#see http://developer.intra2net.com/git/?p=libftdi;a=blob;f=src/ftdi.c #and http://developer.intra2net.com/git/?p=libftdi;a=blob;f=src/ftdi.h #and http://developer.intra2net.com/git/?p=libftdi;a=tree;f=ftdi_eeprom #and http://developer.intra2net.com/git/?p=libftdi;a=blob;f=ftdi_eeprom/example.conf #and http://developer.intra2net.com/git/?p=libftdi;a=blob;f=ftdi_eeprom/main.c ############ # Filename # ############ filename=eeprom.new # Filename of the EE file to be generated. Leave empty to skip file writing #flash_raw=false # Boolean: ## Include another config file? #include ############ # IDs # ############ vendor_id="0x0403" # Integer: Vendor ID. FT245R factory default 0x0403 product_id="0x6001" # Integer: Product ID. FT245R factory default 0x6001 ############################## # Device and Serial Strings # ############################## manufacturer="ACME Inc" # String: Manufacturer. FT245R factory default FTDI product="USB Serial Converter" # String: Product. FT245R factory default FT245R USB FIFO serial="08-15" # String: Serial"number". FT245R factory default (sample chip) A9082P2B use_serial=true # Boolean: Use the serial number string ############ # Options # ############ max_power=500 # Integer: Max. power consumption: value * 2 mA(?). Use 0 if self_powered = true. FT245R factory default 90 self_powered=false # Boolean: Turn this off for bus powered remote_wakeup=true # Boolean: Turn this on for remote wakeup feature # Normally you don't have to change one of these flags #in_is_isochronous=false # Boolean: In Endpoint is Isochronous #out_is_isochronous=false # Boolean: Out Endpoint is Isochronous #suspend_pull_downs=false # Boolean: Enable suspend pull downs for lower power #change_usb_version=false # Boolean: Change USB Version #usb_version=0x00 # Integer: Only used when change_usb_version is enabled #default_pid=0x6001 # Integer: Default Pid. #eeprom_type # Integer: Chip Type / EEPROM Type. Corresponds to ftdi_chip_type struct in ftdi.h #high_current=false # Boolean: High Current Drive ##Type_R chips # Only used on FT-R chips (when omitted, use chip defaults) # Possible values correspond to enum ftdi_cbus_func in ftdi.h and strings are defined in function parse_cbus in ftdi_eeprom/main.c # Values in the struct are (see current ftid.h for an up to date list): # CBUS_TXDEN = 0, CBUS_PWREN = 1, CBUS_RXLED = 2, CBUS_TXLED = 3, CBUS_TXRXLED = 4, CBUS_SLEEP = 5, CBUS_CLK48 = 6, CBUS_CLK24 = 7, CBUS_CLK12 = 8, CBUS_CLK6 = 9, CBUS_IOMODE = 0xa, CBUS_BB_WR = 0xb, CBUS_BB_RD = 0xc # Strings to be used here are: # "TXDEN", "PWREN", "RXLED", "TXLED", "TXRXLED", "SLEEP", "CLK48", "CLK24", "CLK12", "CLK6", "IOMODE", "BB_WR", "BB_RD" cbus0=TXLED # String parsed to integer: FT245R factory default TXLED cbus1=RXLED # String parsed to integer: FT245R factory default RXLED cbus2=TXDEN # String parsed to integer: FT245R factory default TXDEN cbus3=PWREN # String parsed to integer: FT245R factory default PWREN cbus4=SLEEP # String parsed to integer: FT245R factory default SLEEP ## Only used on FT232H chips (when omitted, use chip defaults) # Possible values correspond to enum ftdi_cbush_func in ftdi.h and strings are defined in function parse_cbush in ftdi_eeprom/main.c. # Values are (see current ftid.h for an up to date list): # CBUSH_TRISTATE = 0, CBUSH_TXLED = 1, CBUSH_RXLED = 2, CBUSH_TXRXLED = 3, CBUSH_PWREN = 4, CBUSH_SLEEP = 5, CBUSH_DRIVE_0 = 6, CBUSH_DRIVE1 = 7, CBUSH_IOMODE = 8, CBUSH_TXDEN = 9, CBUSH_CLK30 = 10, CBUSH_CLK15 = 11, CBUSH_CLK7_5 = 12 # Strings to be used in this config file are: # "TRISTATE", "TXLED", "RXLED", "TXRXLED", "PWREN", "SLEEP", "DRIVE_0", "DRIVE1", "IOMODE", "TXDEN", "CLK30", "CLK15", "CLK7_5" ##Type_232H Chips #cbush0=TRISTATE # String parsed to integer: #cbush1=TRISTATE # String parsed to integer: #cbush2=TRISTATE # String parsed to integer: #cbush3=TRISTATE # String parsed to integer: #cbush4=TRISTATE # String parsed to integer: #cbush5=TRISTATE # String parsed to integer: #cbush6=TRISTATE # String parsed to integer: #cbush7=TRISTATE # String parsed to integer: #cbush8=TRISTATE # String parsed to integer: #cbush9=TRISTATE # String parsed to integer: # Group Drive # Strings to be used in this config file are: # "4MA", "8MA", "12MA", "16MA" #group0_drive # Integer: # Only used on FT230X chips (when omitted, use chip defaults) # Possible values correspond to enum ftdi_cbusx_func in ftdi.h and strings are defined in function parse_cbusx in ftdi_eeprom/main.c. # Values are (see current ftid.h for an up to date list): # CBUSX_TRISTATE = 0, CBUSX_TXLED = 1, CBUSX_RXLED = 2, CBUSX_TXRXLED = 3, CBUSX_PWREN = 4, CBUSX_SLEEP = 5, CBUSX_DRIVE_0 = 6, CBUSX_DRIVE1 = 7, CBUSX_IOMODE = 8, CBUSX_TXDEN = 9, CBUSX_CLK24 = 10, CBUSX_CLK12 = 11, CBUSX_CLK6 = 12, CBUSX_BAT_DETECT = 13, CBUSX_BAT_DETECT_NEG = 14, CBUSX_I2C_TXE = 15, CBUSX_I2C_RXF = 16, CBUSX_VBUS_SENSE = 17, CBUSX_BB_WR = 18, CBUSX_BB_RD = 19, CBUSX_TIME_STAMP = 20, CBUSX_AWAKE = 21 # Strings to be used in this config file are: # "TRISTATE", "TXLED", "RXLED", "TXRXLED", "PWREN", "SLEEP", "DRIVE_0", "DRIVE1", "IOMODE", "TXDEN", "CLK24", "CLK12", "CLK6", "BAT_DETECT", "BAT_DETECT_NEG", "I2C_TXE", "I2C_RXF", "VBUS_SENSE", "BB_WR", "BB_RD", "TIME_STAMP", "AWAKE" #cbusx0=TXDEN # String parsed to integer: #cbusx1=RXLED # String parsed to integer: #cbusx2=TXLED # String parsed to integer: #cbusx3=SLEEP # String parsed to integer: ######## # Misc # ######## ## Pin Configuration #invert_txd # Boolean: Invert TXD signal #invert_rxd # Boolean: Invert RXD signal #invert_rts # Boolean: Invert RTS signal #invert_cts # Boolean: Invert CTS signal #invert_dtr # Boolean: Invert DTR signal #invert_dsr # Boolean: Invert DSR signal #invert_dcd # Boolean: Invert DCD signal #invert_ri # Boolean: Invert RI signal ## Channel Types and Drivers # Possible values are (see current ftid.h (Interface Mode macros) and ftdi.c "channel_mode" for an up to date list). They are parsed in fucntion parse_chtype in ftdi_eeprom/main.c. # (from ftid.h): UART= 0x0, FIFO = 0x1, OPTO = 0x2, CPU = 0x4, FT1284 = 0x8, RS485 = 0x10 # (from ftdi.c): UART = 0x0, FIOF = 0x1, CPU = 0x2, OPTO = 0x3, FT1284 = 0x3 # Strings to be used in this config file are: # "UART", "FIFO", "OPTO", "CPU", "FT1284" cha_type=FIFO # String parsed to integer: #chb_type # String parsed to integer: cha_vcp=false # Boolean: #chb_vcp=false # Boolean: #chc_vcp=false # Boolean: #chd_vcp=false # Boolean: #cha_rs485 # Boolean: #chb_rs485 # Boolean: #chc_rs485 # Boolean: #chd_rs485 # Boolean: ## Include user defined binary data into the the eeprom at address? #user_data_addr # Integer: #user_data_file # String: Filename of the data file to be used