+++ /dev/null
-#! /bin/sh
-#
-# cvs.sh
-#
-# This file contains support code from Makefile.common
-# It defines a shell function for each known target
-# and then does a case to call the correct function.
-
-call_and_fix_autoconf()
-{
- $AUTOCONF || exit 1
- if test -r configure.in.in ; then
- perl -pi -e "print \"if test \\\"x\\\$with_fast_perl\\\" = \\\"xyes\\\"; then\
- \\n perl -i.bak \\\$ac_aux_dir/conf.change.pl \\\$CONFIG_STATUS\
- \\\\\\n || mv \\\$CONFIG_STATUS.bak \\\$CONFIG_STATUS\
- \\n rm -f \\\$CONFIG_STATUS.bak\\nfi\
- \\n\" if /^\\s*chmod\\s+.*\\+x\\s+.*CONFIG_STATUS/;" configure
- fi
-}
-
-strip_makefile()
-{
- if test -f $makefile_wo; then :; else
- perl -e '$in=0; while ( <> ) { $in = 1 if ($_=~ m/^if /); print $_ unless ($in); $in = 0 if ($_ =~ m/^endif/); }' < Makefile.am.in > $makefile_wo
- fi
-}
-
-check_autotool_versions()
-{
-AUTOCONF_VERSION=`$AUTOCONF --version | head -1`
-case $AUTOCONF_VERSION in
- Autoconf*2.5* | autoconf*2.5* ) : ;;
- "" )
- echo "*** AUTOCONF NOT FOUND!."
- echo "*** KDE requires autoconf 2.52, 2.53 or 2.54"
- exit 1
- ;;
- * )
- echo "*** YOU'RE USING $AUTOCONF_VERSION."
- echo "*** KDE requires autoconf 2.52, 2.53 or 2.54"
- exit 1
- ;;
-esac
-
-AUTOHEADER_VERSION=`$AUTOHEADER --version | head -1`
-case $AUTOHEADER_VERSION in
- Autoconf*2.5* | autoheader*2.5* ) : ;;
- "" )
- echo "*** AUTOHEADER NOT FOUND!."
- echo "*** KDE requires autoheader 2.52 or 2.53 (part of autoconf)"
- exit 1
- ;;
- * )
- echo "*** YOU'RE USING $AUTOHEADER_VERSION."
- echo "*** KDE requires autoheader 2.52 or 2.53 (part of autoconf)"
- exit 1
- ;;
-esac
-
-AUTOMAKE_STRING=`$AUTOMAKE --version | head -1`
-case $AUTOMAKE_STRING in
- automake*1.5d* )
- echo "*** YOU'RE USING $AUTOMAKE_STRING."
- echo "*** KDE requires automake 1.5"
- exit 1
- ;;
- automake*1.5* | automake*1.5-* | automake*1.6.* | automake*1.7* ) : ;;
- "" )
- echo "*** AUTOMAKE NOT FOUND!."
- echo "*** KDE requires automake 1.5"
- exit 1
- ;;
- unsermake* ) :
- echo "*** YOU'RE USING UNSERMAKE."
- echo "*** GOOD LUCK!! :)"
- ;;
- * )
- echo "*** YOU'RE USING $AUTOMAKE_STRING."
- echo "*** KDE requires automake 1.5"
- exit 1
- ;;
-esac
-}
-
-cvs()
-{
-check_autotool_versions
-
-### Produce acinclude.m4
-if grep '\$(top_srcdir)/acinclude.m4:' $makefile_am >/dev/null; then
- echo "*** Creating acinclude.m4"
- rm -f acinclude.m4 configure.files
-
- strip_makefile
- $MAKE -f $makefile_wo top_srcdir=. ./acinclude.m4
-fi
-
-### Make new subdirs and configure.in.
-### The make calls could be optimized away here,
-### with a little thought.
-if test -r configure.in.in; then
- rm -f subdirs configure.in
- echo "*** Creating list of subdirectories"
- subdirs
- echo "*** Creating configure.in"
- configure_files
- strip_makefile
- $MAKE -f $makefile_wo top_srcdir=. ./configure.in || exit 1
-fi
-
-echo "*** Creating aclocal.m4"
-$ACLOCAL || exit 1
-echo "*** Creating configure"
-call_and_fix_autoconf
-
-if egrep "^AM_CONFIG_HEADER" configure.in >/dev/null 2>&1; then
- echo "*** Creating config.h template"
- $AUTOHEADER || exit 1
-fi
-
-echo "*** Creating Makefile templates"
-$AUTOMAKE || exit 1
-if test -z "$UNSERMAKE"; then
- echo "*** Postprocessing Makefile templates"
- perl -w admin/am_edit || exit 1
-fi
-
-if egrep "^cvs-local:" $makefile_am >/dev/null; then \
- strip_makefile
- $MAKE -f $makefile_wo cvs-local top_srcdir=. || exit 1
-fi
-
-echo "*** Creating date/time stamp"
-touch stamp-h.in
-
-echo "*** Finished"
-echo " Don't forget to run ./configure"
-echo " If you haven't done so in a while, run ./configure --help"
-}
-
-dist()
-{
-check_autotool_versions
-
-###
-### First build all of the files necessary to do just "make"
-###
-if grep '\$(top_srcdir)/acinclude.m4:' $makefile_am >/dev/null; then
- strip_makefile
- $MAKE -f $makefile_wo top_srcdir=. ./acinclude.m4
-fi
-if test -r configure.in.in; then
- subdirs
- configure_files
- strip_makefile
- $MAKE -f $makefile_wo top_srcdir=. ./configure.in
-fi
-$ACLOCAL
-$AUTOHEADER
-$AUTOMAKE --foreign --include-deps
-perl -w admin/am_edit
-call_and_fix_autoconf
-touch stamp-h.in
-if grep "^cvs-local:" $makefile_am >/dev/null; then
- strip_makefile
- $MAKE -f $makefile_wo cvs-local top_srcdir=.
-fi
-
-###
-### Then make messages
-###
-if test -d po; then
- LIST=`find ./po -name "*.po"`
- for i in $LIST; do
- file2=`echo $i | sed -e "s#\.po#\.gmo#"`
- msgfmt -o $file2 $i || touch $file2
- done
-fi
-if grep "^cvs-dist-local:" $makefile_am >/dev/null; then
- strip_makefile
- $MAKE -f $makefile_wo cvs-dist-local top_srcdir=.
-fi
-}
-
-subdir_dist()
-{
-$ACLOCAL
-$AUTOHEADER
-$AUTOMAKE --foreign --include-deps
-perl -w ../admin/am_edit
-call_and_fix_autoconf
-}
-
-configure_in()
-{
-rm -f configure.in configure.in.new
-kde_use_qt_param=
-test -f configure.files || { echo "need configure.files for configure.in"; exit 1; }
-cat `egrep -v "configure.in.bot" < configure.files` > configure.in.new
-echo "KDE_CREATE_SUBDIRSLIST" >> configure.in.new
-if test -f Makefile.am.in; then
- subdirs=`cat subdirs`
- for dir in $subdirs; do
- dir=`echo $dir | sed -e "s,[-+.],_,g"`
- echo "AM_CONDITIONAL($dir""_SUBDIR_included, test \"x\$$dir""_SUBDIR_included\" = xyes)" >> configure.in.new
- done
-fi
-# echo "AC_OUTPUT( \\" >> configure.in.new
-mfs=`find . -type d -print | fgrep -v "/." | \
- sed -e "s#\./##" -e "/^debian/d" | sort`
-for i in $mfs; do
- topleveldir=`echo $i| sed -e "s#/.*##"`
- if test -f $topleveldir/configure.in; then
- continue
- fi
- if test -f $i/Makefile.am; then :; else
- continue
- fi
- if test -s inst-apps; then
- if grep "\"^$topleveldir\"" inst-apps > /dev/null 2>&1; then
- continue
- fi
- fi
- if test "$i" = "."; then
- echo "AC_CONFIG_FILES([ Makefile ])" >> configure.in.new
- else
- echo "AC_CONFIG_FILES([ $i/Makefile ])" >> configure.in.new
- fi
- if test -n "$UNSERMAKE"; then
- if test "$i" = "."; then
- echo "AC_CONFIG_FILES([ Makefile.rules ])" >> configure.in.new
- else
- echo "AC_CONFIG_FILES([ $i/Makefile.rules ])" >> configure.in.new
- fi
- fi
-done
-
-files=`cat configure.files`
-list=`egrep '^dnl AC_OUTPUT\(.*\)' $files | sed -e "s#^.*dnl AC_OUTPUT(\(.*\))#\1#"`
-for file in $list; do
- echo "AC_CONFIG_FILES([ $file ])" >> configure.in.new
-done
-
-if test -n "$UNSERMAKE"; then
- echo "AC_CONFIG_FILES([ MakeVars ])" >> configure.in.new
-fi
-echo "AC_OUTPUT" >> configure.in.new
-modulename=
-if test -f configure.in.in; then
- if head -2 configure.in.in | egrep "^#MIN_CONFIG\(.*\)$" > /dev/null; then
- kde_use_qt_param=`cat configure.in.in | sed -n -e "s/#MIN_CONFIG(\(.*\))/\1/p"`
- fi
- if head -2 configure.in.in | egrep "^#MIN_CONFIG" > /dev/null; then
- line=`grep "^AM_INIT_AUTOMAKE(" configure.in.in`
- if test -n "$line"; then
- modulename=`echo $line | sed -e "s#AM_INIT_AUTOMAKE(\([^,]*\),.*#\1#"`
- VERSION=`echo $line | sed -e "s#AM_INIT_AUTOMAKE([^,]*, *\([^)]*\)).*#\1#"`
- fi
- sed -e "s#AM_INIT_AUTOMAKE([^@].*#dnl PACKAGE set before#" \
- configure.in.new > configure.in && mv configure.in configure.in.new
- fi
-fi
-if test -z "$VERSION" || test "$VERSION" = "@VERSION@"; then
- VERSION="\"3.1.0\""
-fi
-if test -z "$modulename" || test "$modulename" = "@MODULENAME@"; then
- modulename=`pwd`;
- modulename=`basename $modulename`
- esc_VERSION=`echo $VERSION | sed -e "s#[^.0-9a-zA-Z]##g"`
- modulename=`echo $modulename | sed -e "s#-$esc_VERSION##"`
-
-fi
-if test -n "$kde_use_qt_param"; then
- sed -e "s#^dnl KDE_USE_QT#KDE_USE_QT($kde_use_qt_param)#" \
- configure.in.new > configure.in && mv configure.in configure.in.new
-fi
-sed -e "s#@MODULENAME@#$modulename#" configure.in.new |
- sed -e "s#@VERSION@#$VERSION#" > configure.in
-botfiles=`cat configure.files | egrep "configure.in.bot"`
-test -n "$botfiles" && cat $botfiles >> configure.in
-cat $admindir/configure.in.bot.end >> configure.in
-rm -f configure.in.new
-}
-
-configure_files()
-{
-admindir=NO
-for i in . .. ../.. ../../..; do
- if test -x $i/admin; then admindir=$i/admin; break; fi
-done
-rm -f configure.files
-touch configure.files
-if test -f configure.in.in && head -2 configure.in.in | grep "^#MIN_CONFIG" > /dev/null; then
- echo $admindir/configure.in.min >> configure.files
-fi
-test -f configure.in.in && echo configure.in.in >> configure.files
-list=`find . -name "configure.in.in" -o -name "configure.in.bot" | sort`
-for i in $list; do if test -f $i && test `dirname $i` != "." ; then
- echo $i >> configure.files
-fi; done
-test -f configure.in.mid && echo configure.in.mid >> configure.files
-test -f configure.in.bot && echo configure.in.bot >> configure.files
-}
-
-subdirs()
-{
-dirs=
-compilefirst=`sed -ne 's#^COMPILE_FIRST[ ]*=[ ]*##p' $makefile_am | head -1`
-compilelast=`sed -ne 's#^COMPILE_LAST[ ]*=[ ]*##p' $makefile_am | head -1`
-for i in `ls -1`; do
- if test -f $i/Makefile.am; then
- case " $compilefirst $compilelast " in
- *" $i "*) ;;
- *) dirs="$dirs $i"
- esac
- fi
-done
-
-: > ./_SUBDIRS
-
-for d in $compilefirst; do
- echo $d >> ./_SUBDIRS
-done
-
-(for d in $dirs; do
- list=`sed -ne "s#^COMPILE_BEFORE_$d""[ ]*=[ ]*##p" $makefile_am | head -1`
- for s in $list; do
- echo $s $d
- done
- list=`sed -ne "s#^COMPILE_AFTER_$d""[ ]*=[ ]*##p" $makefile_am | head -1`
- for s in $list; do
- echo $d $s
- done
- echo $d $d
-done ) | tsort >> ./_SUBDIRS
-
-for d in $compilelast; do
- echo $d >> ./_SUBDIRS
-done
-
-if test -f Makefile.am.in; then
- cp Makefile.am.in Makefile.am
- if test -n "$UNSERMAKE"; then
- topsubdirs=
- for i in $compilefirst $dirs $compilelast; do
- vari=`echo $i | sed -e "s,[-+],_,g"`
- echo "if $vari""_SUBDIR_included" >> Makefile.am
- echo "$vari""_SUBDIR=$i" >> Makefile.am
- echo "endif" >> Makefile.am
- topsubdirs="$topsubdirs \$($vari""_SUBDIR)"
- done
- echo "SUBDIRS=$topsubdirs" >> Makefile.am
- else
- echo "SUBDIRS="'$(TOPSUBDIRS)' >> Makefile.am
- fi
-fi
-if test -r subdirs && diff subdirs _SUBDIRS > /dev/null; then
- rm -f _SUBDIRS
-fi
-test -r _SUBDIRS && mv _SUBDIRS subdirs || true
-}
-
-cvs_clean()
-{
-if test -d CVS; then :; else
- echo "You don't have a toplevel CVS directory."
- echo "You most certainly didn't use cvs to get these sources."
- echo "But this function depends on cvs's information."
- exit 1
-fi
-perl $admindir/cvs-clean.pl
-}
-
-package_merge()
-{
-catalogs=$POFILES
-for cat in $catalogs; do
- msgmerge -o $cat.new $cat $PACKAGE.pot
- if test -s $cat.new; then
- grep -v "\"POT-Creation" $cat.new > $cat.new.2
- grep -v "\"POT-Creation" $cat >> $cat.new.1
- if diff $cat.new.1 $cat.new.2; then
- rm $cat.new
- else
- mv $cat.new $cat
- fi
- rm -f $cat.new.1 $cat.new.2
- fi
-done
-}
-
-package_messages()
-{
-rm -rf po.backup
-mkdir po.backup
-
-for i in `ls -1 po/*.pot 2>/dev/null | sed -e "s#po/##"`; do
- egrep -v '^#([^:]|$)' po/$i | egrep '^.*[^ ]+.*$' | grep -v "\"POT-Creation" > po.backup/$i
- cp po/$i po.backup/backup_$i
- touch -r po/$i po.backup/backup_$i
- rm po/$i
-done
-
-podir=${podir:-$PWD/po}
-files=`find . -name Makefile.am | xargs egrep -l '^messages:' `
-dirs=`for i in $files; do echo \`dirname $i\`; done`
-tmpname="$PWD/messages.log"
-if test -z "$EXTRACTRC"; then EXTRACTRC=extractrc ; fi
-if test -z "$PREPARETIPS"; then PREPARETIPS=preparetips ; fi
-export EXTRACTRC PREPARETIPS
-
-for subdir in $dirs; do
- test -z "$VERBOSE" || echo "Making messages in $subdir"
- (cd $subdir
- if test -n "`grep -e '^messages:.*rc.cpp' Makefile.am`"; then
- $EXTRACTRC *.rc *.ui > rc.cpp
- else
- candidates=`ls -1 *.rc *.ui 2>/dev/null`
- if test -n "$candidates"; then
- echo "$subdir has *.rc or *.ui files, but not correct messages line"
- fi
- fi
- if test -n "`grep -r KAboutData *.c* *.C* 2>/dev/null`"; then
- echo -e 'i18n("_: NAME OF TRANSLATORS\\n"\n"Your names")\ni18n("_: EMAIL OF TRANSLATORS\\n"\n"Your emails")' > _translatorinfo.cpp
- else echo " " > _translatorinfo.cpp
- fi
- perl -e '$mes=0; while (<STDIN>) { next if (/^(if|else|endif)\s/); if (/^messages:/) { $mes=1; print $_; next; } if ($mes) { if (/$\\(XGETTEXT\)/ && / -o/) { s/ -o \$\(podir\)/ _translatorinfo.cpp -o \$\(podir\)/ } print $_; } else { print $_; } }' < Makefile.am | egrep -v '^include ' > _transMakefile
-
- $MAKE -s -f _transMakefile podir=$podir EXTRACTRC="$EXTRACTRC" PREPARETIPS="$PREPARETIPS" \
- XGETTEXT="${XGETTEXT:-xgettext} -C -ki18n -ktr2i18n -kI18N_NOOP -ktranslate -kaliasLocale -x ${includedir:-$KDEDIR/include}/kde.pot" \
- messages
- ) 2>&1 | grep -v '^make\[1\]' > $tmpname
- test -s $tmpname && { echo $subdir ; cat "$tmpname"; }
- test -f $subdir/rc.cpp && rm -f $subdir/rc.cpp
- rm -f $subdir/_translatorinfo.cpp
- rm -f $subdir/_transMakefile
-done
-rm -f $tmpname
-for i in `ls -1 po.backup/*.pot 2>/dev/null | sed -e "s#po.backup/##" | egrep -v '^backup_'`; do
- test -f po/$i || echo "disappeared: $i"
-done
-for i in `ls -1 po/*.pot 2>/dev/null | sed -e "s#po/##"`; do
- msgmerge -q -o po/$i po/$i po/$i
- egrep -v '^#([^:]|$)' po/$i | egrep '^.*[^ ]+.*$' | grep -v "\"POT-Creation" > temp.pot
- if test -f po.backup/$i && test -n "`diff temp.pot po.backup/$i`"; then
- echo "will update $i"
- msgmerge -q po.backup/backup_$i po/$i > temp.pot
- mv temp.pot po/$i
- else
- if test -f po.backup/backup_$i; then
- test -z "$VERBOSE" || echo "I'm restoring $i"
- mv po.backup/backup_$i po/$i
- rm po.backup/$i
- else
- echo "will add $i"
- fi
- fi
-done
-rm -f temp.pot
-rm -rf po.backup
-}
-
-admindir=`echo "$0" | sed 's%[\\/][^\\/][^\\/]*$%%'`
-test "x$admindir" = "x$0" && admindir=.
-
-test "x$MAKE" = x && MAKE=make
-makefile_am=Makefile.am
-makefile_wo=Makefile.am
-if test -f Makefile.am.in; then
- makefile_am=Makefile.am.in
- makefile_wo=Makefile.am.in.wo
-fi
-
-# Suck in the AUTOCONF detection code
-. $admindir/detect-autoconf.sh
-
-###
-### Main
-###
-
-arg=`echo $1 | tr '\-.' __`
-case $arg in
- cvs | dist | subdir_dist | configure_in | configure_files | subdirs | \
- cvs_clean | package_merge | package_messages ) $arg ;;
- * ) echo "Usage: cvs.sh <target>"
- echo "Target can be one of:"
- echo " cvs cvs-clean dist"
- echo " configure.in configure.files"
- echo " package-merge package-messages"
- echo ""
- echo "Usage: anything but $1"
- exit 1 ;;
-esac
-
-if test -f Makefile.am.in.wo; then
- rm Makefile.am.in.wo
-fi
-
-exit 0
git://developer.intra2net.com / libftdi / blobdiff