Subject: Re: Trouble with TTL232R.
I am using this cable with 2 megabit/sec.
It is working out of the box in 0.18.
I am using it normally as a Serial port (RxD, TxD lines only).
VDR User írta:
> Hi. I'm trying to get a TTL232R 5v cable working with lirc and so far
> have been unable to do this and am trying to figure out if the problem
> is in libftdi or lirc. Is this cable known to be working in libftdi?
> I've connected a TSOP1738 IR receiver to the TTL232R cable. Using
> lirc's irrecord, my remote control is not correctly detected and the
> "raw mode" conf it creates does not work with 99%+ of the keypresses I
> try. Since the box this is on is an Nvidia ION-based htpc (32bit), I
> can't use a serial IR (which works fine with the same remote control).
> My lirc source is cvs from today and the only libftdi available to me
> is from debian linux testing:
> ii libftdi-dev 0.18-1
> Development files for libftdi
> ii libftdi1 0.18-1
> Library to control and program the FTDI USB controller
> I downloaded the git source of libftdi thinking there may be some
> fixes since 0.18-1 in it but was unable to figure out how to compile
> it in debian linux. (I'm not a coder btw). If anyone can help me at
> least determine if the problem is libftdi or lirc I would greatly
> appreciate it since that would give me a place to start. The device
> is detected as follows:
> [ 1.371890] usb 3-2: New USB device found, idVendor=0403, idProduct=6001
> [ 1.371898] usb 3-2: New USB device strings: Mfr=1, Product=2,
> [ 1.371904] usb 3-2: Product: TTL232R
> [ 1.371909] usb 3-2: Manufacturer: FTDI
> [ 1.371914] usb 3-2: SerialNumber: FTF0GFZ7
> I'm not sure what other infos may be useful. Thanks for any/all help!
> Best regards,
> libftdi - see http://www.intra2net.com/en/developer/libftdi for details.
> To unsubscribe send a mail to libftdi+unsubscribe@xxxxxxxxxxxxxxxxxxxxxxx
libftdi - see http://www.intra2net.com/en/developer/libftdi for details.
To unsubscribe send a mail to libftdi+unsubscribe@xxxxxxxxxxxxxxxxxxxxxxx