#include <usb.h>
-enum ftdi_chip_type { TYPE_AM=0, TYPE_BM=1, TYPE_2232C=2 };
+#define FTDI_DEFAULT_EEPROM_SIZE 128
+
+/** FTDI chip type */
+enum ftdi_chip_type { TYPE_AM=0, TYPE_BM=1, TYPE_2232C=2, TYPE_R=3 };
+/** Parity mode for ftdi_set_line_property() */
+enum ftdi_parity_type { NONE=0, ODD=1, EVEN=2, MARK=3, SPACE=4 };
+/** Number of stop bits for ftdi_set_line_property() */
+enum ftdi_stopbits_type { STOP_BIT_1=0, STOP_BIT_15=1, STOP_BIT_2=2 };
+/** Number of bits for ftdi_set_line_property() */
+enum ftdi_bits_type { BITS_7=7, BITS_8=8 };
+/** Break type for ftdi_set_line_property2() */
+enum ftdi_break_type { BREAK_OFF=0, BREAK_ON=1 };
+
+/** MPSSE bitbang modes */
enum ftdi_mpsse_mode {
BITMODE_RESET = 0x00,
BITMODE_BITBANG= 0x01,
BITMODE_MPSSE = 0x02,
BITMODE_SYNCBB = 0x04,
BITMODE_MCU = 0x08,
- BITMODE_OPTO = 0x10
+ /* CPU-style fifo mode gets set via EEPROM */
+ BITMODE_OPTO = 0x10,
+ BITMODE_CBUS = 0x20
};
-/* Port interface code for FT2232C */
+/** Port interface for FT2232C */
enum ftdi_interface {
INTERFACE_ANY = 0,
INTERFACE_A = 1,
/* Address High */
/* Address Low */
+/* Definitions for flow control */
+#define SIO_RESET 0 /* Reset the port */
+#define SIO_MODEM_CTRL 1 /* Set the modem control register */
+#define SIO_SET_FLOW_CTRL 2 /* Set flow control register */
+#define SIO_SET_BAUD_RATE 3 /* Set baud rate */
+#define SIO_SET_DATA 4 /* Set the data characteristics of the port */
+
+#define FTDI_DEVICE_OUT_REQTYPE (USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_ENDPOINT_OUT)
+#define FTDI_DEVICE_IN_REQTYPE (USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_ENDPOINT_IN)
+
+/* Requests */
+#define SIO_RESET_REQUEST SIO_RESET
+#define SIO_SET_BAUDRATE_REQUEST SIO_SET_BAUD_RATE
+#define SIO_SET_DATA_REQUEST SIO_SET_DATA
+#define SIO_SET_FLOW_CTRL_REQUEST SIO_SET_FLOW_CTRL
+#define SIO_SET_MODEM_CTRL_REQUEST SIO_MODEM_CTRL
+#define SIO_POLL_MODEM_STATUS_REQUEST 0x05
+#define SIO_SET_EVENT_CHAR_REQUEST 0x06
+#define SIO_SET_ERROR_CHAR_REQUEST 0x07
+#define SIO_SET_LATENCY_TIMER_REQUEST 0x09
+#define SIO_GET_LATENCY_TIMER_REQUEST 0x0A
+#define SIO_SET_BITMODE_REQUEST 0x0B
+#define SIO_READ_PINS_REQUEST 0x0C
+#define SIO_READ_EEPROM_REQUEST 0x90
+#define SIO_WRITE_EEPROM_REQUEST 0x91
+#define SIO_ERASE_EEPROM_REQUEST 0x92
+
+
+#define SIO_RESET_SIO 0
+#define SIO_RESET_PURGE_RX 1
+#define SIO_RESET_PURGE_TX 2
+
+#define SIO_DISABLE_FLOW_CTRL 0x0
+#define SIO_RTS_CTS_HS (0x1 << 8)
+#define SIO_DTR_DSR_HS (0x2 << 8)
+#define SIO_XON_XOFF_HS (0x4 << 8)
+
+#define SIO_SET_DTR_MASK 0x1
+#define SIO_SET_DTR_HIGH ( 1 | ( SIO_SET_DTR_MASK << 8))
+#define SIO_SET_DTR_LOW ( 0 | ( SIO_SET_DTR_MASK << 8))
+#define SIO_SET_RTS_MASK 0x2
+#define SIO_SET_RTS_HIGH ( 2 | ( SIO_SET_RTS_MASK << 8 ))
+#define SIO_SET_RTS_LOW ( 0 | ( SIO_SET_RTS_MASK << 8 ))
+
+#define SIO_RTS_CTS_HS (0x1 << 8)
+
+/* marker for unused usb urb structures
+ (taken from libusb) */
+#define FTDI_URB_USERCONTEXT_COOKIE ((void *)0x1)
+
+/**
+ \brief Main context structure for all libftdi functions.
+
+ Do not access directly if possible.
+*/
struct ftdi_context {
- // USB specific
+ /* USB specific */
+ /** libusb's usb_dev_handle */
struct usb_dev_handle *usb_dev;
+ /** usb read timeout */
int usb_read_timeout;
+ /** usb write timeout */
int usb_write_timeout;
- // FTDI specific
+ /* FTDI specific */
+ /** FTDI chip type */
enum ftdi_chip_type type;
+ /** baudrate */
int baudrate;
+ /** bitbang mode state */
unsigned char bitbang_enabled;
+ /** pointer to read buffer for ftdi_read_data */
unsigned char *readbuffer;
+ /** read buffer offset */
unsigned int readbuffer_offset;
+ /** number of remaining data in internal read buffer */
unsigned int readbuffer_remaining;
+ /** read buffer chunk size */
unsigned int readbuffer_chunksize;
+ /** write buffer chunk size */
unsigned int writebuffer_chunksize;
- // FTDI FT2232C requirecments
- int interface; // 0 or 1
- int index; // 1 or 2
- // Endpoints
+ /* FTDI FT2232C requirecments */
+ /** FT2232C interface number: 0 or 1 */
+ int interface; /* 0 or 1 */
+ /** FT2232C index number: 1 or 2 */
+ int index; /* 1 or 2 */
+ /* Endpoints */
+ /** FT2232C end points: 1 or 2 */
int in_ep;
- int out_ep; // 1 or 2
+ int out_ep; /* 1 or 2 */
- /* 1: (default) Normal bitbang mode, 2: FT2232C SPI bitbang mode */
+ /** Bitbang mode. 1: (default) Normal bitbang mode, 2: FT2232C SPI bitbang mode */
unsigned char bitbang_mode;
- // misc
+ /** EEPROM size. Default is 128 bytes for 232BM and 245BM chips */
+ int eeprom_size;
+
+ /** String representation of last error */
char *error_str;
+
+ /** Buffer needed for async communication */
+ char *async_usb_buffer;
+ /** Number of URB-structures we can buffer */
+ unsigned int async_usb_buffer_size;
+};
+
+/**
+ \brief list of usb devices created by ftdi_usb_find_all()
+*/
+struct ftdi_device_list {
+ /** pointer to next entry */
+ struct ftdi_device_list *next;
+ /** pointer to libusb's usb_device */
+ struct usb_device *dev;
};
+/**
+ \brief FTDI eeprom structure
+*/
struct ftdi_eeprom {
+ /** vendor id */
int vendor_id;
+ /** product id */
int product_id;
+ /** self powered */
int self_powered;
+ /** remote wakeup */
int remote_wakeup;
+ /** chip type */
int BM_type_chip;
+ /** input in isochronous transfer mode */
int in_is_isochronous;
+ /** output in isochronous transfer mode */
int out_is_isochronous;
+ /** suspend pull downs */
int suspend_pull_downs;
+ /** use serial */
int use_serial;
+ /** fake usb version */
int change_usb_version;
+ /** usb version */
int usb_version;
+ /** maximum power */
int max_power;
+ /** manufacturer name */
char *manufacturer;
+ /** product name */
char *product;
+ /** serial number */
char *serial;
+
+ /** eeprom size in bytes. This doesn't get stored in the eeprom
+ but is the only way to pass it to ftdi_eeprom_build. */
+ int size;
};
#ifdef __cplusplus
#endif
int ftdi_init(struct ftdi_context *ftdi);
- int ftdi_select_interfae(struct ftdi_context *ftdi, enum ftdi_interface interface);
+ struct ftdi_context *ftdi_new();
+ int ftdi_set_interface(struct ftdi_context *ftdi, enum ftdi_interface interface);
void ftdi_deinit(struct ftdi_context *ftdi);
+ void ftdi_free(struct ftdi_context *ftdi);
void ftdi_set_usbdev (struct ftdi_context *ftdi, usb_dev_handle *usbdev);
+
+ int ftdi_usb_find_all(struct ftdi_context *ftdi, struct ftdi_device_list **devlist,
+ int vendor, int product);
+ void ftdi_list_free(struct ftdi_device_list **devlist);
+ void ftdi_list_free2(struct ftdi_device_list *devlist);
+ int ftdi_usb_get_strings(struct ftdi_context *ftdi, struct usb_device *dev,
+ char * manufacturer, int mnf_len,
+ char * description, int desc_len,
+ char * serial, int serial_len);
+
int ftdi_usb_open(struct ftdi_context *ftdi, int vendor, int product);
int ftdi_usb_open_desc(struct ftdi_context *ftdi, int vendor, int product,
const char* description, const char* serial);
+ int ftdi_usb_open_dev(struct ftdi_context *ftdi, struct usb_device *dev);
+
int ftdi_usb_close(struct ftdi_context *ftdi);
int ftdi_usb_reset(struct ftdi_context *ftdi);
+ int ftdi_usb_purge_rx_buffer(struct ftdi_context *ftdi);
+ int ftdi_usb_purge_tx_buffer(struct ftdi_context *ftdi);
int ftdi_usb_purge_buffers(struct ftdi_context *ftdi);
int ftdi_set_baudrate(struct ftdi_context *ftdi, int baudrate);
+ int ftdi_set_line_property(struct ftdi_context *ftdi, enum ftdi_bits_type bits,
+ enum ftdi_stopbits_type sbit, enum ftdi_parity_type parity);
+ int ftdi_set_line_property2(struct ftdi_context *ftdi, enum ftdi_bits_type bits,
+ enum ftdi_stopbits_type sbit, enum ftdi_parity_type parity,
+ enum ftdi_break_type break_type);
int ftdi_read_data(struct ftdi_context *ftdi, unsigned char *buf, int size);
int ftdi_read_data_set_chunksize(struct ftdi_context *ftdi, unsigned int chunksize);
int ftdi_write_data_set_chunksize(struct ftdi_context *ftdi, unsigned int chunksize);
int ftdi_write_data_get_chunksize(struct ftdi_context *ftdi, unsigned int *chunksize);
+ int ftdi_write_data_async(struct ftdi_context *ftdi, unsigned char *buf, int size);
+ void ftdi_async_complete(struct ftdi_context *ftdi, int wait_for_more);
+
int ftdi_enable_bitbang(struct ftdi_context *ftdi, unsigned char bitmask);
int ftdi_disable_bitbang(struct ftdi_context *ftdi);
int ftdi_set_bitmode(struct ftdi_context *ftdi, unsigned char bitmask, unsigned char mode);
int ftdi_set_latency_timer(struct ftdi_context *ftdi, unsigned char latency);
int ftdi_get_latency_timer(struct ftdi_context *ftdi, unsigned char *latency);
- // init and build eeprom from ftdi_eeprom structure
+ int ftdi_poll_modem_status(struct ftdi_context *ftdi, unsigned short *status);
+
+ /* flow control */
+ int ftdi_setflowctrl(struct ftdi_context *ftdi, int flowctrl);
+ int ftdi_setdtr_rts(struct ftdi_context *ftdi, int dtr, int rts);
+ int ftdi_setdtr(struct ftdi_context *ftdi, int state);
+ int ftdi_setrts(struct ftdi_context *ftdi, int state);
+
+ int ftdi_set_event_char(struct ftdi_context *ftdi, unsigned char eventch, unsigned char enable);
+ int ftdi_set_error_char(struct ftdi_context *ftdi, unsigned char errorch, unsigned char enable);
+
+ /* set eeprom size */
+ void ftdi_eeprom_setsize(struct ftdi_context *ftdi, struct ftdi_eeprom *eeprom, int size);
+
+ /* init and build eeprom from ftdi_eeprom structure */
void ftdi_eeprom_initdefaults(struct ftdi_eeprom *eeprom);
- int ftdi_eeprom_build(struct ftdi_eeprom *eeprom, unsigned char *output);
+ int ftdi_eeprom_build(struct ftdi_eeprom *eeprom, unsigned char *output);
+ int ftdi_eeprom_decode(struct ftdi_eeprom *eeprom, unsigned char *output, int size);
- // "eeprom" needs to be valid 128 byte eeprom (generated by the eeprom generator)
- // the checksum of the eeprom is valided
+ /* "eeprom" needs to be valid 128 byte eeprom (generated by the eeprom generator)
+ the checksum of the eeprom is valided */
int ftdi_read_eeprom(struct ftdi_context *ftdi, unsigned char *eeprom);
+ int ftdi_read_chipid(struct ftdi_context *ftdi, unsigned int *chipid);
+ int ftdi_read_eeprom_getsize(struct ftdi_context *ftdi, unsigned char *eeprom, int maxsize);
int ftdi_write_eeprom(struct ftdi_context *ftdi, unsigned char *eeprom);
int ftdi_erase_eeprom(struct ftdi_context *ftdi);