| 1 | /*************************************************************************** |
| 2 | ftdi.c - description |
| 3 | ------------------- |
| 4 | begin : Fri Apr 4 2003 |
| 5 | copyright : (C) 2003 by Intra2net AG |
| 6 | email : opensource@intra2net.com |
| 7 | ***************************************************************************/ |
| 8 | |
| 9 | /*************************************************************************** |
| 10 | * * |
| 11 | * This program is free software; you can redistribute it and/or modify * |
| 12 | * it under the terms of the GNU Lesser General Public License * |
| 13 | * version 2.1 as published by the Free Software Foundation; * |
| 14 | * * |
| 15 | ***************************************************************************/ |
| 16 | |
| 17 | #include <usb.h> |
| 18 | |
| 19 | #include "ftdi.h" |
| 20 | |
| 21 | /* ftdi_init return codes: |
| 22 | 0: all fine |
| 23 | -1: couldn't allocate read buffer |
| 24 | */ |
| 25 | int ftdi_init(struct ftdi_context *ftdi) { |
| 26 | ftdi->usb_dev = NULL; |
| 27 | ftdi->usb_timeout = 5000; |
| 28 | |
| 29 | ftdi->baudrate = -1; |
| 30 | ftdi->bitbang_enabled = 0; |
| 31 | |
| 32 | ftdi->readbuffer = NULL; |
| 33 | ftdi->readbuffer_offset = 0; |
| 34 | ftdi->readbuffer_remaining = 0; |
| 35 | ftdi->writebuffer_chunksize = 4096; |
| 36 | |
| 37 | ftdi->error_str = NULL; |
| 38 | |
| 39 | // all fine. Now allocate the readbuffer |
| 40 | return ftdi_read_data_set_chunksize(ftdi, 4096); |
| 41 | } |
| 42 | |
| 43 | |
| 44 | void ftdi_deinit(struct ftdi_context *ftdi) { |
| 45 | if (ftdi->readbuffer != NULL) { |
| 46 | free(ftdi->readbuffer); |
| 47 | ftdi->readbuffer = NULL; |
| 48 | } |
| 49 | } |
| 50 | |
| 51 | |
| 52 | void ftdi_set_usbdev (struct ftdi_context *ftdi, usb_dev_handle *usb) { |
| 53 | ftdi->usb_dev = usb; |
| 54 | } |
| 55 | |
| 56 | |
| 57 | /* ftdi_usb_open return codes: |
| 58 | 0: all fine |
| 59 | -1: usb_find_busses() failed |
| 60 | -2: usb_find_devices() failed |
| 61 | -3: usb device not found |
| 62 | -4: unable to open device |
| 63 | -5: unable to claim device |
| 64 | -6: reset failed |
| 65 | -7: set baudrate failed |
| 66 | */ |
| 67 | int ftdi_usb_open(struct ftdi_context *ftdi, int vendor, int product) { |
| 68 | struct usb_bus *bus; |
| 69 | struct usb_device *dev; |
| 70 | |
| 71 | usb_init(); |
| 72 | |
| 73 | if (usb_find_busses() < 0) { |
| 74 | ftdi->error_str = "usb_find_busses() failed"; |
| 75 | return -1; |
| 76 | } |
| 77 | |
| 78 | if (usb_find_devices() < 0) { |
| 79 | ftdi->error_str = "usb_find_devices() failed"; |
| 80 | return -2; |
| 81 | } |
| 82 | |
| 83 | for (bus = usb_busses; bus; bus = bus->next) { |
| 84 | for (dev = bus->devices; dev; dev = dev->next) { |
| 85 | if (dev->descriptor.idVendor == vendor && dev->descriptor.idProduct == product) { |
| 86 | ftdi->usb_dev = usb_open(dev); |
| 87 | if (ftdi->usb_dev) { |
| 88 | if (usb_claim_interface(ftdi->usb_dev, 0) != 0) { |
| 89 | ftdi->error_str = "unable to claim usb device. You can still use it though..."; |
| 90 | return -5; |
| 91 | } |
| 92 | |
| 93 | if (ftdi_usb_reset (ftdi) != 0) |
| 94 | return -6; |
| 95 | |
| 96 | if (ftdi_set_baudrate (ftdi, 9600) != 0) |
| 97 | return -7; |
| 98 | |
| 99 | return 0; |
| 100 | } else { |
| 101 | ftdi->error_str = "usb_open() failed"; |
| 102 | return -4; |
| 103 | } |
| 104 | } |
| 105 | } |
| 106 | |
| 107 | } |
| 108 | |
| 109 | // device not found |
| 110 | return -3; |
| 111 | } |
| 112 | |
| 113 | |
| 114 | int ftdi_usb_reset(struct ftdi_context *ftdi) { |
| 115 | if (usb_control_msg(ftdi->usb_dev, 0x40, 0, 0, 0, NULL, 0, ftdi->usb_timeout) != 0) { |
| 116 | ftdi->error_str = "FTDI reset failed"; |
| 117 | return -1; |
| 118 | } |
| 119 | |
| 120 | return 0; |
| 121 | } |
| 122 | |
| 123 | int ftdi_usb_purge_buffers(struct ftdi_context *ftdi) { |
| 124 | if (usb_control_msg(ftdi->usb_dev, 0x40, 0, 1, 0, NULL, 0, ftdi->usb_timeout) != 0) { |
| 125 | ftdi->error_str = "FTDI purge of RX buffer failed"; |
| 126 | return -1; |
| 127 | } |
| 128 | |
| 129 | if (usb_control_msg(ftdi->usb_dev, 0x40, 0, 2, 0, NULL, 0, ftdi->usb_timeout) != 0) { |
| 130 | ftdi->error_str = "FTDI purge of TX buffer failed"; |
| 131 | return -1; |
| 132 | } |
| 133 | |
| 134 | return 0; |
| 135 | } |
| 136 | |
| 137 | /* ftdi_usb_close return codes |
| 138 | 0: all fine |
| 139 | -1: usb_release failed |
| 140 | -2: usb_close failed |
| 141 | */ |
| 142 | int ftdi_usb_close(struct ftdi_context *ftdi) { |
| 143 | int rtn = 0; |
| 144 | |
| 145 | if (usb_release_interface(ftdi->usb_dev, 0) != 0) |
| 146 | rtn = -1; |
| 147 | |
| 148 | if (usb_close (ftdi->usb_dev) != 0) |
| 149 | rtn = -2; |
| 150 | |
| 151 | return rtn; |
| 152 | } |
| 153 | |
| 154 | |
| 155 | /* |
| 156 | ftdi_set_baudrate return codes: |
| 157 | 0: all fine |
| 158 | -1: invalid baudrate |
| 159 | -2: setting baudrate failed |
| 160 | */ |
| 161 | int ftdi_set_baudrate(struct ftdi_context *ftdi, int baudrate) { |
| 162 | unsigned short ftdi_baudrate; |
| 163 | |
| 164 | if (ftdi->bitbang_enabled) { |
| 165 | baudrate = baudrate*4; |
| 166 | } |
| 167 | |
| 168 | switch (baudrate) { |
| 169 | case 300: |
| 170 | ftdi_baudrate = 0x2710; |
| 171 | break; |
| 172 | case 600: |
| 173 | ftdi_baudrate = 0x1388; |
| 174 | break; |
| 175 | case 1200: |
| 176 | ftdi_baudrate = 0x09C4; |
| 177 | break; |
| 178 | case 2400: |
| 179 | ftdi_baudrate = 0x04E2; |
| 180 | break; |
| 181 | case 4800: |
| 182 | ftdi_baudrate = 0x0271; |
| 183 | break; |
| 184 | case 9600: |
| 185 | ftdi_baudrate = 0x4138; |
| 186 | break; |
| 187 | case 19200: |
| 188 | ftdi_baudrate = 0x809C; |
| 189 | break; |
| 190 | case 38400: |
| 191 | ftdi_baudrate = 0xC04E; |
| 192 | break; |
| 193 | case 57600: |
| 194 | ftdi_baudrate = 0x0034; |
| 195 | break; |
| 196 | case 115200: |
| 197 | ftdi_baudrate = 0x001A; |
| 198 | break; |
| 199 | case 230400: |
| 200 | ftdi_baudrate = 0x000D; |
| 201 | break; |
| 202 | case 460800: |
| 203 | ftdi_baudrate = 0x4006; |
| 204 | break; |
| 205 | case 921600: |
| 206 | ftdi_baudrate = 0x8003; |
| 207 | break; |
| 208 | default: |
| 209 | ftdi->error_str = "Unknown baudrate. Note: bitbang baudrates are automatically multiplied by 4"; |
| 210 | return -1; |
| 211 | } |
| 212 | |
| 213 | if (usb_control_msg(ftdi->usb_dev, 0x40, 3, ftdi_baudrate, 0, NULL, 0, ftdi->usb_timeout) != 0) { |
| 214 | ftdi->error_str = "Setting new baudrate failed"; |
| 215 | return -2; |
| 216 | } |
| 217 | |
| 218 | ftdi->baudrate = baudrate; |
| 219 | return 0; |
| 220 | } |
| 221 | |
| 222 | |
| 223 | int ftdi_write_data(struct ftdi_context *ftdi, unsigned char *buf, int size) { |
| 224 | int ret; |
| 225 | int offset = 0; |
| 226 | while (offset < size) { |
| 227 | int write_size = ftdi->writebuffer_chunksize; |
| 228 | |
| 229 | if (offset+write_size > size) |
| 230 | write_size = size-offset; |
| 231 | |
| 232 | ret=usb_bulk_write(ftdi->usb_dev, 2, buf+offset, write_size, ftdi->usb_timeout); |
| 233 | if (ret == -1) { |
| 234 | ftdi->error_str = "bulk write failed"; |
| 235 | return -1; |
| 236 | } |
| 237 | |
| 238 | offset += write_size; |
| 239 | } |
| 240 | |
| 241 | return 0; |
| 242 | } |
| 243 | |
| 244 | |
| 245 | int ftdi_write_data_set_chunksize(struct ftdi_context *ftdi, unsigned int chunksize) { |
| 246 | ftdi->writebuffer_chunksize = chunksize; |
| 247 | return 0; |
| 248 | } |
| 249 | |
| 250 | |
| 251 | int ftdi_write_data_get_chunksize(struct ftdi_context *ftdi, unsigned int *chunksize) { |
| 252 | *chunksize = ftdi->writebuffer_chunksize; |
| 253 | return 0; |
| 254 | } |
| 255 | |
| 256 | |
| 257 | int ftdi_read_data(struct ftdi_context *ftdi, unsigned char *buf, int size) { |
| 258 | int offset = 0, ret = 1; |
| 259 | |
| 260 | // everything we want is still in the readbuffer? |
| 261 | if (size <= ftdi->readbuffer_remaining) { |
| 262 | memcpy (buf, ftdi->readbuffer+ftdi->readbuffer_offset, size); |
| 263 | |
| 264 | // Fix offsets |
| 265 | ftdi->readbuffer_remaining -= size; |
| 266 | ftdi->readbuffer_offset += size; |
| 267 | |
| 268 | // printf("Returning bytes from buffer: %d - remaining: %d\n", size, ftdi->readbuffer_remaining); |
| 269 | |
| 270 | return size; |
| 271 | } |
| 272 | |
| 273 | // something still in the readbuffer, but not enough to satisfy 'size'? |
| 274 | if (ftdi->readbuffer_remaining != 0) { |
| 275 | memcpy (buf, ftdi->readbuffer+ftdi->readbuffer_offset, ftdi->readbuffer_remaining); |
| 276 | |
| 277 | // printf("Got bytes from buffer: %d\n", ftdi->readbuffer_remaining); |
| 278 | |
| 279 | // Fix offset |
| 280 | offset += ftdi->readbuffer_remaining; |
| 281 | } |
| 282 | |
| 283 | // do the actual USB read |
| 284 | while (offset < size && ret > 0) { |
| 285 | ftdi->readbuffer_remaining = 0; |
| 286 | ftdi->readbuffer_offset = 0; |
| 287 | ret = usb_bulk_read (ftdi->usb_dev, 0x81, ftdi->readbuffer, ftdi->readbuffer_chunksize, ftdi->usb_timeout); |
| 288 | |
| 289 | if (ret == -1) { |
| 290 | ftdi->error_str = "bulk read failed"; |
| 291 | return -1; |
| 292 | } |
| 293 | |
| 294 | if (ret > 2) { |
| 295 | // skip FTDI status bytes. |
| 296 | // Maybe stored in the future to enable modem use |
| 297 | ftdi->readbuffer_offset += 2; |
| 298 | ret -= 2; |
| 299 | } else if (ret <= 2) { |
| 300 | // no more data to read? |
| 301 | return offset; |
| 302 | } |
| 303 | |
| 304 | if (ret > 0) { |
| 305 | // data still fits in buf? |
| 306 | if (offset+ret <= size) { |
| 307 | memcpy (buf+offset, ftdi->readbuffer+ftdi->readbuffer_offset, ret); |
| 308 | offset += ret; |
| 309 | |
| 310 | if (offset == size) |
| 311 | return offset; |
| 312 | } else { |
| 313 | // only copy part of the data or size <= readbuffer_chunksize |
| 314 | int part_size = size-offset; |
| 315 | memcpy (buf+offset, ftdi->readbuffer+ftdi->readbuffer_offset, part_size); |
| 316 | |
| 317 | ftdi->readbuffer_offset += part_size; |
| 318 | ftdi->readbuffer_remaining = ret-part_size; |
| 319 | offset += part_size; |
| 320 | |
| 321 | // printf("Returning part: %d - size: %d - offset: %d - ret: %d - remaining: %d\n", part_size, size, offset, ret, ftdi->readbuffer_remaining); |
| 322 | |
| 323 | return offset; |
| 324 | } |
| 325 | } |
| 326 | } |
| 327 | |
| 328 | // never reached |
| 329 | return -2; |
| 330 | } |
| 331 | |
| 332 | |
| 333 | int ftdi_read_data_set_chunksize(struct ftdi_context *ftdi, unsigned int chunksize) { |
| 334 | // Invalidate all remaining data |
| 335 | ftdi->readbuffer_offset = 0; |
| 336 | ftdi->readbuffer_remaining = 0; |
| 337 | |
| 338 | unsigned char *new_buf; |
| 339 | if ((new_buf = (unsigned char *)realloc(ftdi->readbuffer, chunksize)) == NULL) { |
| 340 | ftdi->error_str = "out of memory for readbuffer"; |
| 341 | return -1; |
| 342 | } |
| 343 | |
| 344 | ftdi->readbuffer = new_buf; |
| 345 | ftdi->readbuffer_chunksize = chunksize; |
| 346 | |
| 347 | return 0; |
| 348 | } |
| 349 | |
| 350 | |
| 351 | int ftdi_readt_data_get_chunksize(struct ftdi_context *ftdi, unsigned int *chunksize) { |
| 352 | *chunksize = ftdi->readbuffer_chunksize; |
| 353 | return 0; |
| 354 | } |
| 355 | |
| 356 | |
| 357 | |
| 358 | int ftdi_enable_bitbang(struct ftdi_context *ftdi, unsigned char bitmask) { |
| 359 | unsigned short usb_val; |
| 360 | |
| 361 | usb_val = bitmask; // low byte: bitmask |
| 362 | usb_val += 1 << 8; // high byte: enable flag |
| 363 | if (usb_control_msg(ftdi->usb_dev, 0x40, 0x0B, usb_val, 0, NULL, 0, ftdi->usb_timeout) != 0) { |
| 364 | ftdi->error_str = "Unable to enter bitbang mode. Perhaps not a BM type chip?"; |
| 365 | return -1; |
| 366 | } |
| 367 | |
| 368 | ftdi->bitbang_enabled = 1; |
| 369 | return 0; |
| 370 | } |
| 371 | |
| 372 | |
| 373 | int ftdi_disable_bitbang(struct ftdi_context *ftdi) { |
| 374 | if (usb_control_msg(ftdi->usb_dev, 0x40, 0x0B, 0, 0, NULL, 0, ftdi->usb_timeout) != 0) { |
| 375 | ftdi->error_str = "Unable to leave bitbang mode. Perhaps not a BM type chip?"; |
| 376 | return -1; |
| 377 | } |
| 378 | |
| 379 | ftdi->bitbang_enabled = 0; |
| 380 | return 0; |
| 381 | } |
| 382 | |
| 383 | |
| 384 | int ftdi_read_pins(struct ftdi_context *ftdi, unsigned char *pins) { |
| 385 | unsigned short usb_val; |
| 386 | if (usb_control_msg(ftdi->usb_dev, 0xC0, 0x0C, 0, 0, (char *)&usb_val, 1, ftdi->usb_timeout) != 1) { |
| 387 | ftdi->error_str = "Read pins failed"; |
| 388 | return -1; |
| 389 | } |
| 390 | |
| 391 | *pins = (unsigned char)usb_val; |
| 392 | return 0; |
| 393 | } |
| 394 | |
| 395 | |
| 396 | int ftdi_set_latency_timer(struct ftdi_context *ftdi, unsigned char latency) { |
| 397 | unsigned short usb_val; |
| 398 | |
| 399 | if (latency < 1) { |
| 400 | ftdi->error_str = "Latency out of range. Only valid for 1-255"; |
| 401 | return -1; |
| 402 | } |
| 403 | |
| 404 | usb_val = latency; |
| 405 | if (usb_control_msg(ftdi->usb_dev, 0x40, 0x09, usb_val, 0, NULL, 0, ftdi->usb_timeout) != 0) { |
| 406 | ftdi->error_str = "Unable to set latency timer"; |
| 407 | return -2; |
| 408 | } |
| 409 | return 0; |
| 410 | } |
| 411 | |
| 412 | |
| 413 | int ftdi_get_latency_timer(struct ftdi_context *ftdi, unsigned char *latency) { |
| 414 | unsigned short usb_val; |
| 415 | if (usb_control_msg(ftdi->usb_dev, 0xC0, 0x0A, 0, 0, (char *)&usb_val, 1, ftdi->usb_timeout) != 1) { |
| 416 | ftdi->error_str = "Reading latency timer failed"; |
| 417 | return -1; |
| 418 | } |
| 419 | |
| 420 | *latency = (unsigned char)usb_val; |
| 421 | return 0; |
| 422 | } |
| 423 | |
| 424 | |
| 425 | void ftdi_eeprom_initdefaults(struct ftdi_eeprom *eeprom) { |
| 426 | eeprom->vendor_id = 0403; |
| 427 | eeprom->product_id = 6001; |
| 428 | |
| 429 | eeprom->self_powered = 1; |
| 430 | eeprom->remote_wakeup = 1; |
| 431 | eeprom->BM_type_chip = 1; |
| 432 | |
| 433 | eeprom->in_is_isochronous = 0; |
| 434 | eeprom->out_is_isochronous = 0; |
| 435 | eeprom->suspend_pull_downs = 0; |
| 436 | |
| 437 | eeprom->use_serial = 0; |
| 438 | eeprom->change_usb_version = 0; |
| 439 | eeprom->usb_version = 200; |
| 440 | eeprom->max_power = 0; |
| 441 | |
| 442 | eeprom->manufacturer = NULL; |
| 443 | eeprom->product = NULL; |
| 444 | eeprom->serial = NULL; |
| 445 | } |
| 446 | |
| 447 | |
| 448 | /* |
| 449 | ftdi_eeprom_build return codes: |
| 450 | positive value: used eeprom size |
| 451 | -1: eeprom size (128 bytes) exceeded by custom strings |
| 452 | */ |
| 453 | int ftdi_eeprom_build(struct ftdi_eeprom *eeprom, unsigned char *output) { |
| 454 | unsigned char i, j; |
| 455 | unsigned short checksum, value; |
| 456 | unsigned char manufacturer_size = 0, product_size = 0, serial_size = 0; |
| 457 | int size_check; |
| 458 | |
| 459 | if (eeprom->manufacturer != NULL) |
| 460 | manufacturer_size = strlen(eeprom->manufacturer); |
| 461 | if (eeprom->product != NULL) |
| 462 | product_size = strlen(eeprom->product); |
| 463 | if (eeprom->serial != NULL) |
| 464 | serial_size = strlen(eeprom->serial); |
| 465 | |
| 466 | size_check = 128; // eeprom is 128 bytes |
| 467 | size_check -= 28; // 28 are always in use (fixed) |
| 468 | size_check -= manufacturer_size*2; |
| 469 | size_check -= product_size*2; |
| 470 | size_check -= serial_size*2; |
| 471 | |
| 472 | // eeprom size exceeded? |
| 473 | if (size_check < 0) |
| 474 | return (-1); |
| 475 | |
| 476 | // empty eeprom |
| 477 | memset (output, 0, 128); |
| 478 | |
| 479 | // Addr 00: Stay 00 00 |
| 480 | // Addr 02: Vendor ID |
| 481 | output[0x02] = eeprom->vendor_id; |
| 482 | output[0x03] = eeprom->vendor_id >> 8; |
| 483 | |
| 484 | // Addr 04: Product ID |
| 485 | output[0x04] = eeprom->product_id; |
| 486 | output[0x05] = eeprom->product_id >> 8; |
| 487 | |
| 488 | // Addr 06: Device release number (0400h for BM features) |
| 489 | output[0x06] = 0x00; |
| 490 | |
| 491 | if (eeprom->BM_type_chip == 1) |
| 492 | output[0x07] = 0x04; |
| 493 | else |
| 494 | output[0x07] = 0x02; |
| 495 | |
| 496 | // Addr 08: Config descriptor |
| 497 | // Bit 1: remote wakeup if 1 |
| 498 | // Bit 0: self powered if 1 |
| 499 | // |
| 500 | j = 0; |
| 501 | if (eeprom->self_powered == 1) |
| 502 | j = j | 1; |
| 503 | if (eeprom->remote_wakeup == 1) |
| 504 | j = j | 2; |
| 505 | output[0x08] = j; |
| 506 | |
| 507 | // Addr 09: Max power consumption: max power = value * 2 mA |
| 508 | output[0x09] = eeprom->max_power;; |
| 509 | |
| 510 | // Addr 0A: Chip configuration |
| 511 | // Bit 7: 0 - reserved |
| 512 | // Bit 6: 0 - reserved |
| 513 | // Bit 5: 0 - reserved |
| 514 | // Bit 4: 1 - Change USB version |
| 515 | // Bit 3: 1 - Use the serial number string |
| 516 | // Bit 2: 1 - Enable suspend pull downs for lower power |
| 517 | // Bit 1: 1 - Out EndPoint is Isochronous |
| 518 | // Bit 0: 1 - In EndPoint is Isochronous |
| 519 | // |
| 520 | j = 0; |
| 521 | if (eeprom->in_is_isochronous == 1) |
| 522 | j = j | 1; |
| 523 | if (eeprom->out_is_isochronous == 1) |
| 524 | j = j | 2; |
| 525 | if (eeprom->suspend_pull_downs == 1) |
| 526 | j = j | 4; |
| 527 | if (eeprom->use_serial == 1) |
| 528 | j = j | 8; |
| 529 | if (eeprom->change_usb_version == 1) |
| 530 | j = j | 16; |
| 531 | output[0x0A] = j; |
| 532 | |
| 533 | // Addr 0B: reserved |
| 534 | output[0x0B] = 0x00; |
| 535 | |
| 536 | // Addr 0C: USB version low byte when 0x0A bit 4 is set |
| 537 | // Addr 0D: USB version high byte when 0x0A bit 4 is set |
| 538 | if (eeprom->change_usb_version == 1) { |
| 539 | output[0x0C] = eeprom->usb_version; |
| 540 | output[0x0D] = eeprom->usb_version >> 8; |
| 541 | } |
| 542 | |
| 543 | |
| 544 | // Addr 0E: Offset of the manufacturer string + 0x80 |
| 545 | output[0x0E] = 0x14 + 0x80; |
| 546 | |
| 547 | // Addr 0F: Length of manufacturer string |
| 548 | output[0x0F] = manufacturer_size*2 + 2; |
| 549 | |
| 550 | // Addr 10: Offset of the product string + 0x80, calculated later |
| 551 | // Addr 11: Length of product string |
| 552 | output[0x11] = product_size*2 + 2; |
| 553 | |
| 554 | // Addr 12: Offset of the serial string + 0x80, calculated later |
| 555 | // Addr 13: Length of serial string |
| 556 | output[0x13] = serial_size*2 + 2; |
| 557 | |
| 558 | // Dynamic content |
| 559 | output[0x14] = manufacturer_size*2 + 2; |
| 560 | output[0x15] = 0x03; // type: string |
| 561 | |
| 562 | i = 0x16, j = 0; |
| 563 | |
| 564 | // Output manufacturer |
| 565 | for (j = 0; j < manufacturer_size; j++) { |
| 566 | output[i] = eeprom->manufacturer[j], i++; |
| 567 | output[i] = 0x00, i++; |
| 568 | } |
| 569 | |
| 570 | // Output product name |
| 571 | output[0x10] = i + 0x80; // calculate offset |
| 572 | output[i] = product_size*2 + 2, i++; |
| 573 | output[i] = 0x03, i++; |
| 574 | for (j = 0; j < product_size; j++) { |
| 575 | output[i] = eeprom->product[j], i++; |
| 576 | output[i] = 0x00, i++; |
| 577 | } |
| 578 | |
| 579 | // Output serial |
| 580 | output[0x12] = i + 0x80; // calculate offset |
| 581 | output[i] = serial_size*2 + 2, i++; |
| 582 | output[i] = 0x03, i++; |
| 583 | for (j = 0; j < serial_size; j++) { |
| 584 | output[i] = eeprom->serial[j], i++; |
| 585 | output[i] = 0x00, i++; |
| 586 | } |
| 587 | |
| 588 | // calculate checksum |
| 589 | checksum = 0xAAAA; |
| 590 | |
| 591 | for (i = 0; i < 63; i++) { |
| 592 | value = output[i*2]; |
| 593 | value += output[(i*2)+1] << 8; |
| 594 | |
| 595 | checksum = value^checksum; |
| 596 | checksum = (checksum << 1) | (checksum >> 15); |
| 597 | } |
| 598 | |
| 599 | output[0x7E] = checksum; |
| 600 | output[0x7F] = checksum >> 8; |
| 601 | |
| 602 | return size_check; |
| 603 | } |
| 604 | |
| 605 | |
| 606 | int ftdi_read_eeprom(struct ftdi_context *ftdi, unsigned char *eeprom) { |
| 607 | int i; |
| 608 | |
| 609 | for (i = 0; i < 64; i++) { |
| 610 | if (usb_control_msg(ftdi->usb_dev, 0xC0, 0x90, 0, i, eeprom+(i*2), 2, ftdi->usb_timeout) != 2) { |
| 611 | ftdi->error_str = "Reading eeprom failed"; |
| 612 | return -1; |
| 613 | } |
| 614 | } |
| 615 | |
| 616 | return 0; |
| 617 | } |
| 618 | |
| 619 | |
| 620 | int ftdi_write_eeprom(struct ftdi_context *ftdi, unsigned char *eeprom) { |
| 621 | unsigned short usb_val; |
| 622 | int i; |
| 623 | |
| 624 | for (i = 0; i < 64; i++) { |
| 625 | usb_val = eeprom[i*2]; |
| 626 | usb_val += eeprom[(i*2)+1] << 8; |
| 627 | if (usb_control_msg(ftdi->usb_dev, 0x40, 0x91, usb_val, i, NULL, 0, ftdi->usb_timeout) != 0) { |
| 628 | ftdi->error_str = "Unable to write eeprom"; |
| 629 | return -1; |
| 630 | } |
| 631 | } |
| 632 | |
| 633 | return 0; |
| 634 | } |
| 635 | |
| 636 | |
| 637 | int ftdi_erase_eeprom(struct ftdi_context *ftdi) { |
| 638 | if (usb_control_msg(ftdi->usb_dev, 0x40, 0x92, 0, 0, NULL, 0, ftdi->usb_timeout) != 0) { |
| 639 | ftdi->error_str = "Unable to erase eeprom"; |
| 640 | return -1; |
| 641 | } |
| 642 | |
| 643 | return 0; |
| 644 | } |