\retval -9: get serial number failed
\retval -11: libusb_get_device_descriptor() failed
*/
-int ftdi_usb_get_strings(struct ftdi_context * ftdi, struct libusb_device * dev,
- char * manufacturer, int mnf_len, char * description, int desc_len, char * serial, int serial_len)
+int ftdi_usb_get_strings(struct ftdi_context *ftdi,
+ struct libusb_device *dev,
+ char *manufacturer, int mnf_len,
+ char *description, int desc_len,
+ char *serial, int serial_len)
{
- struct libusb_device_descriptor desc;
+ int ret;
if ((ftdi==NULL) || (dev==NULL))
return -1;
if (ftdi->usb_dev == NULL && libusb_open(dev, &ftdi->usb_dev) < 0)
- ftdi_error_return(-4, "libusb_open() failed");
+ ftdi_error_return(-4, "libusb_open() failed");
+
+ // ftdi->usb_dev will not be NULL when entering ftdi_usb_get_strings2(), so
+ // it won't be closed either. This allows us to close it whether we actually
+ // called libusb_open() up above or not. This matches the expected behavior
+ // (and note) for ftdi_usb_get_strings().
+ ret = ftdi_usb_get_strings2(ftdi, dev,
+ manufacturer, mnf_len,
+ description, desc_len,
+ serial, serial_len);
+
+ // only close it if it was successful, as all other return codes close
+ // before returning already.
+ if (ret == 0)
+ ftdi_usb_close_internal(ftdi);
+
+ return ret;
+}
+
+/**
+ Return device ID strings from the usb device.
+
+ The parameters manufacturer, description and serial may be NULL
+ or pointer to buffers to store the fetched strings.
+
+ \note The old function ftdi_usb_get_strings() always closes the device.
+ This version only closes the device if it was opened by it.
+
+ \param ftdi pointer to ftdi_context
+ \param dev libusb usb_dev to use
+ \param manufacturer Store manufacturer string here if not NULL
+ \param mnf_len Buffer size of manufacturer string
+ \param description Store product description string here if not NULL
+ \param desc_len Buffer size of product description string
+ \param serial Store serial string here if not NULL
+ \param serial_len Buffer size of serial string
+
+ \retval 0: all fine
+ \retval -1: wrong arguments
+ \retval -4: unable to open device
+ \retval -7: get product manufacturer failed
+ \retval -8: get product description failed
+ \retval -9: get serial number failed
+ \retval -11: libusb_get_device_descriptor() failed
+*/
+int ftdi_usb_get_strings2(struct ftdi_context *ftdi, struct libusb_device *dev,
+ char *manufacturer, int mnf_len,
+ char *description, int desc_len,
+ char *serial, int serial_len)
+{
+ struct libusb_device_descriptor desc;
+
+ if ((ftdi==NULL) || (dev==NULL))
+ return -1;
+
+ char need_open = (ftdi->usb_dev == NULL);
+ if (need_open && libusb_open(dev, &ftdi->usb_dev) < 0)
+ ftdi_error_return(-4, "libusb_open() failed");
if (libusb_get_device_descriptor(dev, &desc) < 0)
ftdi_error_return(-11, "libusb_get_device_descriptor() failed");
}
}
- ftdi_usb_close_internal (ftdi);
+ if (need_open)
+ ftdi_usb_close_internal (ftdi);
return 0;
}
}
}
}
- ret = libusb_submit_transfer (transfer);
- if (ret < 0)
- tc->completed = 1;
+
+ if (transfer->status == LIBUSB_TRANSFER_CANCELLED)
+ tc->completed = LIBUSB_TRANSFER_CANCELLED;
+ else
+ {
+ ret = libusb_submit_transfer (transfer);
+ if (ret < 0)
+ tc->completed = 1;
+ }
}
transfer->length = write_size;
transfer->buffer = tc->buf + tc->offset;
- ret = libusb_submit_transfer (transfer);
- if (ret < 0)
- tc->completed = 1;
+
+ if (transfer->status == LIBUSB_TRANSFER_CANCELLED)
+ tc->completed = LIBUSB_TRANSFER_CANCELLED;
+ else
+ {
+ ret = libusb_submit_transfer (transfer);
+ if (ret < 0)
+ tc->completed = 1;
+ }
}
}
int ftdi_transfer_data_done(struct ftdi_transfer_control *tc)
{
int ret;
-
+ struct timeval to = { 0, 0 };
while (!tc->completed)
{
- ret = libusb_handle_events(tc->ftdi->usb_ctx);
+ ret = libusb_handle_events_timeout_completed(tc->ftdi->usb_ctx,
+ &to, &tc->completed);
if (ret < 0)
{
if (ret == LIBUSB_ERROR_INTERRUPTED)
continue;
libusb_cancel_transfer(tc->transfer);
while (!tc->completed)
- if (libusb_handle_events(tc->ftdi->usb_ctx) < 0)
+ if (libusb_handle_events_timeout_completed(tc->ftdi->usb_ctx,
+ &to, &tc->completed) < 0)
break;
libusb_free_transfer(tc->transfer);
free (tc);
}
/**
+ Cancel transfer and wait for completion.
+
+ Use libusb 1.0 asynchronous API.
+
+ \param tc pointer to ftdi_transfer_control
+ \param to pointer to timeout value or NULL for infinite
+*/
+
+void ftdi_transfer_data_cancel(struct ftdi_transfer_control *tc,
+ struct timeval * to)
+{
+ struct timeval tv = { 0, 0 };
+
+ if (!tc->completed && tc->transfer != NULL)
+ {
+ if (to == NULL)
+ to = &tv;
+
+ libusb_cancel_transfer(tc->transfer);
+ while (!tc->completed)
+ {
+ if (libusb_handle_events_timeout_completed(tc->ftdi->usb_ctx, to, &tc->completed) < 0)
+ break;
+ }
+ }
+
+ if (tc->transfer)
+ libusb_free_transfer(tc->transfer);
+
+ free (tc);
+}
+
+/**
Configure write buffer chunk size.
Default is 4096.
unsigned char i, j, eeprom_size_mask;
unsigned short checksum, value;
unsigned char manufacturer_size = 0, product_size = 0, serial_size = 0;
- int user_area_size;
+ int user_area_size, free_start, free_end;
struct ftdi_eeprom *eeprom;
unsigned char * output;
{
case TYPE_AM:
case TYPE_BM:
+ case TYPE_R:
user_area_size = 96; // base size for strings (total of 48 characters)
break;
case TYPE_2232C:
user_area_size = 90; // two extra config bytes and 4 bytes PnP stuff
break;
- case TYPE_R:
- user_area_size = 96;
- break;
case TYPE_230X:
user_area_size = 88; // four extra config bytes + 4 bytes PnP stuff
break;
}
/* Wrap around 0x80 for 128 byte EEPROMS (Internale and 93x46) */
eeprom_size_mask = eeprom->size -1;
+ free_end = i & eeprom_size_mask;
// Addr 0E: Offset of the manufacturer string + 0x80, calculated later
// Addr 0F: Length of manufacturer string
case TYPE_BM:
output[0x0C] = eeprom->usb_version & 0xff;
output[0x0D] = (eeprom->usb_version>>8) & 0xff;
- if (eeprom->use_usb_version == USE_USB_VERSION_BIT)
+ if (eeprom->use_usb_version)
output[0x0A] |= USE_USB_VERSION_BIT;
else
output[0x0A] &= ~USE_USB_VERSION_BIT;
output[0x0A] |= 0x4;
else
output[0x0A] &= ~0x4;
- if (eeprom->use_usb_version == USE_USB_VERSION_BIT)
+ if (eeprom->use_usb_version)
output[0x0A] |= USE_USB_VERSION_BIT;
else
output[0x0A] &= ~USE_USB_VERSION_BIT;
case TYPE_R:
if (eeprom->high_current == HIGH_CURRENT_DRIVE_R)
output[0x00] |= HIGH_CURRENT_DRIVE_R;
+ if (eeprom->external_oscillator)
+ output[0x00] |= 0x02;
output[0x01] = 0x40; /* Hard coded Endpoint Size*/
if (eeprom->suspend_pull_downs)
break;
}
+ /* First address without use */
+ free_start = 0;
+ switch (ftdi->type)
+ {
+ case TYPE_230X:
+ free_start += 2;
+ case TYPE_232H:
+ free_start += 6;
+ case TYPE_2232H:
+ case TYPE_4232H:
+ free_start += 2;
+ case TYPE_R:
+ free_start += 2;
+ case TYPE_2232C:
+ free_start++;
+ case TYPE_AM:
+ case TYPE_BM:
+ free_start += 0x14;
+ }
+
+ /* Arbitrary user data */
+ if (eeprom->user_data && eeprom->user_data_size >= 0)
+ {
+ if (eeprom->user_data_addr < free_start)
+ fprintf(stderr,"Warning, user data starts inside the generated data!\n");
+ if (eeprom->user_data_addr + eeprom->user_data_size >= free_end)
+ fprintf(stderr,"Warning, user data overlaps the strings area!\n");
+ if (eeprom->user_data_addr + eeprom->user_data_size > eeprom->size)
+ ftdi_error_return(-1,"eeprom size exceeded");
+ memcpy(output + eeprom->user_data_addr, eeprom->user_data, eeprom->user_data_size);
+ }
+
// calculate checksum
checksum = 0xAAAA;
eeprom->in_is_isochronous = buf[0x0A]&0x01;
eeprom->out_is_isochronous = buf[0x0A]&0x02;
eeprom->suspend_pull_downs = buf[0x0A]&0x04;
- eeprom->use_serial = (buf[0x0A] & USE_SERIAL_NUM)?1:0;
- eeprom->use_usb_version = buf[0x0A] & USE_USB_VERSION_BIT;
+ eeprom->use_serial = !!(buf[0x0A] & USE_SERIAL_NUM);
+ eeprom->use_usb_version = !!(buf[0x0A] & USE_USB_VERSION_BIT);
// Addr 0C: USB version low byte when 0x0A
// Addr 0D: USB version high byte when 0x0A
/* TYPE_R flags D2XX, not VCP as all others*/
eeprom->channel_a_driver = ~buf[0x00] & DRIVER_VCP;
eeprom->high_current = buf[0x00] & HIGH_CURRENT_DRIVE_R;
+ eeprom->external_oscillator = buf[0x00] & 0x02;
if ( (buf[0x01]&0x40) != 0x40)
fprintf(stderr,
"TYPE_R EEPROM byte[0x01] Bit 6 unexpected Endpoint size."
if (eeprom->serial)
fprintf(stdout, "Serial: %s\n",eeprom->serial);
fprintf(stdout, "Checksum : %04x\n", checksum);
- if (ftdi->type == TYPE_R)
+ if (ftdi->type == TYPE_R) {
fprintf(stdout, "Internal EEPROM\n");
+ fprintf(stdout,"Oscillator: %s\n", eeprom->external_oscillator?"External":"Internal");
+ }
else if (eeprom->chip >= 0x46)
fprintf(stdout, "Attached EEPROM: 93x%02x\n", eeprom->chip);
if (eeprom->suspend_dbus7)
(eeprom->channel_b_driver)?" VCP":"",
(eeprom->high_current_b)?" High Current IO":"");
if (((ftdi->type == TYPE_BM) || (ftdi->type == TYPE_2232C)) &&
- eeprom->use_usb_version == USE_USB_VERSION_BIT)
+ eeprom->use_usb_version)
fprintf(stdout,"Use explicit USB Version %04x\n",eeprom->usb_version);
if ((ftdi->type == TYPE_2232H) || (ftdi->type == TYPE_4232H))
*value = ftdi->eeprom->cbus_function[8];
break;
case CBUS_FUNCTION_9:
- *value = ftdi->eeprom->cbus_function[8];
+ *value = ftdi->eeprom->cbus_function[9];
break;
case HIGH_CURRENT:
*value = ftdi->eeprom->high_current;
case CHIP_SIZE:
*value = ftdi->eeprom->size;
break;
+ case EXTERNAL_OSCILLATOR:
+ *value = ftdi->eeprom->external_oscillator;
+ break;
default:
ftdi_error_return(-1, "Request for unknown EEPROM value");
}
case CHIP_SIZE:
ftdi_error_return(-2, "EEPROM Value can't be changed");
break;
+ case EXTERNAL_OSCILLATOR:
+ ftdi->eeprom->external_oscillator = value;
+ break;
+ case USER_DATA_ADDR:
+ ftdi->eeprom->user_data_addr = value;
+ break;
default :
ftdi_error_return(-1, "Request to unknown EEPROM value");
\param size Size of buffer
\retval 0: All fine
- \retval -1: struct ftdi_contxt or ftdi_eeprom of buf missing
+ \retval -1: struct ftdi_context or ftdi_eeprom or buf missing
*/
int ftdi_set_eeprom_buf(struct ftdi_context *ftdi, const unsigned char * buf, int size)
{
return 0;
}
+/** Set the EEPROM user data content from the user-supplied prefilled buffer
+
+ \param ftdi pointer to ftdi_context
+ \param buf buffer to read EEPROM user data content
+ \param size Size of buffer
+
+ \retval 0: All fine
+ \retval -1: struct ftdi_context or ftdi_eeprom or buf missing
+*/
+int ftdi_set_eeprom_user_data(struct ftdi_context *ftdi, const char * buf, int size)
+{
+ if (!ftdi || !(ftdi->eeprom) || !buf)
+ ftdi_error_return(-1, "No appropriate structure");
+
+ ftdi->eeprom->user_data_size = size;
+ ftdi->eeprom->user_data = buf;
+ return 0;
+}
+
/**
Read eeprom location