Re: [EEPROM branch] "size_check" init value

[Xiaofan Chen <xiaofanc@xxxxxxxxx>]

On Sat, Sep 25, 2010 at 7:16 PM, Uwe Bonnes
<bon@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx> wrote:
>>>>>> "Xiaofan" == Xiaofan Chen <xiaofanc@xxxxxxxxx> writes:
>    Xiaofan> 00 00 00 00 00 00 db d6 ........ ........  EEPROM byte[0x0a]
>    Xiaofan> Bit 4 unexpected set. If this happened with the EEPROM
>    Xiaofan> programmed by FTDI tools, please report to
>    Xiaofan> libftdi@xxxxxxxxxxxxxxxxxxxxxxx
>
> can you provide a XML FT_PROG dump of that device too?
>

Here it is.

Word
0000: 1108 0304 D9BC 0005 80FA 1800 0002 9608
0008: 9E36 D412 4600 0803 4C00 4D00 4900 3603
0010: 5300 7400 6500 6C00 6C00 6100 7200 6900
0018: 7300 2000 4500 7600 6100 6C00 7500 6100
0020: 7400 6900 6F00 6E00 2000 4200 6F00 6100
0028: 7200 6400 1203 3000 3700 3000 3200 3000
0030: 3000 4100 3100 0203 0000 A100 0207 0000
0038: 0000 0000 0000 0000 0000 0000 0000 DBD6



<?xml version="1.0" encoding="UTF-8"?>
<FT_EEPROM>
  <Chip_Details>
    <Type>FT2232D/C</Type>
  </Chip_Details>
  <USB_Device_Descriptor>
    <VID_PID>1</VID_PID>
    <idVendor>0403</idVendor>
    <idProduct>BCD9</idProduct>
    <bcdUSB>USB 2.0</bcdUSB>
  </USB_Device_Descriptor>
  <USB_Config_Descriptor>
    <bmAttributes>
      <RemoteWakeupEnabled>false</RemoteWakeupEnabled>
      <SelfPowered>false</SelfPowered>
      <BusPowered>true</BusPowered>
    </bmAttributes>
    <IOpullDown>false</IOpullDown>
    <MaxPower>500</MaxPower>
  </USB_Config_Descriptor>
  <USB_String_Descriptors>
    <Manufacturer>LMI</Manufacturer>
    <Product_Description>Stellaris Evaluation Board</Product_Description>
    <SerialNumber_Enabled>true</SerialNumber_Enabled>
    <SerialNumber>
    </SerialNumber>
    <SerialNumberPrefix>07</SerialNumberPrefix>
  </USB_String_Descriptors>
  <Hardware_Specific>
    <Port_A>
      <Hardware>
        <UART>false</UART>
        <_245FIFO>true</_245FIFO>
        <CPUFIFO>false</CPUFIFO>
        <OPTO>false</OPTO>
        <HighIO>true</HighIO>
      </Hardware>
      <Driver>
        <Virtual_Com_Port>false</Virtual_Com_Port>
        <D2XX_Direct>true</D2XX_Direct>
      </Driver>
    </Port_A>
    <Port_B>
      <Hardware>
        <UART>true</UART>
        <_245FIFO>false</_245FIFO>
        <CPUFIFO>false</CPUFIFO>
        <OPTO>false</OPTO>
        <HighIO>false</HighIO>
      </Hardware>
      <Driver>
        <Virtual_Com_Port>true</Virtual_Com_Port>
        <D2XX_Direct>false</D2XX_Direct>
      </Driver>
    </Port_B>
  </Hardware_Specific>
</FT_EEPROM>

-- 
Xiaofan

--
libftdi - see http://www.intra2net.com/en/developer/libftdi for details.
To unsubscribe send a mail to libftdi+unsubscribe@xxxxxxxxxxxxxxxxxxxxxxx