From: Yegor Yefremov <yegorslists@xxxxxxxxxxxxxx>
---
src/ftdi.c | 18 +++++++++---------
1 file changed, 9 insertions(+), 9 deletions(-)
diff --git a/src/ftdi.c b/src/ftdi.c
index 0a7fb27..3a51b26 100644
--- a/src/ftdi.c
+++ b/src/ftdi.c
@@ -83,7 +83,7 @@ static void ftdi_usb_close_internal (struct ftdi_context
*ftdi)
\retval 0: all fine
\retval -1: couldn't allocate read buffer
- \retval -2: couldn't allocate struct buffer
+ \retval -2: couldn't allocate struct buffer
\retval -3: libusb_init() failed
\remark This should be called before all functions
@@ -112,7 +112,7 @@ int ftdi_init(struct ftdi_context *ftdi)
ftdi_error_return(-3, "libusb_init() failed");
ftdi_set_interface(ftdi, INTERFACE_ANY);
- ftdi->bitbang_mode = 1; /* when bitbang is enabled this holds the number
of the mode */
+ ftdi->bitbang_mode = 1; /* when bitbang is enabled this holds the number
of the mode */
eeprom = (struct ftdi_eeprom *)malloc(sizeof(struct ftdi_eeprom));
if (eeprom == 0)
@@ -298,7 +298,7 @@ struct ftdi_version_info ftdi_get_library_version(void)
/**
Finds all ftdi devices with given VID:PID on the usb bus. Creates a new
ftdi_device_list which needs to be deallocated by ftdi_list_free() after
- use. With VID:PID 0:0, search for the default devices
+ use. With VID:PID 0:0, search for the default devices
(0x403:0x6001, 0x403:0x6010, 0x403:0x6011, 0x403:0x6014, 0x403:0x6015)
\param ftdi pointer to ftdi_context
@@ -639,7 +639,7 @@ int ftdi_usb_open_dev(struct ftdi_context *ftdi,
libusb_device *dev)
ftdi_error_return(-12, "libusb_get_configuration () failed");
// set configuration (needed especially for windows)
// tolerate EBUSY: one device with one configuration, but two interfaces
- // and libftdi sessions to both interfaces (e.g. FT2232)
+ // and libftdi sessions to both interfaces (e.g. FT2232)
if (desc.bNumConfigurations > 0 && cfg != cfg0)
{
if (libusb_set_configuration(ftdi->usb_dev, cfg0) < 0)
@@ -1316,7 +1316,7 @@ static int ftdi_to_clkbits_AM(int baudrate, unsigned long
*encoded_divisor)
return best_baud;
}
-/* ftdi_to_clkbits Convert a requested baudrate for a given system clock and
predivisor
+/* ftdi_to_clkbits Convert a requested baudrate for a given system clock and
predivisor
to encoded divisor and the achievable baudrate
Function is only used internally
\internal
@@ -3072,7 +3072,7 @@ int ftdi_eeprom_build(struct ftdi_context *ftdi)
i = 0xa0;
break;
}
- /* Wrap around 0x80 for 128 byte EEPROMS (Internale and 93x46) */
+ /* Wrap around 0x80 for 128 byte EEPROMS (Internal and 93x46) */
eeprom_size_mask = eeprom->size -1;
free_end = i & eeprom_size_mask;
@@ -3136,7 +3136,7 @@ int ftdi_eeprom_build(struct ftdi_context *ftdi)
}
/* Bytes and Bits specific to (some) types
- Write linear, as this allows easier fixing*/
+ Write linear, as this allows easier fixing */
switch (ftdi->type)
{
case TYPE_AM:
@@ -3208,7 +3208,7 @@ int ftdi_eeprom_build(struct ftdi_context *ftdi)
if (eeprom->external_oscillator)
output[0x00] |= 0x02;
- output[0x01] = 0x40; /* Hard coded Endpoint Size*/
+ output[0x01] = 0x40; /* Hard coded Endpoint Size */
if (eeprom->suspend_pull_downs)
output[0x0A] |= 0x4;
@@ -3440,7 +3440,7 @@ int ftdi_eeprom_build(struct ftdi_context *ftdi)
case TYPE_230X:
output[0x00] = 0x80; /* Actually, leave the default value */
/*FIXME: Make DBUS & CBUS Control configurable*/
- output[0x0c] = 0; /* DBUS drive 4mA, CBUS drive 4 mA like
factory default */
+ output[0x0c] = 0; /* DBUS drive 4mA, CBUS drive 4mA like
factory default */
for (j = 0; j <= 6; j++)
{
output[0x1a + j] = eeprom->cbus_function[j];
--
2.34.1
--
libftdi - see http://www.intra2net.com/en/developer/libftdi for details.
To unsubscribe send a mail to libftdi+unsubscribe@xxxxxxxxxxxxxxxxxxxxxxx
|