Commit | Line | Data |
---|---|---|
e0d59256 H |
1 | #see http://developer.intra2net.com/git/?p=libftdi;a=blob;f=src/ftdi.c |
2 | #and http://developer.intra2net.com/git/?p=libftdi;a=blob;f=src/ftdi.h | |
3 | #and http://developer.intra2net.com/git/?p=libftdi;a=tree;f=ftdi_eeprom | |
4 | #and http://developer.intra2net.com/git/?p=libftdi;a=blob;f=ftdi_eeprom/example.conf | |
5 | #and http://developer.intra2net.com/git/?p=libftdi;a=blob;f=ftdi_eeprom/main.c | |
673ca433 | 6 | |
e0d59256 H |
7 | ############ |
8 | # Filename # | |
9 | ############ | |
10 | filename=eeprom.new # Filename of the EE file to be generated. Leave empty to skip file writing | |
11 | #flash_raw=false # Boolean: | |
12 | ||
13 | ## Include another config file? | |
14 | #include | |
15 | ||
16 | ############ | |
17 | # IDs # | |
18 | ############ | |
19 | vendor_id="0x0403" # Integer: Vendor ID. FT245R factory default 0x0403 | |
20 | product_id="0x6001" # Integer: Product ID. FT245R factory default 0x6001 | |
21 | ||
22 | ############################## | |
23 | # Device and Serial Strings # | |
24 | ############################## | |
25 | manufacturer="ACME Inc" # String: Manufacturer. FT245R factory default FTDI | |
26 | product="USB Serial Converter" # String: Product. FT245R factory default FT245R USB FIFO | |
27 | serial="08-15" # String: Serial"number". FT245R factory default (sample chip) A9082P2B | |
28 | use_serial=true # Boolean: Use the serial number string | |
29 | ||
30 | ############ | |
31 | # Options # | |
32 | ############ | |
33 | max_power=500 # Integer: Max. power consumption: value * 2 mA(?). Use 0 if self_powered = true. FT245R factory default 90 | |
34 | self_powered=false # Boolean: Turn this off for bus powered | |
35 | remote_wakeup=true # Boolean: Turn this on for remote wakeup feature | |
36 | ||
37 | # Normally you don't have to change one of these flags | |
38 | #in_is_isochronous=false # Boolean: In Endpoint is Isochronous | |
39 | #out_is_isochronous=false # Boolean: Out Endpoint is Isochronous | |
40 | #suspend_pull_downs=false # Boolean: Enable suspend pull downs for lower power | |
41 | #change_usb_version=false # Boolean: Change USB Version | |
42 | #usb_version=0x00 # Integer: Only used when change_usb_version is enabled | |
43 | ||
44 | #default_pid=0x6001 # Integer: Default Pid. | |
45 | ||
46 | #eeprom_type # Integer: Chip Type / EEPROM Type. Corresponds to ftdi_chip_type struct in ftdi.h | |
47 | #high_current=false # Boolean: High Current Drive | |
48 | ||
49 | ##Type_R chips | |
add00ad6 | 50 | # Only used on FT-R chips (when omitted, use chip defaults) |
e0d59256 H |
51 | # Possible values correspond to enum ftdi_cbus_func in ftdi.h and strings are defined in function parse_cbus in ftdi_eeprom/main.c |
52 | # Values in the struct are (see current ftid.h for an up to date list): | |
53 | # CBUS_TXDEN = 0, CBUS_PWREN = 1, CBUS_RXLED = 2, CBUS_TXLED = 3, CBUS_TXRXLED = 4, CBUS_SLEEP = 5, CBUS_CLK48 = 6, CBUS_CLK24 = 7, CBUS_CLK12 = 8, CBUS_CLK6 = 9, CBUS_IOMODE = 0xa, CBUS_BB_WR = 0xb, CBUS_BB_RD = 0xc | |
54 | # Strings to be used here are: | |
55 | # "TXDEN", "PWREN", "RXLED", "TXLED", "TXRXLED", "SLEEP", "CLK48", "CLK24", "CLK12", "CLK6", "IOMODE", "BB_WR", "BB_RD" | |
56 | cbus0=TXLED # String parsed to integer: FT245R factory default TXLED | |
57 | cbus1=RXLED # String parsed to integer: FT245R factory default RXLED | |
58 | cbus2=TXDEN # String parsed to integer: FT245R factory default TXDEN | |
59 | cbus3=PWREN # String parsed to integer: FT245R factory default PWREN | |
60 | cbus4=SLEEP # String parsed to integer: FT245R factory default SLEEP | |
61 | ||
62 | ## Only used on FT232H chips (when omitted, use chip defaults) | |
63 | # Possible values correspond to enum ftdi_cbush_func in ftdi.h and strings are defined in function parse_cbush in ftdi_eeprom/main.c. | |
64 | # Values are (see current ftid.h for an up to date list): | |
65 | # CBUSH_TRISTATE = 0, CBUSH_TXLED = 1, CBUSH_RXLED = 2, CBUSH_TXRXLED = 3, CBUSH_PWREN = 4, CBUSH_SLEEP = 5, CBUSH_DRIVE_0 = 6, CBUSH_DRIVE1 = 7, CBUSH_IOMODE = 8, CBUSH_TXDEN = 9, CBUSH_CLK30 = 10, CBUSH_CLK15 = 11, CBUSH_CLK7_5 = 12 | |
66 | # Strings to be used in this config file are: | |
67 | # "TRISTATE", "TXLED", "RXLED", "TXRXLED", "PWREN", "SLEEP", "DRIVE_0", "DRIVE1", "IOMODE", "TXDEN", "CLK30", "CLK15", "CLK7_5" | |
68 | ##Type_232H Chips | |
69 | #cbush0=TRISTATE # String parsed to integer: | |
70 | #cbush1=TRISTATE # String parsed to integer: | |
71 | #cbush2=TRISTATE # String parsed to integer: | |
72 | #cbush3=TRISTATE # String parsed to integer: | |
73 | #cbush4=TRISTATE # String parsed to integer: | |
74 | #cbush5=TRISTATE # String parsed to integer: | |
75 | #cbush6=TRISTATE # String parsed to integer: | |
76 | #cbush7=TRISTATE # String parsed to integer: | |
77 | #cbush8=TRISTATE # String parsed to integer: | |
78 | #cbush9=TRISTATE # String parsed to integer: | |
79 | # Group Drive | |
80 | # Strings to be used in this config file are: | |
81 | # "4MA", "8MA", "12MA", "16MA" | |
82 | #group0_drive # Integer: | |
add00ad6 RH |
83 | |
84 | # Only used on FT230X chips (when omitted, use chip defaults) | |
e0d59256 H |
85 | # Possible values correspond to enum ftdi_cbusx_func in ftdi.h and strings are defined in function parse_cbusx in ftdi_eeprom/main.c. |
86 | # Values are (see current ftid.h for an up to date list): | |
87 | # CBUSX_TRISTATE = 0, CBUSX_TXLED = 1, CBUSX_RXLED = 2, CBUSX_TXRXLED = 3, CBUSX_PWREN = 4, CBUSX_SLEEP = 5, CBUSX_DRIVE_0 = 6, CBUSX_DRIVE1 = 7, CBUSX_IOMODE = 8, CBUSX_TXDEN = 9, CBUSX_CLK24 = 10, CBUSX_CLK12 = 11, CBUSX_CLK6 = 12, CBUSX_BAT_DETECT = 13, CBUSX_BAT_DETECT_NEG = 14, CBUSX_I2C_TXE = 15, CBUSX_I2C_RXF = 16, CBUSX_VBUS_SENSE = 17, CBUSX_BB_WR = 18, CBUSX_BB_RD = 19, CBUSX_TIME_STAMP = 20, CBUSX_AWAKE = 21 | |
88 | # Strings to be used in this config file are: | |
89 | # "TRISTATE", "TXLED", "RXLED", "TXRXLED", "PWREN", "SLEEP", "DRIVE_0", "DRIVE1", "IOMODE", "TXDEN", "CLK24", "CLK12", "CLK6", "BAT_DETECT", "BAT_DETECT_NEG", "I2C_TXE", "I2C_RXF", "VBUS_SENSE", "BB_WR", "BB_RD", "TIME_STAMP", "AWAKE" | |
90 | #cbusx0=TXDEN # String parsed to integer: | |
91 | #cbusx1=RXLED # String parsed to integer: | |
92 | #cbusx2=TXLED # String parsed to integer: | |
93 | #cbusx3=SLEEP # String parsed to integer: | |
add00ad6 | 94 | |
673ca433 TJ |
95 | ######## |
96 | # Misc # | |
97 | ######## | |
98 | ||
e0d59256 H |
99 | ## Pin Configuration |
100 | #invert_txd # Boolean: Invert TXD signal | |
101 | #invert_rxd # Boolean: Invert RXD signal | |
102 | #invert_rts # Boolean: Invert RTS signal | |
103 | #invert_cts # Boolean: Invert CTS signal | |
104 | #invert_dtr # Boolean: Invert DTR signal | |
105 | #invert_dsr # Boolean: Invert DSR signal | |
106 | #invert_dcd # Boolean: Invert DCD signal | |
107 | #invert_ri # Boolean: Invert RI signal | |
108 | ||
109 | ## Channel Types and Drivers | |
110 | # Possible values are (see current ftid.h (Interface Mode macros) and ftdi.c "channel_mode" for an up to date list). They are parsed in fucntion parse_chtype in ftdi_eeprom/main.c. | |
111 | # (from ftid.h): UART= 0x0, FIFO = 0x1, OPTO = 0x2, CPU = 0x4, FT1284 = 0x8, RS485 = 0x10 | |
112 | # (from ftdi.c): UART = 0x0, FIOF = 0x1, CPU = 0x2, OPTO = 0x3, FT1284 = 0x3 | |
113 | # Strings to be used in this config file are: | |
114 | # "UART", "FIFO", "OPTO", "CPU", "FT1284" | |
115 | cha_type=FIFO # String parsed to integer: | |
116 | #chb_type # String parsed to integer: | |
117 | ||
118 | cha_vcp=false # Boolean: | |
119 | #chb_vcp=false # Boolean: | |
120 | #chc_vcp=false # Boolean: | |
121 | #chd_vcp=false # Boolean: | |
122 | #cha_rs485 # Boolean: | |
123 | #chb_rs485 # Boolean: | |
124 | #chc_rs485 # Boolean: | |
125 | #chd_rs485 # Boolean: | |
126 | ||
127 | ## Include user defined binary data into the the eeprom at address? | |
128 | #user_data_addr # Integer: | |
129 | #user_data_file # String: Filename of the data file to be used | |
130 | ||
131 |