libftdi Archives
|
From: | Fahrzin Hemmati <fahhem@xxxxxxxxxx> |
---|---|
To: | libftdi@xxxxxxxxxxxxxxxxxxxxxxx |
Date: | Wed, 10 May 2017 21:33:32 -0700 |
No, the bus number and device number (device_address) match the currently-connected device uniquely, and the bus number + port_numbers match the port on which the device is connected (stable across reconnects). The bus number and port_number is unique only if you don't use any USB hubs (and there are none internal to your system). If there are hubs, then you need port_numbers On Wed, May 10, 2017 at 9:25 PM, Maxwell Dreytser <admin@xxxxxxxxx> wrote:
libftdi - see http://www.intra2net.com/en/developer/libftdi for details. |