On 2012-06-21 18:39:10, Thomas Heller wrote:
Am 21.06.2012 17:08, schrieb Thomas Jarosch:
On Thursday, 21. June 2012 16:53:09 Kofi Jedamzik wrote:
after programming the eeprom of an FT245RL with ftdi_eeprom v0.17
(git)
the FTDI chip is not working and a check with FT Prog shows the
Chip type
has changed to FT232R
how can i make it working?
Please use ftdi_eeprom from git HEAD.
Eeprom support is incomplete in libftdi 0.x.
Huh - is the *chip type* stored in the eeprom?
Unfortunately this is true for the FT245R vs. FT232R;
the FT245R has bit 0 set in the first byte of the eeprom whereas the
bit is cleared in the FT232R (whether the same holds true for the FT245
vs. FT232 without 'R' I cannot tell).
Even ftdi_eeprom from git HEAD is unable to cope with this :-(
The attached quick hack turns the problem upside down; with the patch
applied, ftdi_eeprom handles the FT245R correctly at the cost of
turning an FT232R into an FT245R, so it may solve Kofi's problem
short-term but is certainly not suitable for inclusion. Caveat emptor.
Cheers
Anders
--
libftdi - see http://www.intra2net.com/en/developer/libftdi for details.
To unsubscribe send a mail to libftdi+unsubscribe@xxxxxxxxxxxxxxxxxxxxxxx
0001-TYPE_R-means-FT245R-for-us.patch
Description: Text Data
|