1 /***************************************************************************
5 copyright : (C) 2003-2010 by Intra2net AG
6 email : opensource@intra2net.com
7 ***************************************************************************/
9 /***************************************************************************
11 * This program is free software; you can redistribute it and/or modify *
12 * it under the terms of the GNU Lesser General Public License *
13 * version 2.1 as published by the Free Software Foundation; *
15 ***************************************************************************/
18 \mainpage libftdi API documentation
20 Library to talk to FTDI chips. You find the latest versions of libftdi at
21 http://www.intra2net.com/en/developer/libftdi/
23 The library is easy to use. Have a look at this short example:
26 More examples can be found in the "examples" directory.
28 /** \addtogroup libftdi */
39 #define ftdi_error_return(code, str) do { \
40 ftdi->error_str = str; \
44 #define ftdi_error_return_free_device_list(code, str, devs) do { \
45 libusb_free_device_list(devs,1); \
46 ftdi->error_str = str; \
52 Internal function to close usb device pointer.
53 Sets ftdi->usb_dev to NULL.
56 \param ftdi pointer to ftdi_context
60 static void ftdi_usb_close_internal (struct ftdi_context *ftdi)
62 if (ftdi && ftdi->usb_dev)
64 libusb_close (ftdi->usb_dev);
70 Initializes a ftdi_context.
72 \param ftdi pointer to ftdi_context
75 \retval -1: couldn't allocate read buffer
77 \remark This should be called before all functions
79 int ftdi_init(struct ftdi_context *ftdi)
83 ftdi->usb_read_timeout = 5000;
84 ftdi->usb_write_timeout = 5000;
86 ftdi->type = TYPE_BM; /* chip type */
88 ftdi->bitbang_enabled = 0; /* 0: normal mode 1: any of the bitbang modes enabled */
90 ftdi->readbuffer = NULL;
91 ftdi->readbuffer_offset = 0;
92 ftdi->readbuffer_remaining = 0;
93 ftdi->writebuffer_chunksize = 4096;
94 ftdi->max_packet_size = 0;
100 ftdi->bitbang_mode = 1; /* when bitbang is enabled this holds the number of the mode */
102 ftdi->error_str = NULL;
106 /* All fine. Now allocate the readbuffer */
107 return ftdi_read_data_set_chunksize(ftdi, 4096);
111 Allocate and initialize a new ftdi_context
113 \return a pointer to a new ftdi_context, or NULL on failure
115 struct ftdi_context *ftdi_new(void)
117 struct ftdi_context * ftdi = (struct ftdi_context *)malloc(sizeof(struct ftdi_context));
124 if (ftdi_init(ftdi) != 0)
134 Open selected channels on a chip, otherwise use first channel.
136 \param ftdi pointer to ftdi_context
137 \param interface Interface to use for FT2232C/2232H/4232H chips.
140 \retval -1: unknown interface
141 \retval -2: USB device unavailable
143 int ftdi_set_interface(struct ftdi_context *ftdi, enum ftdi_interface interface)
146 ftdi_error_return(-2, "USB device unavailable");
152 /* ftdi_usb_open_desc cares to set the right index, depending on the found chip */
156 ftdi->index = INTERFACE_B;
162 ftdi->index = INTERFACE_C;
168 ftdi->index = INTERFACE_D;
173 ftdi_error_return(-1, "Unknown interface");
179 Deinitializes a ftdi_context.
181 \param ftdi pointer to ftdi_context
183 void ftdi_deinit(struct ftdi_context *ftdi)
188 ftdi_usb_close_internal (ftdi);
190 if (ftdi->readbuffer != NULL)
192 free(ftdi->readbuffer);
193 ftdi->readbuffer = NULL;
195 libusb_exit(ftdi->usb_ctx);
199 Deinitialize and free an ftdi_context.
201 \param ftdi pointer to ftdi_context
203 void ftdi_free(struct ftdi_context *ftdi)
210 Use an already open libusb device.
212 \param ftdi pointer to ftdi_context
213 \param usb libusb libusb_device_handle to use
215 void ftdi_set_usbdev (struct ftdi_context *ftdi, libusb_device_handle *usb)
225 Finds all ftdi devices on the usb bus. Creates a new ftdi_device_list which
226 needs to be deallocated by ftdi_list_free() after use.
228 \param ftdi pointer to ftdi_context
229 \param devlist Pointer where to store list of found devices
230 \param vendor Vendor ID to search for
231 \param product Product ID to search for
233 \retval >0: number of devices found
234 \retval -3: out of memory
235 \retval -4: libusb_init() failed
236 \retval -5: libusb_get_device_list() failed
237 \retval -6: libusb_get_device_descriptor() failed
239 int ftdi_usb_find_all(struct ftdi_context *ftdi, struct ftdi_device_list **devlist, int vendor, int product)
241 struct ftdi_device_list **curdev;
243 libusb_device **devs;
247 if (libusb_init(&ftdi->usb_ctx) < 0)
248 ftdi_error_return(-4, "libusb_init() failed");
250 if (libusb_get_device_list(ftdi->usb_ctx, &devs) < 0)
251 ftdi_error_return(-5, "libusb_get_device_list() failed");
256 while ((dev = devs[i++]) != NULL)
258 struct libusb_device_descriptor desc;
260 if (libusb_get_device_descriptor(dev, &desc) < 0)
261 ftdi_error_return(-6, "libusb_get_device_descriptor() failed");
263 if (desc.idVendor == vendor && desc.idProduct == product)
265 *curdev = (struct ftdi_device_list*)malloc(sizeof(struct ftdi_device_list));
267 ftdi_error_return(-3, "out of memory");
269 (*curdev)->next = NULL;
270 (*curdev)->dev = dev;
272 curdev = &(*curdev)->next;
281 Frees a usb device list.
283 \param devlist USB device list created by ftdi_usb_find_all()
285 void ftdi_list_free(struct ftdi_device_list **devlist)
287 struct ftdi_device_list *curdev, *next;
289 for (curdev = *devlist; curdev != NULL;)
300 Frees a usb device list.
302 \param devlist USB device list created by ftdi_usb_find_all()
304 void ftdi_list_free2(struct ftdi_device_list *devlist)
306 ftdi_list_free(&devlist);
310 Return device ID strings from the usb device.
312 The parameters manufacturer, description and serial may be NULL
313 or pointer to buffers to store the fetched strings.
315 \note Use this function only in combination with ftdi_usb_find_all()
316 as it closes the internal "usb_dev" after use.
318 \param ftdi pointer to ftdi_context
319 \param dev libusb usb_dev to use
320 \param manufacturer Store manufacturer string here if not NULL
321 \param mnf_len Buffer size of manufacturer string
322 \param description Store product description string here if not NULL
323 \param desc_len Buffer size of product description string
324 \param serial Store serial string here if not NULL
325 \param serial_len Buffer size of serial string
328 \retval -1: wrong arguments
329 \retval -4: unable to open device
330 \retval -7: get product manufacturer failed
331 \retval -8: get product description failed
332 \retval -9: get serial number failed
333 \retval -11: libusb_get_device_descriptor() failed
335 int ftdi_usb_get_strings(struct ftdi_context * ftdi, struct libusb_device * dev,
336 char * manufacturer, int mnf_len, char * description, int desc_len, char * serial, int serial_len)
338 struct libusb_device_descriptor desc;
340 if ((ftdi==NULL) || (dev==NULL))
343 if (libusb_open(dev, &ftdi->usb_dev) < 0)
344 ftdi_error_return(-4, "libusb_open() failed");
346 if (libusb_get_device_descriptor(dev, &desc) < 0)
347 ftdi_error_return(-11, "libusb_get_device_descriptor() failed");
349 if (manufacturer != NULL)
351 if (libusb_get_string_descriptor_ascii(ftdi->usb_dev, desc.iManufacturer, (unsigned char *)manufacturer, mnf_len) < 0)
353 ftdi_usb_close_internal (ftdi);
354 ftdi_error_return(-7, "libusb_get_string_descriptor_ascii() failed");
358 if (description != NULL)
360 if (libusb_get_string_descriptor_ascii(ftdi->usb_dev, desc.iProduct, (unsigned char *)description, desc_len) < 0)
362 ftdi_usb_close_internal (ftdi);
363 ftdi_error_return(-8, "libusb_get_string_descriptor_ascii() failed");
369 if (libusb_get_string_descriptor_ascii(ftdi->usb_dev, desc.iSerialNumber, (unsigned char *)serial, serial_len) < 0)
371 ftdi_usb_close_internal (ftdi);
372 ftdi_error_return(-9, "libusb_get_string_descriptor_ascii() failed");
376 ftdi_usb_close_internal (ftdi);
382 * Internal function to determine the maximum packet size.
383 * \param ftdi pointer to ftdi_context
384 * \param dev libusb usb_dev to use
385 * \retval Maximum packet size for this device
387 static unsigned int _ftdi_determine_max_packet_size(struct ftdi_context *ftdi, libusb_device *dev)
389 struct libusb_device_descriptor desc;
390 struct libusb_config_descriptor *config0;
391 unsigned int packet_size;
394 if (ftdi == NULL || dev == NULL)
397 // Determine maximum packet size. Init with default value.
398 // New hi-speed devices from FTDI use a packet size of 512 bytes
399 // but could be connected to a normal speed USB hub -> 64 bytes packet size.
400 if (ftdi->type == TYPE_2232H || ftdi->type == TYPE_4232H)
405 if (libusb_get_device_descriptor(dev, &desc) < 0)
408 if (libusb_get_config_descriptor(dev, 0, &config0) < 0)
411 if (desc.bNumConfigurations > 0)
413 if (ftdi->interface < config0->bNumInterfaces)
415 struct libusb_interface interface = config0->interface[ftdi->interface];
416 if (interface.num_altsetting > 0)
418 struct libusb_interface_descriptor descriptor = interface.altsetting[0];
419 if (descriptor.bNumEndpoints > 0)
421 packet_size = descriptor.endpoint[0].wMaxPacketSize;
427 libusb_free_config_descriptor (config0);
432 Opens a ftdi device given by an usb_device.
434 \param ftdi pointer to ftdi_context
435 \param dev libusb usb_dev to use
438 \retval -3: unable to config device
439 \retval -4: unable to open device
440 \retval -5: unable to claim device
441 \retval -6: reset failed
442 \retval -7: set baudrate failed
443 \retval -8: ftdi context invalid
444 \retval -9: libusb_get_device_descriptor() failed
445 \retval -10: libusb_get_config_descriptor() failed
446 \retval -11: libusb_etach_kernel_driver() failed
447 \retval -12: libusb_get_configuration() failed
449 int ftdi_usb_open_dev(struct ftdi_context *ftdi, libusb_device *dev)
451 struct libusb_device_descriptor desc;
452 struct libusb_config_descriptor *config0;
453 int cfg, cfg0, detach_errno = 0;
456 ftdi_error_return(-8, "ftdi context invalid");
458 if (libusb_open(dev, &ftdi->usb_dev) < 0)
459 ftdi_error_return(-4, "libusb_open() failed");
461 if (libusb_get_device_descriptor(dev, &desc) < 0)
462 ftdi_error_return(-9, "libusb_get_device_descriptor() failed");
464 if (libusb_get_config_descriptor(dev, 0, &config0) < 0)
465 ftdi_error_return(-10, "libusb_get_config_descriptor() failed");
466 cfg0 = config0->bConfigurationValue;
467 libusb_free_config_descriptor (config0);
469 // Try to detach ftdi_sio kernel module.
471 // The return code is kept in a separate variable and only parsed
472 // if usb_set_configuration() or usb_claim_interface() fails as the
473 // detach operation might be denied and everything still works fine.
474 // Likely scenario is a static ftdi_sio kernel module.
475 if (libusb_detach_kernel_driver(ftdi->usb_dev, ftdi->interface) !=0)
476 detach_errno = errno;
478 if (libusb_get_configuration (ftdi->usb_dev, &cfg) < 0)
479 ftdi_error_return(-12, "libusb_get_configuration () failed");
480 // set configuration (needed especially for windows)
481 // tolerate EBUSY: one device with one configuration, but two interfaces
482 // and libftdi sessions to both interfaces (e.g. FT2232)
483 if (desc.bNumConfigurations > 0 && cfg != cfg0)
485 if (libusb_set_configuration(ftdi->usb_dev, cfg0) < 0)
487 ftdi_usb_close_internal (ftdi);
488 if(detach_errno == EPERM)
490 ftdi_error_return(-8, "inappropriate permissions on device!");
494 ftdi_error_return(-3, "unable to set usb configuration. Make sure the default FTDI driver is not in use");
499 if (libusb_claim_interface(ftdi->usb_dev, ftdi->interface) < 0)
501 ftdi_usb_close_internal (ftdi);
502 if(detach_errno == EPERM)
504 ftdi_error_return(-8, "inappropriate permissions on device!");
508 ftdi_error_return(-5, "unable to claim usb device. Make sure the default FTDI driver is not in use");
512 if (ftdi_usb_reset (ftdi) != 0)
514 ftdi_usb_close_internal (ftdi);
515 ftdi_error_return(-6, "ftdi_usb_reset failed");
518 // Try to guess chip type
519 // Bug in the BM type chips: bcdDevice is 0x200 for serial == 0
520 if (desc.bcdDevice == 0x400 || (desc.bcdDevice == 0x200
521 && desc.iSerialNumber == 0))
522 ftdi->type = TYPE_BM;
523 else if (desc.bcdDevice == 0x200)
524 ftdi->type = TYPE_AM;
525 else if (desc.bcdDevice == 0x500)
526 ftdi->type = TYPE_2232C;
527 else if (desc.bcdDevice == 0x600)
529 else if (desc.bcdDevice == 0x700)
530 ftdi->type = TYPE_2232H;
531 else if (desc.bcdDevice == 0x800)
532 ftdi->type = TYPE_4232H;
534 // Set default interface on dual/quad type chips
541 ftdi->index = INTERFACE_A;
547 // Determine maximum packet size
548 ftdi->max_packet_size = _ftdi_determine_max_packet_size(ftdi, dev);
550 if (ftdi_set_baudrate (ftdi, 9600) != 0)
552 ftdi_usb_close_internal (ftdi);
553 ftdi_error_return(-7, "set baudrate failed");
556 ftdi_error_return(0, "all fine");
560 Opens the first device with a given vendor and product ids.
562 \param ftdi pointer to ftdi_context
563 \param vendor Vendor ID
564 \param product Product ID
566 \retval same as ftdi_usb_open_desc()
568 int ftdi_usb_open(struct ftdi_context *ftdi, int vendor, int product)
570 return ftdi_usb_open_desc(ftdi, vendor, product, NULL, NULL);
574 Opens the first device with a given, vendor id, product id,
575 description and serial.
577 \param ftdi pointer to ftdi_context
578 \param vendor Vendor ID
579 \param product Product ID
580 \param description Description to search for. Use NULL if not needed.
581 \param serial Serial to search for. Use NULL if not needed.
584 \retval -3: usb device not found
585 \retval -4: unable to open device
586 \retval -5: unable to claim device
587 \retval -6: reset failed
588 \retval -7: set baudrate failed
589 \retval -8: get product description failed
590 \retval -9: get serial number failed
591 \retval -11: libusb_init() failed
592 \retval -12: libusb_get_device_list() failed
593 \retval -13: libusb_get_device_descriptor() failed
595 int ftdi_usb_open_desc(struct ftdi_context *ftdi, int vendor, int product,
596 const char* description, const char* serial)
598 return ftdi_usb_open_desc_index(ftdi,vendor,product,description,serial,0);
602 Opens the index-th device with a given, vendor id, product id,
603 description and serial.
605 \param ftdi pointer to ftdi_context
606 \param vendor Vendor ID
607 \param product Product ID
608 \param description Description to search for. Use NULL if not needed.
609 \param serial Serial to search for. Use NULL if not needed.
610 \param index Number of matching device to open if there are more than one, starts with 0.
613 \retval -1: usb_find_busses() failed
614 \retval -2: usb_find_devices() failed
615 \retval -3: usb device not found
616 \retval -4: unable to open device
617 \retval -5: unable to claim device
618 \retval -6: reset failed
619 \retval -7: set baudrate failed
620 \retval -8: get product description failed
621 \retval -9: get serial number failed
622 \retval -10: unable to close device
623 \retval -11: ftdi context invalid
625 int ftdi_usb_open_desc_index(struct ftdi_context *ftdi, int vendor, int product,
626 const char* description, const char* serial, unsigned int index)
629 libusb_device **devs;
633 if (libusb_init(&ftdi->usb_ctx) < 0)
634 ftdi_error_return(-11, "libusb_init() failed");
637 ftdi_error_return(-11, "ftdi context invalid");
639 if (libusb_get_device_list(ftdi->usb_ctx, &devs) < 0)
640 ftdi_error_return(-12, "libusb_get_device_list() failed");
642 while ((dev = devs[i++]) != NULL)
644 struct libusb_device_descriptor desc;
647 if (libusb_get_device_descriptor(dev, &desc) < 0)
648 ftdi_error_return_free_device_list(-13, "libusb_get_device_descriptor() failed", devs);
650 if (desc.idVendor == vendor && desc.idProduct == product)
652 if (libusb_open(dev, &ftdi->usb_dev) < 0)
653 ftdi_error_return_free_device_list(-4, "usb_open() failed", devs);
655 if (description != NULL)
657 if (libusb_get_string_descriptor_ascii(ftdi->usb_dev, desc.iProduct, (unsigned char *)string, sizeof(string)) < 0)
659 libusb_close (ftdi->usb_dev);
660 ftdi_error_return_free_device_list(-8, "unable to fetch product description", devs);
662 if (strncmp(string, description, sizeof(string)) != 0)
664 libusb_close (ftdi->usb_dev);
670 if (libusb_get_string_descriptor_ascii(ftdi->usb_dev, desc.iSerialNumber, (unsigned char *)string, sizeof(string)) < 0)
672 ftdi_usb_close_internal (ftdi);
673 ftdi_error_return_free_device_list(-9, "unable to fetch serial number", devs);
675 if (strncmp(string, serial, sizeof(string)) != 0)
677 ftdi_usb_close_internal (ftdi);
682 ftdi_usb_close_internal (ftdi);
690 res = ftdi_usb_open_dev(ftdi, dev);
691 libusb_free_device_list(devs,1);
697 ftdi_error_return_free_device_list(-3, "device not found", devs);
701 Opens the ftdi-device described by a description-string.
702 Intended to be used for parsing a device-description given as commandline argument.
704 \param ftdi pointer to ftdi_context
705 \param description NULL-terminated description-string, using this format:
706 \li <tt>d:\<devicenode></tt> path of bus and device-node (e.g. "003/001") within usb device tree (usually at /proc/bus/usb/)
707 \li <tt>i:\<vendor>:\<product></tt> first device with given vendor and product id, ids can be decimal, octal (preceded by "0") or hex (preceded by "0x")
708 \li <tt>i:\<vendor>:\<product>:\<index></tt> as above with index being the number of the device (starting with 0) if there are more than one
709 \li <tt>s:\<vendor>:\<product>:\<serial></tt> first device with given vendor id, product id and serial string
711 \note The description format may be extended in later versions.
714 \retval -1: libusb_init() failed
715 \retval -2: libusb_get_device_list() failed
716 \retval -3: usb device not found
717 \retval -4: unable to open device
718 \retval -5: unable to claim device
719 \retval -6: reset failed
720 \retval -7: set baudrate failed
721 \retval -8: get product description failed
722 \retval -9: get serial number failed
723 \retval -10: unable to close device
724 \retval -11: illegal description format
725 \retval -12: ftdi context invalid
727 int ftdi_usb_open_string(struct ftdi_context *ftdi, const char* description)
730 ftdi_error_return(-12, "ftdi context invalid");
732 if (description[0] == 0 || description[1] != ':')
733 ftdi_error_return(-11, "illegal description format");
735 if (description[0] == 'd')
738 libusb_device **devs;
739 unsigned int bus_number, device_address;
742 if (libusb_init (&ftdi->usb_ctx) < 0)
743 ftdi_error_return(-1, "libusb_init() failed");
745 if (libusb_get_device_list(ftdi->usb_ctx, &devs) < 0)
746 ftdi_error_return(-2, "libusb_get_device_list() failed");
748 /* XXX: This doesn't handle symlinks/odd paths/etc... */
749 if (sscanf (description + 2, "%u/%u", &bus_number, &device_address) != 2)
750 ftdi_error_return_free_device_list(-11, "illegal description format", devs);
752 while ((dev = devs[i++]) != NULL)
755 if (bus_number == libusb_get_bus_number (dev)
756 && device_address == libusb_get_device_address (dev))
758 ret = ftdi_usb_open_dev(ftdi, dev);
759 libusb_free_device_list(devs,1);
765 ftdi_error_return_free_device_list(-3, "device not found", devs);
767 else if (description[0] == 'i' || description[0] == 's')
770 unsigned int product;
771 unsigned int index=0;
772 const char *serial=NULL;
773 const char *startp, *endp;
776 startp=description+2;
777 vendor=strtoul((char*)startp,(char**)&endp,0);
778 if (*endp != ':' || endp == startp || errno != 0)
779 ftdi_error_return(-11, "illegal description format");
782 product=strtoul((char*)startp,(char**)&endp,0);
783 if (endp == startp || errno != 0)
784 ftdi_error_return(-11, "illegal description format");
786 if (description[0] == 'i' && *endp != 0)
788 /* optional index field in i-mode */
790 ftdi_error_return(-11, "illegal description format");
793 index=strtoul((char*)startp,(char**)&endp,0);
794 if (*endp != 0 || endp == startp || errno != 0)
795 ftdi_error_return(-11, "illegal description format");
797 if (description[0] == 's')
800 ftdi_error_return(-11, "illegal description format");
802 /* rest of the description is the serial */
806 return ftdi_usb_open_desc_index(ftdi, vendor, product, NULL, serial, index);
810 ftdi_error_return(-11, "illegal description format");
815 Resets the ftdi device.
817 \param ftdi pointer to ftdi_context
820 \retval -1: FTDI reset failed
821 \retval -2: USB device unavailable
823 int ftdi_usb_reset(struct ftdi_context *ftdi)
825 if (ftdi == NULL || ftdi->usb_dev == NULL)
826 ftdi_error_return(-2, "USB device unavailable");
828 if (libusb_control_transfer(ftdi->usb_dev, FTDI_DEVICE_OUT_REQTYPE,
829 SIO_RESET_REQUEST, SIO_RESET_SIO,
830 ftdi->index, NULL, 0, ftdi->usb_write_timeout) < 0)
831 ftdi_error_return(-1,"FTDI reset failed");
833 // Invalidate data in the readbuffer
834 ftdi->readbuffer_offset = 0;
835 ftdi->readbuffer_remaining = 0;
841 Clears the read buffer on the chip and the internal read buffer.
843 \param ftdi pointer to ftdi_context
846 \retval -1: read buffer purge failed
847 \retval -2: USB device unavailable
849 int ftdi_usb_purge_rx_buffer(struct ftdi_context *ftdi)
851 if (ftdi == NULL || ftdi->usb_dev == NULL)
852 ftdi_error_return(-2, "USB device unavailable");
854 if (libusb_control_transfer(ftdi->usb_dev, FTDI_DEVICE_OUT_REQTYPE,
855 SIO_RESET_REQUEST, SIO_RESET_PURGE_RX,
856 ftdi->index, NULL, 0, ftdi->usb_write_timeout) < 0)
857 ftdi_error_return(-1, "FTDI purge of RX buffer failed");
859 // Invalidate data in the readbuffer
860 ftdi->readbuffer_offset = 0;
861 ftdi->readbuffer_remaining = 0;
867 Clears the write buffer on the chip.
869 \param ftdi pointer to ftdi_context
872 \retval -1: write buffer purge failed
873 \retval -2: USB device unavailable
875 int ftdi_usb_purge_tx_buffer(struct ftdi_context *ftdi)
877 if (ftdi == NULL || ftdi->usb_dev == NULL)
878 ftdi_error_return(-2, "USB device unavailable");
880 if (libusb_control_transfer(ftdi->usb_dev, FTDI_DEVICE_OUT_REQTYPE,
881 SIO_RESET_REQUEST, SIO_RESET_PURGE_TX,
882 ftdi->index, NULL, 0, ftdi->usb_write_timeout) < 0)
883 ftdi_error_return(-1, "FTDI purge of TX buffer failed");
889 Clears the buffers on the chip and the internal read buffer.
891 \param ftdi pointer to ftdi_context
894 \retval -1: read buffer purge failed
895 \retval -2: write buffer purge failed
896 \retval -3: USB device unavailable
898 int ftdi_usb_purge_buffers(struct ftdi_context *ftdi)
902 if (ftdi == NULL || ftdi->usb_dev == NULL)
903 ftdi_error_return(-3, "USB device unavailable");
905 result = ftdi_usb_purge_rx_buffer(ftdi);
909 result = ftdi_usb_purge_tx_buffer(ftdi);
919 Closes the ftdi device. Call ftdi_deinit() if you're cleaning up.
921 \param ftdi pointer to ftdi_context
924 \retval -1: usb_release failed
925 \retval -3: ftdi context invalid
927 int ftdi_usb_close(struct ftdi_context *ftdi)
932 ftdi_error_return(-3, "ftdi context invalid");
934 if (ftdi->usb_dev != NULL)
935 if (libusb_release_interface(ftdi->usb_dev, ftdi->interface) < 0)
938 ftdi_usb_close_internal (ftdi);
944 ftdi_convert_baudrate returns nearest supported baud rate to that requested.
945 Function is only used internally
948 static int ftdi_convert_baudrate(int baudrate, struct ftdi_context *ftdi,
949 unsigned short *value, unsigned short *index)
951 static const char am_adjust_up[8] = {0, 0, 0, 1, 0, 3, 2, 1};
952 static const char am_adjust_dn[8] = {0, 0, 0, 1, 0, 1, 2, 3};
953 static const char frac_code[8] = {0, 3, 2, 4, 1, 5, 6, 7};
954 int divisor, best_divisor, best_baud, best_baud_diff;
955 unsigned long encoded_divisor;
964 divisor = 24000000 / baudrate;
966 if (ftdi->type == TYPE_AM)
968 // Round down to supported fraction (AM only)
969 divisor -= am_adjust_dn[divisor & 7];
972 // Try this divisor and the one above it (because division rounds down)
976 for (i = 0; i < 2; i++)
978 int try_divisor = divisor + i;
982 // Round up to supported divisor value
983 if (try_divisor <= 8)
985 // Round up to minimum supported divisor
988 else if (ftdi->type != TYPE_AM && try_divisor < 12)
990 // BM doesn't support divisors 9 through 11 inclusive
993 else if (divisor < 16)
995 // AM doesn't support divisors 9 through 15 inclusive
1000 if (ftdi->type == TYPE_AM)
1002 // Round up to supported fraction (AM only)
1003 try_divisor += am_adjust_up[try_divisor & 7];
1004 if (try_divisor > 0x1FFF8)
1006 // Round down to maximum supported divisor value (for AM)
1007 try_divisor = 0x1FFF8;
1012 if (try_divisor > 0x1FFFF)
1014 // Round down to maximum supported divisor value (for BM)
1015 try_divisor = 0x1FFFF;
1019 // Get estimated baud rate (to nearest integer)
1020 baud_estimate = (24000000 + (try_divisor / 2)) / try_divisor;
1021 // Get absolute difference from requested baud rate
1022 if (baud_estimate < baudrate)
1024 baud_diff = baudrate - baud_estimate;
1028 baud_diff = baud_estimate - baudrate;
1030 if (i == 0 || baud_diff < best_baud_diff)
1032 // Closest to requested baud rate so far
1033 best_divisor = try_divisor;
1034 best_baud = baud_estimate;
1035 best_baud_diff = baud_diff;
1038 // Spot on! No point trying
1043 // Encode the best divisor value
1044 encoded_divisor = (best_divisor >> 3) | (frac_code[best_divisor & 7] << 14);
1045 // Deal with special cases for encoded value
1046 if (encoded_divisor == 1)
1048 encoded_divisor = 0; // 3000000 baud
1050 else if (encoded_divisor == 0x4001)
1052 encoded_divisor = 1; // 2000000 baud (BM only)
1054 // Split into "value" and "index" values
1055 *value = (unsigned short)(encoded_divisor & 0xFFFF);
1056 if (ftdi->type == TYPE_2232C || ftdi->type == TYPE_2232H || ftdi->type == TYPE_4232H)
1058 *index = (unsigned short)(encoded_divisor >> 8);
1060 *index |= ftdi->index;
1063 *index = (unsigned short)(encoded_divisor >> 16);
1065 // Return the nearest baud rate
1070 Sets the chip baud rate
1072 \param ftdi pointer to ftdi_context
1073 \param baudrate baud rate to set
1076 \retval -1: invalid baudrate
1077 \retval -2: setting baudrate failed
1078 \retval -3: USB device unavailable
1080 int ftdi_set_baudrate(struct ftdi_context *ftdi, int baudrate)
1082 unsigned short value, index;
1083 int actual_baudrate;
1085 if (ftdi == NULL || ftdi->usb_dev == NULL)
1086 ftdi_error_return(-3, "USB device unavailable");
1088 if (ftdi->bitbang_enabled)
1090 baudrate = baudrate*4;
1093 actual_baudrate = ftdi_convert_baudrate(baudrate, ftdi, &value, &index);
1094 if (actual_baudrate <= 0)
1095 ftdi_error_return (-1, "Silly baudrate <= 0.");
1097 // Check within tolerance (about 5%)
1098 if ((actual_baudrate * 2 < baudrate /* Catch overflows */ )
1099 || ((actual_baudrate < baudrate)
1100 ? (actual_baudrate * 21 < baudrate * 20)
1101 : (baudrate * 21 < actual_baudrate * 20)))
1102 ftdi_error_return (-1, "Unsupported baudrate. Note: bitbang baudrates are automatically multiplied by 4");
1104 if (libusb_control_transfer(ftdi->usb_dev, FTDI_DEVICE_OUT_REQTYPE,
1105 SIO_SET_BAUDRATE_REQUEST, value,
1106 index, NULL, 0, ftdi->usb_write_timeout) < 0)
1107 ftdi_error_return (-2, "Setting new baudrate failed");
1109 ftdi->baudrate = baudrate;
1114 Set (RS232) line characteristics.
1115 The break type can only be set via ftdi_set_line_property2()
1116 and defaults to "off".
1118 \param ftdi pointer to ftdi_context
1119 \param bits Number of bits
1120 \param sbit Number of stop bits
1121 \param parity Parity mode
1124 \retval -1: Setting line property failed
1126 int ftdi_set_line_property(struct ftdi_context *ftdi, enum ftdi_bits_type bits,
1127 enum ftdi_stopbits_type sbit, enum ftdi_parity_type parity)
1129 return ftdi_set_line_property2(ftdi, bits, sbit, parity, BREAK_OFF);
1133 Set (RS232) line characteristics
1135 \param ftdi pointer to ftdi_context
1136 \param bits Number of bits
1137 \param sbit Number of stop bits
1138 \param parity Parity mode
1139 \param break_type Break type
1142 \retval -1: Setting line property failed
1143 \retval -2: USB device unavailable
1145 int ftdi_set_line_property2(struct ftdi_context *ftdi, enum ftdi_bits_type bits,
1146 enum ftdi_stopbits_type sbit, enum ftdi_parity_type parity,
1147 enum ftdi_break_type break_type)
1149 unsigned short value = bits;
1151 if (ftdi == NULL || ftdi->usb_dev == NULL)
1152 ftdi_error_return(-2, "USB device unavailable");
1157 value |= (0x00 << 8);
1160 value |= (0x01 << 8);
1163 value |= (0x02 << 8);
1166 value |= (0x03 << 8);
1169 value |= (0x04 << 8);
1176 value |= (0x00 << 11);
1179 value |= (0x01 << 11);
1182 value |= (0x02 << 11);
1189 value |= (0x00 << 14);
1192 value |= (0x01 << 14);
1196 if (libusb_control_transfer(ftdi->usb_dev, FTDI_DEVICE_OUT_REQTYPE,
1197 SIO_SET_DATA_REQUEST, value,
1198 ftdi->index, NULL, 0, ftdi->usb_write_timeout) < 0)
1199 ftdi_error_return (-1, "Setting new line property failed");
1205 Writes data in chunks (see ftdi_write_data_set_chunksize()) to the chip
1207 \param ftdi pointer to ftdi_context
1208 \param buf Buffer with the data
1209 \param size Size of the buffer
1211 \retval -666: USB device unavailable
1212 \retval <0: error code from usb_bulk_write()
1213 \retval >0: number of bytes written
1215 int ftdi_write_data(struct ftdi_context *ftdi, unsigned char *buf, int size)
1220 if (ftdi == NULL || ftdi->usb_dev == NULL)
1221 ftdi_error_return(-666, "USB device unavailable");
1223 while (offset < size)
1225 int write_size = ftdi->writebuffer_chunksize;
1227 if (offset+write_size > size)
1228 write_size = size-offset;
1230 if (libusb_bulk_transfer(ftdi->usb_dev, ftdi->in_ep, buf+offset, write_size, &actual_length, ftdi->usb_write_timeout) < 0)
1231 ftdi_error_return(-1, "usb bulk write failed");
1233 offset += actual_length;
1239 static void ftdi_read_data_cb(struct libusb_transfer *transfer)
1241 struct ftdi_transfer_control *tc = (struct ftdi_transfer_control *) transfer->user_data;
1242 struct ftdi_context *ftdi = tc->ftdi;
1243 int packet_size, actual_length, num_of_chunks, chunk_remains, i, ret;
1245 packet_size = ftdi->max_packet_size;
1247 actual_length = transfer->actual_length;
1249 if (actual_length > 2)
1251 // skip FTDI status bytes.
1252 // Maybe stored in the future to enable modem use
1253 num_of_chunks = actual_length / packet_size;
1254 chunk_remains = actual_length % packet_size;
1255 //printf("actual_length = %X, num_of_chunks = %X, chunk_remains = %X, readbuffer_offset = %X\n", actual_length, num_of_chunks, chunk_remains, ftdi->readbuffer_offset);
1257 ftdi->readbuffer_offset += 2;
1260 if (actual_length > packet_size - 2)
1262 for (i = 1; i < num_of_chunks; i++)
1263 memmove (ftdi->readbuffer+ftdi->readbuffer_offset+(packet_size - 2)*i,
1264 ftdi->readbuffer+ftdi->readbuffer_offset+packet_size*i,
1266 if (chunk_remains > 2)
1268 memmove (ftdi->readbuffer+ftdi->readbuffer_offset+(packet_size - 2)*i,
1269 ftdi->readbuffer+ftdi->readbuffer_offset+packet_size*i,
1271 actual_length -= 2*num_of_chunks;
1274 actual_length -= 2*(num_of_chunks-1)+chunk_remains;
1277 if (actual_length > 0)
1279 // data still fits in buf?
1280 if (tc->offset + actual_length <= tc->size)
1282 memcpy (tc->buf + tc->offset, ftdi->readbuffer + ftdi->readbuffer_offset, actual_length);
1283 //printf("buf[0] = %X, buf[1] = %X\n", buf[0], buf[1]);
1284 tc->offset += actual_length;
1286 ftdi->readbuffer_offset = 0;
1287 ftdi->readbuffer_remaining = 0;
1289 /* Did we read exactly the right amount of bytes? */
1290 if (tc->offset == tc->size)
1292 //printf("read_data exact rem %d offset %d\n",
1293 //ftdi->readbuffer_remaining, offset);
1300 // only copy part of the data or size <= readbuffer_chunksize
1301 int part_size = tc->size - tc->offset;
1302 memcpy (tc->buf + tc->offset, ftdi->readbuffer + ftdi->readbuffer_offset, part_size);
1303 tc->offset += part_size;
1305 ftdi->readbuffer_offset += part_size;
1306 ftdi->readbuffer_remaining = actual_length - part_size;
1308 /* printf("Returning part: %d - size: %d - offset: %d - actual_length: %d - remaining: %d\n",
1309 part_size, size, offset, actual_length, ftdi->readbuffer_remaining); */
1315 ret = libusb_submit_transfer (transfer);
1321 static void ftdi_write_data_cb(struct libusb_transfer *transfer)
1323 struct ftdi_transfer_control *tc = (struct ftdi_transfer_control *) transfer->user_data;
1324 struct ftdi_context *ftdi = tc->ftdi;
1326 tc->offset += transfer->actual_length;
1328 if (tc->offset == tc->size)
1334 int write_size = ftdi->writebuffer_chunksize;
1337 if (tc->offset + write_size > tc->size)
1338 write_size = tc->size - tc->offset;
1340 transfer->length = write_size;
1341 transfer->buffer = tc->buf + tc->offset;
1342 ret = libusb_submit_transfer (transfer);
1350 Writes data to the chip. Does not wait for completion of the transfer
1351 nor does it make sure that the transfer was successful.
1353 Use libusb 1.0 asynchronous API.
1355 \param ftdi pointer to ftdi_context
1356 \param buf Buffer with the data
1357 \param size Size of the buffer
1359 \retval NULL: Some error happens when submit transfer
1360 \retval !NULL: Pointer to a ftdi_transfer_control
1363 struct ftdi_transfer_control *ftdi_write_data_submit(struct ftdi_context *ftdi, unsigned char *buf, int size)
1365 struct ftdi_transfer_control *tc;
1366 struct libusb_transfer *transfer = libusb_alloc_transfer(0);
1367 int write_size, ret;
1369 if (ftdi == NULL || ftdi->usb_dev == NULL)
1371 libusb_free_transfer(transfer);
1375 tc = (struct ftdi_transfer_control *) malloc (sizeof (*tc));
1377 if (!tc || !transfer)
1386 if (size < ftdi->writebuffer_chunksize)
1389 write_size = ftdi->writebuffer_chunksize;
1391 libusb_fill_bulk_transfer(transfer, ftdi->usb_dev, ftdi->in_ep, buf,
1392 write_size, ftdi_write_data_cb, tc,
1393 ftdi->usb_write_timeout);
1394 transfer->type = LIBUSB_TRANSFER_TYPE_BULK;
1396 ret = libusb_submit_transfer(transfer);
1399 libusb_free_transfer(transfer);
1401 tc->transfer = NULL;
1404 tc->transfer = transfer;
1410 Reads data from the chip. Does not wait for completion of the transfer
1411 nor does it make sure that the transfer was successful.
1413 Use libusb 1.0 asynchronous API.
1415 \param ftdi pointer to ftdi_context
1416 \param buf Buffer with the data
1417 \param size Size of the buffer
1419 \retval NULL: Some error happens when submit transfer
1420 \retval !NULL: Pointer to a ftdi_transfer_control
1423 struct ftdi_transfer_control *ftdi_read_data_submit(struct ftdi_context *ftdi, unsigned char *buf, int size)
1425 struct ftdi_transfer_control *tc;
1426 struct libusb_transfer *transfer;
1429 if (ftdi == NULL || ftdi->usb_dev == NULL)
1432 tc = (struct ftdi_transfer_control *) malloc (sizeof (*tc));
1440 if (size <= ftdi->readbuffer_remaining)
1442 memcpy (buf, ftdi->readbuffer+ftdi->readbuffer_offset, size);
1445 ftdi->readbuffer_remaining -= size;
1446 ftdi->readbuffer_offset += size;
1448 /* printf("Returning bytes from buffer: %d - remaining: %d\n", size, ftdi->readbuffer_remaining); */
1452 tc->transfer = NULL;
1457 if (ftdi->readbuffer_remaining != 0)
1459 memcpy (buf, ftdi->readbuffer+ftdi->readbuffer_offset, ftdi->readbuffer_remaining);
1461 tc->offset = ftdi->readbuffer_remaining;
1466 transfer = libusb_alloc_transfer(0);
1473 ftdi->readbuffer_remaining = 0;
1474 ftdi->readbuffer_offset = 0;
1476 libusb_fill_bulk_transfer(transfer, ftdi->usb_dev, ftdi->out_ep, ftdi->readbuffer, ftdi->readbuffer_chunksize, ftdi_read_data_cb, tc, ftdi->usb_read_timeout);
1477 transfer->type = LIBUSB_TRANSFER_TYPE_BULK;
1479 ret = libusb_submit_transfer(transfer);
1482 libusb_free_transfer(transfer);
1486 tc->transfer = transfer;
1492 Wait for completion of the transfer.
1494 Use libusb 1.0 asynchronous API.
1496 \param tc pointer to ftdi_transfer_control
1498 \retval < 0: Some error happens
1499 \retval >= 0: Data size transferred
1502 int ftdi_transfer_data_done(struct ftdi_transfer_control *tc)
1506 while (!tc->completed)
1508 ret = libusb_handle_events(tc->ftdi->usb_ctx);
1511 if (ret == LIBUSB_ERROR_INTERRUPTED)
1513 libusb_cancel_transfer(tc->transfer);
1514 while (!tc->completed)
1515 if (libusb_handle_events(tc->ftdi->usb_ctx) < 0)
1517 libusb_free_transfer(tc->transfer);
1525 * tc->transfer could be NULL if "(size <= ftdi->readbuffer_remaining)"
1526 * at ftdi_read_data_submit(). Therefore, we need to check it here.
1530 if (tc->transfer->status != LIBUSB_TRANSFER_COMPLETED)
1532 libusb_free_transfer(tc->transfer);
1539 Configure write buffer chunk size.
1542 \param ftdi pointer to ftdi_context
1543 \param chunksize Chunk size
1546 \retval -1: ftdi context invalid
1548 int ftdi_write_data_set_chunksize(struct ftdi_context *ftdi, unsigned int chunksize)
1551 ftdi_error_return(-1, "ftdi context invalid");
1553 ftdi->writebuffer_chunksize = chunksize;
1558 Get write buffer chunk size.
1560 \param ftdi pointer to ftdi_context
1561 \param chunksize Pointer to store chunk size in
1564 \retval -1: ftdi context invalid
1566 int ftdi_write_data_get_chunksize(struct ftdi_context *ftdi, unsigned int *chunksize)
1569 ftdi_error_return(-1, "ftdi context invalid");
1571 *chunksize = ftdi->writebuffer_chunksize;
1576 Reads data in chunks (see ftdi_read_data_set_chunksize()) from the chip.
1578 Automatically strips the two modem status bytes transfered during every read.
1580 \param ftdi pointer to ftdi_context
1581 \param buf Buffer to store data in
1582 \param size Size of the buffer
1584 \retval -666: USB device unavailable
1585 \retval <0: error code from libusb_bulk_transfer()
1586 \retval 0: no data was available
1587 \retval >0: number of bytes read
1590 int ftdi_read_data(struct ftdi_context *ftdi, unsigned char *buf, int size)
1592 int offset = 0, ret, i, num_of_chunks, chunk_remains;
1593 int packet_size = ftdi->max_packet_size;
1594 int actual_length = 1;
1596 if (ftdi == NULL || ftdi->usb_dev == NULL)
1597 ftdi_error_return(-666, "USB device unavailable");
1599 // Packet size sanity check (avoid division by zero)
1600 if (packet_size == 0)
1601 ftdi_error_return(-1, "max_packet_size is bogus (zero)");
1603 // everything we want is still in the readbuffer?
1604 if (size <= ftdi->readbuffer_remaining)
1606 memcpy (buf, ftdi->readbuffer+ftdi->readbuffer_offset, size);
1609 ftdi->readbuffer_remaining -= size;
1610 ftdi->readbuffer_offset += size;
1612 /* printf("Returning bytes from buffer: %d - remaining: %d\n", size, ftdi->readbuffer_remaining); */
1616 // something still in the readbuffer, but not enough to satisfy 'size'?
1617 if (ftdi->readbuffer_remaining != 0)
1619 memcpy (buf, ftdi->readbuffer+ftdi->readbuffer_offset, ftdi->readbuffer_remaining);
1622 offset += ftdi->readbuffer_remaining;
1624 // do the actual USB read
1625 while (offset < size && actual_length > 0)
1627 ftdi->readbuffer_remaining = 0;
1628 ftdi->readbuffer_offset = 0;
1629 /* returns how much received */
1630 ret = libusb_bulk_transfer (ftdi->usb_dev, ftdi->out_ep, ftdi->readbuffer, ftdi->readbuffer_chunksize, &actual_length, ftdi->usb_read_timeout);
1632 ftdi_error_return(ret, "usb bulk read failed");
1634 if (actual_length > 2)
1636 // skip FTDI status bytes.
1637 // Maybe stored in the future to enable modem use
1638 num_of_chunks = actual_length / packet_size;
1639 chunk_remains = actual_length % packet_size;
1640 //printf("actual_length = %X, num_of_chunks = %X, chunk_remains = %X, readbuffer_offset = %X\n", actual_length, num_of_chunks, chunk_remains, ftdi->readbuffer_offset);
1642 ftdi->readbuffer_offset += 2;
1645 if (actual_length > packet_size - 2)
1647 for (i = 1; i < num_of_chunks; i++)
1648 memmove (ftdi->readbuffer+ftdi->readbuffer_offset+(packet_size - 2)*i,
1649 ftdi->readbuffer+ftdi->readbuffer_offset+packet_size*i,
1651 if (chunk_remains > 2)
1653 memmove (ftdi->readbuffer+ftdi->readbuffer_offset+(packet_size - 2)*i,
1654 ftdi->readbuffer+ftdi->readbuffer_offset+packet_size*i,
1656 actual_length -= 2*num_of_chunks;
1659 actual_length -= 2*(num_of_chunks-1)+chunk_remains;
1662 else if (actual_length <= 2)
1664 // no more data to read?
1667 if (actual_length > 0)
1669 // data still fits in buf?
1670 if (offset+actual_length <= size)
1672 memcpy (buf+offset, ftdi->readbuffer+ftdi->readbuffer_offset, actual_length);
1673 //printf("buf[0] = %X, buf[1] = %X\n", buf[0], buf[1]);
1674 offset += actual_length;
1676 /* Did we read exactly the right amount of bytes? */
1678 //printf("read_data exact rem %d offset %d\n",
1679 //ftdi->readbuffer_remaining, offset);
1684 // only copy part of the data or size <= readbuffer_chunksize
1685 int part_size = size-offset;
1686 memcpy (buf+offset, ftdi->readbuffer+ftdi->readbuffer_offset, part_size);
1688 ftdi->readbuffer_offset += part_size;
1689 ftdi->readbuffer_remaining = actual_length-part_size;
1690 offset += part_size;
1692 /* printf("Returning part: %d - size: %d - offset: %d - actual_length: %d - remaining: %d\n",
1693 part_size, size, offset, actual_length, ftdi->readbuffer_remaining); */
1704 Configure read buffer chunk size.
1707 Automatically reallocates the buffer.
1709 \param ftdi pointer to ftdi_context
1710 \param chunksize Chunk size
1713 \retval -1: ftdi context invalid
1715 int ftdi_read_data_set_chunksize(struct ftdi_context *ftdi, unsigned int chunksize)
1717 unsigned char *new_buf;
1720 ftdi_error_return(-1, "ftdi context invalid");
1722 // Invalidate all remaining data
1723 ftdi->readbuffer_offset = 0;
1724 ftdi->readbuffer_remaining = 0;
1726 /* We can't set readbuffer_chunksize larger than MAX_BULK_BUFFER_LENGTH,
1727 which is defined in libusb-1.0. Otherwise, each USB read request will
1728 be divided into multiple URBs. This will cause issues on Linux kernel
1729 older than 2.6.32. */
1730 if (chunksize > 16384)
1734 if ((new_buf = (unsigned char *)realloc(ftdi->readbuffer, chunksize)) == NULL)
1735 ftdi_error_return(-1, "out of memory for readbuffer");
1737 ftdi->readbuffer = new_buf;
1738 ftdi->readbuffer_chunksize = chunksize;
1744 Get read buffer chunk size.
1746 \param ftdi pointer to ftdi_context
1747 \param chunksize Pointer to store chunk size in
1750 \retval -1: FTDI context invalid
1752 int ftdi_read_data_get_chunksize(struct ftdi_context *ftdi, unsigned int *chunksize)
1755 ftdi_error_return(-1, "FTDI context invalid");
1757 *chunksize = ftdi->readbuffer_chunksize;
1763 Enable bitbang mode.
1765 \deprecated use \ref ftdi_set_bitmode with mode BITMODE_BITBANG instead
1767 \param ftdi pointer to ftdi_context
1768 \param bitmask Bitmask to configure lines.
1769 HIGH/ON value configures a line as output.
1772 \retval -1: can't enable bitbang mode
1773 \retval -2: USB device unavailable
1775 int ftdi_enable_bitbang(struct ftdi_context *ftdi, unsigned char bitmask)
1777 unsigned short usb_val;
1779 if (ftdi == NULL || ftdi->usb_dev == NULL)
1780 ftdi_error_return(-2, "USB device unavailable");
1782 usb_val = bitmask; // low byte: bitmask
1783 /* FT2232C: Set bitbang_mode to 2 to enable SPI */
1784 usb_val |= (ftdi->bitbang_mode << 8);
1786 if (libusb_control_transfer(ftdi->usb_dev, FTDI_DEVICE_OUT_REQTYPE,
1787 SIO_SET_BITMODE_REQUEST, usb_val, ftdi->index,
1788 NULL, 0, ftdi->usb_write_timeout) < 0)
1789 ftdi_error_return(-1, "unable to enter bitbang mode. Perhaps not a BM type chip?");
1791 ftdi->bitbang_enabled = 1;
1796 Disable bitbang mode.
1798 \param ftdi pointer to ftdi_context
1801 \retval -1: can't disable bitbang mode
1802 \retval -2: USB device unavailable
1804 int ftdi_disable_bitbang(struct ftdi_context *ftdi)
1806 if (ftdi == NULL || ftdi->usb_dev == NULL)
1807 ftdi_error_return(-2, "USB device unavailable");
1809 if (libusb_control_transfer(ftdi->usb_dev, FTDI_DEVICE_OUT_REQTYPE, SIO_SET_BITMODE_REQUEST, 0, ftdi->index, NULL, 0, ftdi->usb_write_timeout) < 0)
1810 ftdi_error_return(-1, "unable to leave bitbang mode. Perhaps not a BM type chip?");
1812 ftdi->bitbang_enabled = 0;
1817 Enable/disable bitbang modes.
1819 \param ftdi pointer to ftdi_context
1820 \param bitmask Bitmask to configure lines.
1821 HIGH/ON value configures a line as output.
1822 \param mode Bitbang mode: use the values defined in \ref ftdi_mpsse_mode
1825 \retval -1: can't enable bitbang mode
1826 \retval -2: USB device unavailable
1828 int ftdi_set_bitmode(struct ftdi_context *ftdi, unsigned char bitmask, unsigned char mode)
1830 unsigned short usb_val;
1832 if (ftdi == NULL || ftdi->usb_dev == NULL)
1833 ftdi_error_return(-2, "USB device unavailable");
1835 usb_val = bitmask; // low byte: bitmask
1836 usb_val |= (mode << 8);
1837 if (libusb_control_transfer(ftdi->usb_dev, FTDI_DEVICE_OUT_REQTYPE, SIO_SET_BITMODE_REQUEST, usb_val, ftdi->index, NULL, 0, ftdi->usb_write_timeout) < 0)
1838 ftdi_error_return(-1, "unable to configure bitbang mode. Perhaps not a 2232C type chip?");
1840 ftdi->bitbang_mode = mode;
1841 ftdi->bitbang_enabled = (mode == BITMODE_RESET) ? 0 : 1;
1846 Directly read pin state, circumventing the read buffer. Useful for bitbang mode.
1848 \param ftdi pointer to ftdi_context
1849 \param pins Pointer to store pins into
1852 \retval -1: read pins failed
1853 \retval -2: USB device unavailable
1855 int ftdi_read_pins(struct ftdi_context *ftdi, unsigned char *pins)
1857 if (ftdi == NULL || ftdi->usb_dev == NULL)
1858 ftdi_error_return(-2, "USB device unavailable");
1860 if (libusb_control_transfer(ftdi->usb_dev, FTDI_DEVICE_IN_REQTYPE, SIO_READ_PINS_REQUEST, 0, ftdi->index, (unsigned char *)pins, 1, ftdi->usb_read_timeout) != 1)
1861 ftdi_error_return(-1, "read pins failed");
1869 The FTDI chip keeps data in the internal buffer for a specific
1870 amount of time if the buffer is not full yet to decrease
1871 load on the usb bus.
1873 \param ftdi pointer to ftdi_context
1874 \param latency Value between 1 and 255
1877 \retval -1: latency out of range
1878 \retval -2: unable to set latency timer
1879 \retval -3: USB device unavailable
1881 int ftdi_set_latency_timer(struct ftdi_context *ftdi, unsigned char latency)
1883 unsigned short usb_val;
1886 ftdi_error_return(-1, "latency out of range. Only valid for 1-255");
1888 if (ftdi == NULL || ftdi->usb_dev == NULL)
1889 ftdi_error_return(-3, "USB device unavailable");
1892 if (libusb_control_transfer(ftdi->usb_dev, FTDI_DEVICE_OUT_REQTYPE, SIO_SET_LATENCY_TIMER_REQUEST, usb_val, ftdi->index, NULL, 0, ftdi->usb_write_timeout) < 0)
1893 ftdi_error_return(-2, "unable to set latency timer");
1901 \param ftdi pointer to ftdi_context
1902 \param latency Pointer to store latency value in
1905 \retval -1: unable to get latency timer
1906 \retval -2: USB device unavailable
1908 int ftdi_get_latency_timer(struct ftdi_context *ftdi, unsigned char *latency)
1910 unsigned short usb_val;
1912 if (ftdi == NULL || ftdi->usb_dev == NULL)
1913 ftdi_error_return(-2, "USB device unavailable");
1915 if (libusb_control_transfer(ftdi->usb_dev, FTDI_DEVICE_IN_REQTYPE, SIO_GET_LATENCY_TIMER_REQUEST, 0, ftdi->index, (unsigned char *)&usb_val, 1, ftdi->usb_read_timeout) != 1)
1916 ftdi_error_return(-1, "reading latency timer failed");
1918 *latency = (unsigned char)usb_val;
1923 Poll modem status information
1925 This function allows the retrieve the two status bytes of the device.
1926 The device sends these bytes also as a header for each read access
1927 where they are discarded by ftdi_read_data(). The chip generates
1928 the two stripped status bytes in the absence of data every 40 ms.
1930 Layout of the first byte:
1931 - B0..B3 - must be 0
1932 - B4 Clear to send (CTS)
1935 - B5 Data set ready (DTS)
1938 - B6 Ring indicator (RI)
1941 - B7 Receive line signal detect (RLSD)
1945 Layout of the second byte:
1946 - B0 Data ready (DR)
1947 - B1 Overrun error (OE)
1948 - B2 Parity error (PE)
1949 - B3 Framing error (FE)
1950 - B4 Break interrupt (BI)
1951 - B5 Transmitter holding register (THRE)
1952 - B6 Transmitter empty (TEMT)
1953 - B7 Error in RCVR FIFO
1955 \param ftdi pointer to ftdi_context
1956 \param status Pointer to store status information in. Must be two bytes.
1959 \retval -1: unable to retrieve status information
1960 \retval -2: USB device unavailable
1962 int ftdi_poll_modem_status(struct ftdi_context *ftdi, unsigned short *status)
1966 if (ftdi == NULL || ftdi->usb_dev == NULL)
1967 ftdi_error_return(-2, "USB device unavailable");
1969 if (libusb_control_transfer(ftdi->usb_dev, FTDI_DEVICE_IN_REQTYPE, SIO_POLL_MODEM_STATUS_REQUEST, 0, ftdi->index, (unsigned char *)usb_val, 2, ftdi->usb_read_timeout) != 2)
1970 ftdi_error_return(-1, "getting modem status failed");
1972 *status = (usb_val[1] << 8) | usb_val[0];
1978 Set flowcontrol for ftdi chip
1980 \param ftdi pointer to ftdi_context
1981 \param flowctrl flow control to use. should be
1982 SIO_DISABLE_FLOW_CTRL, SIO_RTS_CTS_HS, SIO_DTR_DSR_HS or SIO_XON_XOFF_HS
1985 \retval -1: set flow control failed
1986 \retval -2: USB device unavailable
1988 int ftdi_setflowctrl(struct ftdi_context *ftdi, int flowctrl)
1990 if (ftdi == NULL || ftdi->usb_dev == NULL)
1991 ftdi_error_return(-2, "USB device unavailable");
1993 if (libusb_control_transfer(ftdi->usb_dev, FTDI_DEVICE_OUT_REQTYPE,
1994 SIO_SET_FLOW_CTRL_REQUEST, 0, (flowctrl | ftdi->index),
1995 NULL, 0, ftdi->usb_write_timeout) < 0)
1996 ftdi_error_return(-1, "set flow control failed");
2004 \param ftdi pointer to ftdi_context
2005 \param state state to set line to (1 or 0)
2008 \retval -1: set dtr failed
2009 \retval -2: USB device unavailable
2011 int ftdi_setdtr(struct ftdi_context *ftdi, int state)
2013 unsigned short usb_val;
2015 if (ftdi == NULL || ftdi->usb_dev == NULL)
2016 ftdi_error_return(-2, "USB device unavailable");
2019 usb_val = SIO_SET_DTR_HIGH;
2021 usb_val = SIO_SET_DTR_LOW;
2023 if (libusb_control_transfer(ftdi->usb_dev, FTDI_DEVICE_OUT_REQTYPE,
2024 SIO_SET_MODEM_CTRL_REQUEST, usb_val, ftdi->index,
2025 NULL, 0, ftdi->usb_write_timeout) < 0)
2026 ftdi_error_return(-1, "set dtr failed");
2034 \param ftdi pointer to ftdi_context
2035 \param state state to set line to (1 or 0)
2038 \retval -1: set rts failed
2039 \retval -2: USB device unavailable
2041 int ftdi_setrts(struct ftdi_context *ftdi, int state)
2043 unsigned short usb_val;
2045 if (ftdi == NULL || ftdi->usb_dev == NULL)
2046 ftdi_error_return(-2, "USB device unavailable");
2049 usb_val = SIO_SET_RTS_HIGH;
2051 usb_val = SIO_SET_RTS_LOW;
2053 if (libusb_control_transfer(ftdi->usb_dev, FTDI_DEVICE_OUT_REQTYPE,
2054 SIO_SET_MODEM_CTRL_REQUEST, usb_val, ftdi->index,
2055 NULL, 0, ftdi->usb_write_timeout) < 0)
2056 ftdi_error_return(-1, "set of rts failed");
2062 Set dtr and rts line in one pass
2064 \param ftdi pointer to ftdi_context
2065 \param dtr DTR state to set line to (1 or 0)
2066 \param rts RTS state to set line to (1 or 0)
2069 \retval -1: set dtr/rts failed
2070 \retval -2: USB device unavailable
2072 int ftdi_setdtr_rts(struct ftdi_context *ftdi, int dtr, int rts)
2074 unsigned short usb_val;
2076 if (ftdi == NULL || ftdi->usb_dev == NULL)
2077 ftdi_error_return(-2, "USB device unavailable");
2080 usb_val = SIO_SET_DTR_HIGH;
2082 usb_val = SIO_SET_DTR_LOW;
2085 usb_val |= SIO_SET_RTS_HIGH;
2087 usb_val |= SIO_SET_RTS_LOW;
2089 if (libusb_control_transfer(ftdi->usb_dev, FTDI_DEVICE_OUT_REQTYPE,
2090 SIO_SET_MODEM_CTRL_REQUEST, usb_val, ftdi->index,
2091 NULL, 0, ftdi->usb_write_timeout) < 0)
2092 ftdi_error_return(-1, "set of rts/dtr failed");
2098 Set the special event character
2100 \param ftdi pointer to ftdi_context
2101 \param eventch Event character
2102 \param enable 0 to disable the event character, non-zero otherwise
2105 \retval -1: unable to set event character
2106 \retval -2: USB device unavailable
2108 int ftdi_set_event_char(struct ftdi_context *ftdi,
2109 unsigned char eventch, unsigned char enable)
2111 unsigned short usb_val;
2113 if (ftdi == NULL || ftdi->usb_dev == NULL)
2114 ftdi_error_return(-2, "USB device unavailable");
2120 if (libusb_control_transfer(ftdi->usb_dev, FTDI_DEVICE_OUT_REQTYPE, SIO_SET_EVENT_CHAR_REQUEST, usb_val, ftdi->index, NULL, 0, ftdi->usb_write_timeout) < 0)
2121 ftdi_error_return(-1, "setting event character failed");
2129 \param ftdi pointer to ftdi_context
2130 \param errorch Error character
2131 \param enable 0 to disable the error character, non-zero otherwise
2134 \retval -1: unable to set error character
2135 \retval -2: USB device unavailable
2137 int ftdi_set_error_char(struct ftdi_context *ftdi,
2138 unsigned char errorch, unsigned char enable)
2140 unsigned short usb_val;
2142 if (ftdi == NULL || ftdi->usb_dev == NULL)
2143 ftdi_error_return(-2, "USB device unavailable");
2149 if (libusb_control_transfer(ftdi->usb_dev, FTDI_DEVICE_OUT_REQTYPE, SIO_SET_ERROR_CHAR_REQUEST, usb_val, ftdi->index, NULL, 0, ftdi->usb_write_timeout) < 0)
2150 ftdi_error_return(-1, "setting error character failed");
2158 \param ftdi pointer to ftdi_context
2159 \param eeprom Pointer to ftdi_eeprom
2163 void ftdi_eeprom_setsize(struct ftdi_context *ftdi, struct ftdi_eeprom *eeprom, int size)
2168 ftdi->eeprom = eeprom;
2169 ftdi->eeprom->size=size;
2173 Init eeprom with default values.
2175 \param eeprom Pointer to ftdi_eeprom
2177 void ftdi_eeprom_initdefaults(struct ftdi_context *ftdi)
2180 struct ftdi_eeprom *eeprom;
2185 if (ftdi->eeprom == NULL)
2188 eeprom = ftdi->eeprom;
2190 eeprom->vendor_id = 0x0403;
2191 eeprom->product_id = 0x6001;
2193 eeprom->self_powered = 1;
2194 eeprom->remote_wakeup = 1;
2195 eeprom->chip_type = TYPE_BM;
2197 eeprom->in_is_isochronous = 0;
2198 eeprom->out_is_isochronous = 0;
2199 eeprom->suspend_pull_downs = 0;
2201 eeprom->use_serial = 0;
2202 eeprom->change_usb_version = 0;
2203 eeprom->usb_version = 0x0200;
2204 eeprom->max_power = 0;
2206 eeprom->manufacturer = NULL;
2207 eeprom->product = NULL;
2208 eeprom->serial = NULL;
2209 for (i=0; i < 5; i++)
2211 eeprom->cbus_function[i] = 0;
2213 eeprom->high_current = 0;
2216 eeprom->size = FTDI_DEFAULT_EEPROM_SIZE;
2220 Frees allocated memory in eeprom.
2222 \param eeprom Pointer to ftdi_eeprom
2224 void ftdi_eeprom_free(struct ftdi_context *ftdi)
2230 struct ftdi_eeprom *eeprom = ftdi->eeprom;
2232 if (eeprom->manufacturer != 0) {
2233 free(eeprom->manufacturer);
2234 eeprom->manufacturer = 0;
2236 if (eeprom->product != 0) {
2237 free(eeprom->product);
2238 eeprom->product = 0;
2240 if (eeprom->serial != 0) {
2241 free(eeprom->serial);
2248 Build binary output from ftdi_eeprom structure.
2249 Output is suitable for ftdi_write_eeprom().
2251 \note This function doesn't handle FT2232x devices. Only FT232x.
2252 \param eeprom Pointer to ftdi_eeprom
2253 \param output Buffer of 128 bytes to store eeprom image to
2255 \retval >0: free eeprom size
2256 \retval -1: eeprom size (128 bytes) exceeded by custom strings
2257 \retval -2: Invalid eeprom pointer
2258 \retval -3: Invalid cbus function setting
2259 \retval -4: Chip doesn't support invert
2260 \retval -5: Chip doesn't support high current drive
2262 int ftdi_eeprom_build(struct ftdi_context *ftdi, unsigned char *output)
2265 unsigned short checksum, value;
2266 unsigned char manufacturer_size = 0, product_size = 0, serial_size = 0;
2268 const int cbus_max[5] = {13, 13, 13, 13, 9};
2269 struct ftdi_eeprom *eeprom;
2272 ftdi_error_return(-2,"No context");
2273 if (ftdi->eeprom == NULL)
2274 ftdi_error_return(-2,"No eeprom structure");
2276 eeprom= ftdi->eeprom;
2278 if (eeprom->manufacturer != NULL)
2279 manufacturer_size = strlen(eeprom->manufacturer);
2280 if (eeprom->product != NULL)
2281 product_size = strlen(eeprom->product);
2282 if (eeprom->serial != NULL)
2283 serial_size = strlen(eeprom->serial);
2285 // highest allowed cbus value
2286 for (i = 0; i < 5; i++)
2288 if ((eeprom->cbus_function[i] > cbus_max[i]) ||
2289 (eeprom->cbus_function[i] && eeprom->chip_type != TYPE_R)) return -3;
2291 if (eeprom->chip_type != TYPE_R)
2293 if (eeprom->invert) return -4;
2294 if (eeprom->high_current) return -5;
2297 size_check = eeprom->size;
2298 size_check -= 28; // 28 are always in use (fixed)
2300 // Top half of a 256byte eeprom is used just for strings and checksum
2301 // it seems that the FTDI chip will not read these strings from the lower half
2302 // Each string starts with two bytes; offset and type (0x03 for string)
2303 // the checksum needs two bytes, so without the string data that 8 bytes from the top half
2304 if (eeprom->size>=256) size_check = 120;
2305 size_check -= manufacturer_size*2;
2306 size_check -= product_size*2;
2307 size_check -= serial_size*2;
2309 // eeprom size exceeded?
2314 memset (output, 0, eeprom->size);
2316 // Addr 00: High current IO
2317 output[0x00] = eeprom->high_current ? HIGH_CURRENT_DRIVE : 0;
2318 // Addr 01: IN endpoint size (for R type devices, different for FT2232)
2319 if (eeprom->chip_type == TYPE_R) {
2320 output[0x01] = 0x40;
2322 // Addr 02: Vendor ID
2323 output[0x02] = eeprom->vendor_id;
2324 output[0x03] = eeprom->vendor_id >> 8;
2326 // Addr 04: Product ID
2327 output[0x04] = eeprom->product_id;
2328 output[0x05] = eeprom->product_id >> 8;
2330 // Addr 06: Device release number (0400h for BM features)
2331 output[0x06] = 0x00;
2332 switch (eeprom->chip_type) {
2334 output[0x07] = 0x02;
2337 output[0x07] = 0x04;
2340 output[0x07] = 0x05;
2343 output[0x07] = 0x06;
2346 output[0x07] = 0x00;
2349 // Addr 08: Config descriptor
2351 // Bit 6: 1 if this device is self powered, 0 if bus powered
2352 // Bit 5: 1 if this device uses remote wakeup
2353 // Bit 4: 1 if this device is battery powered
2355 if (eeprom->self_powered == 1)
2357 if (eeprom->remote_wakeup == 1)
2361 // Addr 09: Max power consumption: max power = value * 2 mA
2362 output[0x09] = eeprom->max_power;
2364 // Addr 0A: Chip configuration
2365 // Bit 7: 0 - reserved
2366 // Bit 6: 0 - reserved
2367 // Bit 5: 0 - reserved
2368 // Bit 4: 1 - Change USB version
2369 // Bit 3: 1 - Use the serial number string
2370 // Bit 2: 1 - Enable suspend pull downs for lower power
2371 // Bit 1: 1 - Out EndPoint is Isochronous
2372 // Bit 0: 1 - In EndPoint is Isochronous
2375 if (eeprom->in_is_isochronous == 1)
2377 if (eeprom->out_is_isochronous == 1)
2379 if (eeprom->suspend_pull_downs == 1)
2381 if (eeprom->use_serial == 1)
2383 if (eeprom->change_usb_version == 1)
2387 // Addr 0B: Invert data lines
2388 output[0x0B] = eeprom->invert & 0xff;
2390 // Addr 0C: USB version low byte when 0x0A bit 4 is set
2391 // Addr 0D: USB version high byte when 0x0A bit 4 is set
2392 if (eeprom->change_usb_version == 1)
2394 output[0x0C] = eeprom->usb_version;
2395 output[0x0D] = eeprom->usb_version >> 8;
2399 // Addr 0E: Offset of the manufacturer string + 0x80, calculated later
2400 // Addr 0F: Length of manufacturer string
2401 output[0x0F] = manufacturer_size*2 + 2;
2403 // Addr 10: Offset of the product string + 0x80, calculated later
2404 // Addr 11: Length of product string
2405 output[0x11] = product_size*2 + 2;
2407 // Addr 12: Offset of the serial string + 0x80, calculated later
2408 // Addr 13: Length of serial string
2409 output[0x13] = serial_size*2 + 2;
2411 // Addr 14: CBUS function: CBUS0, CBUS1
2412 // Addr 15: CBUS function: CBUS2, CBUS3
2413 // Addr 16: CBUS function: CBUS5
2414 output[0x14] = eeprom->cbus_function[0] | (eeprom->cbus_function[1] << 4);
2415 output[0x15] = eeprom->cbus_function[2] | (eeprom->cbus_function[3] << 4);
2416 output[0x16] = eeprom->cbus_function[4];
2420 // In images produced by FTDI's FT_Prog for FT232R strings start at 0x18
2421 // Space till 0x18 should be considered as reserved.
2422 if (eeprom->chip_type >= TYPE_R) {
2427 if (eeprom->size >= 256) i = 0x80;
2430 // Output manufacturer
2431 output[0x0E] = i | 0x80; // calculate offset
2432 output[i++] = manufacturer_size*2 + 2;
2433 output[i++] = 0x03; // type: string
2434 for (j = 0; j < manufacturer_size; j++)
2436 output[i] = eeprom->manufacturer[j], i++;
2437 output[i] = 0x00, i++;
2440 // Output product name
2441 output[0x10] = i | 0x80; // calculate offset
2442 output[i] = product_size*2 + 2, i++;
2443 output[i] = 0x03, i++;
2444 for (j = 0; j < product_size; j++)
2446 output[i] = eeprom->product[j], i++;
2447 output[i] = 0x00, i++;
2451 output[0x12] = i | 0x80; // calculate offset
2452 output[i] = serial_size*2 + 2, i++;
2453 output[i] = 0x03, i++;
2454 for (j = 0; j < serial_size; j++)
2456 output[i] = eeprom->serial[j], i++;
2457 output[i] = 0x00, i++;
2460 // calculate checksum
2463 for (i = 0; i < eeprom->size/2-1; i++)
2465 value = output[i*2];
2466 value += output[(i*2)+1] << 8;
2468 checksum = value^checksum;
2469 checksum = (checksum << 1) | (checksum >> 15);
2472 output[eeprom->size-2] = checksum;
2473 output[eeprom->size-1] = checksum >> 8;
2479 Decode binary EEPROM image into an ftdi_eeprom structure.
2481 \param eeprom Pointer to ftdi_eeprom which will be filled in.
2482 \param buf Buffer of \a size bytes of raw eeprom data
2483 \param size size size of eeprom data in bytes
2486 \retval -1: something went wrong
2488 FIXME: How to pass size? How to handle size field in ftdi_eeprom?
2489 FIXME: Strings are malloc'ed here and should be freed somewhere
2491 int ftdi_eeprom_decode(struct ftdi_context *ftdi, unsigned char *buf, int size)
2494 unsigned short checksum, eeprom_checksum, value;
2495 unsigned char manufacturer_size = 0, product_size = 0, serial_size = 0;
2496 int eeprom_size = 128;
2497 struct ftdi_eeprom *eeprom;
2500 ftdi_error_return(-1,"No context");
2501 if (ftdi->eeprom == NULL)
2502 ftdi_error_return(-1,"No eeprom");
2504 eeprom = ftdi->eeprom;
2506 size_check = eeprom->size;
2507 size_check -= 28; // 28 are always in use (fixed)
2509 // Top half of a 256byte eeprom is used just for strings and checksum
2510 // it seems that the FTDI chip will not read these strings from the lower half
2511 // Each string starts with two bytes; offset and type (0x03 for string)
2512 // the checksum needs two bytes, so without the string data that 8 bytes from the top half
2513 if (eeprom->size>=256)size_check = 120;
2514 size_check -= manufacturer_size*2;
2515 size_check -= product_size*2;
2516 size_check -= serial_size*2;
2518 // eeprom size exceeded?
2520 ftdi_error_return(-1,"Size check failed");
2523 // empty eeprom struct
2524 memset(eeprom, 0, sizeof(struct ftdi_eeprom));
2526 // Addr 00: High current IO
2527 eeprom->high_current = (buf[0x02] & HIGH_CURRENT_DRIVE);
2529 // Addr 02: Vendor ID
2530 eeprom->vendor_id = buf[0x02] + (buf[0x03] << 8);
2532 // Addr 04: Product ID
2533 eeprom->product_id = buf[0x04] + (buf[0x05] << 8);
2535 value = buf[0x06] + (buf[0x07]<<8);
2539 eeprom->chip_type = TYPE_R;
2542 eeprom->chip_type = TYPE_BM;
2545 eeprom->chip_type = TYPE_AM;
2547 default: // Unknown device
2548 eeprom->chip_type = 0;
2552 // Addr 08: Config descriptor
2554 // Bit 6: 1 if this device is self powered, 0 if bus powered
2555 // Bit 5: 1 if this device uses remote wakeup
2556 // Bit 4: 1 if this device is battery powered
2558 if (j&0x40) eeprom->self_powered = 1;
2559 if (j&0x20) eeprom->remote_wakeup = 1;
2561 // Addr 09: Max power consumption: max power = value * 2 mA
2562 eeprom->max_power = buf[0x09];
2564 // Addr 0A: Chip configuration
2565 // Bit 7: 0 - reserved
2566 // Bit 6: 0 - reserved
2567 // Bit 5: 0 - reserved
2568 // Bit 4: 1 - Change USB version
2569 // Bit 3: 1 - Use the serial number string
2570 // Bit 2: 1 - Enable suspend pull downs for lower power
2571 // Bit 1: 1 - Out EndPoint is Isochronous
2572 // Bit 0: 1 - In EndPoint is Isochronous
2575 if (j&0x01) eeprom->in_is_isochronous = 1;
2576 if (j&0x02) eeprom->out_is_isochronous = 1;
2577 if (j&0x04) eeprom->suspend_pull_downs = 1;
2578 if (j&0x08) eeprom->use_serial = 1;
2579 if (j&0x10) eeprom->change_usb_version = 1;
2581 // Addr 0B: Invert data lines
2582 eeprom->invert = buf[0x0B];
2584 // Addr 0C: USB version low byte when 0x0A bit 4 is set
2585 // Addr 0D: USB version high byte when 0x0A bit 4 is set
2586 if (eeprom->change_usb_version == 1)
2588 eeprom->usb_version = buf[0x0C] + (buf[0x0D] << 8);
2591 // Addr 0E: Offset of the manufacturer string + 0x80, calculated later
2592 // Addr 0F: Length of manufacturer string
2593 manufacturer_size = buf[0x0F]/2;
2594 if (manufacturer_size > 0) eeprom->manufacturer = malloc(manufacturer_size);
2595 else eeprom->manufacturer = NULL;
2597 // Addr 10: Offset of the product string + 0x80, calculated later
2598 // Addr 11: Length of product string
2599 product_size = buf[0x11]/2;
2600 if (product_size > 0) eeprom->product = malloc(product_size);
2601 else eeprom->product = NULL;
2603 // Addr 12: Offset of the serial string + 0x80, calculated later
2604 // Addr 13: Length of serial string
2605 serial_size = buf[0x13]/2;
2606 if (serial_size > 0) eeprom->serial = malloc(serial_size);
2607 else eeprom->serial = NULL;
2609 // Addr 14: CBUS function: CBUS0, CBUS1
2610 // Addr 15: CBUS function: CBUS2, CBUS3
2611 // Addr 16: CBUS function: CBUS5
2612 if (eeprom->chip_type == TYPE_R) {
2613 eeprom->cbus_function[0] = buf[0x14] & 0x0f;
2614 eeprom->cbus_function[1] = (buf[0x14] >> 4) & 0x0f;
2615 eeprom->cbus_function[2] = buf[0x15] & 0x0f;
2616 eeprom->cbus_function[3] = (buf[0x15] >> 4) & 0x0f;
2617 eeprom->cbus_function[4] = buf[0x16] & 0x0f;
2619 for (j=0; j<5; j++) eeprom->cbus_function[j] = 0;
2622 // Decode manufacturer
2623 i = buf[0x0E] & 0x7f; // offset
2624 for (j=0;j<manufacturer_size-1;j++)
2626 eeprom->manufacturer[j] = buf[2*j+i+2];
2628 eeprom->manufacturer[j] = '\0';
2630 // Decode product name
2631 i = buf[0x10] & 0x7f; // offset
2632 for (j=0;j<product_size-1;j++)
2634 eeprom->product[j] = buf[2*j+i+2];
2636 eeprom->product[j] = '\0';
2639 i = buf[0x12] & 0x7f; // offset
2640 for (j=0;j<serial_size-1;j++)
2642 eeprom->serial[j] = buf[2*j+i+2];
2644 eeprom->serial[j] = '\0';
2649 for (i = 0; i < eeprom_size/2-1; i++)
2652 value += buf[(i*2)+1] << 8;
2654 checksum = value^checksum;
2655 checksum = (checksum << 1) | (checksum >> 15);
2658 eeprom_checksum = buf[eeprom_size-2] + (buf[eeprom_size-1] << 8);
2660 if (eeprom_checksum != checksum)
2662 fprintf(stderr, "Checksum Error: %04x %04x\n", checksum, eeprom_checksum);
2663 ftdi_error_return(-1,"EEPROM checksum error");
2670 Read eeprom location
2672 \param ftdi pointer to ftdi_context
2673 \param eeprom_addr Address of eeprom location to be read
2674 \param eeprom_val Pointer to store read eeprom location
2677 \retval -1: read failed
2678 \retval -2: USB device unavailable
2680 int ftdi_read_eeprom_location (struct ftdi_context *ftdi, int eeprom_addr, unsigned short *eeprom_val)
2682 if (ftdi == NULL || ftdi->usb_dev == NULL)
2683 ftdi_error_return(-2, "USB device unavailable");
2685 if (libusb_control_transfer(ftdi->usb_dev, FTDI_DEVICE_IN_REQTYPE, SIO_READ_EEPROM_REQUEST, 0, eeprom_addr, (unsigned char *)eeprom_val, 2, ftdi->usb_read_timeout) != 2)
2686 ftdi_error_return(-1, "reading eeprom failed");
2694 \param ftdi pointer to ftdi_context
2695 \param eeprom Pointer to store eeprom into
2698 \retval -1: read failed
2699 \retval -2: USB device unavailable
2701 int ftdi_read_eeprom(struct ftdi_context *ftdi, unsigned char *eeprom)
2705 if (ftdi == NULL || ftdi->usb_dev == NULL)
2706 ftdi_error_return(-2, "USB device unavailable");
2708 for (i = 0; i < ftdi->eeprom->size/2; i++)
2710 if (libusb_control_transfer(ftdi->usb_dev, FTDI_DEVICE_IN_REQTYPE, SIO_READ_EEPROM_REQUEST, 0, i, eeprom+(i*2), 2, ftdi->usb_read_timeout) != 2)
2711 ftdi_error_return(-1, "reading eeprom failed");
2718 ftdi_read_chipid_shift does the bitshift operation needed for the FTDIChip-ID
2719 Function is only used internally
2722 static unsigned char ftdi_read_chipid_shift(unsigned char value)
2724 return ((value & 1) << 1) |
2725 ((value & 2) << 5) |
2726 ((value & 4) >> 2) |
2727 ((value & 8) << 4) |
2728 ((value & 16) >> 1) |
2729 ((value & 32) >> 1) |
2730 ((value & 64) >> 4) |
2731 ((value & 128) >> 2);
2735 Read the FTDIChip-ID from R-type devices
2737 \param ftdi pointer to ftdi_context
2738 \param chipid Pointer to store FTDIChip-ID
2741 \retval -1: read failed
2742 \retval -2: USB device unavailable
2744 int ftdi_read_chipid(struct ftdi_context *ftdi, unsigned int *chipid)
2746 unsigned int a = 0, b = 0;
2748 if (ftdi == NULL || ftdi->usb_dev == NULL)
2749 ftdi_error_return(-2, "USB device unavailable");
2751 if (libusb_control_transfer(ftdi->usb_dev, FTDI_DEVICE_IN_REQTYPE, SIO_READ_EEPROM_REQUEST, 0, 0x43, (unsigned char *)&a, 2, ftdi->usb_read_timeout) == 2)
2753 a = a << 8 | a >> 8;
2754 if (libusb_control_transfer(ftdi->usb_dev, FTDI_DEVICE_IN_REQTYPE, SIO_READ_EEPROM_REQUEST, 0, 0x44, (unsigned char *)&b, 2, ftdi->usb_read_timeout) == 2)
2756 b = b << 8 | b >> 8;
2757 a = (a << 16) | (b & 0xFFFF);
2758 a = ftdi_read_chipid_shift(a) | ftdi_read_chipid_shift(a>>8)<<8
2759 | ftdi_read_chipid_shift(a>>16)<<16 | ftdi_read_chipid_shift(a>>24)<<24;
2760 *chipid = a ^ 0xa5f0f7d1;
2765 ftdi_error_return(-1, "read of FTDIChip-ID failed");
2769 Guesses size of eeprom by reading eeprom and comparing halves - will not work with blank eeprom
2770 Call this function then do a write then call again to see if size changes, if so write again.
2772 \param ftdi pointer to ftdi_context
2773 \param eeprom Pointer to store eeprom into
2774 \param maxsize the size of the buffer to read into
2776 \retval -1: eeprom read failed
2777 \retval -2: USB device unavailable
2778 \retval >=0: size of eeprom
2780 int ftdi_read_eeprom_getsize(struct ftdi_context *ftdi, unsigned char *eeprom, int maxsize)
2782 int i=0,j,minsize=32;
2785 if (ftdi == NULL || ftdi->usb_dev == NULL)
2786 ftdi_error_return(-2, "USB device unavailable");
2790 for (j = 0; i < maxsize/2 && j<size; j++)
2792 if (libusb_control_transfer(ftdi->usb_dev, FTDI_DEVICE_IN_REQTYPE,
2793 SIO_READ_EEPROM_REQUEST, 0, i,
2794 eeprom+(i*2), 2, ftdi->usb_read_timeout) != 2)
2795 ftdi_error_return(-1, "eeprom read failed");
2800 while (size<=maxsize && memcmp(eeprom,&eeprom[size/2],size/2)!=0);
2806 Write eeprom location
2808 \param ftdi pointer to ftdi_context
2809 \param eeprom_addr Address of eeprom location to be written
2810 \param eeprom_val Value to be written
2813 \retval -1: read failed
2814 \retval -2: USB device unavailable
2816 int ftdi_write_eeprom_location(struct ftdi_context *ftdi, int eeprom_addr, unsigned short eeprom_val)
2818 if (ftdi == NULL || ftdi->usb_dev == NULL)
2819 ftdi_error_return(-2, "USB device unavailable");
2821 if (libusb_control_transfer(ftdi->usb_dev, FTDI_DEVICE_OUT_REQTYPE,
2822 SIO_WRITE_EEPROM_REQUEST, eeprom_val, eeprom_addr,
2823 NULL, 0, ftdi->usb_write_timeout) != 0)
2824 ftdi_error_return(-1, "unable to write eeprom");
2832 \param ftdi pointer to ftdi_context
2833 \param eeprom Pointer to read eeprom from
2836 \retval -1: read failed
2837 \retval -2: USB device unavailable
2839 int ftdi_write_eeprom(struct ftdi_context *ftdi, unsigned char *eeprom)
2841 unsigned short usb_val, status;
2844 if (ftdi == NULL || ftdi->usb_dev == NULL)
2845 ftdi_error_return(-2, "USB device unavailable");
2847 /* These commands were traced while running MProg */
2848 if ((ret = ftdi_usb_reset(ftdi)) != 0)
2850 if ((ret = ftdi_poll_modem_status(ftdi, &status)) != 0)
2852 if ((ret = ftdi_set_latency_timer(ftdi, 0x77)) != 0)
2855 for (i = 0; i < ftdi->eeprom->size/2; i++)
2857 usb_val = eeprom[i*2];
2858 usb_val += eeprom[(i*2)+1] << 8;
2859 if (libusb_control_transfer(ftdi->usb_dev, FTDI_DEVICE_OUT_REQTYPE,
2860 SIO_WRITE_EEPROM_REQUEST, usb_val, i,
2861 NULL, 0, ftdi->usb_write_timeout) < 0)
2862 ftdi_error_return(-1, "unable to write eeprom");
2871 This is not supported on FT232R/FT245R according to the MProg manual from FTDI.
2873 \param ftdi pointer to ftdi_context
2876 \retval -1: erase failed
2877 \retval -2: USB device unavailable
2879 int ftdi_erase_eeprom(struct ftdi_context *ftdi)
2881 if (ftdi == NULL || ftdi->usb_dev == NULL)
2882 ftdi_error_return(-2, "USB device unavailable");
2884 if (libusb_control_transfer(ftdi->usb_dev, FTDI_DEVICE_OUT_REQTYPE, SIO_ERASE_EEPROM_REQUEST, 0, 0, NULL, 0, ftdi->usb_write_timeout) < 0)
2885 ftdi_error_return(-1, "unable to erase eeprom");
2891 Get string representation for last error code
2893 \param ftdi pointer to ftdi_context
2895 \retval Pointer to error string
2897 char *ftdi_get_error_string (struct ftdi_context *ftdi)
2902 return ftdi->error_str;
2905 /* @} end of doxygen libftdi group */