begin : Fri Apr 4 2003
copyright : (C) 2003-2017 by Intra2net AG and the libftdi developers
email : opensource@intra2net.com
+ SPDX-License-Identifier: LGPL-2.1-only
***************************************************************************/
/***************************************************************************
#include <stdlib.h>
#include "ftdi_i.h"
+/* Prevent deprecated messages when building library */
+#define _FTDI_DISABLE_DEPRECATED
#include "ftdi.h"
#include "ftdi_version_i.h"
if (libusb_detach_kernel_driver(ftdi->usb_dev, ftdi->interface) !=0)
detach_errno = errno;
}
+ else if (ftdi->module_detach_mode == AUTO_DETACH_REATACH_SIO_MODULE)
+ {
+ if (libusb_set_auto_detach_kernel_driver(ftdi->usb_dev, 1) != LIBUSB_SUCCESS)
+ detach_errno = errno;
+ }
if (libusb_get_configuration (ftdi->usb_dev, &cfg) < 0)
ftdi_error_return(-12, "libusb_get_configuration () failed");
/**
Clears the read buffer on the chip and the internal read buffer.
+ This is the correct behavior for an RX flush.
\param ftdi pointer to ftdi_context
\retval -1: read buffer purge failed
\retval -2: USB device unavailable
*/
+int ftdi_tciflush(struct ftdi_context *ftdi)
+{
+ if (ftdi == NULL || ftdi->usb_dev == NULL)
+ ftdi_error_return(-2, "USB device unavailable");
+
+ if (libusb_control_transfer(ftdi->usb_dev, FTDI_DEVICE_OUT_REQTYPE,
+ SIO_RESET_REQUEST, SIO_TCIFLUSH,
+ ftdi->index, NULL, 0, ftdi->usb_write_timeout) < 0)
+ ftdi_error_return(-1, "FTDI purge of RX buffer failed");
+
+ // Invalidate data in the readbuffer
+ ftdi->readbuffer_offset = 0;
+ ftdi->readbuffer_remaining = 0;
+
+ return 0;
+}
+
+
+/**
+ Clears the write buffer on the chip and the internal read buffer.
+ This is incorrect behavior for an RX flush.
+
+ \param ftdi pointer to ftdi_context
+
+ \retval 0: all fine
+ \retval -1: write buffer purge failed
+ \retval -2: USB device unavailable
+
+ \deprecated Use \ref ftdi_tciflush(struct ftdi_context *ftdi)
+*/
int ftdi_usb_purge_rx_buffer(struct ftdi_context *ftdi)
{
if (ftdi == NULL || ftdi->usb_dev == NULL)
/**
Clears the write buffer on the chip.
+ This is correct behavior for a TX flush.
\param ftdi pointer to ftdi_context
\retval -1: write buffer purge failed
\retval -2: USB device unavailable
*/
+int ftdi_tcoflush(struct ftdi_context *ftdi)
+{
+ if (ftdi == NULL || ftdi->usb_dev == NULL)
+ ftdi_error_return(-2, "USB device unavailable");
+
+ if (libusb_control_transfer(ftdi->usb_dev, FTDI_DEVICE_OUT_REQTYPE,
+ SIO_RESET_REQUEST, SIO_TCOFLUSH,
+ ftdi->index, NULL, 0, ftdi->usb_write_timeout) < 0)
+ ftdi_error_return(-1, "FTDI purge of TX buffer failed");
+
+ return 0;
+}
+
+
+/**
+ Clears the read buffer on the chip.
+ This is incorrect behavior for a TX flush.
+
+ \param ftdi pointer to ftdi_context
+
+ \retval 0: all fine
+ \retval -1: read buffer purge failed
+ \retval -2: USB device unavailable
+
+ \deprecated Use \ref ftdi_tcoflush(struct ftdi_context *ftdi)
+*/
int ftdi_usb_purge_tx_buffer(struct ftdi_context *ftdi)
{
if (ftdi == NULL || ftdi->usb_dev == NULL)
}
/**
+ Clears the RX and TX FIFOs on the chip and the internal read buffer.
+ This is correct behavior for both RX and TX flush.
+
+ \param ftdi pointer to ftdi_context
+
+ \retval 0: all fine
+ \retval -1: read buffer purge failed
+ \retval -2: write buffer purge failed
+ \retval -3: USB device unavailable
+*/
+int ftdi_tcioflush(struct ftdi_context *ftdi)
+{
+ int result;
+
+ if (ftdi == NULL || ftdi->usb_dev == NULL)
+ ftdi_error_return(-3, "USB device unavailable");
+
+ result = ftdi_tcoflush(ftdi);
+ if (result < 0)
+ return -1;
+
+ result = ftdi_tciflush(ftdi);
+ if (result < 0)
+ return -2;
+
+ return 0;
+}
+
+/**
Clears the buffers on the chip and the internal read buffer.
+ While coded incorrectly, the result is satisfactory.
\param ftdi pointer to ftdi_context
\retval -1: read buffer purge failed
\retval -2: write buffer purge failed
\retval -3: USB device unavailable
+
+ \deprecated Use \ref ftdi_tcioflush(struct ftdi_context *ftdi)
*/
int ftdi_usb_purge_buffers(struct ftdi_context *ftdi)
{
int ftdi_read_data(struct ftdi_context *ftdi, unsigned char *buf, int size)
{
int offset = 0, ret, i, num_of_chunks, chunk_remains;
- int packet_size = ftdi->max_packet_size;
+ int packet_size;
int actual_length = 1;
if (ftdi == NULL || ftdi->usb_dev == NULL)
ftdi_error_return(-666, "USB device unavailable");
// Packet size sanity check (avoid division by zero)
+ packet_size = ftdi->max_packet_size;
if (packet_size == 0)
ftdi_error_return(-1, "max_packet_size is bogus (zero)");
/**
Set flowcontrol for ftdi chip
+ Note: Do not use this function to enable XON/XOFF mode, use ftdi_setflowctrl_xonxoff() instead.
+
\param ftdi pointer to ftdi_context
\param flowctrl flow control to use. should be
- SIO_DISABLE_FLOW_CTRL, SIO_RTS_CTS_HS, SIO_DTR_DSR_HS or SIO_XON_XOFF_HS
+ SIO_DISABLE_FLOW_CTRL, SIO_RTS_CTS_HS, SIO_DTR_DSR_HS
\retval 0: all fine
\retval -1: set flow control failed
}
/**
+ Set XON/XOFF flowcontrol for ftdi chip
+
+ \param ftdi pointer to ftdi_context
+ \param xon character code used to resume transmission
+ \param xoff character code used to pause transmission
+
+ \retval 0: all fine
+ \retval -1: set flow control failed
+ \retval -2: USB device unavailable
+*/
+int ftdi_setflowctrl_xonxoff(struct ftdi_context *ftdi, unsigned char xon, unsigned char xoff)
+{
+ if (ftdi == NULL || ftdi->usb_dev == NULL)
+ ftdi_error_return(-2, "USB device unavailable");
+
+ uint16_t xonxoff = xon | (xoff << 8);
+ if (libusb_control_transfer(ftdi->usb_dev, FTDI_DEVICE_OUT_REQTYPE,
+ SIO_SET_FLOW_CTRL_REQUEST, xonxoff, (SIO_XON_XOFF_HS | ftdi->index),
+ NULL, 0, ftdi->usb_write_timeout) < 0)
+ ftdi_error_return(-1, "set flow control failed");
+
+ return 0;
+}
+
+/**
Set dtr line
\param ftdi pointer to ftdi_context
return 0;
}
-int ftdi_eeprom_set_strings(struct ftdi_context *ftdi, char * manufacturer,
- char * product, char * serial)
+int ftdi_eeprom_set_strings(struct ftdi_context *ftdi, const char * manufacturer,
+ const char * product, const char * serial)
{
struct ftdi_eeprom *eeprom;
git://developer.intra2net.com / libftdi / blobdiff