// Addr 00: Channel A setting
eeprom->channel_a_type = buf[0x00] & 0x7;
+ eeprom->high_current = buf[0x00] & HIGH_CURRENT_DRIVE_R;
eeprom->channel_a_driver = buf[0x00] & DRIVER_VCP;
eeprom->high_current_a = buf[0x00] & HIGH_CURRENT_DRIVE;
eeprom->out_is_isochronous = buf[0x0A]&0x02;
eeprom->suspend_pull_downs = buf[0x0A]&0x04;
eeprom->use_serial = buf[0x0A] & USE_SERIAL_NUM;
- if((buf[0x0A]&0x10) != 0x10)
+ if(buf[0x0A]&0x10)
fprintf(stderr,
"EEPROM byte[0x0a] Bit 4 unexpected set. If this happened with the EEPROM\n"
"programmed by FTDI tools, please report to libftdi@developer.intra2net.com\n");
/* Special function of FT232R devices (and possibly others as well) */
/** CBUS pin function. See CBUS_xxx defines. */
int cbus_function[5];
- /** Select hight current drive. */
+ /** Select hight current drive on R devices. */
+ int high_current;
+ /** Select hight current drive on A channel (2232C */
int high_current_a;
- /** Select hight current drive on B port (2232C). */
+ /** Select hight current drive on B channel (2232C). */
int high_current_b;
/** Select inversion of data lines (bitmask). */
int invert;
/** High current drive. */
#define HIGH_CURRENT_DRIVE 0x10
+#define HIGH_CURRENT_DRIVE_R 0x04
/**
\brief Progress Info for streaming read