Finds all ftdi devices with given VID:PID on the usb bus. Creates a new
ftdi_device_list which needs to be deallocated by ftdi_list_free() after
use. With VID:PID 0:0, search for the default devices
- (0x403:0x6001, 0x403:0x6010, 0x403:0x6011, 0x403:0x6014)
+ (0x403:0x6001, 0x403:0x6010, 0x403:0x6011, 0x403:0x6014)
\param ftdi pointer to ftdi_context
\param devlist Pointer where to store list of found devices
if (libusb_get_device_descriptor(dev, &desc) < 0)
ftdi_error_return_free_device_list(-6, "libusb_get_device_descriptor() failed", devs);
- if (((vendor != 0 && product != 0) &&
- desc.idVendor == vendor && desc.idProduct == product) ||
- ((vendor == 0 && product == 0) &&
- (desc.idVendor == 0x403) && (desc.idProduct == 0x6001 || desc.idProduct == 0x6010
- || desc.idProduct == 0x6011 || desc.idProduct == 0x6014)))
+ if (((vendor != 0 && product != 0) &&
+ desc.idVendor == vendor && desc.idProduct == product) ||
+ ((vendor == 0 && product == 0) &&
+ (desc.idVendor == 0x403) && (desc.idProduct == 0x6001 || desc.idProduct == 0x6010
+ || desc.idProduct == 0x6011 || desc.idProduct == 0x6014)))
{
*curdev = (struct ftdi_device_list*)malloc(sizeof(struct ftdi_device_list));
if (!*curdev)
// Determine maximum packet size. Init with default value.
// New hi-speed devices from FTDI use a packet size of 512 bytes
// but could be connected to a normal speed USB hub -> 64 bytes packet size.
- if (ftdi->type == TYPE_2232H || ftdi->type == TYPE_4232H || ftdi->type == TYPE_232H )
+ if (ftdi->type == TYPE_2232H || ftdi->type == TYPE_4232H || ftdi->type == TYPE_232H || ftdi->type == TYPE_230X)
packet_size = 512;
else
packet_size = 64;
ftdi->type = TYPE_4232H;
else if (desc.bcdDevice == 0x900)
ftdi->type = TYPE_232H;
+ else if (desc.bcdDevice == 0x1000)
+ ftdi->type = TYPE_230X;
// Determine maximum packet size
ftdi->max_packet_size = _ftdi_determine_max_packet_size(ftdi, dev);
return rtn;
}
-/* ftdi_to_clkbits_AM For the AM device, convert a requested baudrate
+/* ftdi_to_clkbits_AM For the AM device, convert a requested baudrate
to encoded divisor and the achievable baudrate
Function is only used internally
\internal
H Type have all features above with
{index[8],value[15:14]} is the encoded subdivisor
- FT232R, FT2232 and FT232BM have no option for 12 MHz and with
+ FT232R, FT2232 and FT232BM have no option for 12 MHz and with
{index[0],value[15:14]} is the encoded subdivisor
AM Type chips have only four fractional subdivisors at value[15:14]
*encoded_divisor = (best_divisor >> 3) | (frac_code[best_divisor & 0x7] << 14);
}
return best_baud;
-}
+}
/**
ftdi_convert_baudrate returns nearest supported baud rate to that requested.
Function is only used internally
#define H_CLK 120000000
#define C_CLK 48000000
- if ((ftdi->type == TYPE_2232H) || (ftdi->type == TYPE_4232H) || (ftdi->type == TYPE_232H ))
+ if ((ftdi->type == TYPE_2232H) || (ftdi->type == TYPE_4232H) || (ftdi->type == TYPE_232H) || (ftdi->type == TYPE_230X))
{
if(baudrate*10 > H_CLK /0x3fff)
{
/* On H Devices, use 12 000 000 Baudrate when possible
- We have a 14 bit divisor, a 1 bit divisor switch (10 or 16)
+ We have a 14 bit divisor, a 1 bit divisor switch (10 or 16)
three fractional bits and a 120 MHz clock
Assume AN_120 "Sub-integer divisors between 0 and 2 are not allowed" holds for
DIV/10 CLK too, so /1, /1.5 and /2 can be handled the same*/
}
// Split into "value" and "index" values
*value = (unsigned short)(encoded_divisor & 0xFFFF);
- if (ftdi->type == TYPE_2232H ||
- ftdi->type == TYPE_4232H || ftdi->type == TYPE_232H )
+ if (ftdi->type == TYPE_2232H || ftdi->type == TYPE_4232H || ftdi->type == TYPE_232H || ftdi->type == TYPE_230X)
{
*index = (unsigned short)(encoded_divisor >> 8);
*index &= 0xFF00;
* Do not use, it's only for the unit test framework
**/
int convert_baudrate_UT_export(int baudrate, struct ftdi_context *ftdi,
- unsigned short *value, unsigned short *index)
+ unsigned short *value, unsigned short *index)
{
return ftdi_convert_baudrate(baudrate, ftdi, value, index);
}
tc->size = size;
tc->offset = 0;
- if (size < ftdi->writebuffer_chunksize)
+ if (size < (int)ftdi->writebuffer_chunksize)
write_size = size;
else
write_size = ftdi->writebuffer_chunksize;
tc->buf = buf;
tc->size = size;
- if (size <= ftdi->readbuffer_remaining)
+ if (size <= (int)ftdi->readbuffer_remaining)
{
memcpy (buf, ftdi->readbuffer+ftdi->readbuffer_offset, size);
ftdi_error_return(-1, "max_packet_size is bogus (zero)");
// everything we want is still in the readbuffer?
- if (size <= ftdi->readbuffer_remaining)
+ if (size <= (int)ftdi->readbuffer_remaining)
{
memcpy (buf, ftdi->readbuffer+ftdi->readbuffer_offset, size);
eeprom->product_id = 0x6011;
else if (ftdi->type == TYPE_232H)
eeprom->product_id = 0x6014;
+ else if (ftdi->type == TYPE_230X)
+ eeprom->product_id = 0x6015;
else
eeprom->product_id = 0x6010;
+
if (ftdi->type == TYPE_AM)
eeprom->usb_version = 0x0101;
else
const char* default_product;
switch(ftdi->type)
{
- case TYPE_AM: default_product = "AM"; break;
- case TYPE_BM: default_product = "BM"; break;
- case TYPE_2232C: default_product = "Dual RS232"; break;
- case TYPE_R: default_product = "FT232R USB UART"; break;
- case TYPE_2232H: default_product = "Dual RS232-HS"; break;
- case TYPE_4232H: default_product = "FT4232H"; break;
- case TYPE_232H: default_product = "Single-RS232-HS"; break;
- default:
- ftdi_error_return(-3, "Unknown chip type");
+ case TYPE_AM: default_product = "AM"; break;
+ case TYPE_BM: default_product = "BM"; break;
+ case TYPE_2232C: default_product = "Dual RS232"; break;
+ case TYPE_R: default_product = "FT232R USB UART"; break;
+ case TYPE_2232H: default_product = "Dual RS232-HS"; break;
+ case TYPE_4232H: default_product = "FT4232H"; break;
+ case TYPE_232H: default_product = "Single-RS232-HS"; break;
+ case TYPE_230X: default_product = "FT230X Basic UART"; break;
+ default:
+ ftdi_error_return(-3, "Unknown chip type");
}
eeprom->product = malloc(strlen(default_product) +1);
if (eeprom->product)
eeprom->cbus_function[3] = CBUS_PWREN;
eeprom->cbus_function[4] = CBUS_SLEEP;
}
+ else if (ftdi->type == TYPE_230X)
+ {
+ eeprom->max_power = 90;
+ eeprom->size = 0x100;
+ eeprom->cbus_function[0] = CBUSH_TXDEN;
+ eeprom->cbus_function[1] = CBUSH_RXLED;
+ eeprom->cbus_function[2] = CBUSH_TXLED;
+ eeprom->cbus_function[3] = CBUSH_SLEEP;
+ }
else
{
if(ftdi->type == TYPE_232H)
case TYPE_232H:
eeprom->release_number = 0x0900;
break;
+ case TYPE_230X:
+ eeprom->release_number = 0x1000;
+ break;
default:
eeprom->release_number = 0x00;
}
return 0;
}
+
+int ftdi_eeprom_set_strings(struct ftdi_context *ftdi, char * manufacturer,
+ char * product, char * serial)
+{
+ struct ftdi_eeprom *eeprom;
+
+ if (ftdi == NULL)
+ ftdi_error_return(-1, "No struct ftdi_context");
+
+ if (ftdi->eeprom == NULL)
+ ftdi_error_return(-2,"No struct ftdi_eeprom");
+
+ eeprom = ftdi->eeprom;
+
+ if (ftdi->usb_dev == NULL)
+ ftdi_error_return(-3, "No connected device or device not yet opened");
+
+ if (manufacturer)
+ {
+ if (eeprom->manufacturer)
+ free (eeprom->manufacturer);
+ eeprom->manufacturer = malloc(strlen(manufacturer)+1);
+ if (eeprom->manufacturer)
+ strcpy(eeprom->manufacturer, manufacturer);
+ }
+
+ if(product)
+ {
+ if (eeprom->product)
+ free (eeprom->product);
+ eeprom->product = malloc(strlen(product)+1);
+ if (eeprom->product)
+ strcpy(eeprom->product, product);
+ }
+
+ if (serial)
+ {
+ if (eeprom->serial)
+ free (eeprom->serial);
+ eeprom->serial = malloc(strlen(serial)+1);
+ if (eeprom->serial)
+ {
+ strcpy(eeprom->serial, serial);
+ eeprom->use_serial = 1;
+ }
+ }
+ return 0;
+}
+
+
/*FTD2XX doesn't check for values not fitting in the ACBUS Signal oprtions*/
void set_ft232h_cbus(struct ftdi_eeprom *eeprom, unsigned char * output)
{
int i;
- for(i=0; i<5;i++)
+ for(i=0; i<5; i++)
{
int mode_low, mode_high;
if (eeprom->cbus_function[2*i]> CBUSH_CLK7_5)
{
switch (chip)
{
- case TYPE_2232H:
- case TYPE_2232C:
- {
- switch (type)
+ case TYPE_2232H:
+ case TYPE_2232C:
{
- case CHANNEL_IS_UART: return 0;
- case CHANNEL_IS_FIFO: return 0x01;
- case CHANNEL_IS_OPTO: return 0x02;
- case CHANNEL_IS_CPU : return 0x04;
- default: return 0;
+ switch (type)
+ {
+ case CHANNEL_IS_UART: return 0;
+ case CHANNEL_IS_FIFO: return 0x01;
+ case CHANNEL_IS_OPTO: return 0x02;
+ case CHANNEL_IS_CPU : return 0x04;
+ default: return 0;
+ }
}
- }
- case TYPE_232H:
- {
- switch (type)
+ case TYPE_232H:
{
- case CHANNEL_IS_UART : return 0;
- case CHANNEL_IS_FIFO : return 0x01;
- case CHANNEL_IS_OPTO : return 0x02;
- case CHANNEL_IS_CPU : return 0x04;
- case CHANNEL_IS_FT1284 : return 0x08;
- default: return 0;
+ switch (type)
+ {
+ case CHANNEL_IS_UART : return 0;
+ case CHANNEL_IS_FIFO : return 0x01;
+ case CHANNEL_IS_OPTO : return 0x02;
+ case CHANNEL_IS_CPU : return 0x04;
+ case CHANNEL_IS_FT1284 : return 0x08;
+ default: return 0;
+ }
}
- }
- default: return 0;
+ case TYPE_230X: /* FT230X is only UART */
+ default: return 0;
}
return 0;
-}
+}
/**
Build binary buffer from ftdi_eeprom structure.
if (eeprom->chip == -1)
ftdi_error_return(-6,"No connected EEPROM or EEPROM type unknown");
- if ((eeprom->chip == 0x56) || (eeprom->chip == 0x66))
- eeprom->size = 0x100;
- else
- eeprom->size = 0x80;
+ if (eeprom->size == -1)
+ {
+ if ((eeprom->chip == 0x56) || (eeprom->chip == 0x66))
+ eeprom->size = 0x100;
+ else
+ eeprom->size = 0x80;
+ }
if (eeprom->manufacturer != NULL)
manufacturer_size = strlen(eeprom->manufacturer);
user_area_size = 90; // two extra config bytes and 4 bytes PnP stuff
break;
case TYPE_R:
+ case TYPE_230X:
user_area_size = 88; // four extra config bytes + 4 bytes PnP stuff
break;
case TYPE_2232H: // six extra config bytes + 4 bytes PnP stuff
ftdi_error_return(-1,"eeprom size exceeded");
// empty eeprom
- memset (ftdi->eeprom->buf, 0, FTDI_MAX_EEPROM_SIZE);
+ if (ftdi->type == TYPE_230X)
+ {
+ /* FT230X have a reserved section in the middle of the MTP,
+ which cannot be written to, but must be included in the checksum */
+ memset(ftdi->eeprom->buf, 0, 0x80);
+ memset((ftdi->eeprom->buf + 0xa0), 0, (FTDI_MAX_EEPROM_SIZE - 0xa0));
+ }
+ else
+ {
+ memset(ftdi->eeprom->buf, 0, FTDI_MAX_EEPROM_SIZE);
+ }
// Bytes and Bits set for all Types
// Addr 09: Max power consumption: max power = value * 2 mA
output[0x09] = eeprom->max_power / MAX_POWER_MILLIAMP_PER_UNIT;
- if (ftdi->type != TYPE_AM)
+ if ((ftdi->type != TYPE_AM) && (ftdi->type != TYPE_230X))
{
// Addr 0A: Chip configuration
// Bit 7: 0 - reserved
case TYPE_AM:
case TYPE_BM:
i += 0x94;
+ break;
+ case TYPE_230X:
+ i = 0xa0;
+ break;
}
/* Wrap around 0x80 for 128 byte EEPROMS (Internale and 93x46) */
eeprom_size_mask = eeprom->size -1;
output[0x1e] = eeprom->chip;
fprintf(stderr,"FIXME: Build FT232H specific EEPROM settings\n");
break;
-
+ case TYPE_230X:
+ output[0x00] = 0x80; /* Actually, leave the default value */
+ output[0x0a] = 0x08; /* Enable USB Serial Number */
+ output[0x0c] = (0x01) | (0x3 << 4); /* DBUS drive 4mA, CBUS drive 16mA */
+ for (j = 0; j <= 6; j++)
+ {
+ output[0x1a + j] = eeprom->cbus_function[j];
+ }
+ break;
}
// calculate checksum
for (i = 0; i < eeprom->size/2-1; i++)
{
+ if ((ftdi->type == TYPE_230X) && (i == 0x12))
+ {
+ /* FT230X has a user section in the MTP which is not part of the checksum */
+ i = 0x40;
+ }
value = output[i*2];
value += output[(i*2)+1] << 8;
eeprom->initialized_for_connected_device = 1;
return user_area_size;
}
-/* Decode the encoded EEPROM field for the FTDI Mode into a value for the abstracted
+/* Decode the encoded EEPROM field for the FTDI Mode into a value for the abstracted
* EEPROM structure
*
* FTD2XX doesn't allow to set multiple bits in the interface mode bitfield, and so do we
{
switch (bits)
{
- case 0: return CHANNEL_IS_UART;
- case 1: return CHANNEL_IS_FIFO;
- case 2: return CHANNEL_IS_OPTO;
- case 4: return CHANNEL_IS_CPU;
- case 8: return CHANNEL_IS_FT1284;
- default:
- fprintf(stderr," Unexpected value %d for Hardware Interface type\n",
- bits);
+ case 0: return CHANNEL_IS_UART;
+ case 1: return CHANNEL_IS_FIFO;
+ case 2: return CHANNEL_IS_OPTO;
+ case 4: return CHANNEL_IS_CPU;
+ case 8: return CHANNEL_IS_FT1284;
+ default:
+ fprintf(stderr," Unexpected value %d for Hardware Interface type\n",
+ bits);
}
return 0;
}
{
// Decode manufacturer
i = buf[0x0E] & (eeprom_size -1); // offset
- for (j=0;j<manufacturer_size-1;j++)
+ for (j=0; j<manufacturer_size-1; j++)
{
eeprom->manufacturer[j] = buf[2*j+i+2];
}
{
// Decode product name
i = buf[0x10] & (eeprom_size -1); // offset
- for (j=0;j<product_size-1;j++)
+ for (j=0; j<product_size-1; j++)
{
eeprom->product[j] = buf[2*j+i+2];
}
{
// Decode serial
i = buf[0x12] & (eeprom_size -1); // offset
- for (j=0;j<serial_size-1;j++)
+ for (j=0; j<serial_size-1; j++)
{
eeprom->serial[j] = buf[2*j+i+2];
}
for (i = 0; i < eeprom_size/2-1; i++)
{
+ if ((ftdi->type == TYPE_230X) && (i == 0x12))
+ {
+ /* FT230X has a user section in the MTP which is not part of the checksum */
+ i = 0x40;
+ }
value = buf[i*2];
value += buf[(i*2)+1] << 8;
eeprom->chip = buf[0x1e];
/*FIXME: Decipher more values*/
}
+ else if (ftdi->type == TYPE_230X)
+ {
+ for(i=0; i<4; i++)
+ {
+ eeprom->cbus_function[i] = buf[0x1a + i] & 0xFF;
+ }
+ eeprom->group0_drive = buf[0x0c] & 0x03;
+ eeprom->group0_schmitt = buf[0x0c] & IS_SCHMITT;
+ eeprom->group0_slew = buf[0x0c] & SLOW_SLEW;
+ eeprom->group1_drive = (buf[0x0c] >> 4) & 0x03;
+ eeprom->group1_schmitt = (buf[0x0c] >> 4) & IS_SCHMITT;
+ eeprom->group1_slew = (buf[0x0c] >> 4) & SLOW_SLEW;
+ }
if (verbose)
{
{
if(ftdi->type >= TYPE_232H)
fprintf(stdout,"Enter low power state on ACBUS7\n");
- }
+ }
if (eeprom->remote_wakeup)
fprintf(stdout, "Enable Remote Wake Up\n");
fprintf(stdout, "PNP: %d\n",(eeprom->is_not_pnp)?0:1);
(eeprom->clock_polarity)?"HIGH":"LOW",
(eeprom->data_order)?"LSB":"MSB",
(eeprom->flow_control)?"":"No ");
- }
+ }
if ((ftdi->type >= TYPE_2232C) && (ftdi->type != TYPE_R) && (ftdi->type != TYPE_232H))
fprintf(stdout,"Channel B has Mode %s%s%s\n",
channel_mode[eeprom->channel_b_type],
{
int i;
char *cbush_mux[] = {"TRISTATE","RXLED","TXLED", "TXRXLED","PWREN",
- "SLEEP","DRIVE_0","DRIVE_1","IOMODE","TXDEN",
- "CLK30","CLK15","CLK7_5"
- };
+ "SLEEP","DRIVE_0","DRIVE_1","IOMODE","TXDEN",
+ "CLK30","CLK15","CLK7_5"
+ };
fprintf(stdout,"ACBUS has %d mA drive%s%s\n",
(eeprom->group0_drive+1) *4,
(eeprom->group0_schmitt)?" Schmitt Input":"",
cbush_mux[eeprom->cbus_function[i]]);
}
}
+ else if (ftdi->type == TYPE_230X)
+ {
+ int i;
+ char *cbush_mux[] = {"TRISTATE","RXLED","TXLED", "TXRXLED","PWREN",
+ "SLEEP","DRIVE_0","DRIVE_1","IOMODE","TXDEN",
+ "CLK24","CLK12","CLK6","BAT_DETECT","BAT_DETECT#",
+ "I2C_TXE#", "I2C_RXF#", "VBUS_SENSE", "BB_WR#",
+ "BBRD#", "TIME_STAMP", "AWAKE#",
+ };
+ fprintf(stdout,"IOBUS has %d mA drive%s%s\n",
+ (eeprom->group0_drive+1) *4,
+ (eeprom->group0_schmitt)?" Schmitt Input":"",
+ (eeprom->group0_slew)?" Slow Slew":"");
+ fprintf(stdout,"CBUS has %d mA drive%s%s\n",
+ (eeprom->group1_drive+1) *4,
+ (eeprom->group1_schmitt)?" Schmitt Input":"",
+ (eeprom->group1_slew)?" Slow Slew":"");
+ for (i=0; i<4; i++)
+ {
+ if (eeprom->cbus_function[i]<= CBUSH_AWAKE)
+ fprintf(stdout,"CBUS%d Function: %s\n", i, cbush_mux[eeprom->cbus_function[i]]);
+ }
+ }
if (ftdi->type == TYPE_R)
{
case GROUP3_SLEW:
*value = ftdi->eeprom->group3_slew;
break;
- case POWER_SAVE:
+ case POWER_SAVE:
*value = ftdi->eeprom->powersave;
break;
- case CLOCK_POLARITY:
+ case CLOCK_POLARITY:
*value = ftdi->eeprom->clock_polarity;
break;
- case DATA_ORDER:
+ case DATA_ORDER:
*value = ftdi->eeprom->data_order;
break;
- case FLOW_CONTROL:
+ case FLOW_CONTROL:
*value = ftdi->eeprom->flow_control;
break;
- case CHIP_TYPE:
+ case CHIP_TYPE:
*value = ftdi->eeprom->chip;
break;
case CHIP_SIZE:
case CHIP_TYPE:
ftdi->eeprom->chip = value;
break;
- case POWER_SAVE:
+ case POWER_SAVE:
ftdi->eeprom->powersave = value;
break;
- case CLOCK_POLARITY:
+ case CLOCK_POLARITY:
ftdi->eeprom->clock_polarity = value;
break;
- case DATA_ORDER:
+ case DATA_ORDER:
ftdi->eeprom->data_order = value;
break;
- case FLOW_CONTROL:
+ case FLOW_CONTROL:
ftdi->eeprom->flow_control = value;
break;
case CHIP_SIZE:
for (i = 0; i < ftdi->eeprom->size/2; i++)
{
+ /* Do not try to write to reserved area */
+ if ((ftdi->type == TYPE_230X) && (i == 0x40))
+ {
+ i = 0x50;
+ }
usb_val = eeprom[i*2];
usb_val += eeprom[(i*2)+1] << 8;
if (libusb_control_transfer(ftdi->usb_dev, FTDI_DEVICE_OUT_REQTYPE,
git://developer.intra2net.com / libftdi / blobdiff