ftdi.c - description
-------------------
begin : Fri Apr 4 2003
- copyright : (C) 2003-2008 by Intra2net AG
+ copyright : (C) 2003-2010 by Intra2net AG
email : opensource@intra2net.com
***************************************************************************/
return code; \
} while(0);
+#define ftdi_error_return_free_device_list(code, str, devs) do { \
+ libusb_free_device_list(devs,1); \
+ ftdi->error_str = str; \
+ return code; \
+ } while(0);
+
/**
Internal function to close usb device pointer.
*/
static void ftdi_usb_close_internal (struct ftdi_context *ftdi)
{
- if (ftdi->usb_dev)
+ if (ftdi && ftdi->usb_dev)
{
libusb_close (ftdi->usb_dev);
ftdi->usb_dev = NULL;
\retval 0: all fine
\retval -1: couldn't allocate read buffer
+ \retval -2: couldn't allocate struct buffer
\remark This should be called before all functions
*/
int ftdi_init(struct ftdi_context *ftdi)
{
+ struct ftdi_eeprom* eeprom = (struct ftdi_eeprom *)malloc(sizeof(struct ftdi_eeprom));
+ ftdi->usb_ctx = NULL;
ftdi->usb_dev = NULL;
ftdi->usb_read_timeout = 5000;
ftdi->usb_write_timeout = 5000;
ftdi->error_str = NULL;
- ftdi->eeprom_size = FTDI_DEFAULT_EEPROM_SIZE;
+ if (eeprom == 0)
+ ftdi_error_return(-2, "Can't malloc struct ftdi_eeprom");
+ memset(eeprom, 0, sizeof(struct ftdi_eeprom));
+ ftdi->eeprom = eeprom;
/* All fine. Now allocate the readbuffer */
return ftdi_read_data_set_chunksize(ftdi, 4096);
\retval 0: all fine
\retval -1: unknown interface
+ \retval -2: USB device unavailable
*/
int ftdi_set_interface(struct ftdi_context *ftdi, enum ftdi_interface interface)
{
+ if (ftdi == NULL)
+ ftdi_error_return(-2, "USB device unavailable");
+
switch (interface)
{
case INTERFACE_ANY:
*/
void ftdi_deinit(struct ftdi_context *ftdi)
{
+ if (ftdi == NULL)
+ return;
+
ftdi_usb_close_internal (ftdi);
if (ftdi->readbuffer != NULL)
free(ftdi->readbuffer);
ftdi->readbuffer = NULL;
}
+
+ if (ftdi->eeprom != NULL)
+ {
+ if (ftdi->eeprom->manufacturer != 0)
+ {
+ free(ftdi->eeprom->manufacturer);
+ ftdi->eeprom->manufacturer = 0;
+ }
+ if (ftdi->eeprom->product != 0)
+ {
+ free(ftdi->eeprom->product);
+ ftdi->eeprom->product = 0;
+ }
+ if (ftdi->eeprom->serial != 0)
+ {
+ free(ftdi->eeprom->serial);
+ ftdi->eeprom->serial = 0;
+ }
+ free(ftdi->eeprom);
+ ftdi->eeprom = NULL;
+ }
+ libusb_exit(ftdi->usb_ctx);
}
/**
*/
void ftdi_set_usbdev (struct ftdi_context *ftdi, libusb_device_handle *usb)
{
+ if (ftdi == NULL)
+ return;
+
ftdi->usb_dev = usb;
}
int count = 0;
int i = 0;
- if (libusb_init(NULL) < 0)
+ if (libusb_init(&ftdi->usb_ctx) < 0)
ftdi_error_return(-4, "libusb_init() failed");
- if (libusb_get_device_list(NULL, &devs) < 0)
+ if (libusb_get_device_list(ftdi->usb_ctx, &devs) < 0)
ftdi_error_return(-5, "libusb_get_device_list() failed");
curdev = devlist;
struct libusb_config_descriptor *config0;
unsigned int packet_size;
+ // Sanity check
+ if (ftdi == NULL || dev == NULL)
+ return 64;
+
// Determine maximum packet size. Init with default value.
// New hi-speed devices from FTDI use a packet size of 512 bytes
// but could be connected to a normal speed USB hub -> 64 bytes packet size.
\retval -5: unable to claim device
\retval -6: reset failed
\retval -7: set baudrate failed
+ \retval -8: ftdi context invalid
\retval -9: libusb_get_device_descriptor() failed
\retval -10: libusb_get_config_descriptor() failed
\retval -11: libusb_etach_kernel_driver() failed
{
struct libusb_device_descriptor desc;
struct libusb_config_descriptor *config0;
- int cfg, cfg0;
+ int cfg, cfg0, detach_errno = 0;
+
+ if (ftdi == NULL)
+ ftdi_error_return(-8, "ftdi context invalid");
if (libusb_open(dev, &ftdi->usb_dev) < 0)
ftdi_error_return(-4, "libusb_open() failed");
cfg0 = config0->bConfigurationValue;
libusb_free_config_descriptor (config0);
-#ifdef LIBUSB_HAS_GET_DRIVER_NP
// Try to detach ftdi_sio kernel module.
- // Returns ENODATA if driver is not loaded.
//
// The return code is kept in a separate variable and only parsed
// if usb_set_configuration() or usb_claim_interface() fails as the
// detach operation might be denied and everything still works fine.
// Likely scenario is a static ftdi_sio kernel module.
- ret = libusb_detach_kernel_driver(ftdi->usb_dev, ftdi->interface);
- if (ret < 0 && ret != LIBUSB_ERROR_NOT_FOUND)
- ftdi_error_return(-11, "libusb_detach_kernel_driver () failed");
-#endif
+ if (libusb_detach_kernel_driver(ftdi->usb_dev, ftdi->interface) !=0)
+ detach_errno = errno;
if (libusb_get_configuration (ftdi->usb_dev, &cfg) < 0)
ftdi_error_return(-12, "libusb_get_configuration () failed");
-
// set configuration (needed especially for windows)
// tolerate EBUSY: one device with one configuration, but two interfaces
// and libftdi sessions to both interfaces (e.g. FT2232)
if (libusb_set_configuration(ftdi->usb_dev, cfg0) < 0)
{
ftdi_usb_close_internal (ftdi);
- ftdi_error_return(-3, "unable to set usb configuration. Make sure ftdi_sio is unloaded!");
+ if(detach_errno == EPERM)
+ {
+ ftdi_error_return(-8, "inappropriate permissions on device!");
+ }
+ else
+ {
+ ftdi_error_return(-3, "unable to set usb configuration. Make sure the default FTDI driver is not in use");
+ }
}
}
if (libusb_claim_interface(ftdi->usb_dev, ftdi->interface) < 0)
{
ftdi_usb_close_internal (ftdi);
- ftdi_error_return(-5, "unable to claim usb device. Make sure ftdi_sio is unloaded!");
+ if(detach_errno == EPERM)
+ {
+ ftdi_error_return(-8, "inappropriate permissions on device!");
+ }
+ else
+ {
+ ftdi_error_return(-5, "unable to claim usb device. Make sure the default FTDI driver is not in use");
+ }
}
if (ftdi_usb_reset (ftdi) != 0)
\retval -8: get product description failed
\retval -9: get serial number failed
\retval -10: unable to close device
+ \retval -11: ftdi context invalid
*/
int ftdi_usb_open_desc_index(struct ftdi_context *ftdi, int vendor, int product,
const char* description, const char* serial, unsigned int index)
char string[256];
int i = 0;
- if (libusb_init(NULL) < 0)
+ if (libusb_init(&ftdi->usb_ctx) < 0)
ftdi_error_return(-11, "libusb_init() failed");
- if (libusb_get_device_list(NULL, &devs) < 0)
+ if (ftdi == NULL)
+ ftdi_error_return(-11, "ftdi context invalid");
+
+ if (libusb_get_device_list(ftdi->usb_ctx, &devs) < 0)
ftdi_error_return(-12, "libusb_get_device_list() failed");
while ((dev = devs[i++]) != NULL)
{
struct libusb_device_descriptor desc;
+ int res;
if (libusb_get_device_descriptor(dev, &desc) < 0)
- ftdi_error_return(-13, "libusb_get_device_descriptor() failed");
+ ftdi_error_return_free_device_list(-13, "libusb_get_device_descriptor() failed", devs);
if (desc.idVendor == vendor && desc.idProduct == product)
{
if (libusb_open(dev, &ftdi->usb_dev) < 0)
- ftdi_error_return(-4, "usb_open() failed");
+ ftdi_error_return_free_device_list(-4, "usb_open() failed", devs);
if (description != NULL)
{
if (libusb_get_string_descriptor_ascii(ftdi->usb_dev, desc.iProduct, (unsigned char *)string, sizeof(string)) < 0)
{
libusb_close (ftdi->usb_dev);
- ftdi_error_return(-8, "unable to fetch product description");
+ ftdi_error_return_free_device_list(-8, "unable to fetch product description", devs);
}
if (strncmp(string, description, sizeof(string)) != 0)
{
if (libusb_get_string_descriptor_ascii(ftdi->usb_dev, desc.iSerialNumber, (unsigned char *)string, sizeof(string)) < 0)
{
ftdi_usb_close_internal (ftdi);
- ftdi_error_return(-9, "unable to fetch serial number");
+ ftdi_error_return_free_device_list(-9, "unable to fetch serial number", devs);
}
if (strncmp(string, serial, sizeof(string)) != 0)
{
continue;
}
- return ftdi_usb_open_dev(ftdi, dev);
+ res = ftdi_usb_open_dev(ftdi, dev);
+ libusb_free_device_list(devs,1);
+ return res;
}
}
// device not found
- ftdi_error_return(-3, "device not found");
+ ftdi_error_return_free_device_list(-3, "device not found", devs);
}
/**
\retval -9: get serial number failed
\retval -10: unable to close device
\retval -11: illegal description format
+ \retval -12: ftdi context invalid
*/
int ftdi_usb_open_string(struct ftdi_context *ftdi, const char* description)
{
+ if (ftdi == NULL)
+ ftdi_error_return(-12, "ftdi context invalid");
+
if (description[0] == 0 || description[1] != ':')
ftdi_error_return(-11, "illegal description format");
unsigned int bus_number, device_address;
int i = 0;
- if (libusb_init (NULL) < 0)
+ if (libusb_init (&ftdi->usb_ctx) < 0)
ftdi_error_return(-1, "libusb_init() failed");
- if (libusb_get_device_list(NULL, &devs) < 0)
+ if (libusb_get_device_list(ftdi->usb_ctx, &devs) < 0)
ftdi_error_return(-2, "libusb_get_device_list() failed");
/* XXX: This doesn't handle symlinks/odd paths/etc... */
if (sscanf (description + 2, "%u/%u", &bus_number, &device_address) != 2)
- ftdi_error_return(-11, "illegal description format");
+ ftdi_error_return_free_device_list(-11, "illegal description format", devs);
while ((dev = devs[i++]) != NULL)
{
+ int ret;
if (bus_number == libusb_get_bus_number (dev)
&& device_address == libusb_get_device_address (dev))
- return ftdi_usb_open_dev(ftdi, dev);
+ {
+ ret = ftdi_usb_open_dev(ftdi, dev);
+ libusb_free_device_list(devs,1);
+ return ret;
+ }
}
// device not found
- ftdi_error_return(-3, "device not found");
+ ftdi_error_return_free_device_list(-3, "device not found", devs);
}
else if (description[0] == 'i' || description[0] == 's')
{
\retval 0: all fine
\retval -1: FTDI reset failed
+ \retval -2: USB device unavailable
*/
int ftdi_usb_reset(struct ftdi_context *ftdi)
{
+ if (ftdi == NULL || ftdi->usb_dev == NULL)
+ ftdi_error_return(-2, "USB device unavailable");
+
if (libusb_control_transfer(ftdi->usb_dev, FTDI_DEVICE_OUT_REQTYPE,
SIO_RESET_REQUEST, SIO_RESET_SIO,
ftdi->index, NULL, 0, ftdi->usb_write_timeout) < 0)
\retval 0: all fine
\retval -1: read buffer purge failed
+ \retval -2: USB device unavailable
*/
int ftdi_usb_purge_rx_buffer(struct ftdi_context *ftdi)
{
+ if (ftdi == NULL || ftdi->usb_dev == NULL)
+ ftdi_error_return(-2, "USB device unavailable");
+
if (libusb_control_transfer(ftdi->usb_dev, FTDI_DEVICE_OUT_REQTYPE,
SIO_RESET_REQUEST, SIO_RESET_PURGE_RX,
ftdi->index, NULL, 0, ftdi->usb_write_timeout) < 0)
\retval 0: all fine
\retval -1: write buffer purge failed
+ \retval -2: USB device unavailable
*/
int ftdi_usb_purge_tx_buffer(struct ftdi_context *ftdi)
{
+ if (ftdi == NULL || ftdi->usb_dev == NULL)
+ ftdi_error_return(-2, "USB device unavailable");
+
if (libusb_control_transfer(ftdi->usb_dev, FTDI_DEVICE_OUT_REQTYPE,
SIO_RESET_REQUEST, SIO_RESET_PURGE_TX,
ftdi->index, NULL, 0, ftdi->usb_write_timeout) < 0)
\retval 0: all fine
\retval -1: read buffer purge failed
\retval -2: write buffer purge failed
+ \retval -3: USB device unavailable
*/
int ftdi_usb_purge_buffers(struct ftdi_context *ftdi)
{
int result;
+ if (ftdi == NULL || ftdi->usb_dev == NULL)
+ ftdi_error_return(-3, "USB device unavailable");
+
result = ftdi_usb_purge_rx_buffer(ftdi);
if (result < 0)
return -1;
\retval 0: all fine
\retval -1: usb_release failed
+ \retval -3: ftdi context invalid
*/
int ftdi_usb_close(struct ftdi_context *ftdi)
{
int rtn = 0;
+ if (ftdi == NULL)
+ ftdi_error_return(-3, "ftdi context invalid");
+
if (ftdi->usb_dev != NULL)
if (libusb_release_interface(ftdi->usb_dev, ftdi->interface) < 0)
rtn = -1;
\retval 0: all fine
\retval -1: invalid baudrate
\retval -2: setting baudrate failed
+ \retval -3: USB device unavailable
*/
int ftdi_set_baudrate(struct ftdi_context *ftdi, int baudrate)
{
unsigned short value, index;
int actual_baudrate;
+ if (ftdi == NULL || ftdi->usb_dev == NULL)
+ ftdi_error_return(-3, "USB device unavailable");
+
if (ftdi->bitbang_enabled)
{
baudrate = baudrate*4;
\retval 0: all fine
\retval -1: Setting line property failed
+ \retval -2: USB device unavailable
*/
int ftdi_set_line_property2(struct ftdi_context *ftdi, enum ftdi_bits_type bits,
enum ftdi_stopbits_type sbit, enum ftdi_parity_type parity,
{
unsigned short value = bits;
+ if (ftdi == NULL || ftdi->usb_dev == NULL)
+ ftdi_error_return(-2, "USB device unavailable");
+
switch (parity)
{
case NONE:
\param buf Buffer with the data
\param size Size of the buffer
+ \retval -666: USB device unavailable
\retval <0: error code from usb_bulk_write()
\retval >0: number of bytes written
*/
int offset = 0;
int actual_length;
+ if (ftdi == NULL || ftdi->usb_dev == NULL)
+ ftdi_error_return(-666, "USB device unavailable");
+
while (offset < size)
{
int write_size = ftdi->writebuffer_chunksize;
return offset;
}
-#ifdef LIBFTDI_LINUX_ASYNC_MODE
-#ifdef USB_CLASS_PTP
-#error LIBFTDI_LINUX_ASYNC_MODE is not compatible with libusb-compat-0.1!
-#endif
static void ftdi_read_data_cb(struct libusb_transfer *transfer)
{
struct ftdi_transfer_control *tc = (struct ftdi_transfer_control *) transfer->user_data;
struct ftdi_context *ftdi = tc->ftdi;
int packet_size, actual_length, num_of_chunks, chunk_remains, i, ret;
- // New hi-speed devices from FTDI use a packet size of 512 bytes
- if (ftdi->type == TYPE_2232H || ftdi->type == TYPE_4232H)
- packet_size = 512;
- else
- packet_size = 64;
+ packet_size = ftdi->max_packet_size;
actual_length = transfer->actual_length;
{
struct ftdi_transfer_control *tc = (struct ftdi_transfer_control *) transfer->user_data;
struct ftdi_context *ftdi = tc->ftdi;
-
- tc->offset = transfer->actual_length;
-
+
+ tc->offset += transfer->actual_length;
+
if (tc->offset == tc->size)
{
tc->completed = 1;
Writes data to the chip. Does not wait for completion of the transfer
nor does it make sure that the transfer was successful.
- Use libusb 1.0 Asynchronous API.
- Only available if compiled with --with-async-mode.
+ Use libusb 1.0 asynchronous API.
\param ftdi pointer to ftdi_context
\param buf Buffer with the data
struct libusb_transfer *transfer = libusb_alloc_transfer(0);
int write_size, ret;
+ if (ftdi == NULL || ftdi->usb_dev == NULL)
+ {
+ libusb_free_transfer(transfer);
+ return NULL;
+ }
+
tc = (struct ftdi_transfer_control *) malloc (sizeof (*tc));
if (!tc || !transfer)
else
write_size = ftdi->writebuffer_chunksize;
- libusb_fill_bulk_transfer(transfer, ftdi->usb_dev, ftdi->in_ep, buf, write_size, ftdi_write_data_cb, tc, ftdi->usb_write_timeout);
+ libusb_fill_bulk_transfer(transfer, ftdi->usb_dev, ftdi->in_ep, buf,
+ write_size, ftdi_write_data_cb, tc,
+ ftdi->usb_write_timeout);
transfer->type = LIBUSB_TRANSFER_TYPE_BULK;
ret = libusb_submit_transfer(transfer);
Reads data from the chip. Does not wait for completion of the transfer
nor does it make sure that the transfer was successful.
- Use libusb 1.0 Asynchronous API.
- Only available if compiled with --with-async-mode.
+ Use libusb 1.0 asynchronous API.
\param ftdi pointer to ftdi_context
\param buf Buffer with the data
struct libusb_transfer *transfer;
int ret;
+ if (ftdi == NULL || ftdi->usb_dev == NULL)
+ return NULL;
+
tc = (struct ftdi_transfer_control *) malloc (sizeof (*tc));
if (!tc)
return NULL;
/**
Wait for completion of the transfer.
- Use libusb 1.0 Asynchronous API.
- Only available if compiled with --with-async-mode.
+ Use libusb 1.0 asynchronous API.
\param tc pointer to ftdi_transfer_control
while (!tc->completed)
{
- ret = libusb_handle_events(NULL);
+ ret = libusb_handle_events(tc->ftdi->usb_ctx);
if (ret < 0)
{
if (ret == LIBUSB_ERROR_INTERRUPTED)
continue;
libusb_cancel_transfer(tc->transfer);
while (!tc->completed)
- if (libusb_handle_events(NULL) < 0)
+ if (libusb_handle_events(tc->ftdi->usb_ctx) < 0)
break;
libusb_free_transfer(tc->transfer);
free (tc);
- tc = NULL;
return ret;
}
}
- if (tc->transfer->status == LIBUSB_TRANSFER_COMPLETED)
- ret = tc->offset;
- else
- ret = -1;
-
- libusb_free_transfer(tc->transfer);
+ ret = tc->offset;
+ /**
+ * tc->transfer could be NULL if "(size <= ftdi->readbuffer_remaining)"
+ * at ftdi_read_data_submit(). Therefore, we need to check it here.
+ **/
+ if (tc->transfer)
+ {
+ if (tc->transfer->status != LIBUSB_TRANSFER_COMPLETED)
+ ret = -1;
+ libusb_free_transfer(tc->transfer);
+ }
free(tc);
return ret;
}
-#endif // LIBFTDI_LINUX_ASYNC_MODE
-
/**
Configure write buffer chunk size.
Default is 4096.
\param chunksize Chunk size
\retval 0: all fine
+ \retval -1: ftdi context invalid
*/
int ftdi_write_data_set_chunksize(struct ftdi_context *ftdi, unsigned int chunksize)
{
+ if (ftdi == NULL)
+ ftdi_error_return(-1, "ftdi context invalid");
+
ftdi->writebuffer_chunksize = chunksize;
return 0;
}
\param chunksize Pointer to store chunk size in
\retval 0: all fine
+ \retval -1: ftdi context invalid
*/
int ftdi_write_data_get_chunksize(struct ftdi_context *ftdi, unsigned int *chunksize)
{
+ if (ftdi == NULL)
+ ftdi_error_return(-1, "ftdi context invalid");
+
*chunksize = ftdi->writebuffer_chunksize;
return 0;
}
\param buf Buffer to store data in
\param size Size of the buffer
+ \retval -666: USB device unavailable
\retval <0: error code from libusb_bulk_transfer()
\retval 0: no data was available
\retval >0: number of bytes read
int packet_size = ftdi->max_packet_size;
int actual_length = 1;
+ if (ftdi == NULL || ftdi->usb_dev == NULL)
+ ftdi_error_return(-666, "USB device unavailable");
+
// Packet size sanity check (avoid division by zero)
if (packet_size == 0)
ftdi_error_return(-1, "max_packet_size is bogus (zero)");
\param chunksize Chunk size
\retval 0: all fine
+ \retval -1: ftdi context invalid
*/
int ftdi_read_data_set_chunksize(struct ftdi_context *ftdi, unsigned int chunksize)
{
unsigned char *new_buf;
+ if (ftdi == NULL)
+ ftdi_error_return(-1, "ftdi context invalid");
+
// Invalidate all remaining data
ftdi->readbuffer_offset = 0;
ftdi->readbuffer_remaining = 0;
+#ifdef __linux__
+ /* We can't set readbuffer_chunksize larger than MAX_BULK_BUFFER_LENGTH,
+ which is defined in libusb-1.0. Otherwise, each USB read request will
+ be divided into multiple URBs. This will cause issues on Linux kernel
+ older than 2.6.32. */
+ if (chunksize > 16384)
+ chunksize = 16384;
+#endif
if ((new_buf = (unsigned char *)realloc(ftdi->readbuffer, chunksize)) == NULL)
ftdi_error_return(-1, "out of memory for readbuffer");
\param chunksize Pointer to store chunk size in
\retval 0: all fine
+ \retval -1: FTDI context invalid
*/
int ftdi_read_data_get_chunksize(struct ftdi_context *ftdi, unsigned int *chunksize)
{
+ if (ftdi == NULL)
+ ftdi_error_return(-1, "FTDI context invalid");
+
*chunksize = ftdi->readbuffer_chunksize;
return 0;
}
\retval 0: all fine
\retval -1: can't enable bitbang mode
+ \retval -2: USB device unavailable
*/
int ftdi_enable_bitbang(struct ftdi_context *ftdi, unsigned char bitmask)
{
unsigned short usb_val;
+ if (ftdi == NULL || ftdi->usb_dev == NULL)
+ ftdi_error_return(-2, "USB device unavailable");
+
usb_val = bitmask; // low byte: bitmask
/* FT2232C: Set bitbang_mode to 2 to enable SPI */
usb_val |= (ftdi->bitbang_mode << 8);
\retval 0: all fine
\retval -1: can't disable bitbang mode
+ \retval -2: USB device unavailable
*/
int ftdi_disable_bitbang(struct ftdi_context *ftdi)
{
+ if (ftdi == NULL || ftdi->usb_dev == NULL)
+ ftdi_error_return(-2, "USB device unavailable");
+
if (libusb_control_transfer(ftdi->usb_dev, FTDI_DEVICE_OUT_REQTYPE, SIO_SET_BITMODE_REQUEST, 0, ftdi->index, NULL, 0, ftdi->usb_write_timeout) < 0)
ftdi_error_return(-1, "unable to leave bitbang mode. Perhaps not a BM type chip?");
\retval 0: all fine
\retval -1: can't enable bitbang mode
+ \retval -2: USB device unavailable
*/
int ftdi_set_bitmode(struct ftdi_context *ftdi, unsigned char bitmask, unsigned char mode)
{
unsigned short usb_val;
+ if (ftdi == NULL || ftdi->usb_dev == NULL)
+ ftdi_error_return(-2, "USB device unavailable");
+
usb_val = bitmask; // low byte: bitmask
usb_val |= (mode << 8);
if (libusb_control_transfer(ftdi->usb_dev, FTDI_DEVICE_OUT_REQTYPE, SIO_SET_BITMODE_REQUEST, usb_val, ftdi->index, NULL, 0, ftdi->usb_write_timeout) < 0)
\retval 0: all fine
\retval -1: read pins failed
+ \retval -2: USB device unavailable
*/
int ftdi_read_pins(struct ftdi_context *ftdi, unsigned char *pins)
{
+ if (ftdi == NULL || ftdi->usb_dev == NULL)
+ ftdi_error_return(-2, "USB device unavailable");
+
if (libusb_control_transfer(ftdi->usb_dev, FTDI_DEVICE_IN_REQTYPE, SIO_READ_PINS_REQUEST, 0, ftdi->index, (unsigned char *)pins, 1, ftdi->usb_read_timeout) != 1)
ftdi_error_return(-1, "read pins failed");
\retval 0: all fine
\retval -1: latency out of range
\retval -2: unable to set latency timer
+ \retval -3: USB device unavailable
*/
int ftdi_set_latency_timer(struct ftdi_context *ftdi, unsigned char latency)
{
if (latency < 1)
ftdi_error_return(-1, "latency out of range. Only valid for 1-255");
+ if (ftdi == NULL || ftdi->usb_dev == NULL)
+ ftdi_error_return(-3, "USB device unavailable");
+
usb_val = latency;
if (libusb_control_transfer(ftdi->usb_dev, FTDI_DEVICE_OUT_REQTYPE, SIO_SET_LATENCY_TIMER_REQUEST, usb_val, ftdi->index, NULL, 0, ftdi->usb_write_timeout) < 0)
ftdi_error_return(-2, "unable to set latency timer");
\retval 0: all fine
\retval -1: unable to get latency timer
+ \retval -2: USB device unavailable
*/
int ftdi_get_latency_timer(struct ftdi_context *ftdi, unsigned char *latency)
{
unsigned short usb_val;
+
+ if (ftdi == NULL || ftdi->usb_dev == NULL)
+ ftdi_error_return(-2, "USB device unavailable");
+
if (libusb_control_transfer(ftdi->usb_dev, FTDI_DEVICE_IN_REQTYPE, SIO_GET_LATENCY_TIMER_REQUEST, 0, ftdi->index, (unsigned char *)&usb_val, 1, ftdi->usb_read_timeout) != 1)
ftdi_error_return(-1, "reading latency timer failed");
\retval 0: all fine
\retval -1: unable to retrieve status information
+ \retval -2: USB device unavailable
*/
int ftdi_poll_modem_status(struct ftdi_context *ftdi, unsigned short *status)
{
char usb_val[2];
+ if (ftdi == NULL || ftdi->usb_dev == NULL)
+ ftdi_error_return(-2, "USB device unavailable");
+
if (libusb_control_transfer(ftdi->usb_dev, FTDI_DEVICE_IN_REQTYPE, SIO_POLL_MODEM_STATUS_REQUEST, 0, ftdi->index, (unsigned char *)usb_val, 2, ftdi->usb_read_timeout) != 2)
ftdi_error_return(-1, "getting modem status failed");
\retval 0: all fine
\retval -1: set flow control failed
+ \retval -2: USB device unavailable
*/
int ftdi_setflowctrl(struct ftdi_context *ftdi, int flowctrl)
{
+ if (ftdi == NULL || ftdi->usb_dev == NULL)
+ ftdi_error_return(-2, "USB device unavailable");
+
if (libusb_control_transfer(ftdi->usb_dev, FTDI_DEVICE_OUT_REQTYPE,
SIO_SET_FLOW_CTRL_REQUEST, 0, (flowctrl | ftdi->index),
NULL, 0, ftdi->usb_write_timeout) < 0)
\retval 0: all fine
\retval -1: set dtr failed
+ \retval -2: USB device unavailable
*/
int ftdi_setdtr(struct ftdi_context *ftdi, int state)
{
unsigned short usb_val;
+ if (ftdi == NULL || ftdi->usb_dev == NULL)
+ ftdi_error_return(-2, "USB device unavailable");
+
if (state)
usb_val = SIO_SET_DTR_HIGH;
else
\param state state to set line to (1 or 0)
\retval 0: all fine
- \retval -1 set rts failed
+ \retval -1: set rts failed
+ \retval -2: USB device unavailable
*/
int ftdi_setrts(struct ftdi_context *ftdi, int state)
{
unsigned short usb_val;
+ if (ftdi == NULL || ftdi->usb_dev == NULL)
+ ftdi_error_return(-2, "USB device unavailable");
+
if (state)
usb_val = SIO_SET_RTS_HIGH;
else
}
/**
- Set dtr and rts line in one pass
+ Set dtr and rts line in one pass
- \param ftdi pointer to ftdi_context
- \param dtr DTR state to set line to (1 or 0)
- \param rts RTS state to set line to (1 or 0)
+ \param ftdi pointer to ftdi_context
+ \param dtr DTR state to set line to (1 or 0)
+ \param rts RTS state to set line to (1 or 0)
- \retval 0: all fine
- \retval -1 set dtr/rts failed
+ \retval 0: all fine
+ \retval -1: set dtr/rts failed
+ \retval -2: USB device unavailable
*/
int ftdi_setdtr_rts(struct ftdi_context *ftdi, int dtr, int rts)
{
unsigned short usb_val;
+ if (ftdi == NULL || ftdi->usb_dev == NULL)
+ ftdi_error_return(-2, "USB device unavailable");
+
if (dtr)
usb_val = SIO_SET_DTR_HIGH;
else
\retval 0: all fine
\retval -1: unable to set event character
+ \retval -2: USB device unavailable
*/
int ftdi_set_event_char(struct ftdi_context *ftdi,
unsigned char eventch, unsigned char enable)
{
unsigned short usb_val;
+ if (ftdi == NULL || ftdi->usb_dev == NULL)
+ ftdi_error_return(-2, "USB device unavailable");
+
usb_val = eventch;
if (enable)
usb_val |= 1 << 8;
\retval 0: all fine
\retval -1: unable to set error character
+ \retval -2: USB device unavailable
*/
int ftdi_set_error_char(struct ftdi_context *ftdi,
unsigned char errorch, unsigned char enable)
{
unsigned short usb_val;
+ if (ftdi == NULL || ftdi->usb_dev == NULL)
+ ftdi_error_return(-2, "USB device unavailable");
+
usb_val = errorch;
if (enable)
usb_val |= 1 << 8;
}
/**
- Set the eeprom size
-
- \param ftdi pointer to ftdi_context
- \param eeprom Pointer to ftdi_eeprom
- \param size
-
-*/
-void ftdi_eeprom_setsize(struct ftdi_context *ftdi, struct ftdi_eeprom *eeprom, int size)
-{
- ftdi->eeprom_size=size;
- eeprom->size=size;
-}
-
-/**
Init eeprom with default values.
+ \param ftdi pointer to ftdi_context
+ \param manufacturer String to use as Manufacturer
+ \param product String to use as Product description
+ \param serial String to use as Serial number description
- \param eeprom Pointer to ftdi_eeprom
+ \retval 0: all fine
+ \retval -1: No struct ftdi_context
+ \retval -2: No struct ftdi_eeprom
*/
-void ftdi_eeprom_initdefaults(struct ftdi_eeprom *eeprom)
+int ftdi_eeprom_initdefaults(struct ftdi_context *ftdi, char * manufacturer,
+ char * product, char * serial)
{
- eeprom->vendor_id = 0x0403;
- eeprom->product_id = 0x6001;
+ struct ftdi_eeprom *eeprom;
- eeprom->self_powered = 1;
- eeprom->remote_wakeup = 1;
- eeprom->BM_type_chip = 1;
+ if (ftdi == NULL)
+ ftdi_error_return(-1, "No struct ftdi_context");
- eeprom->in_is_isochronous = 0;
- eeprom->out_is_isochronous = 0;
- eeprom->suspend_pull_downs = 0;
+ if (ftdi->eeprom == NULL)
+ ftdi_error_return(-2,"No struct ftdi_eeprom");
- eeprom->use_serial = 0;
- eeprom->change_usb_version = 0;
- eeprom->usb_version = 0x0200;
- eeprom->max_power = 0;
+ eeprom = ftdi->eeprom;
+ memset(eeprom, 0, sizeof(struct ftdi_eeprom));
+
+ eeprom->vendor_id = 0x0403;
+ eeprom->use_serial = USE_SERIAL_NUM;
+ if((ftdi->type == TYPE_AM) || (ftdi->type == TYPE_BM) ||
+ (ftdi->type == TYPE_R))
+ eeprom->product_id = 0x6001;
+ else
+ eeprom->product_id = 0x6010;
+ if (ftdi->type == TYPE_AM)
+ eeprom->usb_version = 0x0101;
+ else
+ eeprom->usb_version = 0x0200;
+ eeprom->max_power = 100;
+ if (eeprom->manufacturer)
+ free (eeprom->manufacturer);
eeprom->manufacturer = NULL;
+ if (manufacturer)
+ {
+ eeprom->manufacturer = malloc(strlen(manufacturer)+1);
+ if (eeprom->manufacturer)
+ strcpy(eeprom->manufacturer, manufacturer);
+ }
+
+ if (eeprom->product)
+ free (eeprom->product);
eeprom->product = NULL;
+ {
+ eeprom->product = malloc(strlen(product)+1);
+ if (eeprom->product)
+ strcpy(eeprom->product, product);
+ }
+
+ if (eeprom->serial)
+ free (eeprom->serial);
eeprom->serial = NULL;
+ if (serial)
+ {
+ eeprom->serial = malloc(strlen(serial)+1);
+ if (eeprom->serial)
+ strcpy(eeprom->serial, serial);
+ }
- eeprom->size = FTDI_DEFAULT_EEPROM_SIZE;
+
+ if(ftdi->type == TYPE_R)
+ {
+ eeprom->max_power = 90;
+ eeprom->size = 0x80;
+ eeprom->cbus_function[0] = CBUS_TXLED;
+ eeprom->cbus_function[1] = CBUS_RXLED;
+ eeprom->cbus_function[2] = CBUS_TXDEN;
+ eeprom->cbus_function[3] = CBUS_PWREN;
+ eeprom->cbus_function[4] = CBUS_SLEEP;
+ }
+ else
+ eeprom->size = -1;
+ return 0;
}
/**
- Build binary output from ftdi_eeprom structure.
- Output is suitable for ftdi_write_eeprom().
+ Build binary buffer from ftdi_eeprom structure.
+ Output is suitable for ftdi_write_eeprom().
- \param eeprom Pointer to ftdi_eeprom
- \param output Buffer of 128 bytes to store eeprom image to
+ \param ftdi pointer to ftdi_context
- \retval >0: used eeprom size
- \retval -1: eeprom size (128 bytes) exceeded by custom strings
+ \retval >0: free eeprom size
+ \retval -1: eeprom size (128 bytes) exceeded by custom strings
+ \retval -2: Invalid eeprom pointer
+ \retval -3: Invalid cbus function setting
+ \retval -4: Chip doesn't support invert
+ \retval -5: Chip doesn't support high current drive
+ \retval -6: No connected EEPROM or EEPROM Type unknown
*/
-int ftdi_eeprom_build(struct ftdi_eeprom *eeprom, unsigned char *output)
+int ftdi_eeprom_build(struct ftdi_context *ftdi)
{
- unsigned char i, j;
+ unsigned char i, j, eeprom_size_mask;
unsigned short checksum, value;
unsigned char manufacturer_size = 0, product_size = 0, serial_size = 0;
int size_check;
+ struct ftdi_eeprom *eeprom;
+ unsigned char * output;
+
+ if (ftdi == NULL)
+ ftdi_error_return(-2,"No context");
+ if (ftdi->eeprom == NULL)
+ ftdi_error_return(-2,"No eeprom structure");
+
+ eeprom= ftdi->eeprom;
+ output = eeprom->buf;
+
+ if(eeprom->chip == -1)
+ ftdi_error_return(-5,"No connected EEPROM or EEPROM type unknown");
+
+ if ((eeprom->chip == 0x56) || (eeprom->chip == 0x66))
+ eeprom->size = 0x100;
+ else
+ eeprom->size = 0x80;
if (eeprom->manufacturer != NULL)
manufacturer_size = strlen(eeprom->manufacturer);
if (eeprom->serial != NULL)
serial_size = strlen(eeprom->serial);
- size_check = eeprom->size;
- size_check -= 28; // 28 are always in use (fixed)
+ size_check = 0x80;
+ switch(ftdi->type)
+ {
+ case TYPE_2232H:
+ case TYPE_4232H:
+ size_check -= 4;
+ case TYPE_R:
+ size_check -= 4;
+ case TYPE_2232C:
+ size_check -= 4;
+ case TYPE_AM:
+ case TYPE_BM:
+ size_check -= 0x14*2;
+ }
- // Top half of a 256byte eeprom is used just for strings and checksum
- // it seems that the FTDI chip will not read these strings from the lower half
- // Each string starts with two bytes; offset and type (0x03 for string)
- // the checksum needs two bytes, so without the string data that 8 bytes from the top half
- if (eeprom->size>=256)size_check = 120;
size_check -= manufacturer_size*2;
size_check -= product_size*2;
size_check -= serial_size*2;
+ /* Space for the string type and pointer bytes */
+ size_check -= -9;
+
// eeprom size exceeded?
if (size_check < 0)
return (-1);
// empty eeprom
- memset (output, 0, eeprom->size);
+ memset (ftdi->eeprom->buf, 0, FTDI_MAX_EEPROM_SIZE);
+
+ // Bytes and Bits set for all Types
- // Addr 00: Stay 00 00
// Addr 02: Vendor ID
output[0x02] = eeprom->vendor_id;
output[0x03] = eeprom->vendor_id >> 8;
// Addr 06: Device release number (0400h for BM features)
output[0x06] = 0x00;
-
- if (eeprom->BM_type_chip == 1)
- output[0x07] = 0x04;
- else
- output[0x07] = 0x02;
+ switch (ftdi->type) {
+ case TYPE_AM:
+ output[0x07] = 0x02;
+ break;
+ case TYPE_BM:
+ output[0x07] = 0x04;
+ break;
+ case TYPE_2232C:
+ output[0x07] = 0x05;
+ break;
+ case TYPE_R:
+ output[0x07] = 0x06;
+ break;
+ case TYPE_2232H:
+ output[0x07] = 0x07;
+ break;
+ case TYPE_4232H:
+ output[0x07] = 0x08;
+ break;
+ default:
+ output[0x07] = 0x00;
+ }
// Addr 08: Config descriptor
// Bit 7: always 1
// Bit 6: 1 if this device is self powered, 0 if bus powered
// Bit 5: 1 if this device uses remote wakeup
- // Bit 4: 1 if this device is battery powered
+ // Bit 4-0: reserved - 0
j = 0x80;
if (eeprom->self_powered == 1)
j |= 0x40;
output[0x08] = j;
// Addr 09: Max power consumption: max power = value * 2 mA
- output[0x09] = eeprom->max_power;
+ output[0x09] = eeprom->max_power>>1;
- // Addr 0A: Chip configuration
- // Bit 7: 0 - reserved
- // Bit 6: 0 - reserved
- // Bit 5: 0 - reserved
- // Bit 4: 1 - Change USB version
- // Bit 3: 1 - Use the serial number string
- // Bit 2: 1 - Enable suspend pull downs for lower power
- // Bit 1: 1 - Out EndPoint is Isochronous
- // Bit 0: 1 - In EndPoint is Isochronous
- //
- j = 0;
- if (eeprom->in_is_isochronous == 1)
- j = j | 1;
- if (eeprom->out_is_isochronous == 1)
- j = j | 2;
- if (eeprom->suspend_pull_downs == 1)
- j = j | 4;
- if (eeprom->use_serial == 1)
- j = j | 8;
- if (eeprom->change_usb_version == 1)
- j = j | 16;
- output[0x0A] = j;
-
- // Addr 0B: reserved
- output[0x0B] = 0x00;
-
- // Addr 0C: USB version low byte when 0x0A bit 4 is set
- // Addr 0D: USB version high byte when 0x0A bit 4 is set
- if (eeprom->change_usb_version == 1)
+ if(ftdi->type != TYPE_AM)
{
- output[0x0C] = eeprom->usb_version;
- output[0x0D] = eeprom->usb_version >> 8;
+ // Addr 0A: Chip configuration
+ // Bit 7: 0 - reserved
+ // Bit 6: 0 - reserved
+ // Bit 5: 0 - reserved
+ // Bit 4: 1 - Change USB version
+ // Bit 3: 1 - Use the serial number string
+ // Bit 2: 1 - Enable suspend pull downs for lower power
+ // Bit 1: 1 - Out EndPoint is Isochronous
+ // Bit 0: 1 - In EndPoint is Isochronous
+ //
+ j = 0;
+ if (eeprom->in_is_isochronous == 1)
+ j = j | 1;
+ if (eeprom->out_is_isochronous == 1)
+ j = j | 2;
+ output[0x0A] = j;
}
+ // Dynamic content
+ // Strings start at 0x94 (TYPE_AM, TYPE_BM)
+ // 0x96 (TYPE_2232C), 0x98 (TYPE_R) and 0x9a (TYPE_x232H)
+ i = 0;
+ switch(ftdi->type)
+ {
+ case TYPE_2232H:
+ case TYPE_4232H:
+ i += 2;
+ case TYPE_R:
+ i += 2;
+ case TYPE_2232C:
+ i += 2;
+ case TYPE_AM:
+ case TYPE_BM:
+ i += 0x94;
+ }
+ /* Wrap around 0x80 for 128 byte EEPROMS (Internale and 93x46) */
+ eeprom_size_mask = eeprom->size -1;
// Addr 0E: Offset of the manufacturer string + 0x80, calculated later
// Addr 0F: Length of manufacturer string
+ // Output manufacturer
+ output[0x0E] = i; // calculate offset
+ output[i & eeprom_size_mask] = manufacturer_size*2 + 2, i++;
+ output[i & eeprom_size_mask] = 0x03, i++; // type: string
+ for (j = 0; j < manufacturer_size; j++)
+ {
+ output[i & eeprom_size_mask] = eeprom->manufacturer[j], i++;
+ output[i & eeprom_size_mask] = 0x00, i++;
+ }
output[0x0F] = manufacturer_size*2 + 2;
// Addr 10: Offset of the product string + 0x80, calculated later
// Addr 11: Length of product string
+ output[0x10] = i | 0x80; // calculate offset
+ output[i & eeprom_size_mask] = product_size*2 + 2, i++;
+ output[i & eeprom_size_mask] = 0x03, i++;
+ for (j = 0; j < product_size; j++)
+ {
+ output[i & eeprom_size_mask] = eeprom->product[j], i++;
+ output[i & eeprom_size_mask] = 0x00, i++;
+ }
output[0x11] = product_size*2 + 2;
// Addr 12: Offset of the serial string + 0x80, calculated later
// Addr 13: Length of serial string
- output[0x13] = serial_size*2 + 2;
-
- // Dynamic content
- i=0x14;
- if (eeprom->size>=256) i = 0x80;
-
-
- // Output manufacturer
- output[0x0E] = i | 0x80; // calculate offset
- output[i++] = manufacturer_size*2 + 2;
- output[i++] = 0x03; // type: string
- for (j = 0; j < manufacturer_size; j++)
+ output[0x12] = i | 0x80; // calculate offset
+ output[i & eeprom_size_mask] = serial_size*2 + 2, i++;
+ output[i & eeprom_size_mask] = 0x03, i++;
+ for (j = 0; j < serial_size; j++)
{
- output[i] = eeprom->manufacturer[j], i++;
- output[i] = 0x00, i++;
+ output[i & eeprom_size_mask] = eeprom->serial[j], i++;
+ output[i & eeprom_size_mask] = 0x00, i++;
}
+ output[i & eeprom_size_mask] = 0x02; /* as seen when written with FTD2XX */
+ i++;
+ output[i & eeprom_size_mask] = 0x03; /* as seen when written with FTD2XX */
+ i++;
+ output[i & eeprom_size_mask] = eeprom->is_not_pnp; /* as seen when written with FTD2XX */
+ i++;
- // Output product name
- output[0x10] = i | 0x80; // calculate offset
- output[i] = product_size*2 + 2, i++;
- output[i] = 0x03, i++;
- for (j = 0; j < product_size; j++)
+ output[0x13] = serial_size*2 + 2;
+
+ if(ftdi->type > TYPE_AM) /*use_serial not used in AM devices*/
{
- output[i] = eeprom->product[j], i++;
- output[i] = 0x00, i++;
+ if (eeprom->use_serial == USE_SERIAL_NUM )
+ output[0x0A] |= USE_SERIAL_NUM;
+ else
+ output[0x0A] &= ~USE_SERIAL_NUM;
}
+ /* Fixme: ftd2xx seems to append 0x02, 0x03 and 0x01 for PnP = 0 or 0x00 else */
+ // calculate checksum
- // Output serial
- output[0x12] = i | 0x80; // calculate offset
- output[i] = serial_size*2 + 2, i++;
- output[i] = 0x03, i++;
- for (j = 0; j < serial_size; j++)
+ /* Bytes and Bits specific to (some) types
+ Write linear, as this allows easier fixing*/
+ switch(ftdi->type)
{
- output[i] = eeprom->serial[j], i++;
- output[i] = 0x00, i++;
+ case TYPE_AM:
+ break;
+ case TYPE_BM:
+ output[0x0C] = eeprom->usb_version & 0xff;
+ output[0x0D] = (eeprom->usb_version>>8) & 0xff;
+ output[0x14] = eeprom->chip;
+ break;
+ case TYPE_2232C:
+
+ output[0x00] = (eeprom->channel_a_type);
+ if ( eeprom->channel_a_driver == DRIVER_VCP)
+ output[0x00] |= DRIVER_VCP;
+ else
+ output[0x00] &= ~DRIVER_VCP;
+
+ if ( eeprom->high_current_a == HIGH_CURRENT_DRIVE)
+ output[0x00] |= HIGH_CURRENT_DRIVE;
+ else
+ output[0x00] &= ~HIGH_CURRENT_DRIVE;
+
+ output[0x01] = (eeprom->channel_b_type);
+ if ( eeprom->channel_b_driver == DRIVER_VCP)
+ output[0x01] |= DRIVER_VCP;
+ else
+ output[0x01] &= ~DRIVER_VCP;
+
+ if ( eeprom->high_current_b == HIGH_CURRENT_DRIVE)
+ output[0x01] |= HIGH_CURRENT_DRIVE;
+ else
+ output[0x01] &= ~HIGH_CURRENT_DRIVE;
+
+ if (eeprom->in_is_isochronous == 1)
+ output[0x0A] |= 0x1;
+ else
+ output[0x0A] &= ~0x1;
+ if (eeprom->out_is_isochronous == 1)
+ output[0x0A] |= 0x2;
+ else
+ output[0x0A] &= ~0x2;
+ if (eeprom->suspend_pull_downs == 1)
+ output[0x0A] |= 0x4;
+ else
+ output[0x0A] &= ~0x4;
+ output[0x0C] = eeprom->usb_version & 0xff;
+ output[0x0D] = (eeprom->usb_version>>8) & 0xff;
+ output[0x14] = eeprom->chip;
+ break;
+ case TYPE_R:
+ if(eeprom->high_current == HIGH_CURRENT_DRIVE_R)
+ output[0x00] |= HIGH_CURRENT_DRIVE_R;
+ output[0x01] = 0x40; /* Hard coded Endpoint Size*/
+
+ if (eeprom->suspend_pull_downs == 1)
+ output[0x0A] |= 0x4;
+ else
+ output[0x0A] &= ~0x4;
+ output[0x0B] = eeprom->invert;
+ output[0x0C] = eeprom->usb_version & 0xff;
+ output[0x0D] = (eeprom->usb_version>>8) & 0xff;
+
+ if(eeprom->cbus_function[0] > CBUS_BB)
+ output[0x14] = CBUS_TXLED;
+ else
+ output[0x14] = eeprom->cbus_function[0];
+
+ if(eeprom->cbus_function[1] > CBUS_BB)
+ output[0x14] |= CBUS_RXLED<<4;
+ else
+ output[0x14] |= eeprom->cbus_function[1]<<4;
+
+ if(eeprom->cbus_function[2] > CBUS_BB)
+ output[0x15] = CBUS_TXDEN;
+ else
+ output[0x15] = eeprom->cbus_function[2];
+
+ if(eeprom->cbus_function[3] > CBUS_BB)
+ output[0x15] |= CBUS_PWREN<<4;
+ else
+ output[0x15] |= eeprom->cbus_function[3]<<4;
+
+ if(eeprom->cbus_function[4] > CBUS_CLK6)
+ output[0x16] = CBUS_SLEEP;
+ else
+ output[0x16] = eeprom->cbus_function[4];
+ break;
+ case TYPE_2232H:
+ output[0x00] = (eeprom->channel_a_type);
+ if ( eeprom->channel_a_driver == DRIVER_VCP)
+ output[0x00] |= DRIVER_VCP;
+ else
+ output[0x00] &= ~DRIVER_VCP;
+
+ output[0x01] = (eeprom->channel_b_type);
+ if ( eeprom->channel_b_driver == DRIVER_VCP)
+ output[0x01] |= DRIVER_VCP;
+ else
+ output[0x01] &= ~DRIVER_VCP;
+ if(eeprom->suspend_dbus7 == SUSPEND_DBUS7)
+ output[0x01] |= SUSPEND_DBUS7;
+ else
+ output[0x01] &= ~SUSPEND_DBUS7;
+
+ if (eeprom->suspend_pull_downs == 1)
+ output[0x0A] |= 0x4;
+ else
+ output[0x0A] &= ~0x4;
+
+ if(eeprom->group0_drive > DRIVE_16MA)
+ output[0x0c] |= DRIVE_16MA;
+ else
+ output[0x0c] |= eeprom->group0_drive;
+ if (eeprom->group0_schmitt == IS_SCHMITT)
+ output[0x0c] |= IS_SCHMITT;
+ if (eeprom->group0_slew == SLOW_SLEW)
+ output[0x0c] |= SLOW_SLEW;
+
+ if(eeprom->group1_drive > DRIVE_16MA)
+ output[0x0c] |= DRIVE_16MA<<4;
+ else
+ output[0x0c] |= eeprom->group1_drive<<4;
+ if (eeprom->group1_schmitt == IS_SCHMITT)
+ output[0x0c] |= IS_SCHMITT<<4;
+ if (eeprom->group1_slew == SLOW_SLEW)
+ output[0x0c] |= SLOW_SLEW<<4;
+
+ if(eeprom->group2_drive > DRIVE_16MA)
+ output[0x0d] |= DRIVE_16MA;
+ else
+ output[0x0d] |= eeprom->group2_drive;
+ if (eeprom->group2_schmitt == IS_SCHMITT)
+ output[0x0d] |= IS_SCHMITT;
+ if (eeprom->group2_slew == SLOW_SLEW)
+ output[0x0d] |= SLOW_SLEW;
+
+ if(eeprom->group3_drive > DRIVE_16MA)
+ output[0x0d] |= DRIVE_16MA<<4;
+ else
+ output[0x0d] |= eeprom->group3_drive<<4;
+ if (eeprom->group3_schmitt == IS_SCHMITT)
+ output[0x0d] |= IS_SCHMITT<<4;
+ if (eeprom->group3_slew == SLOW_SLEW)
+ output[0x0d] |= SLOW_SLEW<<4;
+
+ output[0x18] = eeprom->chip;
+
+ break;
+ case TYPE_4232H:
+ fprintf(stderr,"FIXME: Build FT4232H specific EEPROM settings\n");
}
// calculate checksum
/**
Decode binary EEPROM image into an ftdi_eeprom structure.
- \param eeprom Pointer to ftdi_eeprom which will be filled in.
- \param buf Buffer of \a size bytes of raw eeprom data
- \param size size size of eeprom data in bytes
-
+ \param ftdi pointer to ftdi_context
+ \param verbose Decode EEPROM on stdout
+
\retval 0: all fine
\retval -1: something went wrong
FIXME: How to pass size? How to handle size field in ftdi_eeprom?
FIXME: Strings are malloc'ed here and should be freed somewhere
*/
-int ftdi_eeprom_decode(struct ftdi_eeprom *eeprom, unsigned char *buf, int size)
+int ftdi_eeprom_decode(struct ftdi_context *ftdi, int verbose)
{
unsigned char i, j;
unsigned short checksum, eeprom_checksum, value;
unsigned char manufacturer_size = 0, product_size = 0, serial_size = 0;
- int eeprom_size = 128;
-#if 0
- size_check = eeprom->size;
- size_check -= 28; // 28 are always in use (fixed)
-
- // Top half of a 256byte eeprom is used just for strings and checksum
- // it seems that the FTDI chip will not read these strings from the lower half
- // Each string starts with two bytes; offset and type (0x03 for string)
- // the checksum needs two bytes, so without the string data that 8 bytes from the top half
- if (eeprom->size>=256)size_check = 120;
- size_check -= manufacturer_size*2;
- size_check -= product_size*2;
- size_check -= serial_size*2;
+ int eeprom_size;
+ struct ftdi_eeprom *eeprom;
+ unsigned char *buf = ftdi->eeprom->buf;
+ int release;
- // eeprom size exceeded?
- if (size_check < 0)
- return (-1);
-#endif
-
- // empty eeprom struct
- memset(eeprom, 0, sizeof(struct ftdi_eeprom));
-
- // Addr 00: Stay 00 00
+ if (ftdi == NULL)
+ ftdi_error_return(-1,"No context");
+ if (ftdi->eeprom == NULL)
+ ftdi_error_return(-1,"No eeprom structure");
+
+ eeprom = ftdi->eeprom;
+ eeprom_size = eeprom->size;
// Addr 02: Vendor ID
eeprom->vendor_id = buf[0x02] + (buf[0x03] << 8);
// Addr 04: Product ID
eeprom->product_id = buf[0x04] + (buf[0x05] << 8);
- value = buf[0x06] + (buf[0x07]<<8);
- switch (value)
- {
- case 0x0400:
- eeprom->BM_type_chip = 1;
- break;
- case 0x0200:
- eeprom->BM_type_chip = 0;
- break;
- default: // Unknown device
- eeprom->BM_type_chip = 0;
- break;
- }
+ release = buf[0x06] + (buf[0x07]<<8);
// Addr 08: Config descriptor
// Bit 7: always 1
// Bit 6: 1 if this device is self powered, 0 if bus powered
// Bit 5: 1 if this device uses remote wakeup
- // Bit 4: 1 if this device is battery powered
- j = buf[0x08];
- if (j&0x40) eeprom->self_powered = 1;
- if (j&0x20) eeprom->remote_wakeup = 1;
+ eeprom->self_powered = buf[0x08] & 0x40;
+ eeprom->remote_wakeup = buf[0x08] & 0x20;;
// Addr 09: Max power consumption: max power = value * 2 mA
eeprom->max_power = buf[0x09];
// Bit 6: 0 - reserved
// Bit 5: 0 - reserved
// Bit 4: 1 - Change USB version
+ // Not seen on FT2232(D)
// Bit 3: 1 - Use the serial number string
// Bit 2: 1 - Enable suspend pull downs for lower power
// Bit 1: 1 - Out EndPoint is Isochronous
// Bit 0: 1 - In EndPoint is Isochronous
//
- j = buf[0x0A];
- if (j&0x01) eeprom->in_is_isochronous = 1;
- if (j&0x02) eeprom->out_is_isochronous = 1;
- if (j&0x04) eeprom->suspend_pull_downs = 1;
- if (j&0x08) eeprom->use_serial = 1;
- if (j&0x10) eeprom->change_usb_version = 1;
+ eeprom->in_is_isochronous = buf[0x0A]&0x01;
+ eeprom->out_is_isochronous = buf[0x0A]&0x02;
+ eeprom->suspend_pull_downs = buf[0x0A]&0x04;
+ eeprom->use_serial = buf[0x0A] & USE_SERIAL_NUM;
+ if(buf[0x0A]&0x10)
+ fprintf(stderr,
+ "EEPROM byte[0x0a] Bit 4 unexpected set. If this happened with the EEPROM\n"
+ "programmed by FTDI tools, please report to libftdi@developer.intra2net.com\n");
- // Addr 0B: reserved
- // Addr 0C: USB version low byte when 0x0A bit 4 is set
- // Addr 0D: USB version high byte when 0x0A bit 4 is set
- if (eeprom->change_usb_version == 1)
- {
- eeprom->usb_version = buf[0x0C] + (buf[0x0D] << 8);
- }
+ // Addr 0C: USB version low byte when 0x0A
+ // Addr 0D: USB version high byte when 0x0A
+ eeprom->usb_version = buf[0x0C] + (buf[0x0D] << 8);
// Addr 0E: Offset of the manufacturer string + 0x80, calculated later
// Addr 0F: Length of manufacturer string
manufacturer_size = buf[0x0F]/2;
- if (manufacturer_size > 0) eeprom->manufacturer = malloc(manufacturer_size);
+ if(eeprom->manufacturer)
+ free(eeprom->manufacturer);
+ if (manufacturer_size > 0)
+ {
+ eeprom->manufacturer = malloc(manufacturer_size);
+ if (eeprom->manufacturer)
+ {
+ // Decode manufacturer
+ i = buf[0x0E] & (eeprom_size -1); // offset
+ for (j=0;j<manufacturer_size-1;j++)
+ {
+ eeprom->manufacturer[j] = buf[2*j+i+2];
+ }
+ eeprom->manufacturer[j] = '\0';
+ }
+ }
else eeprom->manufacturer = NULL;
// Addr 10: Offset of the product string + 0x80, calculated later
// Addr 11: Length of product string
+ if(eeprom->product)
+ free(eeprom->product);
product_size = buf[0x11]/2;
- if (product_size > 0) eeprom->product = malloc(product_size);
+ if (product_size > 0)
+ {
+ eeprom->product = malloc(product_size);
+ if(eeprom->product)
+ {
+ // Decode product name
+ i = buf[0x10] & (eeprom_size -1); // offset
+ for (j=0;j<product_size-1;j++)
+ {
+ eeprom->product[j] = buf[2*j+i+2];
+ }
+ eeprom->product[j] = '\0';
+ }
+ }
else eeprom->product = NULL;
// Addr 12: Offset of the serial string + 0x80, calculated later
// Addr 13: Length of serial string
+ if(eeprom->serial)
+ free(eeprom->serial);
serial_size = buf[0x13]/2;
- if (serial_size > 0) eeprom->serial = malloc(serial_size);
- else eeprom->serial = NULL;
-
- // Decode manufacturer
- i = buf[0x0E] & 0x7f; // offset
- for (j=0;j<manufacturer_size-1;j++)
+ if (serial_size > 0)
{
- eeprom->manufacturer[j] = buf[2*j+i+2];
- }
- eeprom->manufacturer[j] = '\0';
-
- // Decode product name
- i = buf[0x10] & 0x7f; // offset
- for (j=0;j<product_size-1;j++)
- {
- eeprom->product[j] = buf[2*j+i+2];
- }
- eeprom->product[j] = '\0';
-
- // Decode serial
- i = buf[0x12] & 0x7f; // offset
- for (j=0;j<serial_size-1;j++)
- {
- eeprom->serial[j] = buf[2*j+i+2];
+ eeprom->serial = malloc(serial_size);
+ if(eeprom->serial)
+ {
+ // Decode serial
+ i = buf[0x12] & (eeprom_size -1); // offset
+ for (j=0;j<serial_size-1;j++)
+ {
+ eeprom->serial[j] = buf[2*j+i+2];
+ }
+ eeprom->serial[j] = '\0';
+ }
}
- eeprom->serial[j] = '\0';
+ else eeprom->serial = NULL;
// verify checksum
checksum = 0xAAAA;
if (eeprom_checksum != checksum)
{
fprintf(stderr, "Checksum Error: %04x %04x\n", checksum, eeprom_checksum);
- return -1;
+ ftdi_error_return(-1,"EEPROM checksum error");
}
+ eeprom->channel_a_type = 0;
+ if ((ftdi->type == TYPE_AM) || (ftdi->type == TYPE_BM))
+ {
+ eeprom->chip = -1;
+ }
+ else if(ftdi->type == TYPE_2232C)
+ {
+ eeprom->channel_a_type = buf[0x00] & 0x7;
+ eeprom->channel_a_driver = buf[0x00] & DRIVER_VCP;
+ eeprom->high_current_a = buf[0x00] & HIGH_CURRENT_DRIVE;
+ eeprom->channel_b_type = buf[0x01] & 0x7;
+ eeprom->channel_b_driver = buf[0x01] & DRIVER_VCP;
+ eeprom->high_current_b = buf[0x01] & HIGH_CURRENT_DRIVE;
+ eeprom->chip = buf[0x14];
+ }
+ else if(ftdi->type == TYPE_R)
+ {
+ /* TYPE_R flags D2XX, not VCP as all others*/
+ eeprom->channel_a_driver = (~buf[0x00]) & DRIVER_VCP;
+ eeprom->high_current = buf[0x00] & HIGH_CURRENT_DRIVE_R;
+ if( (buf[0x01]&0x40) != 0x40)
+ fprintf(stderr,
+ "TYPE_R EEPROM byte[0x01] Bit 6 unexpected Endpoint size."
+ " If this happened with the\n"
+ " EEPROM programmed by FTDI tools, please report "
+ "to libftdi@developer.intra2net.com\n");
+
+ eeprom->chip = buf[0x16];
+ // Addr 0B: Invert data lines
+ // Works only on FT232R, not FT245R, but no way to distinguish
+ eeprom->invert = buf[0x0B];
+ // Addr 14: CBUS function: CBUS0, CBUS1
+ // Addr 15: CBUS function: CBUS2, CBUS3
+ // Addr 16: CBUS function: CBUS5
+ eeprom->cbus_function[0] = buf[0x14] & 0x0f;
+ eeprom->cbus_function[1] = (buf[0x14] >> 4) & 0x0f;
+ eeprom->cbus_function[2] = buf[0x15] & 0x0f;
+ eeprom->cbus_function[3] = (buf[0x15] >> 4) & 0x0f;
+ eeprom->cbus_function[4] = buf[0x16] & 0x0f;
+ }
+ else if ((ftdi->type == TYPE_2232H) ||(ftdi->type == TYPE_4232H))
+ {
+ eeprom->channel_a_type = buf[0x00] & 0x7;
+ eeprom->channel_a_driver = buf[0x00] & DRIVER_VCP;
+ eeprom->channel_b_type = buf[0x01] & 0x7;
+ eeprom->channel_b_driver = buf[0x01] & DRIVER_VCP;
+
+ if(ftdi->type == TYPE_2232H)
+ eeprom->suspend_dbus7 = buf[0x01] & SUSPEND_DBUS7;
+
+ eeprom->chip = buf[0x18];
+ eeprom->group0_drive = buf[0x0c] & DRIVE_16MA;
+ eeprom->group0_schmitt = buf[0x0c] & IS_SCHMITT;
+ eeprom->group0_slew = buf[0x0c] & SLOW_SLEW;
+ eeprom->group1_drive = (buf[0x0c] >> 4) & 0x3;
+ eeprom->group1_schmitt = (buf[0x0c] >> 4) & IS_SCHMITT;
+ eeprom->group1_slew = (buf[0x0c] >> 4) & SLOW_SLEW;
+ eeprom->group2_drive = buf[0x0d] & DRIVE_16MA;
+ eeprom->group2_schmitt = buf[0x0d] & IS_SCHMITT;
+ eeprom->group2_slew = buf[0x0d] & SLOW_SLEW;
+ eeprom->group3_drive = (buf[0x0d] >> 4) & DRIVE_16MA;
+ eeprom->group3_schmitt = (buf[0x0d] >> 4) & IS_SCHMITT;
+ eeprom->group3_slew = (buf[0x0d] >> 4) & SLOW_SLEW;
+ }
+
+ if(verbose)
+ {
+ char *channel_mode[] = {"UART","245","CPU", "unknown", "OPTO"};
+ fprintf(stdout, "VID: 0x%04x\n",eeprom->vendor_id);
+ fprintf(stdout, "PID: 0x%04x\n",eeprom->product_id);
+ fprintf(stdout, "Release: 0x%04x\n",release);
+
+ if(eeprom->self_powered)
+ fprintf(stdout, "Self-Powered%s", (eeprom->remote_wakeup)?", USB Remote Wake Up\n":"\n");
+ else
+ fprintf(stdout, "Bus Powered: %3d mA%s", eeprom->max_power * 2,
+ (eeprom->remote_wakeup)?" USB Remote Wake Up\n":"\n");
+ if(eeprom->manufacturer)
+ fprintf(stdout, "Manufacturer: %s\n",eeprom->manufacturer);
+ if(eeprom->product)
+ fprintf(stdout, "Product: %s\n",eeprom->product);
+ if(eeprom->serial)
+ fprintf(stdout, "Serial: %s\n",eeprom->serial);
+ fprintf(stdout, "Checksum : %04x\n", checksum);
+ if (ftdi->type == TYPE_R)
+ fprintf(stdout, "Internal EEPROM\n");
+ else if (eeprom->chip >= 0x46)
+ fprintf(stdout, "Attached EEPROM: 93x%02x\n", eeprom->chip);
+ if(eeprom->suspend_dbus7)
+ fprintf(stdout, "Suspend on DBUS7\n");
+ if(eeprom->suspend_pull_downs)
+ fprintf(stdout, "Pull IO pins low during suspend\n");
+ if(eeprom->remote_wakeup)
+ fprintf(stdout, "Enable Remote Wake Up\n");
+ fprintf(stdout, "PNP: %d\n",(eeprom->is_not_pnp)?0:1);
+ if (ftdi->type >= TYPE_2232C)
+ fprintf(stdout,"Channel A has Mode %s%s%s\n",
+ channel_mode[eeprom->channel_a_type],
+ (eeprom->channel_a_driver)?" VCP":"",
+ (eeprom->high_current_a)?" High Current IO":"");
+ if ((ftdi->type >= TYPE_2232C) && (ftdi->type != TYPE_R))
+ fprintf(stdout,"Channel B has Mode %s%s%s\n",
+ channel_mode[eeprom->channel_b_type],
+ (eeprom->channel_b_driver)?" VCP":"",
+ (eeprom->high_current_b)?" High Current IO":"");
+ if ((ftdi->type == TYPE_2232H) || (ftdi->type == TYPE_4232H))
+ {
+ fprintf(stdout,"%s has %d mA drive%s%s\n",
+ (ftdi->type == TYPE_2232H)?"AL":"A",
+ (eeprom->group0_drive+1) *4,
+ (eeprom->group0_schmitt)?" Schmitt Input":"",
+ (eeprom->group0_slew)?" Slow Slew":"");
+ fprintf(stdout,"%s has %d mA drive%s%s\n",
+ (ftdi->type == TYPE_2232H)?"AH":"B",
+ (eeprom->group1_drive+1) *4,
+ (eeprom->group1_schmitt)?" Schmitt Input":"",
+ (eeprom->group1_slew)?" Slow Slew":"");
+ fprintf(stdout,"%s has %d mA drive%s%s\n",
+ (ftdi->type == TYPE_2232H)?"BL":"C",
+ (eeprom->group2_drive+1) *4,
+ (eeprom->group2_schmitt)?" Schmitt Input":"",
+ (eeprom->group2_slew)?" Slow Slew":"");
+ fprintf(stdout,"%s has %d mA drive%s%s\n",
+ (ftdi->type == TYPE_2232H)?"BH":"D",
+ (eeprom->group3_drive+1) *4,
+ (eeprom->group3_schmitt)?" Schmitt Input":"",
+ (eeprom->group3_slew)?" Slow Slew":"");
+ }
+ if (ftdi->type == TYPE_R)
+ {
+ char *cbus_mux[] = {"TXDEN","PWREN","RXLED", "TXLED","TX+RXLED",
+ "SLEEP","CLK48","CLK24","CLK12","CLK6",
+ "IOMODE","BB_WR","BB_RD"};
+ char *cbus_BB[] = {"RXF","TXE","RD", "WR"};
+ int i;
+
+ if(eeprom->invert)
+ {
+ char *r_bits[] = {"TXD","RXD","RTS", "CTS","DTR","DSR","DCD","RI"};
+ fprintf(stdout,"Inverted bits:");
+ for (i=0; i<8; i++)
+ if((eeprom->invert & (1<<i)) == (1<<i))
+ fprintf(stdout," %s",r_bits[i]);
+ fprintf(stdout,"\n");
+ }
+ for(i=0; i<5; i++)
+ {
+ if(eeprom->cbus_function[i]<CBUS_BB)
+ fprintf(stdout,"C%d Function: %s\n", i,
+ cbus_mux[eeprom->cbus_function[i]]);
+ else
+ fprintf(stdout,"C%d BB Function: %s\n", i,
+ cbus_BB[i]);
+ }
+ }
+ }
return 0;
}
\retval 0: all fine
\retval -1: read failed
+ \retval -2: USB device unavailable
*/
int ftdi_read_eeprom_location (struct ftdi_context *ftdi, int eeprom_addr, unsigned short *eeprom_val)
{
- if (libusb_control_transfer(ftdi->usb_dev, FTDI_DEVICE_IN_REQTYPE, SIO_READ_EEPROM_REQUEST, 0, eeprom_addr, (char *)eeprom_val, 2, ftdi->usb_read_timeout) != 2)
+ if (ftdi == NULL || ftdi->usb_dev == NULL)
+ ftdi_error_return(-2, "USB device unavailable");
+
+ if (libusb_control_transfer(ftdi->usb_dev, FTDI_DEVICE_IN_REQTYPE, SIO_READ_EEPROM_REQUEST, 0, eeprom_addr, (unsigned char *)eeprom_val, 2, ftdi->usb_read_timeout) != 2)
ftdi_error_return(-1, "reading eeprom failed");
return 0;
Read eeprom
\param ftdi pointer to ftdi_context
- \param eeprom Pointer to store eeprom into
\retval 0: all fine
\retval -1: read failed
+ \retval -2: USB device unavailable
*/
-int ftdi_read_eeprom(struct ftdi_context *ftdi, unsigned char *eeprom)
+int ftdi_read_eeprom(struct ftdi_context *ftdi)
{
int i;
+ unsigned char *buf;
+
+ if (ftdi == NULL || ftdi->usb_dev == NULL)
+ ftdi_error_return(-2, "USB device unavailable");
+ buf = ftdi->eeprom->buf;
- for (i = 0; i < ftdi->eeprom_size/2; i++)
+ for (i = 0; i < FTDI_MAX_EEPROM_SIZE/2; i++)
{
- if (libusb_control_transfer(ftdi->usb_dev, FTDI_DEVICE_IN_REQTYPE, SIO_READ_EEPROM_REQUEST, 0, i, eeprom+(i*2), 2, ftdi->usb_read_timeout) != 2)
+ if (libusb_control_transfer(
+ ftdi->usb_dev, FTDI_DEVICE_IN_REQTYPE,SIO_READ_EEPROM_REQUEST, 0, i,
+ buf+(i*2), 2, ftdi->usb_read_timeout) != 2)
ftdi_error_return(-1, "reading eeprom failed");
}
+ if (ftdi->type == TYPE_R)
+ ftdi->eeprom->size = 0x80;
+ /* Guesses size of eeprom by comparing halves
+ - will not work with blank eeprom */
+ else if (strrchr((const char *)buf, 0xff) == ((const char *)buf +FTDI_MAX_EEPROM_SIZE -1))
+ ftdi->eeprom->size = -1;
+ else if(memcmp(buf,&buf[0x80],0x80) == 0)
+ ftdi->eeprom->size = 0x80;
+ else if(memcmp(buf,&buf[0x40],0x40) == 0)
+ ftdi->eeprom->size = 0x40;
+ else
+ ftdi->eeprom->size = 0x100;
return 0;
}
\retval 0: all fine
\retval -1: read failed
+ \retval -2: USB device unavailable
*/
int ftdi_read_chipid(struct ftdi_context *ftdi, unsigned int *chipid)
{
unsigned int a = 0, b = 0;
+ if (ftdi == NULL || ftdi->usb_dev == NULL)
+ ftdi_error_return(-2, "USB device unavailable");
+
if (libusb_control_transfer(ftdi->usb_dev, FTDI_DEVICE_IN_REQTYPE, SIO_READ_EEPROM_REQUEST, 0, 0x43, (unsigned char *)&a, 2, ftdi->usb_read_timeout) == 2)
{
a = a << 8 | a >> 8;
}
/**
- Guesses size of eeprom by reading eeprom and comparing halves - will not work with blank eeprom
- Call this function then do a write then call again to see if size changes, if so write again.
-
- \param ftdi pointer to ftdi_context
- \param eeprom Pointer to store eeprom into
- \param maxsize the size of the buffer to read into
-
- \retval size of eeprom
-*/
-int ftdi_read_eeprom_getsize(struct ftdi_context *ftdi, unsigned char *eeprom, int maxsize)
-{
- int i=0,j,minsize=32;
- int size=minsize;
-
- do
- {
- for (j = 0; i < maxsize/2 && j<size; j++)
- {
- if (libusb_control_transfer(ftdi->usb_dev, FTDI_DEVICE_IN_REQTYPE,
- SIO_READ_EEPROM_REQUEST, 0, i,
- eeprom+(i*2), 2, ftdi->usb_read_timeout) != 2)
- ftdi_error_return(-1, "reading eeprom failed");
- i++;
- }
- size*=2;
- }
- while (size<=maxsize && memcmp(eeprom,&eeprom[size/2],size/2)!=0);
-
- return size/2;
-}
-
-/**
Write eeprom location
\param ftdi pointer to ftdi_context
\param eeprom_val Value to be written
\retval 0: all fine
- \retval -1: read failed
+ \retval -1: write failed
+ \retval -2: USB device unavailable
+ \retval -3: Invalid access to checksum protected area below 0x80
+ \retval -4: Device can't access unprotected area
+ \retval -5: Reading chip type failed
*/
-int ftdi_write_eeprom_location(struct ftdi_context *ftdi, int eeprom_addr, unsigned short eeprom_val)
+int ftdi_write_eeprom_location(struct ftdi_context *ftdi, int eeprom_addr,
+ unsigned short eeprom_val)
{
+ int chip_type_location;
+ unsigned short chip_type;
+
+ if (ftdi == NULL || ftdi->usb_dev == NULL)
+ ftdi_error_return(-2, "USB device unavailable");
+
+ if(eeprom_addr <0x80)
+ ftdi_error_return(-2, "Invalid access to checksum protected area below 0x80");
+
+
+ switch (ftdi->type)
+ {
+ case TYPE_BM:
+ case TYPE_2232C:
+ chip_type_location = 0x14;
+ break;
+ case TYPE_2232H:
+ case TYPE_4232H:
+ chip_type_location = 0x18;
+ break;
+ default:
+ ftdi_error_return(-4, "Device can't access unprotected area");
+ }
+
+ if (ftdi_read_eeprom_location( ftdi, chip_type_location>>1, &chip_type))
+ ftdi_error_return(-5, "Reading failed failed");
+ fprintf(stderr," loc 0x%04x val 0x%04x\n", chip_type_location,chip_type);
+ if((chip_type & 0xff) != 0x66)
+ {
+ ftdi_error_return(-6, "EEPROM is not of 93x66");
+ }
+
if (libusb_control_transfer(ftdi->usb_dev, FTDI_DEVICE_OUT_REQTYPE,
SIO_WRITE_EEPROM_REQUEST, eeprom_val, eeprom_addr,
NULL, 0, ftdi->usb_write_timeout) != 0)
Write eeprom
\param ftdi pointer to ftdi_context
- \param eeprom Pointer to read eeprom from
-
+
\retval 0: all fine
\retval -1: read failed
+ \retval -2: USB device unavailable
*/
-int ftdi_write_eeprom(struct ftdi_context *ftdi, unsigned char *eeprom)
+int ftdi_write_eeprom(struct ftdi_context *ftdi)
{
unsigned short usb_val, status;
int i, ret;
+ unsigned char *eeprom;
+
+ if (ftdi == NULL || ftdi->usb_dev == NULL)
+ ftdi_error_return(-2, "USB device unavailable");
+ eeprom = ftdi->eeprom->buf;
/* These commands were traced while running MProg */
if ((ret = ftdi_usb_reset(ftdi)) != 0)
if ((ret = ftdi_set_latency_timer(ftdi, 0x77)) != 0)
return ret;
- for (i = 0; i < ftdi->eeprom_size/2; i++)
+ for (i = 0; i < ftdi->eeprom->size/2; i++)
{
usb_val = eeprom[i*2];
usb_val += eeprom[(i*2)+1] << 8;
\retval 0: all fine
\retval -1: erase failed
+ \retval -2: USB device unavailable
+ \retval -3: Writing magic failed
+ \retval -4: Read EEPROM failed
+ \retval -5: Unexpected EEPROM value
*/
+#define MAGIC 0x55aa
int ftdi_erase_eeprom(struct ftdi_context *ftdi)
{
- if (libusb_control_transfer(ftdi->usb_dev, FTDI_DEVICE_OUT_REQTYPE, SIO_ERASE_EEPROM_REQUEST, 0, 0, NULL, 0, ftdi->usb_write_timeout) < 0)
+ unsigned short eeprom_value;
+ if (ftdi == NULL || ftdi->usb_dev == NULL)
+ ftdi_error_return(-2, "USB device unavailable");
+
+ if(ftdi->type == TYPE_R)
+ {
+ ftdi->eeprom->chip = 0;
+ return 0;
+ }
+
+ if (libusb_control_transfer(ftdi->usb_dev, FTDI_DEVICE_OUT_REQTYPE, SIO_ERASE_EEPROM_REQUEST,
+ 0, 0, NULL, 0, ftdi->usb_write_timeout) < 0)
ftdi_error_return(-1, "unable to erase eeprom");
+
+ /* detect chip type by writing 0x55AA as magic at word position 0xc0
+ Chip is 93x46 if magic is read at word position 0x00, as wraparound happens around 0x40
+ Chip is 93x56 if magic is read at word position 0x40, as wraparound happens around 0x80
+ Chip is 93x66 if magic is only read at word position 0xc0*/
+ if (libusb_control_transfer(ftdi->usb_dev, FTDI_DEVICE_OUT_REQTYPE,
+ SIO_WRITE_EEPROM_REQUEST, MAGIC, 0xc0,
+ NULL, 0, ftdi->usb_write_timeout) != 0)
+ ftdi_error_return(-3, "Writing magic failed");
+ if (ftdi_read_eeprom_location( ftdi, 0x00, &eeprom_value))
+ ftdi_error_return(-4, "Reading failed failed");
+ if(eeprom_value == MAGIC)
+ {
+ ftdi->eeprom->chip = 0x46;
+ }
+ else
+ {
+ if (ftdi_read_eeprom_location( ftdi, 0x40, &eeprom_value))
+ ftdi_error_return(-4, "Reading failed failed");
+ if(eeprom_value == MAGIC)
+ ftdi->eeprom->chip = 0x56;
+ else
+ {
+ if (ftdi_read_eeprom_location( ftdi, 0xc0, &eeprom_value))
+ ftdi_error_return(-4, "Reading failed failed");
+ if(eeprom_value == MAGIC)
+ ftdi->eeprom->chip = 0x66;
+ else
+ {
+ ftdi->eeprom->chip = -1;
+ }
+ }
+ }
+ if (libusb_control_transfer(ftdi->usb_dev, FTDI_DEVICE_OUT_REQTYPE, SIO_ERASE_EEPROM_REQUEST,
+ 0, 0, NULL, 0, ftdi->usb_write_timeout) < 0)
+ ftdi_error_return(-1, "unable to erase eeprom");
return 0;
}
*/
char *ftdi_get_error_string (struct ftdi_context *ftdi)
{
+ if (ftdi == NULL)
+ return "";
+
return ftdi->error_str;
}
git://developer.intra2net.com / libftdi / blobdiff