}
/**
- Set (RS232) line characteristics by Alain Abbas
+ Set (RS232) line characteristics.
+ The break type can only be set via ftdi_set_line_property2()
+ and defaults to "off".
\param ftdi pointer to ftdi_context
\param bits Number of bits
int ftdi_set_line_property(struct ftdi_context *ftdi, enum ftdi_bits_type bits,
enum ftdi_stopbits_type sbit, enum ftdi_parity_type parity)
{
+ return ftdi_set_line_property2(ftdi, bits, sbit, parity, BREAK_OFF);
+}
+
+/**
+ Set (RS232) line characteristics
+
+ \param ftdi pointer to ftdi_context
+ \param bits Number of bits
+ \param sbit Number of stop bits
+ \param parity Parity mode
+ \param break_type Break type
+
+ \retval 0: all fine
+ \retval -1: Setting line property failed
+*/
+int ftdi_set_line_property2(struct ftdi_context *ftdi, enum ftdi_bits_type bits,
+ enum ftdi_stopbits_type sbit, enum ftdi_parity_type parity,
+ enum ftdi_break_type break_type)
+{
unsigned short value = bits;
switch(parity) {
break;
}
+ switch(break_type) {
+ case BREAK_OFF:
+ value |= (0x00 << 14);
+ break;
+ case BREAK_ON:
+ value |= (0x01 << 14);
+ break;
+ }
+
if (usb_control_msg(ftdi->usb_dev, 0x40, 0x04, value, ftdi->index, NULL, 0, ftdi->usb_write_timeout) != 0)
ftdi_error_return (-1, "Setting new line property failed");
return 0;
}
+
+/*
+ Flow control code by Lorenz Moesenlechner (lorenz@hcilab.org)
+ and Matthias Kranz (matthias@hcilab.org)
+*/
+/**
+ Set flowcontrol for ftdi chip
+
+ \param ftdi pointer to ftdi_context
+ \param flowctrl flow control to use. should be
+ SIO_DISABLE_FLOW_CTRL, SIO_RTS_CTS_HS, SIO_DTR_DSR_HS or SIO_XON_XOFF_HS
+
+ \retval 0: all fine
+ \retval -1: set flow control failed
+*/
+int ftdi_setflowctrl(struct ftdi_context *ftdi, int flowctrl)
+{
+ if (usb_control_msg(ftdi->usb_dev, SIO_SET_FLOW_CTRL_REQUEST_TYPE,
+ SIO_SET_FLOW_CTRL_REQUEST, 0, (flowctrl | ftdi->interface),
+ NULL, 0, ftdi->usb_write_timeout) != 0)
+ ftdi_error_return(-1, "set flow control failed");
+
+ return 0;
+}
+
+/**
+ Set dtr line
+
+ \param ftdi pointer to ftdi_context
+ \param state state to set line to (1 or 0)
+
+ \retval 0: all fine
+ \retval -1: set dtr failed
+*/
+int ftdi_setdtr(struct ftdi_context *ftdi, int state)
+{
+ unsigned short usb_val;
+
+ if (state)
+ usb_val = SIO_SET_DTR_HIGH;
+ else
+ usb_val = SIO_SET_DTR_LOW;
+
+ if (usb_control_msg(ftdi->usb_dev, SIO_SET_MODEM_CTRL_REQUEST_TYPE,
+ SIO_SET_MODEM_CTRL_REQUEST, usb_val, ftdi->interface,
+ NULL, 0, ftdi->usb_write_timeout) != 0)
+ ftdi_error_return(-1, "set dtr failed");
+
+ return 0;
+}
+
+/**
+ Set rts line
+
+ \param ftdi pointer to ftdi_context
+ \param state state to set line to (1 or 0)
+
+ \retval 0: all fine
+ \retval -1 set rts failed
+*/
+int ftdi_setrts(struct ftdi_context *ftdi, int state)
+{
+ unsigned short usb_val;
+
+ if (state)
+ usb_val = SIO_SET_RTS_HIGH;
+ else
+ usb_val = SIO_SET_RTS_LOW;
+
+ if (usb_control_msg(ftdi->usb_dev, SIO_SET_MODEM_CTRL_REQUEST_TYPE,
+ SIO_SET_MODEM_CTRL_REQUEST, usb_val, ftdi->interface,
+ NULL, 0, ftdi->usb_write_timeout) != 0)
+ ftdi_error_return(-1, "set of rts failed");
+
+ return 0;
+}
+
/**
Set the special event character
return ftdi->error_str;
}
-/*
- Flow control code by Lorenz Moesenlechner (lorenz@hcilab.org)
- and Matthias Kranz (matthias@hcilab.org)
-*/
-/**
- Set flowcontrol for ftdi chip
-
- \param ftdi pointer to ftdi_context
- \param flowctrl flow control to use. should be
- SIO_DISABLE_FLOW_CTRL, SIO_RTS_CTS_HS, SIO_DTR_DSR_HS or SIO_XON_XOFF_HS
-
- \retval 0: all fine
- \retval -1: set flow control failed
-*/
-int ftdi_setflowctrl(struct ftdi_context *ftdi, int flowctrl)
-{
- if (usb_control_msg(ftdi->usb_dev, SIO_SET_FLOW_CTRL_REQUEST_TYPE,
- SIO_SET_FLOW_CTRL_REQUEST, 0, (flowctrl | ftdi->interface),
- NULL, 0, ftdi->usb_write_timeout) != 0)
- ftdi_error_return(-1, "set flow control failed");
-
- return 0;
-}
-
-/**
- Set dtr line
-
- \param ftdi pointer to ftdi_context
- \param state state to set line to (1 or 0)
-
- \retval 0: all fine
- \retval -1: set dtr failed
-*/
-int ftdi_setdtr(struct ftdi_context *ftdi, int state)
-{
- unsigned short usb_val;
-
- if (state)
- usb_val = SIO_SET_DTR_HIGH;
- else
- usb_val = SIO_SET_DTR_LOW;
-
- if (usb_control_msg(ftdi->usb_dev, SIO_SET_MODEM_CTRL_REQUEST_TYPE,
- SIO_SET_MODEM_CTRL_REQUEST, usb_val, ftdi->interface,
- NULL, 0, ftdi->usb_write_timeout) != 0)
- ftdi_error_return(-1, "set dtr failed");
-
- return 0;
-}
-
-/**
- Set rts line
-
- \param ftdi pointer to ftdi_context
- \param state state to set line to (1 or 0)
-
- \retval 0: all fine
- \retval -1 set rts failed
-*/
-int ftdi_setrts(struct ftdi_context *ftdi, int state)
-{
- unsigned short usb_val;
-
- if (state)
- usb_val = SIO_SET_RTS_HIGH;
- else
- usb_val = SIO_SET_RTS_LOW;
-
- if (usb_control_msg(ftdi->usb_dev, SIO_SET_MODEM_CTRL_REQUEST_TYPE,
- SIO_SET_MODEM_CTRL_REQUEST, usb_val, ftdi->interface,
- NULL, 0, ftdi->usb_write_timeout) != 0)
- ftdi_error_return(-1, "set of rts failed");
-
- return 0;
-}
-
/* @} end of doxygen libftdi group */