| 1 | #! /bin/sh |
| 2 | # |
| 3 | # cvs.sh |
| 4 | # |
| 5 | # This file contains support code from Makefile.common |
| 6 | # It defines a shell function for each known target |
| 7 | # and then does a case to call the correct function. |
| 8 | |
| 9 | call_and_fix_autoconf() |
| 10 | { |
| 11 | $AUTOCONF || exit 1 |
| 12 | if test -r configure.in.in ; then |
| 13 | perl -pi -e "print \"if test \\\"x\\\$with_fast_perl\\\" = \\\"xyes\\\"; then\ |
| 14 | \\n perl -i.bak \\\$ac_aux_dir/conf.change.pl \\\$CONFIG_STATUS\ |
| 15 | \\\\\\n || mv \\\$CONFIG_STATUS.bak \\\$CONFIG_STATUS\ |
| 16 | \\n rm -f \\\$CONFIG_STATUS.bak\\nfi\ |
| 17 | \\n\" if /^\\s*chmod\\s+.*\\+x\\s+.*CONFIG_STATUS/;" configure |
| 18 | fi |
| 19 | } |
| 20 | |
| 21 | strip_makefile() |
| 22 | { |
| 23 | if test -f $makefile_wo; then :; else |
| 24 | perl -e '$in=0; while ( <> ) { $in = 1 if ($_=~ m/^if /); print $_ unless ($in); $in = 0 if ($_ =~ m/^endif/); }' < Makefile.am.in > $makefile_wo |
| 25 | fi |
| 26 | } |
| 27 | |
| 28 | check_autotool_versions() |
| 29 | { |
| 30 | AUTOCONF_VERSION=`$AUTOCONF --version | head -1` |
| 31 | case $AUTOCONF_VERSION in |
| 32 | Autoconf*2.5* | autoconf*2.5* ) : ;; |
| 33 | "" ) |
| 34 | echo "*** AUTOCONF NOT FOUND!." |
| 35 | echo "*** KDE requires autoconf 2.52, 2.53 or 2.54" |
| 36 | exit 1 |
| 37 | ;; |
| 38 | * ) |
| 39 | echo "*** YOU'RE USING $AUTOCONF_VERSION." |
| 40 | echo "*** KDE requires autoconf 2.52, 2.53 or 2.54" |
| 41 | exit 1 |
| 42 | ;; |
| 43 | esac |
| 44 | |
| 45 | AUTOHEADER_VERSION=`$AUTOHEADER --version | head -1` |
| 46 | case $AUTOHEADER_VERSION in |
| 47 | Autoconf*2.5* | autoheader*2.5* ) : ;; |
| 48 | "" ) |
| 49 | echo "*** AUTOHEADER NOT FOUND!." |
| 50 | echo "*** KDE requires autoheader 2.52 or 2.53 (part of autoconf)" |
| 51 | exit 1 |
| 52 | ;; |
| 53 | * ) |
| 54 | echo "*** YOU'RE USING $AUTOHEADER_VERSION." |
| 55 | echo "*** KDE requires autoheader 2.52 or 2.53 (part of autoconf)" |
| 56 | exit 1 |
| 57 | ;; |
| 58 | esac |
| 59 | |
| 60 | AUTOMAKE_STRING=`$AUTOMAKE --version | head -1` |
| 61 | case $AUTOMAKE_STRING in |
| 62 | automake*1.5d* ) |
| 63 | echo "*** YOU'RE USING $AUTOMAKE_STRING." |
| 64 | echo "*** KDE requires automake 1.5" |
| 65 | exit 1 |
| 66 | ;; |
| 67 | automake*1.5* | automake*1.5-* | automake*1.6.* | automake*1.7* ) : ;; |
| 68 | "" ) |
| 69 | echo "*** AUTOMAKE NOT FOUND!." |
| 70 | echo "*** KDE requires automake 1.5" |
| 71 | exit 1 |
| 72 | ;; |
| 73 | unsermake* ) : |
| 74 | echo "*** YOU'RE USING UNSERMAKE." |
| 75 | echo "*** GOOD LUCK!! :)" |
| 76 | ;; |
| 77 | * ) |
| 78 | echo "*** YOU'RE USING $AUTOMAKE_STRING." |
| 79 | echo "*** KDE requires automake 1.5" |
| 80 | exit 1 |
| 81 | ;; |
| 82 | esac |
| 83 | } |
| 84 | |
| 85 | cvs() |
| 86 | { |
| 87 | check_autotool_versions |
| 88 | |
| 89 | ### Produce acinclude.m4 |
| 90 | if grep '\$(top_srcdir)/acinclude.m4:' $makefile_am >/dev/null; then |
| 91 | echo "*** Creating acinclude.m4" |
| 92 | rm -f acinclude.m4 configure.files |
| 93 | |
| 94 | strip_makefile |
| 95 | $MAKE -f $makefile_wo top_srcdir=. ./acinclude.m4 |
| 96 | fi |
| 97 | |
| 98 | ### Make new subdirs and configure.in. |
| 99 | ### The make calls could be optimized away here, |
| 100 | ### with a little thought. |
| 101 | if test -r configure.in.in; then |
| 102 | rm -f subdirs configure.in |
| 103 | echo "*** Creating list of subdirectories" |
| 104 | subdirs |
| 105 | echo "*** Creating configure.in" |
| 106 | configure_files |
| 107 | strip_makefile |
| 108 | $MAKE -f $makefile_wo top_srcdir=. ./configure.in || exit 1 |
| 109 | fi |
| 110 | |
| 111 | echo "*** Creating aclocal.m4" |
| 112 | $ACLOCAL || exit 1 |
| 113 | echo "*** Creating configure" |
| 114 | call_and_fix_autoconf |
| 115 | |
| 116 | if egrep "^AM_CONFIG_HEADER" configure.in >/dev/null 2>&1; then |
| 117 | echo "*** Creating config.h template" |
| 118 | $AUTOHEADER || exit 1 |
| 119 | fi |
| 120 | |
| 121 | echo "*** Creating Makefile templates" |
| 122 | $AUTOMAKE || exit 1 |
| 123 | if test -z "$UNSERMAKE"; then |
| 124 | echo "*** Postprocessing Makefile templates" |
| 125 | perl -w admin/am_edit || exit 1 |
| 126 | fi |
| 127 | |
| 128 | if egrep "^cvs-local:" $makefile_am >/dev/null; then \ |
| 129 | strip_makefile |
| 130 | $MAKE -f $makefile_wo cvs-local top_srcdir=. || exit 1 |
| 131 | fi |
| 132 | |
| 133 | echo "*** Creating date/time stamp" |
| 134 | touch stamp-h.in |
| 135 | |
| 136 | echo "*** Finished" |
| 137 | echo " Don't forget to run ./configure" |
| 138 | echo " If you haven't done so in a while, run ./configure --help" |
| 139 | } |
| 140 | |
| 141 | dist() |
| 142 | { |
| 143 | check_autotool_versions |
| 144 | |
| 145 | ### |
| 146 | ### First build all of the files necessary to do just "make" |
| 147 | ### |
| 148 | if grep '\$(top_srcdir)/acinclude.m4:' $makefile_am >/dev/null; then |
| 149 | strip_makefile |
| 150 | $MAKE -f $makefile_wo top_srcdir=. ./acinclude.m4 |
| 151 | fi |
| 152 | if test -r configure.in.in; then |
| 153 | subdirs |
| 154 | configure_files |
| 155 | strip_makefile |
| 156 | $MAKE -f $makefile_wo top_srcdir=. ./configure.in |
| 157 | fi |
| 158 | $ACLOCAL |
| 159 | $AUTOHEADER |
| 160 | $AUTOMAKE --foreign --include-deps |
| 161 | perl -w admin/am_edit |
| 162 | call_and_fix_autoconf |
| 163 | touch stamp-h.in |
| 164 | if grep "^cvs-local:" $makefile_am >/dev/null; then |
| 165 | strip_makefile |
| 166 | $MAKE -f $makefile_wo cvs-local top_srcdir=. |
| 167 | fi |
| 168 | |
| 169 | ### |
| 170 | ### Then make messages |
| 171 | ### |
| 172 | if test -d po; then |
| 173 | LIST=`find ./po -name "*.po"` |
| 174 | for i in $LIST; do |
| 175 | file2=`echo $i | sed -e "s#\.po#\.gmo#"` |
| 176 | msgfmt -o $file2 $i || touch $file2 |
| 177 | done |
| 178 | fi |
| 179 | if grep "^cvs-dist-local:" $makefile_am >/dev/null; then |
| 180 | strip_makefile |
| 181 | $MAKE -f $makefile_wo cvs-dist-local top_srcdir=. |
| 182 | fi |
| 183 | } |
| 184 | |
| 185 | subdir_dist() |
| 186 | { |
| 187 | $ACLOCAL |
| 188 | $AUTOHEADER |
| 189 | $AUTOMAKE --foreign --include-deps |
| 190 | perl -w ../admin/am_edit |
| 191 | call_and_fix_autoconf |
| 192 | } |
| 193 | |
| 194 | configure_in() |
| 195 | { |
| 196 | rm -f configure.in configure.in.new |
| 197 | kde_use_qt_param= |
| 198 | test -f configure.files || { echo "need configure.files for configure.in"; exit 1; } |
| 199 | cat `egrep -v "configure.in.bot" < configure.files` > configure.in.new |
| 200 | echo "KDE_CREATE_SUBDIRSLIST" >> configure.in.new |
| 201 | if test -f Makefile.am.in; then |
| 202 | subdirs=`cat subdirs` |
| 203 | for dir in $subdirs; do |
| 204 | dir=`echo $dir | sed -e "s,[-+.],_,g"` |
| 205 | echo "AM_CONDITIONAL($dir""_SUBDIR_included, test \"x\$$dir""_SUBDIR_included\" = xyes)" >> configure.in.new |
| 206 | done |
| 207 | fi |
| 208 | # echo "AC_OUTPUT( \\" >> configure.in.new |
| 209 | mfs=`find . -type d -print | fgrep -v "/." | \ |
| 210 | sed -e "s#\./##" -e "/^debian/d" | sort` |
| 211 | for i in $mfs; do |
| 212 | topleveldir=`echo $i| sed -e "s#/.*##"` |
| 213 | if test -f $topleveldir/configure.in; then |
| 214 | continue |
| 215 | fi |
| 216 | if test -f $i/Makefile.am; then :; else |
| 217 | continue |
| 218 | fi |
| 219 | if test -s inst-apps; then |
| 220 | if grep "\"^$topleveldir\"" inst-apps > /dev/null 2>&1; then |
| 221 | continue |
| 222 | fi |
| 223 | fi |
| 224 | if test "$i" = "."; then |
| 225 | echo "AC_CONFIG_FILES([ Makefile ])" >> configure.in.new |
| 226 | else |
| 227 | echo "AC_CONFIG_FILES([ $i/Makefile ])" >> configure.in.new |
| 228 | fi |
| 229 | if test -n "$UNSERMAKE"; then |
| 230 | if test "$i" = "."; then |
| 231 | echo "AC_CONFIG_FILES([ Makefile.rules ])" >> configure.in.new |
| 232 | else |
| 233 | echo "AC_CONFIG_FILES([ $i/Makefile.rules ])" >> configure.in.new |
| 234 | fi |
| 235 | fi |
| 236 | done |
| 237 | |
| 238 | files=`cat configure.files` |
| 239 | list=`egrep '^dnl AC_OUTPUT\(.*\)' $files | sed -e "s#^.*dnl AC_OUTPUT(\(.*\))#\1#"` |
| 240 | for file in $list; do |
| 241 | echo "AC_CONFIG_FILES([ $file ])" >> configure.in.new |
| 242 | done |
| 243 | |
| 244 | if test -n "$UNSERMAKE"; then |
| 245 | echo "AC_CONFIG_FILES([ MakeVars ])" >> configure.in.new |
| 246 | fi |
| 247 | echo "AC_OUTPUT" >> configure.in.new |
| 248 | modulename= |
| 249 | if test -f configure.in.in; then |
| 250 | if head -2 configure.in.in | egrep "^#MIN_CONFIG\(.*\)$" > /dev/null; then |
| 251 | kde_use_qt_param=`cat configure.in.in | sed -n -e "s/#MIN_CONFIG(\(.*\))/\1/p"` |
| 252 | fi |
| 253 | if head -2 configure.in.in | egrep "^#MIN_CONFIG" > /dev/null; then |
| 254 | line=`grep "^AM_INIT_AUTOMAKE(" configure.in.in` |
| 255 | if test -n "$line"; then |
| 256 | modulename=`echo $line | sed -e "s#AM_INIT_AUTOMAKE(\([^,]*\),.*#\1#"` |
| 257 | VERSION=`echo $line | sed -e "s#AM_INIT_AUTOMAKE([^,]*, *\([^)]*\)).*#\1#"` |
| 258 | fi |
| 259 | sed -e "s#AM_INIT_AUTOMAKE([^@].*#dnl PACKAGE set before#" \ |
| 260 | configure.in.new > configure.in && mv configure.in configure.in.new |
| 261 | fi |
| 262 | fi |
| 263 | if test -z "$VERSION" || test "$VERSION" = "@VERSION@"; then |
| 264 | VERSION="\"3.1.0\"" |
| 265 | fi |
| 266 | if test -z "$modulename" || test "$modulename" = "@MODULENAME@"; then |
| 267 | modulename=`pwd`; |
| 268 | modulename=`basename $modulename` |
| 269 | esc_VERSION=`echo $VERSION | sed -e "s#[^.0-9a-zA-Z]##g"` |
| 270 | modulename=`echo $modulename | sed -e "s#-$esc_VERSION##"` |
| 271 | |
| 272 | fi |
| 273 | if test -n "$kde_use_qt_param"; then |
| 274 | sed -e "s#^dnl KDE_USE_QT#KDE_USE_QT($kde_use_qt_param)#" \ |
| 275 | configure.in.new > configure.in && mv configure.in configure.in.new |
| 276 | fi |
| 277 | sed -e "s#@MODULENAME@#$modulename#" configure.in.new | |
| 278 | sed -e "s#@VERSION@#$VERSION#" > configure.in |
| 279 | botfiles=`cat configure.files | egrep "configure.in.bot"` |
| 280 | test -n "$botfiles" && cat $botfiles >> configure.in |
| 281 | cat $admindir/configure.in.bot.end >> configure.in |
| 282 | rm -f configure.in.new |
| 283 | } |
| 284 | |
| 285 | configure_files() |
| 286 | { |
| 287 | admindir=NO |
| 288 | for i in . .. ../.. ../../..; do |
| 289 | if test -x $i/admin; then admindir=$i/admin; break; fi |
| 290 | done |
| 291 | rm -f configure.files |
| 292 | touch configure.files |
| 293 | if test -f configure.in.in && head -2 configure.in.in | grep "^#MIN_CONFIG" > /dev/null; then |
| 294 | echo $admindir/configure.in.min >> configure.files |
| 295 | fi |
| 296 | test -f configure.in.in && echo configure.in.in >> configure.files |
| 297 | list=`find . -name "configure.in.in" -o -name "configure.in.bot" | sort` |
| 298 | for i in $list; do if test -f $i && test `dirname $i` != "." ; then |
| 299 | echo $i >> configure.files |
| 300 | fi; done |
| 301 | test -f configure.in.mid && echo configure.in.mid >> configure.files |
| 302 | test -f configure.in.bot && echo configure.in.bot >> configure.files |
| 303 | } |
| 304 | |
| 305 | subdirs() |
| 306 | { |
| 307 | dirs= |
| 308 | compilefirst=`sed -ne 's#^COMPILE_FIRST[ ]*=[ ]*##p' $makefile_am | head -1` |
| 309 | compilelast=`sed -ne 's#^COMPILE_LAST[ ]*=[ ]*##p' $makefile_am | head -1` |
| 310 | for i in `ls -1`; do |
| 311 | if test -f $i/Makefile.am; then |
| 312 | case " $compilefirst $compilelast " in |
| 313 | *" $i "*) ;; |
| 314 | *) dirs="$dirs $i" |
| 315 | esac |
| 316 | fi |
| 317 | done |
| 318 | |
| 319 | : > ./_SUBDIRS |
| 320 | |
| 321 | for d in $compilefirst; do |
| 322 | echo $d >> ./_SUBDIRS |
| 323 | done |
| 324 | |
| 325 | (for d in $dirs; do |
| 326 | list=`sed -ne "s#^COMPILE_BEFORE_$d""[ ]*=[ ]*##p" $makefile_am | head -1` |
| 327 | for s in $list; do |
| 328 | echo $s $d |
| 329 | done |
| 330 | list=`sed -ne "s#^COMPILE_AFTER_$d""[ ]*=[ ]*##p" $makefile_am | head -1` |
| 331 | for s in $list; do |
| 332 | echo $d $s |
| 333 | done |
| 334 | echo $d $d |
| 335 | done ) | tsort >> ./_SUBDIRS |
| 336 | |
| 337 | for d in $compilelast; do |
| 338 | echo $d >> ./_SUBDIRS |
| 339 | done |
| 340 | |
| 341 | if test -f Makefile.am.in; then |
| 342 | cp Makefile.am.in Makefile.am |
| 343 | if test -n "$UNSERMAKE"; then |
| 344 | topsubdirs= |
| 345 | for i in $compilefirst $dirs $compilelast; do |
| 346 | vari=`echo $i | sed -e "s,[-+],_,g"` |
| 347 | echo "if $vari""_SUBDIR_included" >> Makefile.am |
| 348 | echo "$vari""_SUBDIR=$i" >> Makefile.am |
| 349 | echo "endif" >> Makefile.am |
| 350 | topsubdirs="$topsubdirs \$($vari""_SUBDIR)" |
| 351 | done |
| 352 | echo "SUBDIRS=$topsubdirs" >> Makefile.am |
| 353 | else |
| 354 | echo "SUBDIRS="'$(TOPSUBDIRS)' >> Makefile.am |
| 355 | fi |
| 356 | fi |
| 357 | if test -r subdirs && diff subdirs _SUBDIRS > /dev/null; then |
| 358 | rm -f _SUBDIRS |
| 359 | fi |
| 360 | test -r _SUBDIRS && mv _SUBDIRS subdirs || true |
| 361 | } |
| 362 | |
| 363 | cvs_clean() |
| 364 | { |
| 365 | if test -d CVS; then :; else |
| 366 | echo "You don't have a toplevel CVS directory." |
| 367 | echo "You most certainly didn't use cvs to get these sources." |
| 368 | echo "But this function depends on cvs's information." |
| 369 | exit 1 |
| 370 | fi |
| 371 | perl $admindir/cvs-clean.pl |
| 372 | } |
| 373 | |
| 374 | package_merge() |
| 375 | { |
| 376 | catalogs=$POFILES |
| 377 | for cat in $catalogs; do |
| 378 | msgmerge -o $cat.new $cat $PACKAGE.pot |
| 379 | if test -s $cat.new; then |
| 380 | grep -v "\"POT-Creation" $cat.new > $cat.new.2 |
| 381 | grep -v "\"POT-Creation" $cat >> $cat.new.1 |
| 382 | if diff $cat.new.1 $cat.new.2; then |
| 383 | rm $cat.new |
| 384 | else |
| 385 | mv $cat.new $cat |
| 386 | fi |
| 387 | rm -f $cat.new.1 $cat.new.2 |
| 388 | fi |
| 389 | done |
| 390 | } |
| 391 | |
| 392 | package_messages() |
| 393 | { |
| 394 | rm -rf po.backup |
| 395 | mkdir po.backup |
| 396 | |
| 397 | for i in `ls -1 po/*.pot 2>/dev/null | sed -e "s#po/##"`; do |
| 398 | egrep -v '^#([^:]|$)' po/$i | egrep '^.*[^ ]+.*$' | grep -v "\"POT-Creation" > po.backup/$i |
| 399 | cp po/$i po.backup/backup_$i |
| 400 | touch -r po/$i po.backup/backup_$i |
| 401 | rm po/$i |
| 402 | done |
| 403 | |
| 404 | podir=${podir:-$PWD/po} |
| 405 | files=`find . -name Makefile.am | xargs egrep -l '^messages:' ` |
| 406 | dirs=`for i in $files; do echo \`dirname $i\`; done` |
| 407 | tmpname="$PWD/messages.log" |
| 408 | if test -z "$EXTRACTRC"; then EXTRACTRC=extractrc ; fi |
| 409 | if test -z "$PREPARETIPS"; then PREPARETIPS=preparetips ; fi |
| 410 | export EXTRACTRC PREPARETIPS |
| 411 | |
| 412 | for subdir in $dirs; do |
| 413 | test -z "$VERBOSE" || echo "Making messages in $subdir" |
| 414 | (cd $subdir |
| 415 | if test -n "`grep -e '^messages:.*rc.cpp' Makefile.am`"; then |
| 416 | $EXTRACTRC *.rc *.ui > rc.cpp |
| 417 | else |
| 418 | candidates=`ls -1 *.rc *.ui 2>/dev/null` |
| 419 | if test -n "$candidates"; then |
| 420 | echo "$subdir has *.rc or *.ui files, but not correct messages line" |
| 421 | fi |
| 422 | fi |
| 423 | if test -n "`grep -r KAboutData *.c* *.C* 2>/dev/null`"; then |
| 424 | echo -e 'i18n("_: NAME OF TRANSLATORS\\n"\n"Your names")\ni18n("_: EMAIL OF TRANSLATORS\\n"\n"Your emails")' > _translatorinfo.cpp |
| 425 | else echo " " > _translatorinfo.cpp |
| 426 | fi |
| 427 | perl -e '$mes=0; while (<STDIN>) { next if (/^(if|else|endif)\s/); if (/^messages:/) { $mes=1; print $_; next; } if ($mes) { if (/$\\(XGETTEXT\)/ && / -o/) { s/ -o \$\(podir\)/ _translatorinfo.cpp -o \$\(podir\)/ } print $_; } else { print $_; } }' < Makefile.am | egrep -v '^include ' > _transMakefile |
| 428 | |
| 429 | $MAKE -s -f _transMakefile podir=$podir EXTRACTRC="$EXTRACTRC" PREPARETIPS="$PREPARETIPS" \ |
| 430 | XGETTEXT="${XGETTEXT:-xgettext} -C -ki18n -ktr2i18n -kI18N_NOOP -ktranslate -kaliasLocale -x ${includedir:-$KDEDIR/include}/kde.pot" \ |
| 431 | messages |
| 432 | ) 2>&1 | grep -v '^make\[1\]' > $tmpname |
| 433 | test -s $tmpname && { echo $subdir ; cat "$tmpname"; } |
| 434 | test -f $subdir/rc.cpp && rm -f $subdir/rc.cpp |
| 435 | rm -f $subdir/_translatorinfo.cpp |
| 436 | rm -f $subdir/_transMakefile |
| 437 | done |
| 438 | rm -f $tmpname |
| 439 | for i in `ls -1 po.backup/*.pot 2>/dev/null | sed -e "s#po.backup/##" | egrep -v '^backup_'`; do |
| 440 | test -f po/$i || echo "disappeared: $i" |
| 441 | done |
| 442 | for i in `ls -1 po/*.pot 2>/dev/null | sed -e "s#po/##"`; do |
| 443 | msgmerge -q -o po/$i po/$i po/$i |
| 444 | egrep -v '^#([^:]|$)' po/$i | egrep '^.*[^ ]+.*$' | grep -v "\"POT-Creation" > temp.pot |
| 445 | if test -f po.backup/$i && test -n "`diff temp.pot po.backup/$i`"; then |
| 446 | echo "will update $i" |
| 447 | msgmerge -q po.backup/backup_$i po/$i > temp.pot |
| 448 | mv temp.pot po/$i |
| 449 | else |
| 450 | if test -f po.backup/backup_$i; then |
| 451 | test -z "$VERBOSE" || echo "I'm restoring $i" |
| 452 | mv po.backup/backup_$i po/$i |
| 453 | rm po.backup/$i |
| 454 | else |
| 455 | echo "will add $i" |
| 456 | fi |
| 457 | fi |
| 458 | done |
| 459 | rm -f temp.pot |
| 460 | rm -rf po.backup |
| 461 | } |
| 462 | |
| 463 | admindir=`echo "$0" | sed 's%[\\/][^\\/][^\\/]*$%%'` |
| 464 | test "x$admindir" = "x$0" && admindir=. |
| 465 | |
| 466 | test "x$MAKE" = x && MAKE=make |
| 467 | makefile_am=Makefile.am |
| 468 | makefile_wo=Makefile.am |
| 469 | if test -f Makefile.am.in; then |
| 470 | makefile_am=Makefile.am.in |
| 471 | makefile_wo=Makefile.am.in.wo |
| 472 | fi |
| 473 | |
| 474 | # Suck in the AUTOCONF detection code |
| 475 | . $admindir/detect-autoconf.sh |
| 476 | |
| 477 | ### |
| 478 | ### Main |
| 479 | ### |
| 480 | |
| 481 | arg=`echo $1 | tr '\-.' __` |
| 482 | case $arg in |
| 483 | cvs | dist | subdir_dist | configure_in | configure_files | subdirs | \ |
| 484 | cvs_clean | package_merge | package_messages ) $arg ;; |
| 485 | * ) echo "Usage: cvs.sh <target>" |
| 486 | echo "Target can be one of:" |
| 487 | echo " cvs cvs-clean dist" |
| 488 | echo " configure.in configure.files" |
| 489 | echo " package-merge package-messages" |
| 490 | echo "" |
| 491 | echo "Usage: anything but $1" |
| 492 | exit 1 ;; |
| 493 | esac |
| 494 | |
| 495 | if test -f Makefile.am.in.wo; then |
| 496 | rm Makefile.am.in.wo |
| 497 | fi |
| 498 | |
| 499 | exit 0 |