-vendor_id=0x0403 # Vendor ID
-product_id=0x6001 # Product ID
-
-max_power=0 # Max. power consumption: value * 2 mA. Use 0 if self_powered = true.
-
-###########
-# Strings #
-###########
-manufacturer="ACME Inc" # Manufacturer
-product="USB Serial Converter" # Product
-serial="08-15" # Serial
-
-###########
-# Options #
-###########
-self_powered=true # Turn this off for bus powered
-remote_wakeup=false # Turn this on for remote wakeup feature
-use_serial=true # Use the serial number string
-
-# Normally out don't have to change one of these flags
-in_is_isochronous=false # In Endpoint is Isochronous
-out_is_isochronous=false # Out Endpoint is Isochronous
-suspend_pull_downs=false # Enable suspend pull downs for lower power
-change_usb_version=false # Change USB Version
-usb_version=0x0200 # Only used when change_usb_version is enabled
+#see http://developer.intra2net.com/git/?p=libftdi;a=blob;f=src/ftdi.c
+#and http://developer.intra2net.com/git/?p=libftdi;a=blob;f=src/ftdi.h
+#and http://developer.intra2net.com/git/?p=libftdi;a=tree;f=ftdi_eeprom
+#and http://developer.intra2net.com/git/?p=libftdi;a=blob;f=ftdi_eeprom/example.conf
+#and http://developer.intra2net.com/git/?p=libftdi;a=blob;f=ftdi_eeprom/main.c
+
+############
+# Filename #
+############
+filename=eeprom.new # Filename of the EE file to be generated. Leave empty to skip file writing
+#flash_raw=false # Boolean:
+
+## Include another config file?
+#include
+
+############
+# IDs #
+############
+vendor_id="0x0403" # Integer: Vendor ID. FT245R factory default 0x0403
+product_id="0x6001" # Integer: Product ID. FT245R factory default 0x6001
+
+##############################
+# Device and Serial Strings #
+##############################
+manufacturer="ACME Inc" # String: Manufacturer. FT245R factory default FTDI
+product="USB Serial Converter" # String: Product. FT245R factory default FT245R USB FIFO
+serial="08-15" # String: Serial"number". FT245R factory default (sample chip) A9082P2B
+use_serial=true # Boolean: Use the serial number string
+
+############
+# Options #
+############
+max_power=500 # Integer: Max. power consumption: value * 2 mA(?). Use 0 if self_powered = true. FT245R factory default 90
+self_powered=false # Boolean: Turn this off for bus powered
+remote_wakeup=true # Boolean: Turn this on for remote wakeup feature
+
+# Normally you don't have to change one of these flags
+#in_is_isochronous=false # Boolean: In Endpoint is Isochronous
+#out_is_isochronous=false # Boolean: Out Endpoint is Isochronous
+#suspend_pull_downs=false # Boolean: Enable suspend pull downs for lower power
+#change_usb_version=false # Boolean: Change USB Version
+#usb_version=0x00 # Integer: Only used when change_usb_version is enabled
+
+#default_pid=0x6001 # Integer: Default Pid.
+
+#eeprom_type # Integer: Chip Type / EEPROM Type. Corresponds to ftdi_chip_type struct in ftdi.h
+#high_current=false # Boolean: High Current Drive
+
+##Type_R chips
+# Only used on FT-R chips (when omitted, use chip defaults)
+# Possible values correspond to enum ftdi_cbus_func in ftdi.h and strings are defined in function parse_cbus in ftdi_eeprom/main.c
+# Values in the struct are (see current ftid.h for an up to date list):
+# CBUS_TXDEN = 0, CBUS_PWREN = 1, CBUS_RXLED = 2, CBUS_TXLED = 3, CBUS_TXRXLED = 4, CBUS_SLEEP = 5, CBUS_CLK48 = 6, CBUS_CLK24 = 7, CBUS_CLK12 = 8, CBUS_CLK6 = 9, CBUS_IOMODE = 0xa, CBUS_BB_WR = 0xb, CBUS_BB_RD = 0xc
+# Strings to be used here are:
+# "TXDEN", "PWREN", "RXLED", "TXLED", "TXRXLED", "SLEEP", "CLK48", "CLK24", "CLK12", "CLK6", "IOMODE", "BB_WR", "BB_RD"
+cbus0=TXLED # String parsed to integer: FT245R factory default TXLED
+cbus1=RXLED # String parsed to integer: FT245R factory default RXLED
+cbus2=TXDEN # String parsed to integer: FT245R factory default TXDEN
+cbus3=PWREN # String parsed to integer: FT245R factory default PWREN
+cbus4=SLEEP # String parsed to integer: FT245R factory default SLEEP
+
+## Only used on FT232H chips (when omitted, use chip defaults)
+# Possible values correspond to enum ftdi_cbush_func in ftdi.h and strings are defined in function parse_cbush in ftdi_eeprom/main.c.
+# Values are (see current ftid.h for an up to date list):
+# CBUSH_TRISTATE = 0, CBUSH_TXLED = 1, CBUSH_RXLED = 2, CBUSH_TXRXLED = 3, CBUSH_PWREN = 4, CBUSH_SLEEP = 5, CBUSH_DRIVE_0 = 6, CBUSH_DRIVE1 = 7, CBUSH_IOMODE = 8, CBUSH_TXDEN = 9, CBUSH_CLK30 = 10, CBUSH_CLK15 = 11, CBUSH_CLK7_5 = 12
+# Strings to be used in this config file are:
+# "TRISTATE", "TXLED", "RXLED", "TXRXLED", "PWREN", "SLEEP", "DRIVE_0", "DRIVE1", "IOMODE", "TXDEN", "CLK30", "CLK15", "CLK7_5"
+##Type_232H Chips
+#cbush0=TRISTATE # String parsed to integer:
+#cbush1=TRISTATE # String parsed to integer:
+#cbush2=TRISTATE # String parsed to integer:
+#cbush3=TRISTATE # String parsed to integer:
+#cbush4=TRISTATE # String parsed to integer:
+#cbush5=TRISTATE # String parsed to integer:
+#cbush6=TRISTATE # String parsed to integer:
+#cbush7=TRISTATE # String parsed to integer:
+#cbush8=TRISTATE # String parsed to integer:
+#cbush9=TRISTATE # String parsed to integer:
+# Group Drive
+# Strings to be used in this config file are:
+# "4MA", "8MA", "12MA", "16MA"
+#group0_drive # Integer:
+
+# Only used on FT230X chips (when omitted, use chip defaults)
+# Possible values correspond to enum ftdi_cbusx_func in ftdi.h and strings are defined in function parse_cbusx in ftdi_eeprom/main.c.
+# Values are (see current ftid.h for an up to date list):
+# CBUSX_TRISTATE = 0, CBUSX_TXLED = 1, CBUSX_RXLED = 2, CBUSX_TXRXLED = 3, CBUSX_PWREN = 4, CBUSX_SLEEP = 5, CBUSX_DRIVE_0 = 6, CBUSX_DRIVE1 = 7, CBUSX_IOMODE = 8, CBUSX_TXDEN = 9, CBUSX_CLK24 = 10, CBUSX_CLK12 = 11, CBUSX_CLK6 = 12, CBUSX_BAT_DETECT = 13, CBUSX_BAT_DETECT_NEG = 14, CBUSX_I2C_TXE = 15, CBUSX_I2C_RXF = 16, CBUSX_VBUS_SENSE = 17, CBUSX_BB_WR = 18, CBUSX_BB_RD = 19, CBUSX_TIME_STAMP = 20, CBUSX_AWAKE = 21
+# Strings to be used in this config file are:
+# "TRISTATE", "TXLED", "RXLED", "TXRXLED", "PWREN", "SLEEP", "DRIVE_0", "DRIVE1", "IOMODE", "TXDEN", "CLK24", "CLK12", "CLK6", "BAT_DETECT", "BAT_DETECT_NEG", "I2C_TXE", "I2C_RXF", "VBUS_SENSE", "BB_WR", "BB_RD", "TIME_STAMP", "AWAKE"
+#cbusx0=TXDEN # String parsed to integer:
+#cbusx1=RXLED # String parsed to integer:
+#cbusx2=TXLED # String parsed to integer:
+#cbusx3=SLEEP # String parsed to integer:
########
# Misc #
########
-filename="eeprom.new" # Filename, leave empty to skip file writing
+## Pin Configuration
+#invert_txd # Boolean: Invert TXD signal
+#invert_rxd # Boolean: Invert RXD signal
+#invert_rts # Boolean: Invert RTS signal
+#invert_cts # Boolean: Invert CTS signal
+#invert_dtr # Boolean: Invert DTR signal
+#invert_dsr # Boolean: Invert DSR signal
+#invert_dcd # Boolean: Invert DCD signal
+#invert_ri # Boolean: Invert RI signal
+
+## Channel Types and Drivers
+# Possible values are (see current ftid.h (Interface Mode macros) and ftdi.c "channel_mode" for an up to date list). They are parsed in fucntion parse_chtype in ftdi_eeprom/main.c.
+# (from ftid.h): UART= 0x0, FIFO = 0x1, OPTO = 0x2, CPU = 0x4, FT1284 = 0x8, RS485 = 0x10
+# (from ftdi.c): UART = 0x0, FIOF = 0x1, CPU = 0x2, OPTO = 0x3, FT1284 = 0x3
+# Strings to be used in this config file are:
+# "UART", "FIFO", "OPTO", "CPU", "FT1284"
+cha_type=FIFO # String parsed to integer:
+#chb_type # String parsed to integer:
+
+cha_vcp=false # Boolean:
+#chb_vcp=false # Boolean:
+#chc_vcp=false # Boolean:
+#chd_vcp=false # Boolean:
+#cha_rs485 # Boolean:
+#chb_rs485 # Boolean:
+#chc_rs485 # Boolean:
+#chd_rs485 # Boolean:
+
+## Include user defined binary data into the the eeprom at address?
+#user_data_addr # Integer:
+#user_data_file # String: Filename of the data file to be used
+
+
git://developer.intra2net.com / libftdi / blobdiff