/* stuff needed for async write */
#ifdef LIBFTDI_LINUX_ASYNC_MODE
- #include <sys/ioctl.h>
- #include <sys/time.h>
- #include <sys/select.h>
- #include <sys/types.h>
- #include <unistd.h>
- #include <linux/usbdevice_fs.h>
+#include <sys/ioctl.h>
+#include <sys/time.h>
+#include <sys/select.h>
+#include <sys/types.h>
+#include <unistd.h>
+#include <linux/usbdevice_fs.h>
#endif
#define ftdi_error_return(code, str) do { \
return code; \
} while(0);
+/**
+ Internal function to close usb device pointer.
+ Sets ftdi->usb_dev to NULL.
+ \internal
+
+ \param ftdi pointer to ftdi_context
+
+ \retval zero if all is fine, otherwise error code from usb_close()
+*/
+static int ftdi_usb_close_internal (struct ftdi_context *ftdi)
+{
+ int ret = 0;
+
+ if (ftdi->usb_dev)
+ {
+ ret = usb_close (ftdi->usb_dev);
+ ftdi->usb_dev = NULL;
+ }
+
+ return ret;
+}
/**
Initializes a ftdi_context.
*/
int ftdi_init(struct ftdi_context *ftdi)
{
- int i;
+ unsigned int i;
ftdi->usb_dev = NULL;
ftdi->usb_read_timeout = 5000;
\return a pointer to a new ftdi_context, or NULL on failure
*/
-struct ftdi_context *ftdi_new()
+struct ftdi_context *ftdi_new(void)
{
struct ftdi_context * ftdi = (struct ftdi_context *)malloc(sizeof(struct ftdi_context));
- if (ftdi == NULL) {
+ if (ftdi == NULL)
+ {
return NULL;
}
- if (ftdi_init(ftdi) != 0) {
+ if (ftdi_init(ftdi) != 0)
+ {
free(ftdi);
return NULL;
}
Open selected channels on a chip, otherwise use first channel.
\param ftdi pointer to ftdi_context
- \param interface Interface to use for FT2232C chips.
+ \param interface Interface to use for FT2232C/2232H/4232H chips.
\retval 0: all fine
\retval -1: unknown interface
*/
int ftdi_set_interface(struct ftdi_context *ftdi, enum ftdi_interface interface)
{
- switch (interface) {
- case INTERFACE_ANY:
- case INTERFACE_A:
- /* ftdi_usb_open_desc cares to set the right index, depending on the found chip */
- break;
- case INTERFACE_B:
- ftdi->interface = 1;
- ftdi->index = INTERFACE_B;
- ftdi->in_ep = 0x04;
- ftdi->out_ep = 0x83;
- break;
- default:
- ftdi_error_return(-1, "Unknown interface");
+ switch (interface)
+ {
+ case INTERFACE_ANY:
+ case INTERFACE_A:
+ /* ftdi_usb_open_desc cares to set the right index, depending on the found chip */
+ break;
+ case INTERFACE_B:
+ ftdi->interface = 1;
+ ftdi->index = INTERFACE_B;
+ ftdi->in_ep = 0x04;
+ ftdi->out_ep = 0x83;
+ break;
+ case INTERFACE_C:
+ ftdi->interface = 2;
+ ftdi->index = INTERFACE_C;
+ ftdi->in_ep = 0x06;
+ ftdi->out_ep = 0x85;
+ break;
+ case INTERFACE_D:
+ ftdi->interface = 3;
+ ftdi->index = INTERFACE_D;
+ ftdi->in_ep = 0x08;
+ ftdi->out_ep = 0x87;
+ break;
+ default:
+ ftdi_error_return(-1, "Unknown interface");
}
return 0;
}
*/
void ftdi_deinit(struct ftdi_context *ftdi)
{
- if (ftdi->async_usb_buffer != NULL) {
+ ftdi_usb_close_internal (ftdi);
+
+ if (ftdi->async_usb_buffer != NULL)
+ {
free(ftdi->async_usb_buffer);
ftdi->async_usb_buffer = NULL;
}
- if (ftdi->readbuffer != NULL) {
+ if (ftdi->readbuffer != NULL)
+ {
free(ftdi->readbuffer);
ftdi->readbuffer = NULL;
}
curdev = devlist;
*curdev = NULL;
- for (bus = usb_get_busses(); bus; bus = bus->next) {
- for (dev = bus->devices; dev; dev = dev->next) {
+ for (bus = usb_get_busses(); bus; bus = bus->next)
+ {
+ for (dev = bus->devices; dev; dev = dev->next)
+ {
if (dev->descriptor.idVendor == vendor
&& dev->descriptor.idProduct == product)
{
{
struct ftdi_device_list *curdev, *next;
- for (curdev = *devlist; curdev != NULL;) {
+ for (curdev = *devlist; curdev != NULL;)
+ {
next = curdev->next;
free(curdev);
curdev = next;
\retval -10: unable to close device
*/
int ftdi_usb_get_strings(struct ftdi_context * ftdi, struct usb_device * dev,
- char * manufacturer, int mnf_len, char * description, int desc_len, char * serial, int serial_len)
+ char * manufacturer, int mnf_len, char * description, int desc_len, char * serial, int serial_len)
{
if ((ftdi==NULL) || (dev==NULL))
return -1;
if (!(ftdi->usb_dev = usb_open(dev)))
ftdi_error_return(-4, usb_strerror());
- if (manufacturer != NULL) {
- if (usb_get_string_simple(ftdi->usb_dev, dev->descriptor.iManufacturer, manufacturer, mnf_len) <= 0) {
- usb_close (ftdi->usb_dev);
+ if (manufacturer != NULL)
+ {
+ if (usb_get_string_simple(ftdi->usb_dev, dev->descriptor.iManufacturer, manufacturer, mnf_len) <= 0)
+ {
+ ftdi_usb_close_internal (ftdi);
ftdi_error_return(-7, usb_strerror());
}
}
- if (description != NULL) {
- if (usb_get_string_simple(ftdi->usb_dev, dev->descriptor.iProduct, description, desc_len) <= 0) {
- usb_close (ftdi->usb_dev);
+ if (description != NULL)
+ {
+ if (usb_get_string_simple(ftdi->usb_dev, dev->descriptor.iProduct, description, desc_len) <= 0)
+ {
+ ftdi_usb_close_internal (ftdi);
ftdi_error_return(-8, usb_strerror());
}
}
- if (serial != NULL) {
- if (usb_get_string_simple(ftdi->usb_dev, dev->descriptor.iSerialNumber, serial, serial_len) <= 0) {
- usb_close (ftdi->usb_dev);
+ if (serial != NULL)
+ {
+ if (usb_get_string_simple(ftdi->usb_dev, dev->descriptor.iSerialNumber, serial, serial_len) <= 0)
+ {
+ ftdi_usb_close_internal (ftdi);
ftdi_error_return(-9, usb_strerror());
}
}
- if (usb_close (ftdi->usb_dev) != 0)
+ if (ftdi_usb_close_internal (ftdi) != 0)
ftdi_error_return(-10, usb_strerror());
return 0;
// set configuration (needed especially for windows)
// tolerate EBUSY: one device with one configuration, but two interfaces
// and libftdi sessions to both interfaces (e.g. FT2232)
- if (dev->descriptor.bNumConfigurations > 0 &&
- usb_set_configuration(ftdi->usb_dev, dev->config[0].bConfigurationValue) &&
- errno != EBUSY)
+ if (dev->descriptor.bNumConfigurations > 0 &&
+ usb_set_configuration(ftdi->usb_dev, dev->config[0].bConfigurationValue) &&
+ errno != EBUSY)
{
- usb_close (ftdi->usb_dev);
- if (detach_errno == EPERM) {
+ ftdi_usb_close_internal (ftdi);
+ if (detach_errno == EPERM)
+ {
ftdi_error_return(-8, "inappropriate permissions on device!");
- } else {
+ }
+ else
+ {
ftdi_error_return(-3, "unable to set usb configuration. Make sure ftdi_sio is unloaded!");
}
}
- if (usb_claim_interface(ftdi->usb_dev, ftdi->interface) != 0) {
- usb_close (ftdi->usb_dev);
- if (detach_errno == EPERM) {
+ if (usb_claim_interface(ftdi->usb_dev, ftdi->interface) != 0)
+ {
+ ftdi_usb_close_internal (ftdi);
+ if (detach_errno == EPERM)
+ {
ftdi_error_return(-8, "inappropriate permissions on device!");
- } else {
+ }
+ else
+ {
ftdi_error_return(-5, "unable to claim usb device. Make sure ftdi_sio is unloaded!");
}
}
- if (ftdi_usb_reset (ftdi) != 0) {
- usb_close (ftdi->usb_dev);
+ if (ftdi_usb_reset (ftdi) != 0)
+ {
+ ftdi_usb_close_internal (ftdi);
ftdi_error_return(-6, "ftdi_usb_reset failed");
}
- if (ftdi_set_baudrate (ftdi, 9600) != 0) {
- usb_close (ftdi->usb_dev);
+ if (ftdi_set_baudrate (ftdi, 9600) != 0)
+ {
+ ftdi_usb_close_internal (ftdi);
ftdi_error_return(-7, "set baudrate failed");
}
ftdi->type = TYPE_BM;
else if (dev->descriptor.bcdDevice == 0x200)
ftdi->type = TYPE_AM;
- else if (dev->descriptor.bcdDevice == 0x500) {
+ else if (dev->descriptor.bcdDevice == 0x500)
ftdi->type = TYPE_2232C;
- if (!ftdi->index)
- ftdi->index = INTERFACE_A;
- } else if (dev->descriptor.bcdDevice == 0x600)
+ else if (dev->descriptor.bcdDevice == 0x600)
ftdi->type = TYPE_R;
+ else if (dev->descriptor.bcdDevice == 0x700)
+ ftdi->type = TYPE_2232H;
+ else if (dev->descriptor.bcdDevice == 0x800)
+ ftdi->type = TYPE_4232H;
+
+ // Set default interface on dual/quad type chips
+ switch(ftdi->type)
+ {
+ case TYPE_2232C:
+ case TYPE_2232H:
+ case TYPE_4232H:
+ if (!ftdi->index)
+ ftdi->index = INTERFACE_A;
+ break;
+ default:
+ break;
+ }
ftdi_error_return(0, "all fine");
}
if (usb_find_devices() < 0)
ftdi_error_return(-2, "usb_find_devices() failed");
- for (bus = usb_get_busses(); bus; bus = bus->next) {
- for (dev = bus->devices; dev; dev = dev->next) {
+ for (bus = usb_get_busses(); bus; bus = bus->next)
+ {
+ for (dev = bus->devices; dev; dev = dev->next)
+ {
if (dev->descriptor.idVendor == vendor
- && dev->descriptor.idProduct == product) {
+ && dev->descriptor.idProduct == product)
+ {
if (!(ftdi->usb_dev = usb_open(dev)))
ftdi_error_return(-4, "usb_open() failed");
- if (description != NULL) {
- if (usb_get_string_simple(ftdi->usb_dev, dev->descriptor.iProduct, string, sizeof(string)) <= 0) {
- usb_close (ftdi->usb_dev);
+ if (description != NULL)
+ {
+ if (usb_get_string_simple(ftdi->usb_dev, dev->descriptor.iProduct, string, sizeof(string)) <= 0)
+ {
+ ftdi_usb_close_internal (ftdi);
ftdi_error_return(-8, "unable to fetch product description");
}
- if (strncmp(string, description, sizeof(string)) != 0) {
- if (usb_close (ftdi->usb_dev) != 0)
+ if (strncmp(string, description, sizeof(string)) != 0)
+ {
+ if (ftdi_usb_close_internal (ftdi) != 0)
ftdi_error_return(-10, "unable to close device");
continue;
}
}
- if (serial != NULL) {
- if (usb_get_string_simple(ftdi->usb_dev, dev->descriptor.iSerialNumber, string, sizeof(string)) <= 0) {
- usb_close (ftdi->usb_dev);
+ if (serial != NULL)
+ {
+ if (usb_get_string_simple(ftdi->usb_dev, dev->descriptor.iSerialNumber, string, sizeof(string)) <= 0)
+ {
+ ftdi_usb_close_internal (ftdi);
ftdi_error_return(-9, "unable to fetch serial number");
}
- if (strncmp(string, serial, sizeof(string)) != 0) {
- if (usb_close (ftdi->usb_dev) != 0)
+ if (strncmp(string, serial, sizeof(string)) != 0)
+ {
+ if (ftdi_usb_close_internal (ftdi) != 0)
ftdi_error_return(-10, "unable to close device");
continue;
}
}
- if (usb_close (ftdi->usb_dev) != 0)
+ if (ftdi_usb_close_internal (ftdi) != 0)
ftdi_error_return(-10, "unable to close device");
return ftdi_usb_open_dev(ftdi, dev);
if (usb_control_msg(ftdi->usb_dev, FTDI_DEVICE_OUT_REQTYPE,
SIO_RESET_REQUEST, SIO_RESET_SIO,
ftdi->index, NULL, 0, ftdi->usb_write_timeout) != 0)
- ftdi_error_return(-1,"FTDI reset failed");
+ ftdi_error_return(-1,"FTDI reset failed");
// Invalidate data in the readbuffer
ftdi->readbuffer_offset = 0;
*/
int ftdi_usb_purge_rx_buffer(struct ftdi_context *ftdi)
{
- if (usb_control_msg(ftdi->usb_dev, FTDI_DEVICE_OUT_REQTYPE,
- SIO_RESET_REQUEST, SIO_RESET_PURGE_RX,
- ftdi->index, NULL, 0, ftdi->usb_write_timeout) != 0)
+ if (usb_control_msg(ftdi->usb_dev, FTDI_DEVICE_OUT_REQTYPE,
+ SIO_RESET_REQUEST, SIO_RESET_PURGE_RX,
+ ftdi->index, NULL, 0, ftdi->usb_write_timeout) != 0)
ftdi_error_return(-1, "FTDI purge of RX buffer failed");
// Invalidate data in the readbuffer
*/
int ftdi_usb_purge_tx_buffer(struct ftdi_context *ftdi)
{
- if (usb_control_msg(ftdi->usb_dev, FTDI_DEVICE_OUT_REQTYPE,
- SIO_RESET_REQUEST, SIO_RESET_PURGE_TX,
- ftdi->index, NULL, 0, ftdi->usb_write_timeout) != 0)
+ if (usb_control_msg(ftdi->usb_dev, FTDI_DEVICE_OUT_REQTYPE,
+ SIO_RESET_REQUEST, SIO_RESET_PURGE_TX,
+ ftdi->index, NULL, 0, ftdi->usb_write_timeout) != 0)
ftdi_error_return(-1, "FTDI purge of TX buffer failed");
return 0;
return 0;
}
+
+
/**
Closes the ftdi device. Call ftdi_deinit() if you're cleaning up.
ftdi_async_complete(ftdi,1);
#endif
- if (usb_release_interface(ftdi->usb_dev, ftdi->interface) != 0)
- rtn = -1;
+ if (ftdi->usb_dev != NULL)
+ if (usb_release_interface(ftdi->usb_dev, ftdi->interface) != 0)
+ rtn = -1;
- if (usb_close (ftdi->usb_dev) != 0)
+ if (ftdi_usb_close_internal (ftdi) != 0)
rtn = -2;
return rtn;
unsigned long encoded_divisor;
int i;
- if (baudrate <= 0) {
+ if (baudrate <= 0)
+ {
// Return error
return -1;
}
divisor = 24000000 / baudrate;
- if (ftdi->type == TYPE_AM) {
+ if (ftdi->type == TYPE_AM)
+ {
// Round down to supported fraction (AM only)
divisor -= am_adjust_dn[divisor & 7];
}
best_divisor = 0;
best_baud = 0;
best_baud_diff = 0;
- for (i = 0; i < 2; i++) {
+ for (i = 0; i < 2; i++)
+ {
int try_divisor = divisor + i;
int baud_estimate;
int baud_diff;
// Round up to supported divisor value
- if (try_divisor <= 8) {
+ if (try_divisor <= 8)
+ {
// Round up to minimum supported divisor
try_divisor = 8;
- } else if (ftdi->type != TYPE_AM && try_divisor < 12) {
+ }
+ else if (ftdi->type != TYPE_AM && try_divisor < 12)
+ {
// BM doesn't support divisors 9 through 11 inclusive
try_divisor = 12;
- } else if (divisor < 16) {
+ }
+ else if (divisor < 16)
+ {
// AM doesn't support divisors 9 through 15 inclusive
try_divisor = 16;
- } else {
- if (ftdi->type == TYPE_AM) {
+ }
+ else
+ {
+ if (ftdi->type == TYPE_AM)
+ {
// Round up to supported fraction (AM only)
try_divisor += am_adjust_up[try_divisor & 7];
- if (try_divisor > 0x1FFF8) {
+ if (try_divisor > 0x1FFF8)
+ {
// Round down to maximum supported divisor value (for AM)
try_divisor = 0x1FFF8;
}
- } else {
- if (try_divisor > 0x1FFFF) {
+ }
+ else
+ {
+ if (try_divisor > 0x1FFFF)
+ {
// Round down to maximum supported divisor value (for BM)
try_divisor = 0x1FFFF;
}
// Get estimated baud rate (to nearest integer)
baud_estimate = (24000000 + (try_divisor / 2)) / try_divisor;
// Get absolute difference from requested baud rate
- if (baud_estimate < baudrate) {
+ if (baud_estimate < baudrate)
+ {
baud_diff = baudrate - baud_estimate;
- } else {
+ }
+ else
+ {
baud_diff = baud_estimate - baudrate;
}
- if (i == 0 || baud_diff < best_baud_diff) {
+ if (i == 0 || baud_diff < best_baud_diff)
+ {
// Closest to requested baud rate so far
best_divisor = try_divisor;
best_baud = baud_estimate;
best_baud_diff = baud_diff;
- if (baud_diff == 0) {
+ if (baud_diff == 0)
+ {
// Spot on! No point trying
break;
}
// Encode the best divisor value
encoded_divisor = (best_divisor >> 3) | (frac_code[best_divisor & 7] << 14);
// Deal with special cases for encoded value
- if (encoded_divisor == 1) {
+ if (encoded_divisor == 1)
+ {
encoded_divisor = 0; // 3000000 baud
- } else if (encoded_divisor == 0x4001) {
+ }
+ else if (encoded_divisor == 0x4001)
+ {
encoded_divisor = 1; // 2000000 baud (BM only)
}
// Split into "value" and "index" values
*value = (unsigned short)(encoded_divisor & 0xFFFF);
- if(ftdi->type == TYPE_2232C) {
+ if (ftdi->type == TYPE_2232C)
+ {
*index = (unsigned short)(encoded_divisor >> 8);
*index &= 0xFF00;
*index |= ftdi->index;
unsigned short value, index;
int actual_baudrate;
- if (ftdi->bitbang_enabled) {
+ if (ftdi->bitbang_enabled)
+ {
baudrate = baudrate*4;
}
\retval -1: Setting line property failed
*/
int ftdi_set_line_property2(struct ftdi_context *ftdi, enum ftdi_bits_type bits,
- enum ftdi_stopbits_type sbit, enum ftdi_parity_type parity,
- enum ftdi_break_type break_type)
+ enum ftdi_stopbits_type sbit, enum ftdi_parity_type parity,
+ enum ftdi_break_type break_type)
{
unsigned short value = bits;
- switch(parity) {
- case NONE:
- value |= (0x00 << 8);
- break;
- case ODD:
- value |= (0x01 << 8);
- break;
- case EVEN:
- value |= (0x02 << 8);
- break;
- case MARK:
- value |= (0x03 << 8);
- break;
- case SPACE:
- value |= (0x04 << 8);
- break;
+ switch (parity)
+ {
+ case NONE:
+ value |= (0x00 << 8);
+ break;
+ case ODD:
+ value |= (0x01 << 8);
+ break;
+ case EVEN:
+ value |= (0x02 << 8);
+ break;
+ case MARK:
+ value |= (0x03 << 8);
+ break;
+ case SPACE:
+ value |= (0x04 << 8);
+ break;
}
- switch(sbit) {
- case STOP_BIT_1:
- value |= (0x00 << 11);
- break;
- case STOP_BIT_15:
- value |= (0x01 << 11);
- break;
- case STOP_BIT_2:
- value |= (0x02 << 11);
- break;
+ switch (sbit)
+ {
+ case STOP_BIT_1:
+ value |= (0x00 << 11);
+ break;
+ case STOP_BIT_15:
+ value |= (0x01 << 11);
+ break;
+ case STOP_BIT_2:
+ value |= (0x02 << 11);
+ break;
}
- switch(break_type) {
- case BREAK_OFF:
- value |= (0x00 << 14);
- break;
- case BREAK_ON:
- value |= (0x01 << 14);
- break;
+ switch (break_type)
+ {
+ case BREAK_OFF:
+ value |= (0x00 << 14);
+ break;
+ case BREAK_ON:
+ value |= (0x01 << 14);
+ break;
}
if (usb_control_msg(ftdi->usb_dev, FTDI_DEVICE_OUT_REQTYPE,
int offset = 0;
int total_written = 0;
- while (offset < size) {
+ while (offset < size)
+ {
int write_size = ftdi->writebuffer_chunksize;
if (offset+write_size > size)
#ifdef LIBFTDI_LINUX_ASYNC_MODE
/* this is strongly dependent on libusb using the same struct layout. If libusb
changes in some later version this may break horribly (this is for libusb 0.1.12) */
-struct usb_dev_handle {
- int fd;
- // some other stuff coming here we don't need
+struct usb_dev_handle
+{
+ int fd;
+ // some other stuff coming here we don't need
};
/**
{
struct usbdevfs_urb *urb;
int pending=0;
- int i;
+ unsigned int i;
- for (i=0; i < ftdi->async_usb_buffer_size; i++) {
+ for (i=0; i < ftdi->async_usb_buffer_size; i++)
+ {
urb=&((struct usbdevfs_urb *)(ftdi->async_usb_buffer))[i];
if (urb->usercontext != FTDI_URB_USERCONTEXT_COOKIE)
pending++;
*/
static void _usb_async_cleanup(struct ftdi_context *ftdi, int wait_for_more, int timeout_msec)
{
- struct timeval tv;
- struct usbdevfs_urb *urb=NULL;
- int ret;
- fd_set writefds;
- int keep_going=0;
-
- FD_ZERO(&writefds);
- FD_SET(ftdi->usb_dev->fd, &writefds);
-
- /* init timeout only once, select writes time left after call */
- tv.tv_sec = timeout_msec / 1000;
- tv.tv_usec = (timeout_msec % 1000) * 1000;
-
- do {
- while (_usb_get_async_urbs_pending(ftdi)
- && (ret = ioctl(ftdi->usb_dev->fd, USBDEVFS_REAPURBNDELAY, &urb)) == -1
- && errno == EAGAIN)
+ struct timeval tv;
+ struct usbdevfs_urb *urb=NULL;
+ int ret;
+ fd_set writefds;
+ int keep_going=0;
+
+ FD_ZERO(&writefds);
+ FD_SET(ftdi->usb_dev->fd, &writefds);
+
+ /* init timeout only once, select writes time left after call */
+ tv.tv_sec = timeout_msec / 1000;
+ tv.tv_usec = (timeout_msec % 1000) * 1000;
+
+ do
{
- if (keep_going && !wait_for_more) {
- /* don't wait if repeating only for keep_going */
- keep_going=0;
- break;
- }
-
- /* wait for timeout msec or something written ready */
- select(ftdi->usb_dev->fd+1, NULL, &writefds, NULL, &tv);
- }
+ while (_usb_get_async_urbs_pending(ftdi)
+ && (ret = ioctl(ftdi->usb_dev->fd, USBDEVFS_REAPURBNDELAY, &urb)) == -1
+ && errno == EAGAIN)
+ {
+ if (keep_going && !wait_for_more)
+ {
+ /* don't wait if repeating only for keep_going */
+ keep_going=0;
+ break;
+ }
- if (ret == 0 && urb != NULL) {
- /* got a free urb, mark it */
- urb->usercontext = FTDI_URB_USERCONTEXT_COOKIE;
+ /* wait for timeout msec or something written ready */
+ select(ftdi->usb_dev->fd+1, NULL, &writefds, NULL, &tv);
+ }
+
+ if (ret == 0 && urb != NULL)
+ {
+ /* got a free urb, mark it */
+ urb->usercontext = FTDI_URB_USERCONTEXT_COOKIE;
- /* try to get more urbs that are ready now, but don't wait anymore */
- urb=NULL;
- keep_going=1;
- } else {
- /* no more urbs waiting */
- keep_going=0;
+ /* try to get more urbs that are ready now, but don't wait anymore */
+ urb=NULL;
+ keep_going=1;
+ }
+ else
+ {
+ /* no more urbs waiting */
+ keep_going=0;
+ }
}
- } while (keep_going);
+ while (keep_going);
}
/**
*/
void ftdi_async_complete(struct ftdi_context *ftdi, int wait_for_more)
{
- _usb_async_cleanup(ftdi,wait_for_more,ftdi->usb_write_timeout);
+ _usb_async_cleanup(ftdi,wait_for_more,ftdi->usb_write_timeout);
}
/**
*/
static int _usb_bulk_write_async(struct ftdi_context *ftdi, int ep, char *bytes, int size)
{
- struct usbdevfs_urb *urb;
- int bytesdone = 0, requested;
- int ret, i;
- int cleanup_count;
-
- do {
- /* find a free urb buffer we can use */
- urb=NULL;
- for (cleanup_count=0; urb==NULL && cleanup_count <= 1; cleanup_count++)
+ struct usbdevfs_urb *urb;
+ int bytesdone = 0, requested;
+ int ret, cleanup_count;
+ unsigned int i;
+
+ do
{
- if (i==ftdi->async_usb_buffer_size) {
- /* wait until some buffers are free */
- _usb_async_cleanup(ftdi,0,ftdi->usb_write_timeout);
- }
+ /* find a free urb buffer we can use */
+ urb=NULL;
+ for (cleanup_count=0; urb==NULL && cleanup_count <= 1; cleanup_count++)
+ {
+ if (i==ftdi->async_usb_buffer_size)
+ {
+ /* wait until some buffers are free */
+ _usb_async_cleanup(ftdi,0,ftdi->usb_write_timeout);
+ }
- for (i=0; i < ftdi->async_usb_buffer_size; i++) {
- urb=&((struct usbdevfs_urb *)(ftdi->async_usb_buffer))[i];
- if (urb->usercontext == FTDI_URB_USERCONTEXT_COOKIE)
- break; /* found a free urb position */
- urb=NULL;
+ for (i=0; i < ftdi->async_usb_buffer_size; i++)
+ {
+ urb=&((struct usbdevfs_urb *)(ftdi->async_usb_buffer))[i];
+ if (urb->usercontext == FTDI_URB_USERCONTEXT_COOKIE)
+ break; /* found a free urb position */
+ urb=NULL;
+ }
}
- }
- /* no free urb position found */
- if (urb==NULL)
- return -1;
+ /* no free urb position found */
+ if (urb==NULL)
+ return -1;
+
+ requested = size - bytesdone;
+ if (requested > 4096)
+ requested = 4096;
+
+ memset(urb,0,sizeof(urb));
- requested = size - bytesdone;
- if (requested > 4096)
- requested = 4096;
-
- memset(urb,0,sizeof(urb));
-
- urb->type = USBDEVFS_URB_TYPE_BULK;
- urb->endpoint = ep;
- urb->flags = 0;
- urb->buffer = bytes + bytesdone;
- urb->buffer_length = requested;
- urb->signr = 0;
- urb->actual_length = 0;
- urb->number_of_packets = 0;
- urb->usercontext = 0;
-
- do {
- ret = ioctl(ftdi->usb_dev->fd, USBDEVFS_SUBMITURB, urb);
- } while (ret < 0 && errno == EINTR);
- if (ret < 0)
- return ret; /* the caller can read errno to get more info */
-
- bytesdone += requested;
- } while (bytesdone < size);
- return bytesdone;
+ urb->type = USBDEVFS_URB_TYPE_BULK;
+ urb->endpoint = ep;
+ urb->flags = 0;
+ urb->buffer = bytes + bytesdone;
+ urb->buffer_length = requested;
+ urb->signr = 0;
+ urb->actual_length = 0;
+ urb->number_of_packets = 0;
+ urb->usercontext = 0;
+
+ do
+ {
+ ret = ioctl(ftdi->usb_dev->fd, USBDEVFS_SUBMITURB, urb);
+ }
+ while (ret < 0 && errno == EINTR);
+ if (ret < 0)
+ return ret; /* the caller can read errno to get more info */
+
+ bytesdone += requested;
+ }
+ while (bytesdone < size);
+ return bytesdone;
}
/**
int offset = 0;
int total_written = 0;
- while (offset < size) {
+ while (offset < size)
+ {
int write_size = ftdi->writebuffer_chunksize;
if (offset+write_size > size)
int ftdi_read_data(struct ftdi_context *ftdi, unsigned char *buf, int size)
{
int offset = 0, ret = 1, i, num_of_chunks, chunk_remains;
+ int packet_size;
+
+ // New hi-speed devices from FTDI use a packet size of 512 bytes
+ if (ftdi->type == TYPE_2232H || ftdi->type == TYPE_4232H)
+ packet_size = 512;
+ else
+ packet_size = 64;
// everything we want is still in the readbuffer?
- if (size <= ftdi->readbuffer_remaining) {
+ if (size <= ftdi->readbuffer_remaining)
+ {
memcpy (buf, ftdi->readbuffer+ftdi->readbuffer_offset, size);
// Fix offsets
return size;
}
// something still in the readbuffer, but not enough to satisfy 'size'?
- if (ftdi->readbuffer_remaining != 0) {
+ if (ftdi->readbuffer_remaining != 0)
+ {
memcpy (buf, ftdi->readbuffer+ftdi->readbuffer_offset, ftdi->readbuffer_remaining);
// Fix offset
offset += ftdi->readbuffer_remaining;
}
// do the actual USB read
- while (offset < size && ret > 0) {
+ while (offset < size && ret > 0)
+ {
ftdi->readbuffer_remaining = 0;
ftdi->readbuffer_offset = 0;
/* returns how much received */
if (ret < 0)
ftdi_error_return(ret, "usb bulk read failed");
- if (ret > 2) {
+ if (ret > 2)
+ {
// skip FTDI status bytes.
// Maybe stored in the future to enable modem use
- num_of_chunks = ret / 64;
- chunk_remains = ret % 64;
+ num_of_chunks = ret / packet_size;
+ chunk_remains = ret % packet_size;
//printf("ret = %X, num_of_chunks = %X, chunk_remains = %X, readbuffer_offset = %X\n", ret, num_of_chunks, chunk_remains, ftdi->readbuffer_offset);
ftdi->readbuffer_offset += 2;
ret -= 2;
- if (ret > 62) {
+ if (ret > packet_size - 2)
+ {
for (i = 1; i < num_of_chunks; i++)
- memmove (ftdi->readbuffer+ftdi->readbuffer_offset+62*i,
- ftdi->readbuffer+ftdi->readbuffer_offset+64*i,
- 62);
- if (chunk_remains > 2) {
- memmove (ftdi->readbuffer+ftdi->readbuffer_offset+62*i,
- ftdi->readbuffer+ftdi->readbuffer_offset+64*i,
+ memmove (ftdi->readbuffer+ftdi->readbuffer_offset+(packet_size - 2)*i,
+ ftdi->readbuffer+ftdi->readbuffer_offset+packet_size*i,
+ packet_size - 2);
+ if (chunk_remains > 2)
+ {
+ memmove (ftdi->readbuffer+ftdi->readbuffer_offset+(packet_size - 2)*i,
+ ftdi->readbuffer+ftdi->readbuffer_offset+packet_size*i,
chunk_remains-2);
ret -= 2*num_of_chunks;
- } else
+ }
+ else
ret -= 2*(num_of_chunks-1)+chunk_remains;
}
- } else if (ret <= 2) {
+ }
+ else if (ret <= 2)
+ {
// no more data to read?
return offset;
}
- if (ret > 0) {
+ if (ret > 0)
+ {
// data still fits in buf?
- if (offset+ret <= size) {
+ if (offset+ret <= size)
+ {
memcpy (buf+offset, ftdi->readbuffer+ftdi->readbuffer_offset, ret);
//printf("buf[0] = %X, buf[1] = %X\n", buf[0], buf[1]);
offset += ret;
//printf("read_data exact rem %d offset %d\n",
//ftdi->readbuffer_remaining, offset);
return offset;
- } else {
+ }
+ else
+ {
// only copy part of the data or size <= readbuffer_chunksize
int part_size = size-offset;
memcpy (buf+offset, ftdi->readbuffer+ftdi->readbuffer_offset, part_size);
/* FT2232C: Set bitbang_mode to 2 to enable SPI */
usb_val |= (ftdi->bitbang_mode << 8);
- if (usb_control_msg(ftdi->usb_dev, FTDI_DEVICE_OUT_REQTYPE,
- SIO_SET_BITMODE_REQUEST, usb_val, ftdi->index,
+ if (usb_control_msg(ftdi->usb_dev, FTDI_DEVICE_OUT_REQTYPE,
+ SIO_SET_BITMODE_REQUEST, usb_val, ftdi->index,
NULL, 0, ftdi->usb_write_timeout) != 0)
ftdi_error_return(-1, "unable to enter bitbang mode. Perhaps not a BM type chip?");
Set flowcontrol for ftdi chip
\param ftdi pointer to ftdi_context
- \param flowctrl flow control to use. should be
- SIO_DISABLE_FLOW_CTRL, SIO_RTS_CTS_HS, SIO_DTR_DSR_HS or SIO_XON_XOFF_HS
+ \param flowctrl flow control to use. should be
+ SIO_DISABLE_FLOW_CTRL, SIO_RTS_CTS_HS, SIO_DTR_DSR_HS or SIO_XON_XOFF_HS
\retval 0: all fine
\retval -1: set flow control failed
unsigned short usb_val;
if (dtr)
- usb_val = SIO_SET_DTR_HIGH;
+ usb_val = SIO_SET_DTR_HIGH;
else
- usb_val = SIO_SET_DTR_LOW;
+ usb_val = SIO_SET_DTR_LOW;
if (rts)
- usb_val |= SIO_SET_RTS_HIGH;
+ usb_val |= SIO_SET_RTS_HIGH;
else
- usb_val |= SIO_SET_RTS_LOW;
+ usb_val |= SIO_SET_RTS_LOW;
if (usb_control_msg(ftdi->usb_dev, FTDI_DEVICE_OUT_REQTYPE,
SIO_SET_MODEM_CTRL_REQUEST, usb_val, ftdi->index,
NULL, 0, ftdi->usb_write_timeout) != 0)
- ftdi_error_return(-1, "set of rts/dtr failed");
+ ftdi_error_return(-1, "set of rts/dtr failed");
return 0;
}
\retval -1: unable to set event character
*/
int ftdi_set_event_char(struct ftdi_context *ftdi,
- unsigned char eventch, unsigned char enable)
+ unsigned char eventch, unsigned char enable)
{
unsigned short usb_val;
\retval -1: unable to set error character
*/
int ftdi_set_error_char(struct ftdi_context *ftdi,
- unsigned char errorch, unsigned char enable)
+ unsigned char errorch, unsigned char enable)
{
unsigned short usb_val;
*/
void ftdi_eeprom_setsize(struct ftdi_context *ftdi, struct ftdi_eeprom *eeprom, int size)
{
- ftdi->eeprom_size=size;
- eeprom->size=size;
+ ftdi->eeprom_size=size;
+ eeprom->size=size;
}
/**
size_check = eeprom->size;
size_check -= 28; // 28 are always in use (fixed)
- // Top half of a 256byte eeprom is used just for strings and checksum
+ // Top half of a 256byte eeprom is used just for strings and checksum
// it seems that the FTDI chip will not read these strings from the lower half
// Each string starts with two bytes; offset and type (0x03 for string)
// the checksum needs two bytes, so without the string data that 8 bytes from the top half
- if(eeprom->size>=256)size_check = 120;
+ if (eeprom->size>=256)size_check = 120;
size_check -= manufacturer_size*2;
size_check -= product_size*2;
size_check -= serial_size*2;
// Addr 0C: USB version low byte when 0x0A bit 4 is set
// Addr 0D: USB version high byte when 0x0A bit 4 is set
- if (eeprom->change_usb_version == 1) {
+ if (eeprom->change_usb_version == 1)
+ {
output[0x0C] = eeprom->usb_version;
output[0x0D] = eeprom->usb_version >> 8;
}
// Dynamic content
i=0x14;
- if(eeprom->size>=256) i = 0x80;
+ if (eeprom->size>=256) i = 0x80;
- // Output manufacturer
+ // Output manufacturer
output[0x0E] = i | 0x80; // calculate offset
output[i++] = manufacturer_size*2 + 2;
output[i++] = 0x03; // type: string
- for (j = 0; j < manufacturer_size; j++) {
+ for (j = 0; j < manufacturer_size; j++)
+ {
output[i] = eeprom->manufacturer[j], i++;
output[i] = 0x00, i++;
}
output[0x10] = i | 0x80; // calculate offset
output[i] = product_size*2 + 2, i++;
output[i] = 0x03, i++;
- for (j = 0; j < product_size; j++) {
+ for (j = 0; j < product_size; j++)
+ {
output[i] = eeprom->product[j], i++;
output[i] = 0x00, i++;
}
output[0x12] = i | 0x80; // calculate offset
output[i] = serial_size*2 + 2, i++;
output[i] = 0x03, i++;
- for (j = 0; j < serial_size; j++) {
+ for (j = 0; j < serial_size; j++)
+ {
output[i] = eeprom->serial[j], i++;
output[i] = 0x00, i++;
}
// calculate checksum
checksum = 0xAAAA;
- for (i = 0; i < eeprom->size/2-1; i++) {
+ for (i = 0; i < eeprom->size/2-1; i++)
+ {
value = output[i*2];
value += output[(i*2)+1] << 8;
Decode binary EEPROM image into an ftdi_eeprom structure.
\param eeprom Pointer to ftdi_eeprom which will be filled in.
- \param output Buffer of \a size bytes of raw eeprom data
+ \param buf Buffer of \a size bytes of raw eeprom data
\param size size size of eeprom data in bytes
\retval 0: all fine
FIXME: How to pass size? How to handle size field in ftdi_eeprom?
FIXME: Strings are malloc'ed here and should be freed somewhere
*/
-void ftdi_eeprom_decode(struct ftdi_eeprom *eeprom, unsigned char *buf, int size)
+int ftdi_eeprom_decode(struct ftdi_eeprom *eeprom, unsigned char *buf, int size)
{
unsigned char i, j;
unsigned short checksum, eeprom_checksum, value;
size_check = eeprom->size;
size_check -= 28; // 28 are always in use (fixed)
- // Top half of a 256byte eeprom is used just for strings and checksum
+ // Top half of a 256byte eeprom is used just for strings and checksum
// it seems that the FTDI chip will not read these strings from the lower half
// Each string starts with two bytes; offset and type (0x03 for string)
// the checksum needs two bytes, so without the string data that 8 bytes from the top half
- if(eeprom->size>=256)size_check = 120;
+ if (eeprom->size>=256)size_check = 120;
size_check -= manufacturer_size*2;
size_check -= product_size*2;
size_check -= serial_size*2;
// Addr 04: Product ID
eeprom->product_id = buf[0x04] + (buf[0x05] << 8);
-
- switch (buf[0x06] + (buf[0x07]<<8)) {
- case 0x0400:
- eeprom->BM_type_chip = 1;
- break;
- case 0x0200:
- eeprom->BM_type_chip = 0;
- break;
- default: // Unknown device
- eeprom->BM_type_chip = 0;
- break;
+
+ value = buf[0x06] + (buf[0x07]<<8);
+ switch (value)
+ {
+ case 0x0400:
+ eeprom->BM_type_chip = 1;
+ break;
+ case 0x0200:
+ eeprom->BM_type_chip = 0;
+ break;
+ default: // Unknown device
+ eeprom->BM_type_chip = 0;
+ break;
}
// Addr 08: Config descriptor
// Addr 0C: USB version low byte when 0x0A bit 4 is set
// Addr 0D: USB version high byte when 0x0A bit 4 is set
- if (eeprom->change_usb_version == 1) {
- eeprom->usb_version = buf[0x0C] + (buf[0x0D] << 8);
+ if (eeprom->change_usb_version == 1)
+ {
+ eeprom->usb_version = buf[0x0C] + (buf[0x0D] << 8);
}
// Addr 0E: Offset of the manufacturer string + 0x80, calculated later
if (serial_size > 0) eeprom->serial = malloc(serial_size);
else eeprom->serial = NULL;
- // Decode manufacturer
+ // Decode manufacturer
i = buf[0x0E] & 0x7f; // offset
- for (j=0;j<manufacturer_size-1;j++) {
- eeprom->manufacturer[j] = buf[2*j+i+2];
+ for (j=0;j<manufacturer_size-1;j++)
+ {
+ eeprom->manufacturer[j] = buf[2*j+i+2];
}
eeprom->manufacturer[j] = '\0';
// Decode product name
i = buf[0x10] & 0x7f; // offset
- for (j=0;j<product_size-1;j++) {
- eeprom->product[j] = buf[2*j+i+2];
+ for (j=0;j<product_size-1;j++)
+ {
+ eeprom->product[j] = buf[2*j+i+2];
}
eeprom->product[j] = '\0';
// Decode serial
i = buf[0x12] & 0x7f; // offset
- for (j=0;j<serial_size-1;j++) {
- eeprom->serial[j] = buf[2*j+i+2];
+ for (j=0;j<serial_size-1;j++)
+ {
+ eeprom->serial[j] = buf[2*j+i+2];
}
eeprom->serial[j] = '\0';
// verify checksum
checksum = 0xAAAA;
- for (i = 0; i < eeprom_size/2-1; i++) {
+ for (i = 0; i < eeprom_size/2-1; i++)
+ {
value = buf[i*2];
value += buf[(i*2)+1] << 8;
eeprom_checksum = buf[eeprom_size-2] + (buf[eeprom_size-1] << 8);
- if (eeprom_checksum != checksum) {
- fprintf(stderr, "Checksum Error: %04x %04x\n", checksum, eeprom_checksum);
- return -1;
+ if (eeprom_checksum != checksum)
+ {
+ fprintf(stderr, "Checksum Error: %04x %04x\n", checksum, eeprom_checksum);
+ return -1;
}
return 0;
{
int i;
- for (i = 0; i < ftdi->eeprom_size/2; i++) {
+ for (i = 0; i < ftdi->eeprom_size/2; i++)
+ {
if (usb_control_msg(ftdi->usb_dev, FTDI_DEVICE_IN_REQTYPE, SIO_READ_EEPROM_REQUEST, 0, i, eeprom+(i*2), 2, ftdi->usb_read_timeout) != 2)
ftdi_error_return(-1, "reading eeprom failed");
}
static unsigned char ftdi_read_chipid_shift(unsigned char value)
{
return ((value & 1) << 1) |
- ((value & 2) << 5) |
- ((value & 4) >> 2) |
- ((value & 8) << 4) |
- ((value & 16) >> 1) |
- ((value & 32) >> 1) |
- ((value & 64) >> 4) |
- ((value & 128) >> 2);
+ ((value & 2) << 5) |
+ ((value & 4) >> 2) |
+ ((value & 8) << 4) |
+ ((value & 16) >> 1) |
+ ((value & 32) >> 1) |
+ ((value & 64) >> 4) |
+ ((value & 128) >> 2);
}
/**
if (usb_control_msg(ftdi->usb_dev, FTDI_DEVICE_IN_REQTYPE, SIO_READ_EEPROM_REQUEST, 0, 0x44, (char *)&b, 2, ftdi->usb_read_timeout) == 2)
{
b = b << 8 | b >> 8;
- a = (a << 16) | b;
+ a = (a << 16) | (b & 0xFFFF);
a = ftdi_read_chipid_shift(a) | ftdi_read_chipid_shift(a>>8)<<8
| ftdi_read_chipid_shift(a>>16)<<16 | ftdi_read_chipid_shift(a>>24)<<24;
*chipid = a ^ 0xa5f0f7d1;
int i=0,j,minsize=32;
int size=minsize;
- do{
- for (j = 0; i < maxsize/2 && j<size; j++) {
- if (usb_control_msg(ftdi->usb_dev, FTDI_DEVICE_IN_REQTYPE,
- SIO_READ_EEPROM_REQUEST, 0, i,
- eeprom+(i*2), 2, ftdi->usb_read_timeout) != 2)
- ftdi_error_return(-1, "reading eeprom failed");
- i++;
- }
- size*=2;
- }while(size<=maxsize && memcmp(eeprom,&eeprom[size/2],size/2)!=0);
+ do
+ {
+ for (j = 0; i < maxsize/2 && j<size; j++)
+ {
+ if (usb_control_msg(ftdi->usb_dev, FTDI_DEVICE_IN_REQTYPE,
+ SIO_READ_EEPROM_REQUEST, 0, i,
+ eeprom+(i*2), 2, ftdi->usb_read_timeout) != 2)
+ ftdi_error_return(-1, "reading eeprom failed");
+ i++;
+ }
+ size*=2;
+ }
+ while (size<=maxsize && memcmp(eeprom,&eeprom[size/2],size/2)!=0);
return size/2;
}
int ftdi_write_eeprom(struct ftdi_context *ftdi, unsigned char *eeprom)
{
unsigned short usb_val, status;
- int i;
+ int i, ret;
/* These commands were traced while running MProg */
- ftdi_usb_reset(ftdi);
- ftdi_poll_modem_status(ftdi, &status);
- ftdi_set_latency_timer(ftdi, 0x77);
-
- for (i = 0; i < ftdi->eeprom_size/2; i++) {
+ if ((ret = ftdi_usb_reset(ftdi)) != 0)
+ return ret;
+ if ((ret = ftdi_poll_modem_status(ftdi, &status)) != 0)
+ return ret;
+ if ((ret = ftdi_set_latency_timer(ftdi, 0x77)) != 0)
+ return ret;
+
+ for (i = 0; i < ftdi->eeprom_size/2; i++)
+ {
usb_val = eeprom[i*2];
usb_val += eeprom[(i*2)+1] << 8;
if (usb_control_msg(ftdi->usb_dev, FTDI_DEVICE_OUT_REQTYPE,
- SIO_WRITE_EEPROM_REQUEST, usb_val, i,
+ SIO_WRITE_EEPROM_REQUEST, usb_val, i,
NULL, 0, ftdi->usb_write_timeout) != 0)
ftdi_error_return(-1, "unable to write eeprom");
}