The branch, master has been updated
via 7a172cafefbfccdc0f93916947bac74c758ae1d6 (commit)
from 0fc2170ca72171271792ce9c42d7c55ede1fa4d4 (commit)
- Log -----------------------------------------------------------------
commit 7a172cafefbfccdc0f93916947bac74c758ae1d6
Author: Uwe Bonnes <bon@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>
Date: Fri Jun 17 21:47:50 2011 +0200
Hardware mode definitions for EEPROM programming must follow new definition
Some more FT232H related defines
-----------------------------------------------------------------------
Summary of changes:
src/ftdi.h | 6 ++++--
1 files changed, 4 insertions(+), 2 deletions(-)
diff --git a/src/ftdi.h b/src/ftdi.h
index 15518b5..c0a3d3d 100644
--- a/src/ftdi.h
+++ b/src/ftdi.h
@@ -45,6 +45,7 @@ enum ftdi_mpsse_mode
BITMODE_OPTO = 0x10, /**< Fast Opto-Isolated Serial Interface Mode,
available on 2232x chips */
BITMODE_CBUS = 0x20, /**< Bitbang on CBUS pins of R-type chips,
configure in EEPROM before */
BITMODE_SYNCFF = 0x40, /**< Single Channel Synchronous FIFO mode,
available on 2232H chips */
+ BITMODE_FT1284 = 0x80, /**< FT1284 mode, available on 232H chips */
};
/** Port interface for chips with multiple interfaces */
@@ -413,7 +414,7 @@ struct ftdi_device_list
struct libusb_device *dev;
};
#define FT1284_CLK_IDLE_STATE 0x01
-#define FT1284_DATA_LSB 0x02
+#define FT1284_DATA_LSB 0x02 /* DS_FT232H 1.3 amd ftd2xx.h 1.0.4
disagree here*/
#define FT1284_FLOW_CONTROL 0x04
#define POWER_SAVE_DISABLE_H 0x80
@@ -449,7 +450,8 @@ enum ftdi_cbush_func {/* FIXME: Recheck value, especially
the last */
#define CHANNEL_IS_UART 0x0
#define CHANNEL_IS_245 0x1
#define CHANNEL_IS_CPU 0x2
-#define CHANNEL_IS_OPTO 0x4
+#define CHANNEL_IS_OPTO 0x3
+#define CHANNEL_IS_FT1284 0x4
#define DRIVE_4MA 0
#define DRIVE_8MA 1
hooks/post-receive
--
port libftdi to libusb-1.0
--
libftdi-git - see http://www.intra2net.com/en/developer/libftdi for details.
To unsubscribe send a mail to libftdi-git+unsubscribe@xxxxxxxxxxxxxxxxxxxxxxx
|
