Even with a 93xx66 EEPROM, at maximum 256 Bytes are used
All important things happen in the first
-0x14(FT232/245), 0x16(FT2232CD), 0x18(FT232/245R) or 0x1a (FT2232H/4432H)
-bytes
+0x14(FT232/245), 0x16(FT2232CD), 0x18(FT232/245R) or 0x1a (FT2232H/4432H) bytes
Type | Use extra EEPROM space
FT2XXB | No
Byte.BIT| TYPE_AM TYPE_BM TYPE_2232C TYPE_R TYPE_2232H TYPE_4232H
-00.0 | 0 0 channel_a_type channel_a_type channel_a_type
-00.1 | 0 0 channel_a_type channel_a_type channel_a_type
-00.2 | 0 0 channel_a_type high_current channel_a_type channel_a_type
+00.0 | 0 0 channel_a_type 232R/245R channel_a_type 0
+00.1 | 0 0 channel_a_type channel_a_type 0
+00.2 | 0 0 channel_a_type high_current channel_a_type 0
00.3 | 0 0 channel_a_driver channel_a_driver channel_a_driver channel_a_driver
-00.4 | 0 0 high_current_a 0 0 0
+00.4 | 0 0 high_current_a 0 0 0
00.5 | 0 0 0 0 0 0
00.6 | 0 0 0 0 0 0
-00.7 | 0 0 0 0 SUSPEND_DBUS7 0
+00.7 | 0 0 0 0 SUSPEND_DBUS7 channel_c_driver
+On TYPE_R 00.0 is set for the FT245R and cleared for the FT232R
On TYPE_R 00.3 set mean D2XX, on other devices VCP
-01.0 | 0 0 channel_b_type channel_b_type channel_b_type
-01.1 | 0 0 channel_b_type channel_b_type channel_b_type
-01.2 | 0 0 channel_b_type 0 channel_b_type channel_b_type
+01.0 | 0 0 channel_b_type channel_b_type 0
+01.1 | 0 0 channel_b_type channel_b_type 0
+01.2 | 0 0 channel_b_type 0 channel_b_type 0
01.3 | 0 0 channel_b_driver 0 channel_b_driver channel_b_driver
-01.4 | 0 0 high_current_b 0 0 0
+01.4 | 0 0 high_current_b 0 0 0
01.5 | 0 0 0 0 0 0
-01.6 | 0 0 0 0 0
-01.7 | 0 0 0 0 0 0
+01.6 | 0 0 0 0 0
+01.7 | 0 0 0 0 0 channel_d_driver
-Fixme: Missing 4232H validation and channel_c_driver, channel_d_driver, channel_a|b|c|d_rs484enable
+Fixme: Missing 4232H validation
02 | Vendor ID (VID) LSB (all)
03 | Vendor ID (VID) MSB (all)
|
09 | Max power (mA/2)
|
-Byte.BIT| TYPE_AM TYPE_BM TYPE_2232C TYPE_R TYPE_2232H TYPE_4232H
-0a.0 | 0 IsoIn
-0a.1 | 0 IsoOut
-0a.2 | 0 suspend_pull_down suspend_pull_down suspend_pull_down
-0a.3 | 0 use_serial use_serial
+Byte.BIT| TYPE_AM TYPE_BM TYPE_2232C TYPE_R TYPE_2232H TYPE_4232H
+0a.0 | 0 IsoIn IsoIn part A 0 0 0
+0a.1 | 0 IsoOut IsoOut part A 0 0 0
+0a.2 | 0 suspend_pull_down suspend_pull_down suspend_pull_down suspend_pull_down
+0a.3 | 0 use_serial use_serial use_serial
0a.4 | 0 change_usb_version change_usb_version
-0a.5 | 0 - reserved
-0a.6 | 0 - reserved
+0a.5 | 0 0 IsoIn part B 0 0 0
+0a.6 | 0 0 IsoOut part B 0 0 0
0a.7 | 0 - reserved
- |
-0b | TYPE_R Bitmask Invert, 0 else
+0b | TYPE_R Bitmask Invert, 0 else
+Byte.BIT| TYPE_4232H
+0b.4 | channel_a_rs485enable
+0b.5 | channel_b_rs485enable
+0b.6 | channel_c_rs485enable
+0b.7 | channel_d_rs485enable
Byte | TYPE_AM TYPE_BM TYPE_2232C TYPE_R TYPE_2232H TYPE_4232H
0c | 0 USB-VER-LSB USB-VER-LSB 0 ? ?
15.7:0 | UA UA 0 CBUS[3] BH D
16.3:0 | UA UA UA CBUS[4] 0 0
16.7:0 | UA UA UA 0 0 0
-
+
+CHIP values:
+0x46: EEPROM is a 93xx46
+0x56: EEPROM is a 93xx56
+0x66: EEPROM is a 93xx66
+
17 UA UA UA 0 0 0
18 UA UA UA VENDOR CHIP CHIP
19 UA UA UA VENDOR 0 0
-1a UA(all)
+1a UA (all)
+
+
+Additional fields after the serial string:
+0x00, 0x00 - reserved for "legacy port name prefix"
+0x00, 0x00 - reserved for plug and play options
+(Observed values with PnP == 0:
+0x02 0x03 0x01 0x00)
-Mprog doesn's seem to write this:
-After last string
-0x02 0x03 0x01 with PnP == 0
+Note: The additional fields after the serial number string
+collide with the official FTDI formula from AN_121 regarding
+the start of the user area:
+"Start Address = the address following the last byte of SerialNumber string."