#include <usb.h>
#include <string.h>
#include <errno.h>
+#include <sys/ioctl.h>
#include "ftdi.h"
ftdi->type = TYPE_2232C;
if (!ftdi->index)
ftdi->index = INTERFACE_A;
- }
+ } else if (dev->descriptor.bcdDevice == 0x600)
+ ftdi->type = TYPE_R;
ftdi_error_return(0, "all fine");
}
return total_written;
}
+/* these structs are stolen from libusb linux implementation
+ they are needed to directly access usbfs and offer async
+ writing */
+
+struct usb_iso_packet_desc {
+ unsigned int length;
+ unsigned int actual_length;
+ unsigned int status;
+};
+
+struct usb_urb {
+ unsigned char type;
+ unsigned char endpoint;
+ int status;
+ unsigned int flags;
+ void *buffer;
+ int buffer_length;
+ int actual_length;
+ int start_frame;
+ int number_of_packets;
+ int error_count;
+ unsigned int signr; /* signal to be sent on error, -1 if none should be sent */
+ void *usercontext;
+ struct usb_iso_packet_desc iso_frame_desc[0];
+};
+
+/* this is strongly dependent on libusb using the same struct layout. If libusb
+ changes in some later version this may break horribly (this is for libusb 0.1.12) */
+struct usb_dev_handle {
+ int fd;
+ // some other stuff coming here we don't need
+};
+
+// some defines for direct usb access, taken from libusb
+#define MAX_READ_WRITE (16 * 1024)
+#define IOCTL_USB_SUBMITURB _IOR('U', 10, struct usb_urb)
+#define USB_URB_TYPE_BULK 3
+
+/**
+ Stupid libusb does not offer async writes nor does it allow
+ access to its fd - so we need some hacks here.
+*/
+static int usb_bulk_write_async(usb_dev_handle *dev, int ep, char *bytes, int size)
+{
+ struct usb_urb urb;
+ int bytesdone = 0, requested;
+ struct usb_urb *context;
+ int ret, waiting;
+
+ do {
+ fd_set writefds;
+
+ requested = size - bytesdone;
+ if (requested > MAX_READ_WRITE)
+ requested = MAX_READ_WRITE;
+
+ urb.type = USB_URB_TYPE_BULK;
+ urb.endpoint = ep;
+ urb.flags = 0;
+ urb.buffer = bytes + bytesdone;
+ urb.buffer_length = requested;
+ urb.signr = 0;
+ urb.actual_length = 0;
+ urb.number_of_packets = 0; /* don't do isochronous yet */
+ urb.usercontext = (void*)1000; /* use something else than libusb... */
+
+ ret = ioctl(dev->fd, IOCTL_USB_SUBMITURB, &urb);
+ if (ret < 0)
+ return ret; /* the caller can read errno to get more info */
+
+ bytesdone += requested;
+ } while (bytesdone < size);
+ return bytesdone;
+}
+
+/**
+ Writes data in chunks (see ftdi_write_data_set_chunksize()) to the chip.
+ Does not wait for completion of the transfer nor does it make sure that
+ the transfer was successful.
+
+ This function could be extended to use signals and callbacks to inform the
+ caller of completion or error - but this is not done yet, volunteers welcome.
+
+ Works around libusb and directly accesses functions only available on Linux.
+
+ \param ftdi pointer to ftdi_context
+ \param buf Buffer with the data
+ \param size Size of the buffer
+
+ \retval <0: error code from usb_bulk_write()
+ \retval >0: number of bytes written
+*/
+int ftdi_write_data_async(struct ftdi_context *ftdi, unsigned char *buf, int size)
+{
+ int ret;
+ int offset = 0;
+ int total_written = 0;
+
+ while (offset < size) {
+ int write_size = ftdi->writebuffer_chunksize;
+
+ if (offset+write_size > size)
+ write_size = size-offset;
+
+ ret = usb_bulk_write_async(ftdi->usb_dev, ftdi->in_ep, buf+offset, write_size);
+ if (ret < 0)
+ ftdi_error_return(ret, "usb bulk write async failed");
+
+ total_written += ret;
+ offset += write_size;
+ }
+
+ return total_written;
+}
+
+
/**
Configure write buffer chunk size.
Default is 4096.
\param size Size of the buffer
\retval <0: error code from usb_bulk_read()
+ \retval 0: no data was available
\retval >0: number of bytes read
\remark This function is not useful in bitbang mode.
return 0;
}
+/*
+ ftdi_read_chipid_shift does the bitshift operation needed for the FTDIChip-ID
+ Function is only used internally
+ \internal
+*/
+static unsigned char ftdi_read_chipid_shift(unsigned char value)
+{
+ return ((value & 1) << 1) |
+ ((value & 2) << 5) |
+ ((value & 4) >> 2) |
+ ((value & 8) << 4) |
+ ((value & 16) >> 1) |
+ ((value & 32) >> 1) |
+ ((value & 64) >> 4) |
+ ((value & 128) >> 2);
+}
+
+/**
+ Read the FTDIChip-ID from R-type devices
+
+ \param ftdi pointer to ftdi_context
+ \param chipid Pointer to store FTDIChip-ID
+
+ \retval 0: all fine
+ \retval -1: read failed
+*/
+int ftdi_read_chipid(struct ftdi_context *ftdi, unsigned int *chipid)
+{
+ unsigned int a = 0, b = 0;
+
+ if (usb_control_msg(ftdi->usb_dev, 0xC0, 0x90, 0, 0x43, (char *)&a, 2, ftdi->usb_read_timeout) == 2)
+ {
+ a = a << 8 | a >> 8;
+ if (usb_control_msg(ftdi->usb_dev, 0xC0, 0x90, 0, 0x44, (char *)&b, 2, ftdi->usb_read_timeout) == 2)
+ {
+ b = b << 8 | b >> 8;
+ a = (a << 16) | b;
+ a = ftdi_read_chipid_shift(a) | ftdi_read_chipid_shift(a>>8)<<8
+ | ftdi_read_chipid_shift(a>>16)<<16 | ftdi_read_chipid_shift(a>>24)<<24;
+ *chipid = a ^ 0xa5f0f7d1;
+ return 0;
+ }
+ }
+
+ ftdi_error_return(-1, "read of FTDIChip-ID failed");
+}
+
/**
Write eeprom