Here is a short tutorial on how to build libftdi git under
Ubuntu 12.10, But it is similar on other Linux distros.
1) Install the build tools
sudo apt-get install build-essential
sudo apt-get install git-core
sudo apt-get install cmake
sudo apt-get install doxygen (for building documentations)
2) Install dependencies
sudo apt-get install libusb-1.0-devel
(if the system comes with older version like 1.0.8 or
earlier, it is recommended you build libusbx-1.0.14 or later).
sudo apt-get install libconfuse-dev (for ftdi-eeprom)
sudo apt-get install swig python-dev (for python bindings)
sudo apt-get install libboost-all-dev (for C++ binding and unit test)
3) Clone the git repository
mkdir libftdi
cd libftdi
git clone git://developer.intra2net.com/libftdi
If you are building the release tar ball, just extract the source
tar ball.
4) Build the git source and install
cd libftdi
mkdir build
cd build
cmake ..
nano CMakeCache.txt (if you want to change some build optiosn)
cmake ..
make
sudo make install
5) carry out some tests
cd examples
mcuee@Ubuntu1210VM:~/Desktop/build/libftdi/libftdi/build/examples$
./find_all_pp -v 0x0403 -p 0x6001
Found devices ( VID: 0x403, PID: 0x6001 )
------------------------------------------------
FTDI (0x8730800): ftdi, usb serial converter, ftDEH51S (Open OK)
FTDI (0x8730918): FTDI, FT232R USB UART, A8007Ub5 (Open OK)
mcuee@Ubuntu1210VM:~/Desktop/build/libftdi/libftdi/build/examples$ ./eeprom
2 FTDI devices found: Only Readout on EEPROM done. Use
VID/PID/desc/serial to select device
Decoded values of device 1:
Chip type 1 ftdi_eeprom_size: 128
0x000: 00 00 03 04 01 60 00 04 a0 16 08 00 10 01 94 0a .....`.. ........
0x010: 9e 2a c8 12 0a 03 66 00 74 00 64 00 69 00 2a 03 .*....f. t.d.i.*.
0x020: 75 00 73 00 62 00 20 00 73 00 65 00 72 00 69 00 u.s.b. . s.e.r.i.
0x030: 61 00 6c 00 20 00 63 00 6f 00 6e 00 76 00 65 00 a.l. .c. o.n.v.e.
0x040: 72 00 74 00 65 00 72 00 12 03 66 00 74 00 44 00 r.t.e.r. ..f.t.D.
0x050: 45 00 48 00 35 00 31 00 53 00 02 03 00 00 00 00 E.H.5.1. S.......
0x060: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ........ ........
0x070: 00 00 00 00 00 00 00 00 00 00 00 00 01 00 16 02 ........ ........
VID: 0x0403
PID: 0x6001
Release: 0x0400
Bus Powered: 44 mA USB Remote Wake Up
Manufacturer: ftdi
Product: usb serial converter
Serial: ftDEH51S
Checksum : 0216
Enable Remote Wake Up
PNP: 1
Decoded values of device 2:
Chip type 3 ftdi_eeprom_size: 128
0x000: 00 40 03 04 01 60 00 00 a0 2d 08 00 00 00 98 0a .@...`.. .-......
0x010: a2 20 c2 12 23 10 05 00 0a 03 46 00 54 00 44 00 . ..#... ..F.T.D.
0x020: 49 00 20 03 46 00 54 00 32 00 33 00 32 00 52 00 I. .F.T. 2.3.2.R.
0x030: 20 00 55 00 53 00 42 00 20 00 55 00 41 00 52 00 .U.S.B. .U.A.R.
0x040: 54 00 12 03 41 00 38 00 30 00 30 00 37 00 55 00 T...A.8. 0.0.7.U.
0x050: 62 00 35 00 c9 bf 1c 80 00 00 00 00 00 00 00 00 b.5..... ........
0x060: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ........ ........
0x070: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0f 23 ........ .......#
0x080: 2c 04 d3 fb 00 00 c9 bf 1c 80 42 00 00 00 00 00 ,....... ..B.....
0x090: 00 00 00 00 00 00 00 00 38 41 32 52 4a 33 47 4f ........ 8A2RJ3GO
VID: 0x0403
PID: 0x6001
Release: 0x0000
Bus Powered: 90 mA USB Remote Wake Up
Manufacturer: FTDI
Product: FT232R USB UART
Serial: A8007Ub5
Checksum : 230f
Internal EEPROM
Enable Remote Wake Up
PNP: 1
Channel A has Mode UART VCP
C0 Function: TXLED
C1 Function: RXLED
C2 Function: TXDEN
C3 Function: PWREN
C4 Function: SLEEP
--
Xiaofan
--
libftdi - see http://www.intra2net.com/en/developer/libftdi for details.
To unsubscribe send a mail to libftdi+unsubscribe@xxxxxxxxxxxxxxxxxxxxxxx
|
