intra2net.com\n");
+
+ eeprom->chip = buf[0x16];
// Addr 0B: Invert data lines
// Works only on FT232R, not FT245R, but no way to distinguish
eeprom->invert = buf[0x0B];
eeprom->cbus_function[3] = (buf[0x15] >> 4) & 0x0f;
eeprom->cbus_function[4] = buf[0x16] & 0x0f;
}
- else if (ftdi->type == TYPE_2232H)
- {
- }
- else if (ftdi->type == TYPE_4232H)
- {
+ else if ((ftdi->type == TYPE_2232H) ||(ftdi->type == TYPE_4232H))
+ {
+ eeprom->channel_a_type = buf[0x00] & 0x7;
+ eeprom->channel_a_driver = buf[0x00] & DRIVER_VCP;
+ eeprom->channel_b_type = buf[0x01] & 0x7;
+ eeprom->channel_b_driver = buf[0x01] & DRIVER_VCP;
+
+ if(ftdi->type == TYPE_2232H)
+ eeprom->suspend_dbus7 = buf[0x01] & SUSPEND_DBUS7;
+
+ eeprom->chip = buf[0x18];
+ eeprom->group0_drive = buf[0x0c] & DRIVE_16MA;
+ eeprom->group0_schmitt = buf[0x0c] & IS_SCHMITT;
+ eeprom->group0_slew = buf[0x0c] & SLOW_SLEW;
+ eeprom->group1_drive = (buf[0x0c] >> 4) & 0x3;
+ eeprom->group1_schmitt = (buf[0x0c] >> 4) & IS_SCHMITT;
+ eeprom->group1_slew = (buf[0x0c] >> 4) & SLOW_SLEW;
+ eeprom->group2_drive = buf[0x0d] & DRIVE_16MA;
+ eeprom->group2_schmitt = buf[0x0d] & IS_SCHMITT;
+ eeprom->group2_slew = buf[0x0d] & SLOW_SLEW;
+ eeprom->group3_drive = (buf[0x0d] >> 4) & DRIVE_16MA;
+ eeprom->group3_schmitt = (buf[0x0d] >> 4) & IS_SCHMITT;
+ eeprom->group3_slew = (buf[0x0d] >> 4) & SLOW_SLEW;
}
if(verbose)
{
+ char *channel_mode[] = {"UART","245","CPU", "unknown", "OPTO"};
fprintf(stdout, "VID: 0x%04x\n",eeprom->vendor_id);
fprintf(stdout, "PID: 0x%04x\n",eeprom->product_id);
- fprintf(stdout, "Release: 0x%04x\n",eeprom->release);
+ fprintf(stdout, "Release: 0x%04x\n",release);
if(eeprom->self_powered)
fprintf(stdout, "Self-Powered%s", (eeprom->remote_wakeup)?", USB Remote Wake Up\n":"\n");
else
- fprintf(stdout, "Bus Powered: %3d mA%s", eeprom->max_power*2,
+ fprintf(stdout, "Bus Powered: %3d mA%s", eeprom->max_power * 2,
(eeprom->remote_wakeup)?" USB Remote Wake Up\n":"\n");
if(eeprom->manufacturer)
fprintf(stdout, "Manufacturer: %s\n",eeprom->manufacturer);
fprintf(stdout, "Product: %s\n",eeprom->product);
if(eeprom->serial)
fprintf(stdout, "Serial: %s\n",eeprom->serial);
- fprintf(stderr, "Checksum : %04x\n", checksum);
-
+ fprintf(stdout, "Checksum : %04x\n", checksum);
+ if (ftdi->type == TYPE_R)
+ fprintf(stdout, "Internal EEPROM\n");
+ else if (eeprom->chip >= 0x46)
+ fprintf(stdout, "Attached EEPROM: 93x%02x\n", eeprom->chip);
+ if(eeprom->suspend_dbus7)
+ fprintf(stdout, "Suspend on DBUS7\n");
+ if(eeprom->suspend_pull_downs)
+ fprintf(stdout, "Pull IO pins low during suspend\n");
+ if(eeprom->remote_wakeup)
+ fprintf(stdout, "Enable Remote Wake Up\n");
+ fprintf(stdout, "PNP: %d\n",(eeprom->is_not_pnp)?0:1);
+ if (ftdi->type >= TYPE_2232C)
+ fprintf(stdout,"Channel A has Mode %s%s%s\n",
+ channel_mode[eeprom->channel_a_type],
+ (eeprom->channel_a_driver)?" VCP":"",
+ (eeprom->high_current_a)?" High Current IO":"");
+ if ((ftdi->type >= TYPE_2232C) && (ftdi->type != TYPE_R))
+ fprintf(stdout,"Channel B has Mode %s%s%s\n",
+ channel_mode[eeprom->channel_b_type],
+ (eeprom->channel_b_driver)?" VCP":"",
+ (eeprom->high_current_b)?" High Current IO":"");
+ if ((ftdi->type == TYPE_2232H) || (ftdi->type == TYPE_4232H))
+ {
+ fprintf(stdout,"%s has %d mA drive%s%s\n",
+ (ftdi->type == TYPE_2232H)?"AL":"A",
+ (eeprom->group0_drive+1) *4,
+ (eeprom->group0_schmitt)?" Schmitt Input":"",
+ (eeprom->group0_slew)?" Slow Slew":"");
+ fprintf(stdout,"%s has %d mA drive%s%s\n",
+ (ftdi->type == TYPE_2232H)?"AH":"B",
+ (eeprom->group1_drive+1) *4,
+ (eeprom->group1_schmitt)?" Schmitt Input":"",
+ (eeprom->group1_slew)?" Slow Slew":"");
+ fprintf(stdout,"%s has %d mA drive%s%s\n",
+ (ftdi->type == TYPE_2232H)?"BL":"C",
+ (eeprom->group2_drive+1) *4,
+ (eeprom->group2_schmitt)?" Schmitt Input":"",
+ (eeprom->group2_slew)?" Slow Slew":"");
+ fprintf(stdout,"%s has %d mA drive%s%s\n",
+ (ftdi->type == TYPE_2232H)?"BH":"D",
+ (eeprom->group3_drive+1) *4,
+ (eeprom->group3_schmitt)?" Schmitt Input":"",
+ (eeprom->group3_slew)?" Slow Slew":"");
+ }
+ if (ftdi->type == TYPE_R)
+ {
+ char *cbus_mux[] = {"TXDEN","PWREN","RXLED", "TXLED","TX+RXLED",
+ "SLEEP","CLK48","CLK24","CLK12","CLK6",
+ "IOMODE","BB_WR","BB_RD"};
+ char *cbus_BB[] = {"RXF","TXE","RD", "WR"};
+ int i;
+
+ if(eeprom->invert)
+ {
+ char *r_bits[] = {"TXD","RXD","RTS", "CTS","DTR","DSR","DCD","RI"};
+ fprintf(stdout,"Inverted bits:");
+ for (i=0; i<8; i++)
+ if((eeprom->invert & (1<<i)) == (1<<i))
+ fprintf(stdout," %s",r_bits[i]);
+ fprintf(stdout,"\n");
+ }
+ for(i=0; i<5; i++)
+ {
+ if(eeprom->cbus_function[i]<CBUS_BB)
+ fprintf(stdout,"C%d Function: %s\n", i,
+ cbus_mux[eeprom->cbus_function[i]]);
+ else
+ fprintf(stdout,"C%d BB Function: %s\n", i,
+ cbus_BB[i]);
+ }
+ }
}
-
return 0;
}
Read eeprom
\param ftdi pointer to ftdi_context
- \param eeprom Pointer to store eeprom into
\retval 0: all fine
\retval -1: read failed
\retval -2: USB device unavailable
*/
-int ftdi_read_eeprom(struct ftdi_context *ftdi, unsigned char *eeprom)
+int ftdi_read_eeprom(struct ftdi_context *ftdi)
{
int i;
+ unsigned char *buf;
if (ftdi == NULL || ftdi->usb_dev == NULL)
ftdi_error_return(-2, "USB device unavailable");
+ buf = ftdi->eeprom->buf;
for (i = 0; i < FTDI_MAX_EEPROM_SIZE/2; i++)
{
- if (libusb_control_transfer(ftdi->usb_dev, FTDI_DEVICE_IN_REQTYPE, SIO_READ_EEPROM_REQUEST, 0, i, eeprom+(i*2), 2, ftdi->usb_read_timeout) != 2)
+ if (libusb_control_transfer(
+ ftdi->usb_dev, FTDI_DEVICE_IN_REQTYPE,SIO_READ_EEPROM_REQUEST, 0, i,
+ buf+(i*2), 2, ftdi->usb_read_timeout) != 2)
ftdi_error_return(-1, "reading eeprom failed");
}
if (ftdi->type == TYPE_R)
- ftdi->eeprom->size = 0xa0;
+ ftdi->eeprom->size = 0x80;
/* Guesses size of eeprom by comparing halves
- will not work with blank eeprom */
- else if (strrchr((const char *)eeprom, 0xff) == ((const char *)eeprom +FTDI_MAX_EEPROM_SIZE -1))
+ else if (strrchr((const char *)buf, 0xff) == ((const char *)buf +FTDI_MAX_EEPROM_SIZE -1))
ftdi->eeprom->size = -1;
- else if(memcmp(eeprom,&eeprom[0x80],0x80) == 0)
+ else if(memcmp(buf,&buf[0x80],0x80) == 0)
ftdi->eeprom->size = 0x80;
- else if(memcmp(eeprom,&eeprom[0x40],0x40) == 0)
+ else if(memcmp(buf,&buf[0x40],0x40) == 0)
ftdi->eeprom->size = 0x40;
else
ftdi->eeprom->size = 0x100;
\param eeprom_val Value to be written
\retval 0: all fine
- \retval -1: read failed
+ \retval -1: write failed
\retval -2: USB device unavailable
+ \retval -3: Invalid access to checksum protected area below 0x80
+ \retval -4: Device can't access unprotected area
+ \retval -5: Reading chip type failed
*/
-int ftdi_write_eeprom_location(struct ftdi_context *ftdi, int eeprom_addr, unsigned short eeprom_val)
+int ftdi_write_eeprom_location(struct ftdi_context *ftdi, int eeprom_addr,
+ unsigned short eeprom_val)
{
+ int chip_type_location;
+ unsigned short chip_type;
+
if (ftdi == NULL || ftdi->usb_dev == NULL)
ftdi_error_return(-2, "USB device unavailable");
+ if(eeprom_addr <0x80)
+ ftdi_error_return(-2, "Invalid access to checksum protected area below 0x80");
+
+
+ switch (ftdi->type)
+ {
+ case TYPE_BM:
+ case TYPE_2232C:
+ chip_type_location = 0x14;
+ break;
+ case TYPE_2232H:
+ case TYPE_4232H:
+ chip_type_location = 0x18;
+ break;
+ default:
+ ftdi_error_return(-4, "Device can't access unprotected area");
+ }
+
+ if (ftdi_read_eeprom_location( ftdi, chip_type_location>>1, &chip_type))
+ ftdi_error_return(-5, "Reading failed failed");
+ fprintf(stderr," loc 0x%04x val 0x%04x\n", chip_type_location,chip_type);
+ if((chip_type & 0xff) != 0x66)
+ {
+ ftdi_error_return(-6, "EEPROM is not of 93x66");
+ }
+
if (libusb_control_transfer(ftdi->usb_dev, FTDI_DEVICE_OUT_REQTYPE,
SIO_WRITE_EEPROM_REQUEST, eeprom_val, eeprom_addr,
NULL, 0, ftdi->usb_write_timeout) != 0)
Write eeprom
\param ftdi pointer to ftdi_context
- \param eeprom Pointer to read eeprom from
-
+
\retval 0: all fine
\retval -1: read failed
\retval -2: USB device unavailable
*/
-int ftdi_write_eeprom(struct ftdi_context *ftdi, unsigned char *eeprom)
+int ftdi_write_eeprom(struct ftdi_context *ftdi)
{
unsigned short usb_val, status;
int i, ret;
+ unsigned char *eeprom;
if (ftdi == NULL || ftdi->usb_dev == NULL)
ftdi_error_return(-2, "USB device unavailable");
+ eeprom = ftdi->eeprom->buf;
/* These commands were traced while running MProg */
if ((ret = ftdi_usb_reset(ftdi)) != 0)
\retval 0: all fine
\retval -1: erase failed
\retval -2: USB device unavailable
+ \retval -3: Writing magic failed
+ \retval -4: Read EEPROM failed
+ \retval -5: Unexpected EEPROM value
*/
+#define MAGIC 0x55aa
int ftdi_erase_eeprom(struct ftdi_context *ftdi)
{
+ unsigned short eeprom_value;
if (ftdi == NULL || ftdi->usb_dev == NULL)
ftdi_error_return(-2, "USB device unavailable");
- if (libusb_control_transfer(ftdi->usb_dev, FTDI_DEVICE_OUT_REQTYPE, SIO_ERASE_EEPROM_REQUEST, 0, 0, NULL, 0, ftdi->usb_write_timeout) < 0)
+ if(ftdi->type == TYPE_R)
+ {
+ ftdi->eeprom->chip = 0;
+ return 0;
+ }
+
+ if (libusb_control_transfer(ftdi->usb_dev, FTDI_DEVICE_OUT_REQTYPE, SIO_ERASE_EEPROM_REQUEST,
+ 0, 0, NULL, 0, ftdi->usb_write_timeout) < 0)
ftdi_error_return(-1, "unable to erase eeprom");
+
+ /* detect chip type by writing 0x55AA as magic at word position 0xc0
+ Chip is 93x46 if magic is read at word position 0x00, as wraparound happens around 0x40
+ Chip is 93x56 if magic is read at word position 0x40, as wraparound happens around 0x80
+ Chip is 93x66 if magic is only read at word position 0xc0*/
+ if (libusb_control_transfer(ftdi->usb_dev, FTDI_DEVICE_OUT_REQTYPE,
+ SIO_WRITE_EEPROM_REQUEST, MAGIC, 0xc0,
+ NULL, 0, ftdi->usb_write_timeout) != 0)
+ ftdi_error_return(-3, "Writing magic failed");
+ if (ftdi_read_eeprom_location( ftdi, 0x00, &eeprom_value))
+ ftdi_error_return(-4, "Reading failed failed");
+ if(eeprom_value == MAGIC)
+ {
+ ftdi->eeprom->chip = 0x46;
+ }
+ else
+ {
+ if (ftdi_read_eeprom_location( ftdi, 0x40, &eeprom_value))
+ ftdi_error_return(-4, "Reading failed failed");
+ if(eeprom_value == MAGIC)
+ ftdi->eeprom->chip = 0x56;
+ else
+ {
+ if (ftdi_read_eeprom_location( ftdi, 0xc0, &eeprom_value))
+ ftdi_error_return(-4, "Reading failed failed");
+ if(eeprom_value == MAGIC)
+ ftdi->eeprom->chip = 0x66;
+ else
+ {
+ ftdi->eeprom->chip = -1;
+ }
+ }
+ }
+ if (libusb_control_transfer(ftdi->usb_dev, FTDI_DEVICE_OUT_REQTYPE, SIO_ERASE_EEPROM_REQUEST,
+ 0, 0, NULL, 0, ftdi->usb_write_timeout) < 0)
+ ftdi_error_return(-1, "unable to erase eeprom");
return 0;
}