X-Git-Url: http://developer.intra2net.com/git/?p=libftdi;a=blobdiff_plain;f=src%2Fftdi.c;h=573080a92f80ef5ae218312b6f3c9a291add8d03;hp=782bd0f2d567c1a6b9351f775f15ef121a743b72;hb=f838a4e3b0466abc34823750e9eef24d785c8232;hpb=8a987aa2e1335d9ef3ebbdf496a7b071317b40a3 diff --git a/src/ftdi.c b/src/ftdi.c index 782bd0f..573080a 100644 --- a/src/ftdi.c +++ b/src/ftdi.c @@ -2,7 +2,7 @@ ftdi.c - description ------------------- begin : Fri Apr 4 2003 - copyright : (C) 2003-2011 by Intra2net AG and the libftdi developers + copyright : (C) 2003-2014 by Intra2net AG and the libftdi developers email : opensource@intra2net.com ***************************************************************************/ @@ -34,10 +34,15 @@ #include #include +#include "ftdi_i.h" #include "ftdi.h" +#include "ftdi_version_i.h" #define ftdi_error_return(code, str) do { \ - ftdi->error_str = str; \ + if ( ftdi ) \ + ftdi->error_str = str; \ + else \ + fprintf(stderr, str); \ return code; \ } while(0); @@ -63,6 +68,8 @@ static void ftdi_usb_close_internal (struct ftdi_context *ftdi) { libusb_close (ftdi->usb_dev); ftdi->usb_dev = NULL; + if(ftdi->eeprom) + ftdi->eeprom->initialized_for_connected_device = 0; } } @@ -74,6 +81,7 @@ static void ftdi_usb_close_internal (struct ftdi_context *ftdi) \retval 0: all fine \retval -1: couldn't allocate read buffer \retval -2: couldn't allocate struct buffer + \retval -3: libusb_init() failed \remark This should be called before all functions */ @@ -94,12 +102,15 @@ int ftdi_init(struct ftdi_context *ftdi) ftdi->readbuffer_remaining = 0; ftdi->writebuffer_chunksize = 4096; ftdi->max_packet_size = 0; + ftdi->error_str = NULL; + ftdi->module_detach_mode = AUTO_DETACH_SIO_MODULE; + + if (libusb_init(&ftdi->usb_ctx) < 0) + ftdi_error_return(-3, "libusb_init() failed"); ftdi_set_interface(ftdi, INTERFACE_ANY); ftdi->bitbang_mode = 1; /* when bitbang is enabled this holds the number of the mode */ - ftdi->error_str = NULL; - if (eeprom == 0) ftdi_error_return(-2, "Can't malloc struct ftdi_eeprom"); memset(eeprom, 0, sizeof(struct ftdi_eeprom)); @@ -141,12 +152,23 @@ struct ftdi_context *ftdi_new(void) \retval 0: all fine \retval -1: unknown interface \retval -2: USB device unavailable + \retval -3: Device already open, interface can't be set in that state */ int ftdi_set_interface(struct ftdi_context *ftdi, enum ftdi_interface interface) { if (ftdi == NULL) ftdi_error_return(-2, "USB device unavailable"); + if (ftdi->usb_dev != NULL) + { + int check_interface = interface; + if (check_interface == INTERFACE_ANY) + check_interface = INTERFACE_A; + + if (ftdi->index != check_interface) + ftdi_error_return(-3, "Interface can not be changed on an already open device"); + } + switch (interface) { case INTERFACE_ANY: @@ -218,7 +240,12 @@ void ftdi_deinit(struct ftdi_context *ftdi) free(ftdi->eeprom); ftdi->eeprom = NULL; } - libusb_exit(ftdi->usb_ctx); + + if (ftdi->usb_ctx) + { + libusb_exit(ftdi->usb_ctx); + ftdi->usb_ctx = NULL; + } } /** @@ -246,10 +273,29 @@ void ftdi_set_usbdev (struct ftdi_context *ftdi, libusb_device_handle *usb) ftdi->usb_dev = usb; } +/** + * @brief Get libftdi library version + * + * @return ftdi_version_info Library version information + **/ +struct ftdi_version_info ftdi_get_library_version(void) +{ + struct ftdi_version_info ver; + + ver.major = FTDI_MAJOR_VERSION; + ver.minor = FTDI_MINOR_VERSION; + ver.micro = FTDI_MICRO_VERSION; + ver.version_str = FTDI_VERSION_STRING; + ver.snapshot_str = FTDI_SNAPSHOT_VERSION; + + return ver; +} /** - Finds all ftdi devices on the usb bus. Creates a new ftdi_device_list which - needs to be deallocated by ftdi_list_free() after use. + Finds all ftdi devices with given VID:PID on the usb bus. Creates a new + ftdi_device_list which needs to be deallocated by ftdi_list_free() after + use. With VID:PID 0:0, search for the default devices + (0x403:0x6001, 0x403:0x6010, 0x403:0x6011, 0x403:0x6014, 0x403:0x6015) \param ftdi pointer to ftdi_context \param devlist Pointer where to store list of found devices @@ -258,7 +304,6 @@ void ftdi_set_usbdev (struct ftdi_context *ftdi, libusb_device_handle *usb) \retval >0: number of devices found \retval -3: out of memory - \retval -4: libusb_init() failed \retval -5: libusb_get_device_list() failed \retval -6: libusb_get_device_descriptor() failed */ @@ -270,9 +315,6 @@ int ftdi_usb_find_all(struct ftdi_context *ftdi, struct ftdi_device_list **devli int count = 0; int i = 0; - if (libusb_init(&ftdi->usb_ctx) < 0) - ftdi_error_return(-4, "libusb_init() failed"); - if (libusb_get_device_list(ftdi->usb_ctx, &devs) < 0) ftdi_error_return(-5, "libusb_get_device_list() failed"); @@ -284,22 +326,27 @@ int ftdi_usb_find_all(struct ftdi_context *ftdi, struct ftdi_device_list **devli struct libusb_device_descriptor desc; if (libusb_get_device_descriptor(dev, &desc) < 0) - ftdi_error_return(-6, "libusb_get_device_descriptor() failed"); - - if (desc.idVendor == vendor && desc.idProduct == product) + ftdi_error_return_free_device_list(-6, "libusb_get_device_descriptor() failed", devs); + + if (((vendor || product) && + desc.idVendor == vendor && desc.idProduct == product) || + (!(vendor || product) && + (desc.idVendor == 0x403) && (desc.idProduct == 0x6001 || desc.idProduct == 0x6010 + || desc.idProduct == 0x6011 || desc.idProduct == 0x6014 + || desc.idProduct == 0x6015))) { *curdev = (struct ftdi_device_list*)malloc(sizeof(struct ftdi_device_list)); if (!*curdev) - ftdi_error_return(-3, "out of memory"); + ftdi_error_return_free_device_list(-3, "out of memory", devs); (*curdev)->next = NULL; (*curdev)->dev = dev; - + libusb_ref_device(dev); curdev = &(*curdev)->next; count++; } } - + libusb_free_device_list(devs,1); return count; } @@ -315,6 +362,7 @@ void ftdi_list_free(struct ftdi_device_list **devlist) for (curdev = *devlist; curdev != NULL;) { next = curdev->next; + libusb_unref_device(curdev->dev); free(curdev); curdev = next; } @@ -366,8 +414,8 @@ int ftdi_usb_get_strings(struct ftdi_context * ftdi, struct libusb_device * dev, if ((ftdi==NULL) || (dev==NULL)) return -1; - if (libusb_open(dev, &ftdi->usb_dev) < 0) - ftdi_error_return(-4, "libusb_open() failed"); + if (ftdi->usb_dev == NULL && libusb_open(dev, &ftdi->usb_dev) < 0) + ftdi_error_return(-4, "libusb_open() failed"); if (libusb_get_device_descriptor(dev, &desc) < 0) ftdi_error_return(-11, "libusb_get_device_descriptor() failed"); @@ -423,7 +471,7 @@ static unsigned int _ftdi_determine_max_packet_size(struct ftdi_context *ftdi, l // Determine maximum packet size. Init with default value. // New hi-speed devices from FTDI use a packet size of 512 bytes // but could be connected to a normal speed USB hub -> 64 bytes packet size. - if (ftdi->type == TYPE_2232H || ftdi->type == TYPE_4232H) + if (ftdi->type == TYPE_2232H || ftdi->type == TYPE_4232H || ftdi->type == TYPE_232H) packet_size = 512; else packet_size = 64; @@ -469,7 +517,7 @@ static unsigned int _ftdi_determine_max_packet_size(struct ftdi_context *ftdi, l \retval -8: ftdi context invalid \retval -9: libusb_get_device_descriptor() failed \retval -10: libusb_get_config_descriptor() failed - \retval -11: libusb_etach_kernel_driver() failed + \retval -11: libusb_detach_kernel_driver() failed \retval -12: libusb_get_configuration() failed */ int ftdi_usb_open_dev(struct ftdi_context *ftdi, libusb_device *dev) @@ -498,8 +546,11 @@ int ftdi_usb_open_dev(struct ftdi_context *ftdi, libusb_device *dev) // if usb_set_configuration() or usb_claim_interface() fails as the // detach operation might be denied and everything still works fine. // Likely scenario is a static ftdi_sio kernel module. - if (libusb_detach_kernel_driver(ftdi->usb_dev, ftdi->interface) !=0) - detach_errno = errno; + if (ftdi->module_detach_mode == AUTO_DETACH_SIO_MODULE) + { + if (libusb_detach_kernel_driver(ftdi->usb_dev, ftdi->interface) !=0) + detach_errno = errno; + } if (libusb_get_configuration (ftdi->usb_dev, &cfg) < 0) ftdi_error_return(-12, "libusb_get_configuration () failed"); @@ -556,6 +607,10 @@ int ftdi_usb_open_dev(struct ftdi_context *ftdi, libusb_device *dev) ftdi->type = TYPE_2232H; else if (desc.bcdDevice == 0x800) ftdi->type = TYPE_4232H; + else if (desc.bcdDevice == 0x900) + ftdi->type = TYPE_232H; + else if (desc.bcdDevice == 0x1000) + ftdi->type = TYPE_230X; // Determine maximum packet size ftdi->max_packet_size = _ftdi_determine_max_packet_size(ftdi, dev); @@ -601,7 +656,6 @@ int ftdi_usb_open(struct ftdi_context *ftdi, int vendor, int product) \retval -7: set baudrate failed \retval -8: get product description failed \retval -9: get serial number failed - \retval -11: libusb_init() failed \retval -12: libusb_get_device_list() failed \retval -13: libusb_get_device_descriptor() failed */ @@ -643,9 +697,6 @@ int ftdi_usb_open_desc_index(struct ftdi_context *ftdi, int vendor, int product, char string[256]; int i = 0; - if (libusb_init(&ftdi->usb_ctx) < 0) - ftdi_error_return(-11, "libusb_init() failed"); - if (ftdi == NULL) ftdi_error_return(-11, "ftdi context invalid"); @@ -669,12 +720,12 @@ int ftdi_usb_open_desc_index(struct ftdi_context *ftdi, int vendor, int product, { if (libusb_get_string_descriptor_ascii(ftdi->usb_dev, desc.iProduct, (unsigned char *)string, sizeof(string)) < 0) { - libusb_close (ftdi->usb_dev); + ftdi_usb_close_internal (ftdi); ftdi_error_return_free_device_list(-8, "unable to fetch product description", devs); } if (strncmp(string, description, sizeof(string)) != 0) { - libusb_close (ftdi->usb_dev); + ftdi_usb_close_internal (ftdi); continue; } } @@ -724,7 +775,6 @@ int ftdi_usb_open_desc_index(struct ftdi_context *ftdi, int vendor, int product, \note The description format may be extended in later versions. \retval 0: all fine - \retval -1: libusb_init() failed \retval -2: libusb_get_device_list() failed \retval -3: usb device not found \retval -4: unable to open device @@ -752,9 +802,6 @@ int ftdi_usb_open_string(struct ftdi_context *ftdi, const char* description) unsigned int bus_number, device_address; int i = 0; - if (libusb_init (&ftdi->usb_ctx) < 0) - ftdi_error_return(-1, "libusb_init() failed"); - if (libusb_get_device_list(ftdi->usb_ctx, &devs) < 0) ftdi_error_return(-2, "libusb_get_device_list() failed"); @@ -953,34 +1000,30 @@ int ftdi_usb_close(struct ftdi_context *ftdi) return rtn; } -/** - ftdi_convert_baudrate returns nearest supported baud rate to that requested. +/* ftdi_to_clkbits_AM For the AM device, convert a requested baudrate + to encoded divisor and the achievable baudrate Function is only used internally \internal + + See AN120 + clk/1 -> 0 + clk/1.5 -> 1 + clk/2 -> 2 + From /2, 0.125/ 0.25 and 0.5 steps may be taken + The fractional part has frac_code encoding */ -static int ftdi_convert_baudrate(int baudrate, struct ftdi_context *ftdi, - unsigned short *value, unsigned short *index) +static int ftdi_to_clkbits_AM(int baudrate, unsigned long *encoded_divisor) + { + static const char frac_code[8] = {0, 3, 2, 4, 1, 5, 6, 7}; static const char am_adjust_up[8] = {0, 0, 0, 1, 0, 3, 2, 1}; static const char am_adjust_dn[8] = {0, 0, 0, 1, 0, 1, 2, 3}; - static const char frac_code[8] = {0, 3, 2, 4, 1, 5, 6, 7}; int divisor, best_divisor, best_baud, best_baud_diff; - unsigned long encoded_divisor; int i; - - if (baudrate <= 0) - { - // Return error - return -1; - } - divisor = 24000000 / baudrate; - if (ftdi->type == TYPE_AM) - { - // Round down to supported fraction (AM only) - divisor -= am_adjust_dn[divisor & 7]; - } + // Round down to supported fraction (AM only) + divisor -= am_adjust_dn[divisor & 7]; // Try this divisor and the one above it (because division rounds down) best_divisor = 0; @@ -998,11 +1041,6 @@ static int ftdi_convert_baudrate(int baudrate, struct ftdi_context *ftdi, // Round up to minimum supported divisor try_divisor = 8; } - else if (ftdi->type != TYPE_AM && try_divisor < 12) - { - // BM doesn't support divisors 9 through 11 inclusive - try_divisor = 12; - } else if (divisor < 16) { // AM doesn't support divisors 9 through 15 inclusive @@ -1010,23 +1048,12 @@ static int ftdi_convert_baudrate(int baudrate, struct ftdi_context *ftdi, } else { - if (ftdi->type == TYPE_AM) + // Round up to supported fraction (AM only) + try_divisor += am_adjust_up[try_divisor & 7]; + if (try_divisor > 0x1FFF8) { - // Round up to supported fraction (AM only) - try_divisor += am_adjust_up[try_divisor & 7]; - if (try_divisor > 0x1FFF8) - { - // Round down to maximum supported divisor value (for AM) - try_divisor = 0x1FFF8; - } - } - else - { - if (try_divisor > 0x1FFFF) - { - // Round down to maximum supported divisor value (for BM) - try_divisor = 0x1FFFF; - } + // Round down to maximum supported divisor value (for AM) + try_divisor = 0x1FFF8; } } // Get estimated baud rate (to nearest integer) @@ -1054,19 +1081,127 @@ static int ftdi_convert_baudrate(int baudrate, struct ftdi_context *ftdi, } } // Encode the best divisor value - encoded_divisor = (best_divisor >> 3) | (frac_code[best_divisor & 7] << 14); + *encoded_divisor = (best_divisor >> 3) | (frac_code[best_divisor & 7] << 14); // Deal with special cases for encoded value - if (encoded_divisor == 1) + if (*encoded_divisor == 1) + { + *encoded_divisor = 0; // 3000000 baud + } + else if (*encoded_divisor == 0x4001) + { + *encoded_divisor = 1; // 2000000 baud (BM only) + } + return best_baud; +} + +/* ftdi_to_clkbits Convert a requested baudrate for a given system clock and predivisor + to encoded divisor and the achievable baudrate + Function is only used internally + \internal + + See AN120 + clk/1 -> 0 + clk/1.5 -> 1 + clk/2 -> 2 + From /2, 0.125 steps may be taken. + The fractional part has frac_code encoding + + value[13:0] of value is the divisor + index[9] mean 12 MHz Base(120 MHz/10) rate versus 3 MHz (48 MHz/16) else + + H Type have all features above with + {index[8],value[15:14]} is the encoded subdivisor + + FT232R, FT2232 and FT232BM have no option for 12 MHz and with + {index[0],value[15:14]} is the encoded subdivisor + + AM Type chips have only four fractional subdivisors at value[15:14] + for subdivisors 0, 0.5, 0.25, 0.125 +*/ +static int ftdi_to_clkbits(int baudrate, unsigned int clk, int clk_div, unsigned long *encoded_divisor) +{ + static const char frac_code[8] = {0, 3, 2, 4, 1, 5, 6, 7}; + int best_baud = 0; + int divisor, best_divisor; + if (baudrate >= clk/clk_div) + { + *encoded_divisor = 0; + best_baud = clk/clk_div; + } + else if (baudrate >= clk/(clk_div + clk_div/2)) { - encoded_divisor = 0; // 3000000 baud + *encoded_divisor = 1; + best_baud = clk/(clk_div + clk_div/2); } - else if (encoded_divisor == 0x4001) + else if (baudrate >= clk/(2*clk_div)) { - encoded_divisor = 1; // 2000000 baud (BM only) + *encoded_divisor = 2; + best_baud = clk/(2*clk_div); + } + else + { + /* We divide by 16 to have 3 fractional bits and one bit for rounding */ + divisor = clk*16/clk_div / baudrate; + if (divisor & 1) /* Decide if to round up or down*/ + best_divisor = divisor /2 +1; + else + best_divisor = divisor/2; + if(best_divisor > 0x20000) + best_divisor = 0x1ffff; + best_baud = clk*16/clk_div/best_divisor; + if (best_baud & 1) /* Decide if to round up or down*/ + best_baud = best_baud /2 +1; + else + best_baud = best_baud /2; + *encoded_divisor = (best_divisor >> 3) | (frac_code[best_divisor & 0x7] << 14); + } + return best_baud; +} +/** + ftdi_convert_baudrate returns nearest supported baud rate to that requested. + Function is only used internally + \internal +*/ +static int ftdi_convert_baudrate(int baudrate, struct ftdi_context *ftdi, + unsigned short *value, unsigned short *index) +{ + int best_baud; + unsigned long encoded_divisor; + + if (baudrate <= 0) + { + // Return error + return -1; + } + +#define H_CLK 120000000 +#define C_CLK 48000000 + if ((ftdi->type == TYPE_2232H) || (ftdi->type == TYPE_4232H) || (ftdi->type == TYPE_232H)) + { + if(baudrate*10 > H_CLK /0x3fff) + { + /* On H Devices, use 12 000 000 Baudrate when possible + We have a 14 bit divisor, a 1 bit divisor switch (10 or 16) + three fractional bits and a 120 MHz clock + Assume AN_120 "Sub-integer divisors between 0 and 2 are not allowed" holds for + DIV/10 CLK too, so /1, /1.5 and /2 can be handled the same*/ + best_baud = ftdi_to_clkbits(baudrate, H_CLK, 10, &encoded_divisor); + encoded_divisor |= 0x20000; /* switch on CLK/10*/ + } + else + best_baud = ftdi_to_clkbits(baudrate, C_CLK, 16, &encoded_divisor); + } + else if ((ftdi->type == TYPE_BM) || (ftdi->type == TYPE_2232C) || (ftdi->type == TYPE_R )) + { + best_baud = ftdi_to_clkbits(baudrate, C_CLK, 16, &encoded_divisor); + } + else + { + best_baud = ftdi_to_clkbits_AM(baudrate, &encoded_divisor); } // Split into "value" and "index" values *value = (unsigned short)(encoded_divisor & 0xFFFF); - if (ftdi->type == TYPE_2232C || ftdi->type == TYPE_2232H || ftdi->type == TYPE_4232H) + if (ftdi->type == TYPE_2232H || ftdi->type == TYPE_4232H || ftdi->type == TYPE_232H) { *index = (unsigned short)(encoded_divisor >> 8); *index &= 0xFF00; @@ -1080,6 +1215,16 @@ static int ftdi_convert_baudrate(int baudrate, struct ftdi_context *ftdi, } /** + * @brief Wrapper function to export ftdi_convert_baudrate() to the unit test + * Do not use, it's only for the unit test framework + **/ +int convert_baudrate_UT_export(int baudrate, struct ftdi_context *ftdi, + unsigned short *value, unsigned short *index) +{ + return ftdi_convert_baudrate(baudrate, ftdi, value, index); +} + +/** Sets the chip baud rate \param ftdi pointer to ftdi_context @@ -1225,7 +1370,7 @@ int ftdi_set_line_property2(struct ftdi_context *ftdi, enum ftdi_bits_type bits, \retval <0: error code from usb_bulk_write() \retval >0: number of bytes written */ -int ftdi_write_data(struct ftdi_context *ftdi, unsigned char *buf, int size) +int ftdi_write_data(struct ftdi_context *ftdi, const unsigned char *buf, int size) { int offset = 0; int actual_length; @@ -1240,7 +1385,7 @@ int ftdi_write_data(struct ftdi_context *ftdi, unsigned char *buf, int size) if (offset+write_size > size) write_size = size-offset; - if (libusb_bulk_transfer(ftdi->usb_dev, ftdi->in_ep, buf+offset, write_size, &actual_length, ftdi->usb_write_timeout) < 0) + if (libusb_bulk_transfer(ftdi->usb_dev, ftdi->in_ep, (unsigned char *)buf+offset, write_size, &actual_length, ftdi->usb_write_timeout) < 0) ftdi_error_return(-1, "usb bulk write failed"); offset += actual_length; @@ -1249,7 +1394,7 @@ int ftdi_write_data(struct ftdi_context *ftdi, unsigned char *buf, int size) return offset; } -static void ftdi_read_data_cb(struct libusb_transfer *transfer) +static void LIBUSB_CALL ftdi_read_data_cb(struct libusb_transfer *transfer) { struct ftdi_transfer_control *tc = (struct ftdi_transfer_control *) transfer->user_data; struct ftdi_context *ftdi = tc->ftdi; @@ -1325,13 +1470,19 @@ static void ftdi_read_data_cb(struct libusb_transfer *transfer) } } } - ret = libusb_submit_transfer (transfer); - if (ret < 0) - tc->completed = 1; + + if (transfer->status == LIBUSB_TRANSFER_CANCELLED) + tc->completed = LIBUSB_TRANSFER_CANCELLED; + else + { + ret = libusb_submit_transfer (transfer); + if (ret < 0) + tc->completed = 1; + } } -static void ftdi_write_data_cb(struct libusb_transfer *transfer) +static void LIBUSB_CALL ftdi_write_data_cb(struct libusb_transfer *transfer) { struct ftdi_transfer_control *tc = (struct ftdi_transfer_control *) transfer->user_data; struct ftdi_context *ftdi = tc->ftdi; @@ -1352,9 +1503,15 @@ static void ftdi_write_data_cb(struct libusb_transfer *transfer) transfer->length = write_size; transfer->buffer = tc->buf + tc->offset; - ret = libusb_submit_transfer (transfer); - if (ret < 0) - tc->completed = 1; + + if (transfer->status == LIBUSB_TRANSFER_CANCELLED) + tc->completed = LIBUSB_TRANSFER_CANCELLED; + else + { + ret = libusb_submit_transfer (transfer); + if (ret < 0) + tc->completed = 1; + } } } @@ -1399,7 +1556,7 @@ struct ftdi_transfer_control *ftdi_write_data_submit(struct ftdi_context *ftdi, tc->size = size; tc->offset = 0; - if (size < ftdi->writebuffer_chunksize) + if (size < (int)ftdi->writebuffer_chunksize) write_size = size; else write_size = ftdi->writebuffer_chunksize; @@ -1452,7 +1609,7 @@ struct ftdi_transfer_control *ftdi_read_data_submit(struct ftdi_context *ftdi, u tc->buf = buf; tc->size = size; - if (size <= ftdi->readbuffer_remaining) + if (size <= (int)ftdi->readbuffer_remaining) { memcpy (buf, ftdi->readbuffer+ftdi->readbuffer_offset, size); @@ -1517,17 +1674,19 @@ struct ftdi_transfer_control *ftdi_read_data_submit(struct ftdi_context *ftdi, u int ftdi_transfer_data_done(struct ftdi_transfer_control *tc) { int ret; - + struct timeval to = { 0, 0 }; while (!tc->completed) { - ret = libusb_handle_events(tc->ftdi->usb_ctx); + ret = libusb_handle_events_timeout_completed(tc->ftdi->usb_ctx, + &to, &tc->completed); if (ret < 0) { if (ret == LIBUSB_ERROR_INTERRUPTED) continue; libusb_cancel_transfer(tc->transfer); while (!tc->completed) - if (libusb_handle_events(tc->ftdi->usb_ctx) < 0) + if (libusb_handle_events_timeout_completed(tc->ftdi->usb_ctx, + &to, &tc->completed) < 0) break; libusb_free_transfer(tc->transfer); free (tc); @@ -1551,6 +1710,39 @@ int ftdi_transfer_data_done(struct ftdi_transfer_control *tc) } /** + Cancel transfer and wait for completion. + + Use libusb 1.0 asynchronous API. + + \param tc pointer to ftdi_transfer_control + \param to pointer to timeout value or NULL for infinite +*/ + +void ftdi_transfer_data_cancel(struct ftdi_transfer_control *tc, + struct timeval * to) +{ + struct timeval tv = { 0, 0 }; + + if (!tc->completed && tc->transfer != NULL) + { + if (to == NULL) + to = &tv; + + libusb_cancel_transfer(tc->transfer); + while (!tc->completed) + { + if (libusb_handle_events_timeout_completed(tc->ftdi->usb_ctx, to, &tc->completed) < 0) + break; + } + } + + if (tc->transfer) + libusb_free_transfer(tc->transfer); + + free (tc); +} + +/** Configure write buffer chunk size. Default is 4096. @@ -1616,7 +1808,7 @@ int ftdi_read_data(struct ftdi_context *ftdi, unsigned char *buf, int size) ftdi_error_return(-1, "max_packet_size is bogus (zero)"); // everything we want is still in the readbuffer? - if (size <= ftdi->readbuffer_remaining) + if (size <= (int)ftdi->readbuffer_remaining) { memcpy (buf, ftdi->readbuffer+ftdi->readbuffer_offset, size); @@ -1773,21 +1965,19 @@ int ftdi_read_data_get_chunksize(struct ftdi_context *ftdi, unsigned int *chunks return 0; } - /** - Enable bitbang mode. - - \deprecated use \ref ftdi_set_bitmode with mode BITMODE_BITBANG instead + Enable/disable bitbang modes. \param ftdi pointer to ftdi_context \param bitmask Bitmask to configure lines. HIGH/ON value configures a line as output. + \param mode Bitbang mode: use the values defined in \ref ftdi_mpsse_mode \retval 0: all fine \retval -1: can't enable bitbang mode \retval -2: USB device unavailable */ -int ftdi_enable_bitbang(struct ftdi_context *ftdi, unsigned char bitmask) +int ftdi_set_bitmode(struct ftdi_context *ftdi, unsigned char bitmask, unsigned char mode) { unsigned short usb_val; @@ -1795,15 +1985,12 @@ int ftdi_enable_bitbang(struct ftdi_context *ftdi, unsigned char bitmask) ftdi_error_return(-2, "USB device unavailable"); usb_val = bitmask; // low byte: bitmask - /* FT2232C: Set bitbang_mode to 2 to enable SPI */ - usb_val |= (ftdi->bitbang_mode << 8); - - if (libusb_control_transfer(ftdi->usb_dev, FTDI_DEVICE_OUT_REQTYPE, - SIO_SET_BITMODE_REQUEST, usb_val, ftdi->index, - NULL, 0, ftdi->usb_write_timeout) < 0) - ftdi_error_return(-1, "unable to enter bitbang mode. Perhaps not a BM type chip?"); + usb_val |= (mode << 8); + if (libusb_control_transfer(ftdi->usb_dev, FTDI_DEVICE_OUT_REQTYPE, SIO_SET_BITMODE_REQUEST, usb_val, ftdi->index, NULL, 0, ftdi->usb_write_timeout) < 0) + ftdi_error_return(-1, "unable to configure bitbang mode. Perhaps not a BM/2232C type chip?"); - ftdi->bitbang_enabled = 1; + ftdi->bitbang_mode = mode; + ftdi->bitbang_enabled = (mode == BITMODE_RESET) ? 0 : 1; return 0; } @@ -1828,34 +2015,6 @@ int ftdi_disable_bitbang(struct ftdi_context *ftdi) return 0; } -/** - Enable/disable bitbang modes. - - \param ftdi pointer to ftdi_context - \param bitmask Bitmask to configure lines. - HIGH/ON value configures a line as output. - \param mode Bitbang mode: use the values defined in \ref ftdi_mpsse_mode - - \retval 0: all fine - \retval -1: can't enable bitbang mode - \retval -2: USB device unavailable -*/ -int ftdi_set_bitmode(struct ftdi_context *ftdi, unsigned char bitmask, unsigned char mode) -{ - unsigned short usb_val; - - if (ftdi == NULL || ftdi->usb_dev == NULL) - ftdi_error_return(-2, "USB device unavailable"); - - usb_val = bitmask; // low byte: bitmask - usb_val |= (mode << 8); - if (libusb_control_transfer(ftdi->usb_dev, FTDI_DEVICE_OUT_REQTYPE, SIO_SET_BITMODE_REQUEST, usb_val, ftdi->index, NULL, 0, ftdi->usb_write_timeout) < 0) - ftdi_error_return(-1, "unable to configure bitbang mode. Perhaps not a 2232C type chip?"); - - ftdi->bitbang_mode = mode; - ftdi->bitbang_enabled = (mode == BITMODE_RESET) ? 0 : 1; - return 0; -} /** Directly read pin state, circumventing the read buffer. Useful for bitbang mode. @@ -1984,7 +2143,7 @@ int ftdi_poll_modem_status(struct ftdi_context *ftdi, unsigned short *status) if (libusb_control_transfer(ftdi->usb_dev, FTDI_DEVICE_IN_REQTYPE, SIO_POLL_MODEM_STATUS_REQUEST, 0, ftdi->index, (unsigned char *)usb_val, 2, ftdi->usb_read_timeout) != 2) ftdi_error_return(-1, "getting modem status failed"); - *status = (usb_val[1] << 8) | usb_val[0]; + *status = (usb_val[1] << 8) | (usb_val[0] & 0xFF); return 0; } @@ -2168,7 +2327,7 @@ int ftdi_set_error_char(struct ftdi_context *ftdi, } /** - Init eeprom with default values. + Init eeprom with default values for the connected device \param ftdi pointer to ftdi_context \param manufacturer String to use as Manufacturer \param product String to use as Product description @@ -2177,6 +2336,7 @@ int ftdi_set_error_char(struct ftdi_context *ftdi, \retval 0: all fine \retval -1: No struct ftdi_context \retval -2: No struct ftdi_eeprom + \retval -3: No connected device or device not yet opened */ int ftdi_eeprom_initdefaults(struct ftdi_context *ftdi, char * manufacturer, char * product, char * serial) @@ -2192,13 +2352,23 @@ int ftdi_eeprom_initdefaults(struct ftdi_context *ftdi, char * manufacturer, eeprom = ftdi->eeprom; memset(eeprom, 0, sizeof(struct ftdi_eeprom)); + if (ftdi->usb_dev == NULL) + ftdi_error_return(-3, "No connected device or device not yet opened"); + eeprom->vendor_id = 0x0403; - eeprom->use_serial = USE_SERIAL_NUM; + eeprom->use_serial = 1; if ((ftdi->type == TYPE_AM) || (ftdi->type == TYPE_BM) || (ftdi->type == TYPE_R)) eeprom->product_id = 0x6001; + else if (ftdi->type == TYPE_4232H) + eeprom->product_id = 0x6011; + else if (ftdi->type == TYPE_232H) + eeprom->product_id = 0x6014; + else if (ftdi->type == TYPE_230X) + eeprom->product_id = 0x6015; else eeprom->product_id = 0x6010; + if (ftdi->type == TYPE_AM) eeprom->usb_version = 0x0101; else @@ -2218,11 +2388,32 @@ int ftdi_eeprom_initdefaults(struct ftdi_context *ftdi, char * manufacturer, if (eeprom->product) free (eeprom->product); eeprom->product = NULL; + if(product) { eeprom->product = malloc(strlen(product)+1); if (eeprom->product) strcpy(eeprom->product, product); } + else + { + const char* default_product; + switch(ftdi->type) + { + case TYPE_AM: default_product = "AM"; break; + case TYPE_BM: default_product = "BM"; break; + case TYPE_2232C: default_product = "Dual RS232"; break; + case TYPE_R: default_product = "FT232R USB UART"; break; + case TYPE_2232H: default_product = "Dual RS232-HS"; break; + case TYPE_4232H: default_product = "FT4232H"; break; + case TYPE_232H: default_product = "Single-RS232-HS"; break; + case TYPE_230X: default_product = "FT230X Basic UART"; break; + default: + ftdi_error_return(-3, "Unknown chip type"); + } + eeprom->product = malloc(strlen(default_product) +1); + if (eeprom->product) + strcpy(eeprom->product, default_product); + } if (eeprom->serial) free (eeprom->serial); @@ -2234,7 +2425,6 @@ int ftdi_eeprom_initdefaults(struct ftdi_context *ftdi, char * manufacturer, strcpy(eeprom->serial, serial); } - if (ftdi->type == TYPE_R) { eeprom->max_power = 90; @@ -2245,8 +2435,159 @@ int ftdi_eeprom_initdefaults(struct ftdi_context *ftdi, char * manufacturer, eeprom->cbus_function[3] = CBUS_PWREN; eeprom->cbus_function[4] = CBUS_SLEEP; } + else if (ftdi->type == TYPE_230X) + { + eeprom->max_power = 90; + eeprom->size = 0x100; + eeprom->cbus_function[0] = CBUSX_TXDEN; + eeprom->cbus_function[1] = CBUSX_RXLED; + eeprom->cbus_function[2] = CBUSX_TXLED; + eeprom->cbus_function[3] = CBUSX_SLEEP; + } else + { + if(ftdi->type == TYPE_232H) + { + int i; + for (i=0; i<10; i++) + eeprom->cbus_function[i] = CBUSH_TRISTATE; + } eeprom->size = -1; + } + switch (ftdi->type) + { + case TYPE_AM: + eeprom->release_number = 0x0200; + break; + case TYPE_BM: + eeprom->release_number = 0x0400; + break; + case TYPE_2232C: + eeprom->release_number = 0x0500; + break; + case TYPE_R: + eeprom->release_number = 0x0600; + break; + case TYPE_2232H: + eeprom->release_number = 0x0700; + break; + case TYPE_4232H: + eeprom->release_number = 0x0800; + break; + case TYPE_232H: + eeprom->release_number = 0x0900; + break; + case TYPE_230X: + eeprom->release_number = 0x1000; + break; + default: + eeprom->release_number = 0x00; + } + return 0; +} + +int ftdi_eeprom_set_strings(struct ftdi_context *ftdi, char * manufacturer, + char * product, char * serial) +{ + struct ftdi_eeprom *eeprom; + + if (ftdi == NULL) + ftdi_error_return(-1, "No struct ftdi_context"); + + if (ftdi->eeprom == NULL) + ftdi_error_return(-2,"No struct ftdi_eeprom"); + + eeprom = ftdi->eeprom; + + if (ftdi->usb_dev == NULL) + ftdi_error_return(-3, "No connected device or device not yet opened"); + + if (manufacturer) + { + if (eeprom->manufacturer) + free (eeprom->manufacturer); + eeprom->manufacturer = malloc(strlen(manufacturer)+1); + if (eeprom->manufacturer) + strcpy(eeprom->manufacturer, manufacturer); + } + + if(product) + { + if (eeprom->product) + free (eeprom->product); + eeprom->product = malloc(strlen(product)+1); + if (eeprom->product) + strcpy(eeprom->product, product); + } + + if (serial) + { + if (eeprom->serial) + free (eeprom->serial); + eeprom->serial = malloc(strlen(serial)+1); + if (eeprom->serial) + { + strcpy(eeprom->serial, serial); + eeprom->use_serial = 1; + } + } + return 0; +} + + +/*FTD2XX doesn't check for values not fitting in the ACBUS Signal options*/ +void set_ft232h_cbus(struct ftdi_eeprom *eeprom, unsigned char * output) +{ + int i; + for(i=0; i<5; i++) + { + int mode_low, mode_high; + if (eeprom->cbus_function[2*i]> CBUSH_CLK7_5) + mode_low = CBUSH_TRISTATE; + else + mode_low = eeprom->cbus_function[2*i]; + if (eeprom->cbus_function[2*i+1]> CBUSH_CLK7_5) + mode_high = CBUSH_TRISTATE; + else + mode_high = eeprom->cbus_function[2*i+1]; + + output[0x18+i] = (mode_high <<4) | mode_low; + } +} +/* Return the bits for the encoded EEPROM Structure of a requested Mode + * + */ +static unsigned char type2bit(unsigned char type, enum ftdi_chip_type chip) +{ + switch (chip) + { + case TYPE_2232H: + case TYPE_2232C: + { + switch (type) + { + case CHANNEL_IS_UART: return 0; + case CHANNEL_IS_FIFO: return 0x01; + case CHANNEL_IS_OPTO: return 0x02; + case CHANNEL_IS_CPU : return 0x04; + default: return 0; + } + } + case TYPE_232H: + { + switch (type) + { + case CHANNEL_IS_UART : return 0; + case CHANNEL_IS_FIFO : return 0x01; + case CHANNEL_IS_OPTO : return 0x02; + case CHANNEL_IS_CPU : return 0x04; + case CHANNEL_IS_FT1284 : return 0x08; + default: return 0; + } + } + case TYPE_230X: /* FT230X is only UART */ + default: return 0; + } return 0; } @@ -2269,7 +2610,7 @@ int ftdi_eeprom_build(struct ftdi_context *ftdi) unsigned char i, j, eeprom_size_mask; unsigned short checksum, value; unsigned char manufacturer_size = 0, product_size = 0, serial_size = 0; - int user_area_size; + int user_area_size, free_start, free_end; struct ftdi_eeprom *eeprom; unsigned char * output; @@ -2284,10 +2625,13 @@ int ftdi_eeprom_build(struct ftdi_context *ftdi) if (eeprom->chip == -1) ftdi_error_return(-6,"No connected EEPROM or EEPROM type unknown"); - if ((eeprom->chip == 0x56) || (eeprom->chip == 0x66)) - eeprom->size = 0x100; - else - eeprom->size = 0x80; + if (eeprom->size == -1) + { + if ((eeprom->chip == 0x56) || (eeprom->chip == 0x66)) + eeprom->size = 0x100; + else + eeprom->size = 0x80; + } if (eeprom->manufacturer != NULL) manufacturer_size = strlen(eeprom->manufacturer); @@ -2301,18 +2645,22 @@ int ftdi_eeprom_build(struct ftdi_context *ftdi) { case TYPE_AM: case TYPE_BM: + case TYPE_R: user_area_size = 96; // base size for strings (total of 48 characters) break; case TYPE_2232C: user_area_size = 90; // two extra config bytes and 4 bytes PnP stuff break; - case TYPE_R: + case TYPE_230X: user_area_size = 88; // four extra config bytes + 4 bytes PnP stuff break; case TYPE_2232H: // six extra config bytes + 4 bytes PnP stuff case TYPE_4232H: user_area_size = 86; break; + case TYPE_232H: + user_area_size = 80; + break; default: user_area_size = 0; break; @@ -2323,7 +2671,17 @@ int ftdi_eeprom_build(struct ftdi_context *ftdi) ftdi_error_return(-1,"eeprom size exceeded"); // empty eeprom - memset (ftdi->eeprom->buf, 0, FTDI_MAX_EEPROM_SIZE); + if (ftdi->type == TYPE_230X) + { + /* FT230X have a reserved section in the middle of the MTP, + which cannot be written to, but must be included in the checksum */ + memset(ftdi->eeprom->buf, 0, 0x80); + memset((ftdi->eeprom->buf + 0xa0), 0, (FTDI_MAX_EEPROM_SIZE - 0xa0)); + } + else + { + memset(ftdi->eeprom->buf, 0, FTDI_MAX_EEPROM_SIZE); + } // Bytes and Bits set for all Types @@ -2336,30 +2694,8 @@ int ftdi_eeprom_build(struct ftdi_context *ftdi) output[0x05] = eeprom->product_id >> 8; // Addr 06: Device release number (0400h for BM features) - output[0x06] = 0x00; - switch (ftdi->type) - { - case TYPE_AM: - output[0x07] = 0x02; - break; - case TYPE_BM: - output[0x07] = 0x04; - break; - case TYPE_2232C: - output[0x07] = 0x05; - break; - case TYPE_R: - output[0x07] = 0x06; - break; - case TYPE_2232H: - output[0x07] = 0x07; - break; - case TYPE_4232H: - output[0x07] = 0x08; - break; - default: - output[0x07] = 0x00; - } + output[0x06] = eeprom->release_number; + output[0x07] = eeprom->release_number >> 8; // Addr 08: Config descriptor // Bit 7: always 1 @@ -2367,16 +2703,16 @@ int ftdi_eeprom_build(struct ftdi_context *ftdi) // Bit 5: 1 if this device uses remote wakeup // Bit 4-0: reserved - 0 j = 0x80; - if (eeprom->self_powered == 1) + if (eeprom->self_powered) j |= 0x40; - if (eeprom->remote_wakeup == 1) + if (eeprom->remote_wakeup) j |= 0x20; output[0x08] = j; // Addr 09: Max power consumption: max power = value * 2 mA - output[0x09] = eeprom->max_power>>1; + output[0x09] = eeprom->max_power / MAX_POWER_MILLIAMP_PER_UNIT; - if (ftdi->type != TYPE_AM) + if ((ftdi->type != TYPE_AM) && (ftdi->type != TYPE_230X)) { // Addr 0A: Chip configuration // Bit 7: 0 - reserved @@ -2389,9 +2725,9 @@ int ftdi_eeprom_build(struct ftdi_context *ftdi) // Bit 0: 1 - In EndPoint is Isochronous // j = 0; - if (eeprom->in_is_isochronous == 1) + if (eeprom->in_is_isochronous) j = j | 1; - if (eeprom->out_is_isochronous == 1) + if (eeprom->out_is_isochronous) j = j | 2; output[0x0A] = j; } @@ -2399,6 +2735,7 @@ int ftdi_eeprom_build(struct ftdi_context *ftdi) // Dynamic content // Strings start at 0x94 (TYPE_AM, TYPE_BM) // 0x96 (TYPE_2232C), 0x98 (TYPE_R) and 0x9a (TYPE_x232H) + // 0xa0 (TYPE_232H) i = 0; switch (ftdi->type) { @@ -2412,9 +2749,15 @@ int ftdi_eeprom_build(struct ftdi_context *ftdi) case TYPE_AM: case TYPE_BM: i += 0x94; + break; + case TYPE_232H: + case TYPE_230X: + i = 0xa0; + break; } /* Wrap around 0x80 for 128 byte EEPROMS (Internale and 93x46) */ eeprom_size_mask = eeprom->size -1; + free_end = i & eeprom_size_mask; // Addr 0E: Offset of the manufacturer string + 0x80, calculated later // Addr 0F: Length of manufacturer string @@ -2467,7 +2810,7 @@ int ftdi_eeprom_build(struct ftdi_context *ftdi) if (ftdi->type > TYPE_AM) /* use_serial not used in AM devices */ { - if (eeprom->use_serial == USE_SERIAL_NUM ) + if (eeprom->use_serial) output[0x0A] |= USE_SERIAL_NUM; else output[0x0A] &= ~USE_SERIAL_NUM; @@ -2482,7 +2825,7 @@ int ftdi_eeprom_build(struct ftdi_context *ftdi) case TYPE_BM: output[0x0C] = eeprom->usb_version & 0xff; output[0x0D] = (eeprom->usb_version>>8) & 0xff; - if (eeprom->use_usb_version == USE_USB_VERSION_BIT) + if (eeprom->use_usb_version) output[0x0A] |= USE_USB_VERSION_BIT; else output[0x0A] &= ~USE_USB_VERSION_BIT; @@ -2490,7 +2833,7 @@ int ftdi_eeprom_build(struct ftdi_context *ftdi) break; case TYPE_2232C: - output[0x00] = (eeprom->channel_a_type); + output[0x00] = type2bit(eeprom->channel_a_type, TYPE_2232C); if ( eeprom->channel_a_driver == DRIVER_VCP) output[0x00] |= DRIVER_VCP; else @@ -2501,7 +2844,7 @@ int ftdi_eeprom_build(struct ftdi_context *ftdi) else output[0x00] &= ~HIGH_CURRENT_DRIVE; - output[0x01] = (eeprom->channel_b_type); + output[0x01] = type2bit(eeprom->channel_b_type, TYPE_2232C); if ( eeprom->channel_b_driver == DRIVER_VCP) output[0x01] |= DRIVER_VCP; else @@ -2512,19 +2855,19 @@ int ftdi_eeprom_build(struct ftdi_context *ftdi) else output[0x01] &= ~HIGH_CURRENT_DRIVE; - if (eeprom->in_is_isochronous == 1) + if (eeprom->in_is_isochronous) output[0x0A] |= 0x1; else output[0x0A] &= ~0x1; - if (eeprom->out_is_isochronous == 1) + if (eeprom->out_is_isochronous) output[0x0A] |= 0x2; else output[0x0A] &= ~0x2; - if (eeprom->suspend_pull_downs == 1) + if (eeprom->suspend_pull_downs) output[0x0A] |= 0x4; else output[0x0A] &= ~0x4; - if (eeprom->use_usb_version == USE_USB_VERSION_BIT) + if (eeprom->use_usb_version) output[0x0A] |= USE_USB_VERSION_BIT; else output[0x0A] &= ~USE_USB_VERSION_BIT; @@ -2536,9 +2879,11 @@ int ftdi_eeprom_build(struct ftdi_context *ftdi) case TYPE_R: if (eeprom->high_current == HIGH_CURRENT_DRIVE_R) output[0x00] |= HIGH_CURRENT_DRIVE_R; + if (eeprom->external_oscillator) + output[0x00] |= 0x02; output[0x01] = 0x40; /* Hard coded Endpoint Size*/ - if (eeprom->suspend_pull_downs == 1) + if (eeprom->suspend_pull_downs) output[0x0A] |= 0x4; else output[0x0A] &= ~0x4; @@ -2546,22 +2891,22 @@ int ftdi_eeprom_build(struct ftdi_context *ftdi) output[0x0C] = eeprom->usb_version & 0xff; output[0x0D] = (eeprom->usb_version>>8) & 0xff; - if (eeprom->cbus_function[0] > CBUS_BB) + if (eeprom->cbus_function[0] > CBUS_BB_RD) output[0x14] = CBUS_TXLED; else output[0x14] = eeprom->cbus_function[0]; - if (eeprom->cbus_function[1] > CBUS_BB) + if (eeprom->cbus_function[1] > CBUS_BB_RD) output[0x14] |= CBUS_RXLED<<4; else output[0x14] |= eeprom->cbus_function[1]<<4; - if (eeprom->cbus_function[2] > CBUS_BB) + if (eeprom->cbus_function[2] > CBUS_BB_RD) output[0x15] = CBUS_TXDEN; else output[0x15] = eeprom->cbus_function[2]; - if (eeprom->cbus_function[3] > CBUS_BB) + if (eeprom->cbus_function[3] > CBUS_BB_RD) output[0x15] |= CBUS_PWREN<<4; else output[0x15] |= eeprom->cbus_function[3]<<4; @@ -2572,13 +2917,13 @@ int ftdi_eeprom_build(struct ftdi_context *ftdi) output[0x16] = eeprom->cbus_function[4]; break; case TYPE_2232H: - output[0x00] = (eeprom->channel_a_type); + output[0x00] = type2bit(eeprom->channel_a_type, TYPE_2232H); if ( eeprom->channel_a_driver == DRIVER_VCP) output[0x00] |= DRIVER_VCP; else output[0x00] &= ~DRIVER_VCP; - output[0x01] = (eeprom->channel_b_type); + output[0x01] = type2bit(eeprom->channel_b_type, TYPE_2232H); if ( eeprom->channel_b_driver == DRIVER_VCP) output[0x01] |= DRIVER_VCP; else @@ -2588,7 +2933,7 @@ int ftdi_eeprom_build(struct ftdi_context *ftdi) else output[0x01] &= ~SUSPEND_DBUS7_BIT; - if (eeprom->suspend_pull_downs == 1) + if (eeprom->suspend_pull_downs) output[0x0A] |= 0x4; else output[0x0A] &= ~0x4; @@ -2633,7 +2978,178 @@ int ftdi_eeprom_build(struct ftdi_context *ftdi) break; case TYPE_4232H: - fprintf(stderr,"FIXME: Build FT4232H specific EEPROM settings\n"); + if (eeprom->channel_a_driver == DRIVER_VCP) + output[0x00] |= DRIVER_VCP; + else + output[0x00] &= ~DRIVER_VCP; + if (eeprom->channel_b_driver == DRIVER_VCP) + output[0x01] |= DRIVER_VCP; + else + output[0x01] &= ~DRIVER_VCP; + if (eeprom->channel_c_driver == DRIVER_VCP) + output[0x00] |= (DRIVER_VCP << 4); + else + output[0x00] &= ~(DRIVER_VCP << 4); + if (eeprom->channel_d_driver == DRIVER_VCP) + output[0x01] |= (DRIVER_VCP << 4); + else + output[0x01] &= ~(DRIVER_VCP << 4); + + if (eeprom->suspend_pull_downs) + output[0x0a] |= 0x4; + else + output[0x0a] &= ~0x4; + + if (eeprom->channel_a_rs485enable) + output[0x0b] |= CHANNEL_IS_RS485 << 0; + else + output[0x0b] &= ~(CHANNEL_IS_RS485 << 0); + if (eeprom->channel_b_rs485enable) + output[0x0b] |= CHANNEL_IS_RS485 << 1; + else + output[0x0b] &= ~(CHANNEL_IS_RS485 << 1); + if (eeprom->channel_c_rs485enable) + output[0x0b] |= CHANNEL_IS_RS485 << 2; + else + output[0x0b] &= ~(CHANNEL_IS_RS485 << 2); + if (eeprom->channel_d_rs485enable) + output[0x0b] |= CHANNEL_IS_RS485 << 3; + else + output[0x0b] &= ~(CHANNEL_IS_RS485 << 3); + + if (eeprom->group0_drive > DRIVE_16MA) + output[0x0c] |= DRIVE_16MA; + else + output[0x0c] |= eeprom->group0_drive; + if (eeprom->group0_schmitt == IS_SCHMITT) + output[0x0c] |= IS_SCHMITT; + if (eeprom->group0_slew == SLOW_SLEW) + output[0x0c] |= SLOW_SLEW; + + if (eeprom->group1_drive > DRIVE_16MA) + output[0x0c] |= DRIVE_16MA<<4; + else + output[0x0c] |= eeprom->group1_drive<<4; + if (eeprom->group1_schmitt == IS_SCHMITT) + output[0x0c] |= IS_SCHMITT<<4; + if (eeprom->group1_slew == SLOW_SLEW) + output[0x0c] |= SLOW_SLEW<<4; + + if (eeprom->group2_drive > DRIVE_16MA) + output[0x0d] |= DRIVE_16MA; + else + output[0x0d] |= eeprom->group2_drive; + if (eeprom->group2_schmitt == IS_SCHMITT) + output[0x0d] |= IS_SCHMITT; + if (eeprom->group2_slew == SLOW_SLEW) + output[0x0d] |= SLOW_SLEW; + + if (eeprom->group3_drive > DRIVE_16MA) + output[0x0d] |= DRIVE_16MA<<4; + else + output[0x0d] |= eeprom->group3_drive<<4; + if (eeprom->group3_schmitt == IS_SCHMITT) + output[0x0d] |= IS_SCHMITT<<4; + if (eeprom->group3_slew == SLOW_SLEW) + output[0x0d] |= SLOW_SLEW<<4; + + output[0x18] = eeprom->chip; + + break; + case TYPE_232H: + output[0x00] = type2bit(eeprom->channel_a_type, TYPE_232H); + if ( eeprom->channel_a_driver == DRIVER_VCP) + output[0x00] |= DRIVER_VCPH; + else + output[0x00] &= ~DRIVER_VCPH; + if (eeprom->powersave) + output[0x01] |= POWER_SAVE_DISABLE_H; + else + output[0x01] &= ~POWER_SAVE_DISABLE_H; + + if (eeprom->suspend_pull_downs) + output[0x0a] |= 0x4; + else + output[0x0a] &= ~0x4; + + if (eeprom->clock_polarity) + output[0x01] |= FT1284_CLK_IDLE_STATE; + else + output[0x01] &= ~FT1284_CLK_IDLE_STATE; + if (eeprom->data_order) + output[0x01] |= FT1284_DATA_LSB; + else + output[0x01] &= ~FT1284_DATA_LSB; + if (eeprom->flow_control) + output[0x01] |= FT1284_FLOW_CONTROL; + else + output[0x01] &= ~FT1284_FLOW_CONTROL; + if (eeprom->group0_drive > DRIVE_16MA) + output[0x0c] |= DRIVE_16MA; + else + output[0x0c] |= eeprom->group0_drive; + if (eeprom->group0_schmitt == IS_SCHMITT) + output[0x0c] |= IS_SCHMITT; + if (eeprom->group0_slew == SLOW_SLEW) + output[0x0c] |= SLOW_SLEW; + + if (eeprom->group1_drive > DRIVE_16MA) + output[0x0d] |= DRIVE_16MA; + else + output[0x0d] |= eeprom->group1_drive; + if (eeprom->group1_schmitt == IS_SCHMITT) + output[0x0d] |= IS_SCHMITT; + if (eeprom->group1_slew == SLOW_SLEW) + output[0x0d] |= SLOW_SLEW; + + set_ft232h_cbus(eeprom, output); + + output[0x1e] = eeprom->chip; + fprintf(stderr,"FIXME: Build FT232H specific EEPROM settings\n"); + break; + case TYPE_230X: + output[0x00] = 0x80; /* Actually, leave the default value */ + output[0x0a] = 0x08; /* Enable USB Serial Number */ + /*FIXME: Make DBUS & CBUS Control configurable*/ + output[0x0c] = 0; /* DBUS drive 4mA, CBUS drive 4 mA like factory default */ + for (j = 0; j <= 6; j++) + { + output[0x1a + j] = eeprom->cbus_function[j]; + } + output[0x0b] = eeprom->invert; + break; + } + + /* First address without use */ + free_start = 0; + switch (ftdi->type) + { + case TYPE_230X: + free_start += 2; + case TYPE_232H: + free_start += 6; + case TYPE_2232H: + case TYPE_4232H: + free_start += 2; + case TYPE_R: + free_start += 2; + case TYPE_2232C: + free_start++; + case TYPE_AM: + case TYPE_BM: + free_start += 0x14; + } + + /* Arbitrary user data */ + if (eeprom->user_data && eeprom->user_data_size >= 0) + { + if (eeprom->user_data_addr < free_start) + fprintf(stderr,"Warning, user data starts inside the generated data!\n"); + if (eeprom->user_data_addr + eeprom->user_data_size >= free_end) + fprintf(stderr,"Warning, user data overlaps the strings area!\n"); + if (eeprom->user_data_addr + eeprom->user_data_size > eeprom->size) + ftdi_error_return(-1,"eeprom size exceeded"); + memcpy(output + eeprom->user_data_addr, eeprom->user_data, eeprom->user_data_size); } // calculate checksum @@ -2641,9 +3157,23 @@ int ftdi_eeprom_build(struct ftdi_context *ftdi) for (i = 0; i < eeprom->size/2-1; i++) { - value = output[i*2]; - value += output[(i*2)+1] << 8; - + if ((ftdi->type == TYPE_230X) && (i == 0x12)) + { + /* FT230X has a user section in the MTP which is not part of the checksum */ + i = 0x40; + } + if ((ftdi->type == TYPE_230X) && (i >= 0x40) && (i < 0x50)) { + uint16_t data; + if (ftdi_read_eeprom_location(ftdi, i, &data)) { + fprintf(stderr, "Reading Factory Configuration Data failed\n"); + i = 0x50; + } + value = data; + } + else { + value = output[i*2]; + value += output[(i*2)+1] << 8; + } checksum = value^checksum; checksum = (checksum << 1) | (checksum >> 15); } @@ -2651,12 +3181,49 @@ int ftdi_eeprom_build(struct ftdi_context *ftdi) output[eeprom->size-2] = checksum; output[eeprom->size-1] = checksum >> 8; + eeprom->initialized_for_connected_device = 1; return user_area_size; } +/* Decode the encoded EEPROM field for the FTDI Mode into a value for the abstracted + * EEPROM structure + * + * FTD2XX doesn't allow to set multiple bits in the interface mode bitfield, and so do we + */ +static unsigned char bit2type(unsigned char bits) +{ + switch (bits) + { + case 0: return CHANNEL_IS_UART; + case 1: return CHANNEL_IS_FIFO; + case 2: return CHANNEL_IS_OPTO; + case 4: return CHANNEL_IS_CPU; + case 8: return CHANNEL_IS_FT1284; + default: + fprintf(stderr," Unexpected value %d for Hardware Interface type\n", + bits); + } + return 0; +} +/* Decode 230X / 232R type chips invert bits + * Prints directly to stdout. +*/ +static void print_inverted_bits(int invert) +{ + char *r_bits[] = {"TXD","RXD","RTS","CTS","DTR","DSR","DCD","RI"}; + int i; + + fprintf(stdout,"Inverted bits:"); + for (i=0; i<8; i++) + if ((invert & (1<eeprom->buf; - int release; + unsigned char *buf = NULL; if (ftdi == NULL) ftdi_error_return(-1,"No context"); @@ -2683,6 +3249,7 @@ int ftdi_eeprom_decode(struct ftdi_context *ftdi, int verbose) eeprom = ftdi->eeprom; eeprom_size = eeprom->size; + buf = ftdi->eeprom->buf; // Addr 02: Vendor ID eeprom->vendor_id = buf[0x02] + (buf[0x03] << 8); @@ -2690,7 +3257,8 @@ int ftdi_eeprom_decode(struct ftdi_context *ftdi, int verbose) // Addr 04: Product ID eeprom->product_id = buf[0x04] + (buf[0x05] << 8); - release = buf[0x06] + (buf[0x07]<<8); + // Addr 06: Device release number + eeprom->release_number = buf[0x06] + (buf[0x07]<<8); // Addr 08: Config descriptor // Bit 7: always 1 @@ -2700,7 +3268,7 @@ int ftdi_eeprom_decode(struct ftdi_context *ftdi, int verbose) eeprom->remote_wakeup = buf[0x08] & 0x20; // Addr 09: Max power consumption: max power = value * 2 mA - eeprom->max_power = buf[0x09]; + eeprom->max_power = MAX_POWER_MILLIAMP_PER_UNIT * buf[0x09]; // Addr 0A: Chip configuration // Bit 7: 0 - reserved @@ -2715,8 +3283,8 @@ int ftdi_eeprom_decode(struct ftdi_context *ftdi, int verbose) eeprom->in_is_isochronous = buf[0x0A]&0x01; eeprom->out_is_isochronous = buf[0x0A]&0x02; eeprom->suspend_pull_downs = buf[0x0A]&0x04; - eeprom->use_serial = buf[0x0A] & USE_SERIAL_NUM; - eeprom->use_usb_version = buf[0x0A] & USE_USB_VERSION_BIT; + eeprom->use_serial = !!(buf[0x0A] & USE_SERIAL_NUM); + eeprom->use_usb_version = !!(buf[0x0A] & USE_USB_VERSION_BIT); // Addr 0C: USB version low byte when 0x0A // Addr 0D: USB version high byte when 0x0A @@ -2734,7 +3302,7 @@ int ftdi_eeprom_decode(struct ftdi_context *ftdi, int verbose) { // Decode manufacturer i = buf[0x0E] & (eeprom_size -1); // offset - for (j=0;jmanufacturer[j] = buf[2*j+i+2]; } @@ -2755,7 +3323,7 @@ int ftdi_eeprom_decode(struct ftdi_context *ftdi, int verbose) { // Decode product name i = buf[0x10] & (eeprom_size -1); // offset - for (j=0;jproduct[j] = buf[2*j+i+2]; } @@ -2776,7 +3344,7 @@ int ftdi_eeprom_decode(struct ftdi_context *ftdi, int verbose) { // Decode serial i = buf[0x12] & (eeprom_size -1); // offset - for (j=0;jserial[j] = buf[2*j+i+2]; } @@ -2790,6 +3358,11 @@ int ftdi_eeprom_decode(struct ftdi_context *ftdi, int verbose) for (i = 0; i < eeprom_size/2-1; i++) { + if ((ftdi->type == TYPE_230X) && (i == 0x12)) + { + /* FT230X has a user section in the MTP which is not part of the checksum */ + i = 0x40; + } value = buf[i*2]; value += buf[(i*2)+1] << 8; @@ -2812,7 +3385,7 @@ int ftdi_eeprom_decode(struct ftdi_context *ftdi, int verbose) } else if (ftdi->type == TYPE_2232C) { - eeprom->channel_a_type = buf[0x00] & 0x7; + eeprom->channel_a_type = bit2type(buf[0x00] & 0x7); eeprom->channel_a_driver = buf[0x00] & DRIVER_VCP; eeprom->high_current_a = buf[0x00] & HIGH_CURRENT_DRIVE; eeprom->channel_b_type = buf[0x01] & 0x7; @@ -2823,8 +3396,9 @@ int ftdi_eeprom_decode(struct ftdi_context *ftdi, int verbose) else if (ftdi->type == TYPE_R) { /* TYPE_R flags D2XX, not VCP as all others*/ - eeprom->channel_a_driver = (~buf[0x00]) & DRIVER_VCP; + eeprom->channel_a_driver = ~buf[0x00] & DRIVER_VCP; eeprom->high_current = buf[0x00] & HIGH_CURRENT_DRIVE_R; + eeprom->external_oscillator = buf[0x00] & 0x02; if ( (buf[0x01]&0x40) != 0x40) fprintf(stderr, "TYPE_R EEPROM byte[0x01] Bit 6 unexpected Endpoint size." @@ -2845,15 +3419,26 @@ int ftdi_eeprom_decode(struct ftdi_context *ftdi, int verbose) eeprom->cbus_function[3] = (buf[0x15] >> 4) & 0x0f; eeprom->cbus_function[4] = buf[0x16] & 0x0f; } - else if ((ftdi->type == TYPE_2232H) ||(ftdi->type == TYPE_4232H)) + else if ((ftdi->type == TYPE_2232H) || (ftdi->type == TYPE_4232H)) { - eeprom->channel_a_type = buf[0x00] & 0x7; eeprom->channel_a_driver = buf[0x00] & DRIVER_VCP; - eeprom->channel_b_type = buf[0x01] & 0x7; eeprom->channel_b_driver = buf[0x01] & DRIVER_VCP; if (ftdi->type == TYPE_2232H) + { + eeprom->channel_a_type = bit2type(buf[0x00] & 0x7); + eeprom->channel_b_type = bit2type(buf[0x01] & 0x7); eeprom->suspend_dbus7 = buf[0x01] & SUSPEND_DBUS7_BIT; + } + else + { + eeprom->channel_c_driver = (buf[0x00] >> 4) & DRIVER_VCP; + eeprom->channel_d_driver = (buf[0x01] >> 4) & DRIVER_VCP; + eeprom->channel_a_rs485enable = buf[0x0b] & (CHANNEL_IS_RS485 << 0); + eeprom->channel_b_rs485enable = buf[0x0b] & (CHANNEL_IS_RS485 << 1); + eeprom->channel_c_rs485enable = buf[0x0b] & (CHANNEL_IS_RS485 << 2); + eeprom->channel_d_rs485enable = buf[0x0b] & (CHANNEL_IS_RS485 << 3); + } eeprom->chip = buf[0x18]; eeprom->group0_drive = buf[0x0c] & DRIVE_16MA; @@ -2869,18 +3454,56 @@ int ftdi_eeprom_decode(struct ftdi_context *ftdi, int verbose) eeprom->group3_schmitt = (buf[0x0d] >> 4) & IS_SCHMITT; eeprom->group3_slew = (buf[0x0d] >> 4) & SLOW_SLEW; } + else if (ftdi->type == TYPE_232H) + { + eeprom->channel_a_type = buf[0x00] & 0xf; + eeprom->channel_a_driver = (buf[0x00] & DRIVER_VCPH)?DRIVER_VCP:0; + eeprom->clock_polarity = buf[0x01] & FT1284_CLK_IDLE_STATE; + eeprom->data_order = buf[0x01] & FT1284_DATA_LSB; + eeprom->flow_control = buf[0x01] & FT1284_FLOW_CONTROL; + eeprom->powersave = buf[0x01] & POWER_SAVE_DISABLE_H; + eeprom->group0_drive = buf[0x0c] & DRIVE_16MA; + eeprom->group0_schmitt = buf[0x0c] & IS_SCHMITT; + eeprom->group0_slew = buf[0x0c] & SLOW_SLEW; + eeprom->group1_drive = buf[0x0d] & DRIVE_16MA; + eeprom->group1_schmitt = buf[0x0d] & IS_SCHMITT; + eeprom->group1_slew = buf[0x0d] & SLOW_SLEW; + + for(i=0; i<5; i++) + { + eeprom->cbus_function[2*i ] = buf[0x18+i] & 0x0f; + eeprom->cbus_function[2*i+1] = (buf[0x18+i] >> 4) & 0x0f; + } + eeprom->chip = buf[0x1e]; + /*FIXME: Decipher more values*/ + } + else if (ftdi->type == TYPE_230X) + { + for(i=0; i<4; i++) + { + eeprom->cbus_function[i] = buf[0x1a + i] & 0xFF; + } + eeprom->group0_drive = buf[0x0c] & 0x03; + eeprom->group0_schmitt = buf[0x0c] & IS_SCHMITT; + eeprom->group0_slew = buf[0x0c] & SLOW_SLEW; + eeprom->group1_drive = (buf[0x0c] >> 4) & 0x03; + eeprom->group1_schmitt = (buf[0x0c] >> 4) & IS_SCHMITT; + eeprom->group1_slew = (buf[0x0c] >> 4) & SLOW_SLEW; + + eeprom->invert = buf[0xb]; + } if (verbose) { - char *channel_mode[] = {"UART","245","CPU", "unknown", "OPTO"}; + char *channel_mode[] = {"UART", "FIFO", "CPU", "OPTO", "FT1284"}; fprintf(stdout, "VID: 0x%04x\n",eeprom->vendor_id); fprintf(stdout, "PID: 0x%04x\n",eeprom->product_id); - fprintf(stdout, "Release: 0x%04x\n",release); + fprintf(stdout, "Release: 0x%04x\n",eeprom->release_number); if (eeprom->self_powered) fprintf(stdout, "Self-Powered%s", (eeprom->remote_wakeup)?", USB Remote Wake Up\n":"\n"); else - fprintf(stdout, "Bus Powered: %3d mA%s", eeprom->max_power * 2, + fprintf(stdout, "Bus Powered: %3d mA%s", eeprom->max_power, (eeprom->remote_wakeup)?" USB Remote Wake Up\n":"\n"); if (eeprom->manufacturer) fprintf(stdout, "Manufacturer: %s\n",eeprom->manufacturer); @@ -2889,14 +3512,21 @@ int ftdi_eeprom_decode(struct ftdi_context *ftdi, int verbose) if (eeprom->serial) fprintf(stdout, "Serial: %s\n",eeprom->serial); fprintf(stdout, "Checksum : %04x\n", checksum); - if (ftdi->type == TYPE_R) + if (ftdi->type == TYPE_R) { fprintf(stdout, "Internal EEPROM\n"); + fprintf(stdout,"Oscillator: %s\n", eeprom->external_oscillator?"External":"Internal"); + } else if (eeprom->chip >= 0x46) fprintf(stdout, "Attached EEPROM: 93x%02x\n", eeprom->chip); if (eeprom->suspend_dbus7) fprintf(stdout, "Suspend on DBUS7\n"); if (eeprom->suspend_pull_downs) fprintf(stdout, "Pull IO pins low during suspend\n"); + if(eeprom->powersave) + { + if(ftdi->type >= TYPE_232H) + fprintf(stdout,"Enter low power state on ACBUS7\n"); + } if (eeprom->remote_wakeup) fprintf(stdout, "Enable Remote Wake Up\n"); fprintf(stdout, "PNP: %d\n",(eeprom->is_not_pnp)?0:1); @@ -2905,13 +3535,20 @@ int ftdi_eeprom_decode(struct ftdi_context *ftdi, int verbose) channel_mode[eeprom->channel_a_type], (eeprom->channel_a_driver)?" VCP":"", (eeprom->high_current_a)?" High Current IO":""); - if ((ftdi->type >= TYPE_2232C) && (ftdi->type != TYPE_R)) + if (ftdi->type == TYPE_232H) + { + fprintf(stdout,"FT1284 Mode Clock is idle %s, %s first, %sFlow Control\n", + (eeprom->clock_polarity)?"HIGH":"LOW", + (eeprom->data_order)?"LSB":"MSB", + (eeprom->flow_control)?"":"No "); + } + if ((ftdi->type == TYPE_2232H) || (ftdi->type == TYPE_4232H)) fprintf(stdout,"Channel B has Mode %s%s%s\n", channel_mode[eeprom->channel_b_type], (eeprom->channel_b_driver)?" VCP":"", (eeprom->high_current_b)?" High Current IO":""); if (((ftdi->type == TYPE_BM) || (ftdi->type == TYPE_2232C)) && - eeprom->use_usb_version == USE_USB_VERSION_BIT) + eeprom->use_usb_version) fprintf(stdout,"Use explicit USB Version %04x\n",eeprom->usb_version); if ((ftdi->type == TYPE_2232H) || (ftdi->type == TYPE_4232H)) @@ -2937,6 +3574,53 @@ int ftdi_eeprom_decode(struct ftdi_context *ftdi, int verbose) (eeprom->group3_schmitt)?" Schmitt Input":"", (eeprom->group3_slew)?" Slow Slew":""); } + else if (ftdi->type == TYPE_232H) + { + char *cbush_mux[] = {"TRISTATE","TXLED","RXLED", "TXRXLED","PWREN", + "SLEEP","DRIVE_0","DRIVE_1","IOMODE","TXDEN", + "CLK30","CLK15","CLK7_5" + }; + fprintf(stdout,"ACBUS has %d mA drive%s%s\n", + (eeprom->group0_drive+1) *4, + (eeprom->group0_schmitt)?" Schmitt Input":"", + (eeprom->group0_slew)?" Slow Slew":""); + fprintf(stdout,"ADBUS has %d mA drive%s%s\n", + (eeprom->group1_drive+1) *4, + (eeprom->group1_schmitt)?" Schmitt Input":"", + (eeprom->group1_slew)?" Slow Slew":""); + for (i=0; i<10; i++) + { + if (eeprom->cbus_function[i]<= CBUSH_CLK7_5 ) + fprintf(stdout,"C%d Function: %s\n", i, + cbush_mux[eeprom->cbus_function[i]]); + } + } + else if (ftdi->type == TYPE_230X) + { + char *cbusx_mux[] = {"TRISTATE","TXLED","RXLED", "TXRXLED","PWREN", + "SLEEP","DRIVE_0","DRIVE_1","IOMODE","TXDEN", + "CLK24","CLK12","CLK6","BAT_DETECT","BAT_DETECT#", + "I2C_TXE#", "I2C_RXF#", "VBUS_SENSE", "BB_WR#", + "BBRD#", "TIME_STAMP", "AWAKE#", + }; + fprintf(stdout,"DBUS has %d mA drive%s%s\n", + (eeprom->group0_drive+1) *4, + (eeprom->group0_schmitt)?" Schmitt Input":"", + (eeprom->group0_slew)?" Slow Slew":""); + fprintf(stdout,"CBUS has %d mA drive%s%s\n", + (eeprom->group1_drive+1) *4, + (eeprom->group1_schmitt)?" Schmitt Input":"", + (eeprom->group1_slew)?" Slow Slew":""); + for (i=0; i<4; i++) + { + if (eeprom->cbus_function[i]<= CBUSX_AWAKE) + fprintf(stdout,"CBUS%d Function: %s\n", i, cbusx_mux[eeprom->cbus_function[i]]); + } + + if (eeprom->invert) + print_inverted_bits(eeprom->invert); + } + if (ftdi->type == TYPE_R) { char *cbus_mux[] = {"TXDEN","PWREN","RXLED", "TXLED","TX+RXLED", @@ -2946,28 +3630,22 @@ int ftdi_eeprom_decode(struct ftdi_context *ftdi, int verbose) char *cbus_BB[] = {"RXF","TXE","RD", "WR"}; if (eeprom->invert) - { - char *r_bits[] = {"TXD","RXD","RTS", "CTS","DTR","DSR","DCD","RI"}; - fprintf(stdout,"Inverted bits:"); - for (i=0; i<8; i++) - if ((eeprom->invert & (1<invert); + for (i=0; i<5; i++) { - if (eeprom->cbus_function[i]cbus_function[i]<=CBUS_BB_RD) fprintf(stdout,"C%d Function: %s\n", i, cbus_mux[eeprom->cbus_function[i]]); else { - /* FIXME for Uwe: This results in an access above array bounds. - Also I couldn't find documentation about this mode. - fprintf(stdout,"C%d BB Function: %s\n", i, - cbus_BB[i]); - */ - fprintf(stdout, "Unknown CBUS mode. Might be special mode?\n"); - (void)cbus_BB; + if (i < 4) + /* Running MPROG show that C0..3 have fixed function Synchronous + Bit Bang mode */ + fprintf(stdout,"C%d BB Function: %s\n", i, + cbus_BB[i]); + else + fprintf(stdout, "Unknown CBUS mode. Might be special mode?\n"); } } } @@ -2995,6 +3673,9 @@ int ftdi_get_eeprom_value(struct ftdi_context *ftdi, enum ftdi_eeprom_value valu case PRODUCT_ID: *value = ftdi->eeprom->product_id; break; + case RELEASE_NUMBER: + *value = ftdi->eeprom->release_number; + break; case SELF_POWERED: *value = ftdi->eeprom->self_powered; break; @@ -3010,6 +3691,9 @@ int ftdi_get_eeprom_value(struct ftdi_context *ftdi, enum ftdi_eeprom_value valu case IN_IS_ISOCHRONOUS: *value = ftdi->eeprom->in_is_isochronous; break; + case OUT_IS_ISOCHRONOUS: + *value = ftdi->eeprom->out_is_isochronous; + break; case SUSPEND_PULL_DOWNS: *value = ftdi->eeprom->suspend_pull_downs; break; @@ -3019,6 +3703,9 @@ int ftdi_get_eeprom_value(struct ftdi_context *ftdi, enum ftdi_eeprom_value valu case USB_VERSION: *value = ftdi->eeprom->usb_version; break; + case USE_USB_VERSION: + *value = ftdi->eeprom->use_usb_version; + break; case MAX_POWER: *value = ftdi->eeprom->max_power; break; @@ -3034,6 +3721,24 @@ int ftdi_get_eeprom_value(struct ftdi_context *ftdi, enum ftdi_eeprom_value valu case CHANNEL_B_DRIVER: *value = ftdi->eeprom->channel_b_driver; break; + case CHANNEL_C_DRIVER: + *value = ftdi->eeprom->channel_c_driver; + break; + case CHANNEL_D_DRIVER: + *value = ftdi->eeprom->channel_d_driver; + break; + case CHANNEL_A_RS485: + *value = ftdi->eeprom->channel_a_rs485enable; + break; + case CHANNEL_B_RS485: + *value = ftdi->eeprom->channel_b_rs485enable; + break; + case CHANNEL_C_RS485: + *value = ftdi->eeprom->channel_c_rs485enable; + break; + case CHANNEL_D_RS485: + *value = ftdi->eeprom->channel_d_rs485enable; + break; case CBUS_FUNCTION_0: *value = ftdi->eeprom->cbus_function[0]; break; @@ -3049,6 +3754,21 @@ int ftdi_get_eeprom_value(struct ftdi_context *ftdi, enum ftdi_eeprom_value valu case CBUS_FUNCTION_4: *value = ftdi->eeprom->cbus_function[4]; break; + case CBUS_FUNCTION_5: + *value = ftdi->eeprom->cbus_function[5]; + break; + case CBUS_FUNCTION_6: + *value = ftdi->eeprom->cbus_function[6]; + break; + case CBUS_FUNCTION_7: + *value = ftdi->eeprom->cbus_function[7]; + break; + case CBUS_FUNCTION_8: + *value = ftdi->eeprom->cbus_function[8]; + break; + case CBUS_FUNCTION_9: + *value = ftdi->eeprom->cbus_function[9]; + break; case HIGH_CURRENT: *value = ftdi->eeprom->high_current; break; @@ -3097,12 +3817,27 @@ int ftdi_get_eeprom_value(struct ftdi_context *ftdi, enum ftdi_eeprom_value valu case GROUP3_SLEW: *value = ftdi->eeprom->group3_slew; break; + case POWER_SAVE: + *value = ftdi->eeprom->powersave; + break; + case CLOCK_POLARITY: + *value = ftdi->eeprom->clock_polarity; + break; + case DATA_ORDER: + *value = ftdi->eeprom->data_order; + break; + case FLOW_CONTROL: + *value = ftdi->eeprom->flow_control; + break; case CHIP_TYPE: *value = ftdi->eeprom->chip; break; case CHIP_SIZE: *value = ftdi->eeprom->size; break; + case EXTERNAL_OSCILLATOR: + *value = ftdi->eeprom->external_oscillator; + break; default: ftdi_error_return(-1, "Request for unknown EEPROM value"); } @@ -3114,7 +3849,7 @@ int ftdi_get_eeprom_value(struct ftdi_context *ftdi, enum ftdi_eeprom_value valu No parameter checking is performed \param ftdi pointer to ftdi_context - \param value_name Enum of the value to query + \param value_name Enum of the value to set \param value to set \retval 0: all fine @@ -3131,6 +3866,9 @@ int ftdi_set_eeprom_value(struct ftdi_context *ftdi, enum ftdi_eeprom_value valu case PRODUCT_ID: ftdi->eeprom->product_id = value; break; + case RELEASE_NUMBER: + ftdi->eeprom->release_number = value; + break; case SELF_POWERED: ftdi->eeprom->self_powered = value; break; @@ -3146,6 +3884,9 @@ int ftdi_set_eeprom_value(struct ftdi_context *ftdi, enum ftdi_eeprom_value valu case IN_IS_ISOCHRONOUS: ftdi->eeprom->in_is_isochronous = value; break; + case OUT_IS_ISOCHRONOUS: + ftdi->eeprom->out_is_isochronous = value; + break; case SUSPEND_PULL_DOWNS: ftdi->eeprom->suspend_pull_downs = value; break; @@ -3155,6 +3896,9 @@ int ftdi_set_eeprom_value(struct ftdi_context *ftdi, enum ftdi_eeprom_value valu case USB_VERSION: ftdi->eeprom->usb_version = value; break; + case USE_USB_VERSION: + ftdi->eeprom->use_usb_version = value; + break; case MAX_POWER: ftdi->eeprom->max_power = value; break; @@ -3170,6 +3914,24 @@ int ftdi_set_eeprom_value(struct ftdi_context *ftdi, enum ftdi_eeprom_value valu case CHANNEL_B_DRIVER: ftdi->eeprom->channel_b_driver = value; break; + case CHANNEL_C_DRIVER: + ftdi->eeprom->channel_c_driver = value; + break; + case CHANNEL_D_DRIVER: + ftdi->eeprom->channel_d_driver = value; + break; + case CHANNEL_A_RS485: + ftdi->eeprom->channel_a_rs485enable = value; + break; + case CHANNEL_B_RS485: + ftdi->eeprom->channel_b_rs485enable = value; + break; + case CHANNEL_C_RS485: + ftdi->eeprom->channel_c_rs485enable = value; + break; + case CHANNEL_D_RS485: + ftdi->eeprom->channel_d_rs485enable = value; + break; case CBUS_FUNCTION_0: ftdi->eeprom->cbus_function[0] = value; break; @@ -3185,6 +3947,21 @@ int ftdi_set_eeprom_value(struct ftdi_context *ftdi, enum ftdi_eeprom_value valu case CBUS_FUNCTION_4: ftdi->eeprom->cbus_function[4] = value; break; + case CBUS_FUNCTION_5: + ftdi->eeprom->cbus_function[5] = value; + break; + case CBUS_FUNCTION_6: + ftdi->eeprom->cbus_function[6] = value; + break; + case CBUS_FUNCTION_7: + ftdi->eeprom->cbus_function[7] = value; + break; + case CBUS_FUNCTION_8: + ftdi->eeprom->cbus_function[8] = value; + break; + case CBUS_FUNCTION_9: + ftdi->eeprom->cbus_function[9] = value; + break; case HIGH_CURRENT: ftdi->eeprom->high_current = value; break; @@ -3236,11 +4013,32 @@ int ftdi_set_eeprom_value(struct ftdi_context *ftdi, enum ftdi_eeprom_value valu case CHIP_TYPE: ftdi->eeprom->chip = value; break; + case POWER_SAVE: + ftdi->eeprom->powersave = value; + break; + case CLOCK_POLARITY: + ftdi->eeprom->clock_polarity = value; + break; + case DATA_ORDER: + ftdi->eeprom->data_order = value; + break; + case FLOW_CONTROL: + ftdi->eeprom->flow_control = value; + break; case CHIP_SIZE: ftdi_error_return(-2, "EEPROM Value can't be changed"); + break; + case EXTERNAL_OSCILLATOR: + ftdi->eeprom->external_oscillator = value; + break; + case USER_DATA_ADDR: + ftdi->eeprom->user_data_addr = value; + break; + default : ftdi_error_return(-1, "Request to unknown EEPROM value"); } + ftdi->eeprom->initialized_for_connected_device = 0; return 0; } @@ -3252,12 +4050,64 @@ int ftdi_set_eeprom_value(struct ftdi_context *ftdi, enum ftdi_eeprom_value valu \retval 0: All fine \retval -1: struct ftdi_contxt or ftdi_eeprom missing + \retval -2: Not enough room to store eeprom */ int ftdi_get_eeprom_buf(struct ftdi_context *ftdi, unsigned char * buf, int size) { if (!ftdi || !(ftdi->eeprom)) ftdi_error_return(-1, "No appropriate structure"); + + if (!buf || size < ftdi->eeprom->size) + ftdi_error_return(-1, "Not enough room to store eeprom"); + + // Only copy up to FTDI_MAX_EEPROM_SIZE bytes + if (size > FTDI_MAX_EEPROM_SIZE) + size = FTDI_MAX_EEPROM_SIZE; + memcpy(buf, ftdi->eeprom->buf, size); + + return 0; +} + +/** Set the EEPROM content from the user-supplied prefilled buffer + + \param ftdi pointer to ftdi_context + \param buf buffer to read EEPROM content + \param size Size of buffer + + \retval 0: All fine + \retval -1: struct ftdi_context or ftdi_eeprom or buf missing +*/ +int ftdi_set_eeprom_buf(struct ftdi_context *ftdi, const unsigned char * buf, int size) +{ + if (!ftdi || !(ftdi->eeprom) || !buf) + ftdi_error_return(-1, "No appropriate structure"); + + // Only copy up to FTDI_MAX_EEPROM_SIZE bytes + if (size > FTDI_MAX_EEPROM_SIZE) + size = FTDI_MAX_EEPROM_SIZE; + + memcpy(ftdi->eeprom->buf, buf, size); + + return 0; +} + +/** Set the EEPROM user data content from the user-supplied prefilled buffer + + \param ftdi pointer to ftdi_context + \param buf buffer to read EEPROM user data content + \param size Size of buffer + + \retval 0: All fine + \retval -1: struct ftdi_context or ftdi_eeprom or buf missing +*/ +int ftdi_set_eeprom_user_data(struct ftdi_context *ftdi, const char * buf, int size) +{ + if (!ftdi || !(ftdi->eeprom) || !buf) + ftdi_error_return(-1, "No appropriate structure"); + + ftdi->eeprom->user_data_size = size; + ftdi->eeprom->user_data = buf; return 0; } @@ -3412,12 +4262,15 @@ int ftdi_write_eeprom_location(struct ftdi_context *ftdi, int eeprom_addr, case TYPE_4232H: chip_type_location = 0x18; break; + case TYPE_232H: + chip_type_location = 0x1e; + break; default: ftdi_error_return(-4, "Device can't access unprotected area"); } if (ftdi_read_eeprom_location( ftdi, chip_type_location>>1, &chip_type)) - ftdi_error_return(-5, "Reading failed failed"); + ftdi_error_return(-5, "Reading failed"); fprintf(stderr," loc 0x%04x val 0x%04x\n", chip_type_location,chip_type); if ((chip_type & 0xff) != 0x66) { @@ -3440,6 +4293,7 @@ int ftdi_write_eeprom_location(struct ftdi_context *ftdi, int eeprom_addr, \retval 0: all fine \retval -1: read failed \retval -2: USB device unavailable + \retval -3: EEPROM not initialized for the connected device; */ int ftdi_write_eeprom(struct ftdi_context *ftdi) { @@ -3449,6 +4303,10 @@ int ftdi_write_eeprom(struct ftdi_context *ftdi) if (ftdi == NULL || ftdi->usb_dev == NULL) ftdi_error_return(-2, "USB device unavailable"); + + if(ftdi->eeprom->initialized_for_connected_device == 0) + ftdi_error_return(-3, "EEPROM not initialized for the connected device"); + eeprom = ftdi->eeprom->buf; /* These commands were traced while running MProg */ @@ -3461,6 +4319,11 @@ int ftdi_write_eeprom(struct ftdi_context *ftdi) for (i = 0; i < ftdi->eeprom->size/2; i++) { + /* Do not try to write to reserved area */ + if ((ftdi->type == TYPE_230X) && (i == 0x40)) + { + i = 0x50; + } usb_val = eeprom[i*2]; usb_val += eeprom[(i*2)+1] << 8; if (libusb_control_transfer(ftdi->usb_dev, FTDI_DEVICE_OUT_REQTYPE, @@ -3493,7 +4356,7 @@ int ftdi_erase_eeprom(struct ftdi_context *ftdi) if (ftdi == NULL || ftdi->usb_dev == NULL) ftdi_error_return(-2, "USB device unavailable"); - if (ftdi->type == TYPE_R) + if ((ftdi->type == TYPE_R) || (ftdi->type == TYPE_230X)) { ftdi->eeprom->chip = 0; return 0; @@ -3513,7 +4376,7 @@ int ftdi_erase_eeprom(struct ftdi_context *ftdi) NULL, 0, ftdi->usb_write_timeout) != 0) ftdi_error_return(-3, "Writing magic failed"); if (ftdi_read_eeprom_location( ftdi, 0x00, &eeprom_value)) - ftdi_error_return(-4, "Reading failed failed"); + ftdi_error_return(-4, "Reading failed"); if (eeprom_value == MAGIC) { ftdi->eeprom->chip = 0x46; @@ -3521,13 +4384,13 @@ int ftdi_erase_eeprom(struct ftdi_context *ftdi) else { if (ftdi_read_eeprom_location( ftdi, 0x40, &eeprom_value)) - ftdi_error_return(-4, "Reading failed failed"); + ftdi_error_return(-4, "Reading failed"); if (eeprom_value == MAGIC) ftdi->eeprom->chip = 0x56; else { if (ftdi_read_eeprom_location( ftdi, 0xc0, &eeprom_value)) - ftdi_error_return(-4, "Reading failed failed"); + ftdi_error_return(-4, "Reading failed"); if (eeprom_value == MAGIC) ftdi->eeprom->chip = 0x66; else