}
-int ftdi_write_data(struct ftdi_context *ftdi, char *buf, int size) {
+int ftdi_write_data(struct ftdi_context *ftdi, unsigned char *buf, int size) {
int ret;
int offset = 0;
while (offset < size) {
}
-int ftdi_read_data(struct ftdi_context *ftdi, char *buf, int size) {
+int ftdi_read_data(struct ftdi_context *ftdi, unsigned char *buf, int size) {
/*
unsigned char buf[64];
int read_bytes;
}
-int ftdi_read_eeprom(struct ftdi_context *ftdi, char *eeprom) {
+void ftdi_eeprom_initdefaults(struct ftdi_eeprom *eeprom) {
+ eeprom->vendor_id = 0403;
+ eeprom->product_id = 6001;
+
+ eeprom->self_powered = 1;
+ eeprom->remote_wakeup = 1;
+ eeprom->BM_type_chip = 1;
+
+ eeprom->in_is_isochronous = 0;
+ eeprom->out_is_isochronous = 0;
+ eeprom->suspend_pull_downs = 0;
+
+ eeprom->use_serial = 0;
+ eeprom->change_usb_version = 0;
+ eeprom->usb_version = 200;
+ eeprom->max_power = 0;
+
+ eeprom->manufacturer = NULL;
+ eeprom->product = NULL;
+ eeprom->serial = NULL;
+}
+
+
+/*
+ ftdi_eeprom_build return codes:
+ positive value: used eeprom size
+ -1: eeprom size (128 bytes) exceeded by custom strings
+*/
+int ftdi_eeprom_build(struct ftdi_eeprom *eeprom, unsigned char *output) {
+ unsigned char i, j;
+ unsigned short checksum, value;
+ unsigned char manufacturer_size = 0, product_size = 0, serial_size = 0;
+ int size_check;
+
+ if (eeprom->manufacturer != NULL)
+ manufacturer_size = strlen(eeprom->manufacturer);
+ if (eeprom->product != NULL)
+ product_size = strlen(eeprom->product);
+ if (eeprom->serial != NULL)
+ serial_size = strlen(eeprom->serial);
+
+ size_check = 128; // eeprom is 128 bytes
+ size_check -= 28; // 28 are always in use (fixed)
+ size_check -= manufacturer_size*2;
+ size_check -= product_size*2;
+ size_check -= serial_size*2;
+
+ // eeprom size exceeded?
+ if (size_check < 0)
+ return (-1);
+
+ // empty eeprom
+ memset (output, 0, 128);
+
+ // Addr 00: Stay 00 00
+ // Addr 02: Vendor ID
+ output[0x02] = eeprom->vendor_id;
+ output[0x03] = eeprom->vendor_id >> 8;
+
+ // Addr 04: Product ID
+ output[0x04] = eeprom->product_id;
+ output[0x05] = eeprom->product_id >> 8;
+
+ // Addr 06: Device release number (0400h for BM features)
+ output[0x06] = 0x00;
+
+ if (eeprom->BM_type_chip == 1)
+ output[0x07] = 0x04;
+ else
+ output[0x07] = 0x02;
+
+ // Addr 08: Config descriptor
+ // Bit 1: remote wakeup if 1
+ // Bit 0: self powered if 1
+ //
+ j = 0;
+ if (eeprom->self_powered == 1)
+ j = j | 1;
+ if (eeprom->remote_wakeup == 1)
+ j = j | 2;
+ output[0x08] = j;
+
+ // Addr 09: Max power consumption: max power = value * 2 mA
+ output[0x09] = eeprom->max_power;;
+
+ // Addr 0A: Chip configuration
+ // Bit 7: 0 - reserved
+ // Bit 6: 0 - reserved
+ // Bit 5: 0 - reserved
+ // Bit 4: 1 - Change USB version
+ // Bit 3: 1 - Use the serial number string
+ // Bit 2: 1 - Enable suspend pull downs for lower power
+ // Bit 1: 1 - Out EndPoint is Isochronous
+ // Bit 0: 1 - In EndPoint is Isochronous
+ //
+ j = 0;
+ if (eeprom->in_is_isochronous == 1)
+ j = j | 1;
+ if (eeprom->out_is_isochronous == 1)
+ j = j | 2;
+ if (eeprom->suspend_pull_downs == 1)
+ j = j | 4;
+ if (eeprom->use_serial == 1)
+ j = j | 8;
+ if (eeprom->change_usb_version == 1)
+ j = j | 16;
+ output[0x0A] = j;
+
+ // Addr 0B: reserved
+ output[0x0B] = 0x00;
+
+ // Addr 0C: USB version low byte when 0x0A bit 4 is set
+ // Addr 0D: USB version high byte when 0x0A bit 4 is set
+ if (eeprom->change_usb_version == 1) {
+ output[0x0C] = eeprom->usb_version;
+ output[0x0D] = eeprom->usb_version >> 8;
+ }
+
+
+ // Addr 0E: Offset of the manufacturer string + 0x80
+ output[0x0E] = 0x14 + 0x80;
+
+ // Addr 0F: Length of manufacturer string
+ output[0x0F] = manufacturer_size*2 + 2;
+
+ // Addr 10: Offset of the product string + 0x80, calculated later
+ // Addr 11: Length of product string
+ output[0x11] = product_size*2 + 2;
+
+ // Addr 12: Offset of the serial string + 0x80, calculated later
+ // Addr 13: Length of serial string
+ output[0x13] = serial_size*2 + 2;
+
+ // Dynamic content
+ output[0x14] = manufacturer_size;
+ output[0x15] = 0x03; // type: string
+
+ i = 0x16, j = 0;
+
+ // Output manufacturer
+ for (j = 0; j < manufacturer_size; j++) {
+ output[i] = eeprom->manufacturer[j], i++;
+ output[i] = 0x00, i++;
+ }
+
+ // Output product name
+ output[0x10] = i + 0x80; // calculate offset
+ output[i] = product_size*2 + 2, i++;
+ output[i] = 0x03, i++;
+ for (j = 0; j < product_size; j++) {
+ output[i] = eeprom->product[j], i++;
+ output[i] = 0x00, i++;
+ }
+
+ // Output serial
+ output[0x12] = i + 0x80; // calculate offset
+ output[i] = serial_size*2 + 2, i++;
+ output[i] = 0x03, i++;
+ for (j = 0; j < serial_size; j++) {
+ output[i] = eeprom->serial[j], i++;
+ output[i] = 0x00, i++;
+ }
+
+ // calculate checksum
+ checksum = 0xAAAA;
+
+ for (i = 0; i < 63; i++) {
+ value = output[i*2];
+ value += output[(i*2)+1] << 8;
+
+ checksum = value^checksum;
+ checksum = (checksum << 1) | (checksum >> 15);
+ }
+
+ output[0x7E] = checksum;
+ output[0x7F] = checksum >> 8;
+
+ return size_check;
+}
+
+
+int ftdi_read_eeprom(struct ftdi_context *ftdi, unsigned char *eeprom) {
int i;
for (i = 0; i < 64; i++) {
}
-int ftdi_write_eeprom(struct ftdi_context *ftdi, char *eeprom) {
+int ftdi_write_eeprom(struct ftdi_context *ftdi, unsigned char *eeprom) {
unsigned short usb_val;
int i;