[libftdi] / ftdi_eeprom / example.conf

#see http://developer.intra2net.com/git/?p=libftdi;a=blob;f=src/ftdi.c
#and http://developer.intra2net.com/git/?p=libftdi;a=blob;f=src/ftdi.h
#and http://developer.intra2net.com/git/?p=libftdi;a=tree;f=ftdi_eeprom
#and http://developer.intra2net.com/git/?p=libftdi;a=blob;f=ftdi_eeprom/example.conf
#and http://developer.intra2net.com/git/?p=libftdi;a=blob;f=ftdi_eeprom/main.c

############
# Filename #
############
filename=eeprom.new 									# Filename of the EE file to be generated. Leave empty to skip file writing
#flash_raw=false										# Boolean: 

## Include another config file?
#include

############
#   IDs    #
############
vendor_id="0x0403"      								# Integer: Vendor ID. FT245R factory default 0x0403
product_id="0x6001"     								# Integer: Product ID. FT245R factory default 0x6001

##############################
# Device and Serial Strings  #
##############################
manufacturer="ACME Inc"      							# String: Manufacturer. FT245R factory default FTDI
product="USB Serial Converter" 							# String: Product. FT245R factory default FT245R USB FIFO
serial="08-15"    							   			# String: Serial"number". FT245R factory default (sample chip) A9082P2B
use_serial=true 										# Boolean: Use the serial number string

############
# Options  #
############
max_power=500   										# Integer: Max. power consumption: value * 2 mA(?). Use 0 if self_powered = true. FT245R factory default 90
self_powered=false 										# Boolean: Turn this off for bus powered
remote_wakeup=true 										# Boolean: Turn this on for remote wakeup feature

# Normally you don't have to change one of these flags
#in_is_isochronous=false								# Boolean: In Endpoint is Isochronous
#out_is_isochronous=false								# Boolean: Out Endpoint is Isochronous
#suspend_pull_downs=false								# Boolean: Enable suspend pull downs for lower power
#change_usb_version=false								# Boolean: Change USB Version
#usb_version=0x00										# Integer: Only used when change_usb_version is enabled

#default_pid=0x6001										# Integer: Default Pid.

#eeprom_type											# Integer: Chip Type / EEPROM Type. Corresponds to ftdi_chip_type struct in ftdi.h
#high_current=false										# Boolean: High Current Drive

##Type_R chips
# Only used on FT-R chips (when omitted, use chip defaults)
# Possible values correspond to enum ftdi_cbus_func in ftdi.h and strings are defined in function parse_cbus in ftdi_eeprom/main.c
# Values in the struct are (see current ftid.h for an up to date list):
# CBUS_TXDEN = 0, CBUS_PWREN = 1, CBUS_RXLED = 2, CBUS_TXLED = 3, CBUS_TXRXLED = 4, CBUS_SLEEP = 5, CBUS_CLK48 = 6, CBUS_CLK24 = 7, CBUS_CLK12 = 8, CBUS_CLK6 =  9, CBUS_IOMODE = 0xa, CBUS_BB_WR = 0xb, CBUS_BB_RD = 0xc
# Strings to be used here are: 
# "TXDEN", "PWREN", "RXLED", "TXLED", "TXRXLED", "SLEEP", "CLK48", "CLK24", "CLK12", "CLK6", "IOMODE", "BB_WR", "BB_RD"
cbus0=TXLED  											# String parsed to integer: FT245R factory default TXLED
cbus1=RXLED  											# String parsed to integer: FT245R factory default RXLED
cbus2=TXDEN  											# String parsed to integer: FT245R factory default TXDEN
cbus3=PWREN  											# String parsed to integer: FT245R factory default PWREN
cbus4=SLEEP  											# String parsed to integer: FT245R factory default SLEEP

## Only used on FT232H chips (when omitted, use chip defaults)
# Possible values correspond to enum ftdi_cbush_func in ftdi.h and strings are defined in function parse_cbush in ftdi_eeprom/main.c.
# Values are (see current ftid.h for an up to date list):
# CBUSH_TRISTATE = 0, CBUSH_TXLED = 1, CBUSH_RXLED = 2, CBUSH_TXRXLED = 3, CBUSH_PWREN = 4, CBUSH_SLEEP = 5, CBUSH_DRIVE_0 = 6, CBUSH_DRIVE1 = 7, CBUSH_IOMODE = 8, CBUSH_TXDEN =  9,     CBUSH_CLK30 = 10, CBUSH_CLK15 = 11, CBUSH_CLK7_5 = 12
# Strings to be used in this config file are:
# "TRISTATE", "TXLED", "RXLED", "TXRXLED", "PWREN", "SLEEP", "DRIVE_0", "DRIVE1", "IOMODE", "TXDEN", "CLK30", "CLK15", "CLK7_5"
##Type_232H Chips			
#cbush0=TRISTATE										# String parsed to integer:
#cbush1=TRISTATE										# String parsed to integer: 
#cbush2=TRISTATE										# String parsed to integer: 
#cbush3=TRISTATE										# String parsed to integer:
#cbush4=TRISTATE										# String parsed to integer: 
#cbush5=TRISTATE										# String parsed to integer:
#cbush6=TRISTATE										# String parsed to integer:
#cbush7=TRISTATE										# String parsed to integer:
#cbush8=TRISTATE										# String parsed to integer: 
#cbush9=TRISTATE										# String parsed to integer:
# Group Drive
# Strings to be used in this config file are:
# "4MA", "8MA", "12MA", "16MA"
#group0_drive											# Integer: 

# Only used on FT230X chips (when omitted, use chip defaults)
# Possible values correspond to enum ftdi_cbusx_func in ftdi.h and strings are defined in function parse_cbusx in ftdi_eeprom/main.c.
# Values are (see current ftid.h for an up to date list):
# CBUSX_TRISTATE = 0, CBUSX_TXLED = 1, CBUSX_RXLED = 2, CBUSX_TXRXLED = 3, CBUSX_PWREN = 4, CBUSX_SLEEP = 5, CBUSX_DRIVE_0 = 6, CBUSX_DRIVE1 = 7, CBUSX_IOMODE = 8, CBUSX_TXDEN =  9,     CBUSX_CLK24 = 10, CBUSX_CLK12 = 11, CBUSX_CLK6 = 12, CBUSX_BAT_DETECT = 13, CBUSX_BAT_DETECT_NEG = 14, CBUSX_I2C_TXE = 15, CBUSX_I2C_RXF = 16, CBUSX_VBUS_SENSE = 17, CBUSX_BB_WR = 18, CBUSX_BB_RD = 19, CBUSX_TIME_STAMP = 20, CBUSX_AWAKE = 21
# Strings to be used in this config file are: 
# "TRISTATE", "TXLED", "RXLED", "TXRXLED", "PWREN", "SLEEP", "DRIVE_0", "DRIVE1", "IOMODE", "TXDEN", "CLK24", "CLK12", "CLK6", "BAT_DETECT", "BAT_DETECT_NEG", "I2C_TXE", "I2C_RXF", "VBUS_SENSE", "BB_WR", "BB_RD", "TIME_STAMP", "AWAKE"
#cbusx0=TXDEN											# String parsed to integer: 
#cbusx1=RXLED											# String parsed to integer:
#cbusx2=TXLED											# String parsed to integer:
#cbusx3=SLEEP											# String parsed to integer:

########
# Misc #
########

## Pin Configuration
#invert_txd												# Boolean: Invert TXD signal
#invert_rxd												# Boolean: Invert RXD signal
#invert_rts												# Boolean: Invert RTS signal
#invert_cts												# Boolean: Invert CTS signal
#invert_dtr												# Boolean: Invert DTR signal
#invert_dsr												# Boolean: Invert DSR signal
#invert_dcd												# Boolean: Invert DCD signal
#invert_ri												# Boolean: Invert RI signal

## Channel Types and Drivers
# Possible values are (see current ftid.h (Interface Mode macros) and ftdi.c "channel_mode" for an up to date list). They are parsed in fucntion parse_chtype in ftdi_eeprom/main.c.
# (from ftid.h): UART= 0x0, FIFO = 0x1, OPTO = 0x2, CPU = 0x4, FT1284 = 0x8, RS485 = 0x10
# (from ftdi.c): UART = 0x0, FIOF = 0x1, CPU = 0x2, OPTO = 0x3, FT1284 = 0x3
# Strings to be used in this config file are: 
# "UART", "FIFO", "OPTO", "CPU", "FT1284"
cha_type=FIFO											# String parsed to integer:
#chb_type												# String parsed to integer:

cha_vcp=false											# Boolean:
#chb_vcp=false											# Boolean:
#chc_vcp=false											# Boolean:
#chd_vcp=false											# Boolean:
#cha_rs485												# Boolean:
#chb_rs485												# Boolean:
#chc_rs485												# Boolean:
#chd_rs485												# Boolean:

## Include user defined binary data into the the eeprom at address?
#user_data_addr											# Integer:
#user_data_file											# String: Filename of the data file to be used
Commit	Line	Data
e0d59256 H	1	#see http://developer.intra2net.com/git/?p=libftdi;a=blob;f=src/ftdi.c
	2	#and http://developer.intra2net.com/git/?p=libftdi;a=blob;f=src/ftdi.h
	3	#and http://developer.intra2net.com/git/?p=libftdi;a=tree;f=ftdi_eeprom
	4	#and http://developer.intra2net.com/git/?p=libftdi;a=blob;f=ftdi_eeprom/example.conf
	5	#and http://developer.intra2net.com/git/?p=libftdi;a=blob;f=ftdi_eeprom/main.c
673ca433	6
e0d59256 H	7	############
	8	# Filename #
	9	############
	10	filename=eeprom.new # Filename of the EE file to be generated. Leave empty to skip file writing
	11	#flash_raw=false # Boolean:
	12
	13	## Include another config file?
	14	#include
	15
	16	############
	17	# IDs #
	18	############
	19	vendor_id="0x0403" # Integer: Vendor ID. FT245R factory default 0x0403
	20	product_id="0x6001" # Integer: Product ID. FT245R factory default 0x6001
	21
	22	##############################
	23	# Device and Serial Strings #
	24	##############################
	25	manufacturer="ACME Inc" # String: Manufacturer. FT245R factory default FTDI
	26	product="USB Serial Converter" # String: Product. FT245R factory default FT245R USB FIFO
	27	serial="08-15" # String: Serial"number". FT245R factory default (sample chip) A9082P2B
	28	use_serial=true # Boolean: Use the serial number string
	29
	30	############
	31	# Options #
	32	############
	33	max_power=500 # Integer: Max. power consumption: value * 2 mA(?). Use 0 if self_powered = true. FT245R factory default 90
	34	self_powered=false # Boolean: Turn this off for bus powered
	35	remote_wakeup=true # Boolean: Turn this on for remote wakeup feature
	36
	37	# Normally you don't have to change one of these flags
	38	#in_is_isochronous=false # Boolean: In Endpoint is Isochronous
	39	#out_is_isochronous=false # Boolean: Out Endpoint is Isochronous
	40	#suspend_pull_downs=false # Boolean: Enable suspend pull downs for lower power
	41	#change_usb_version=false # Boolean: Change USB Version
	42	#usb_version=0x00 # Integer: Only used when change_usb_version is enabled
	43
	44	#default_pid=0x6001 # Integer: Default Pid.
	45
	46	#eeprom_type # Integer: Chip Type / EEPROM Type. Corresponds to ftdi_chip_type struct in ftdi.h
	47	#high_current=false # Boolean: High Current Drive
	48
	49	##Type_R chips
add00ad6	50	# Only used on FT-R chips (when omitted, use chip defaults)
e0d59256 H	51	# Possible values correspond to enum ftdi_cbus_func in ftdi.h and strings are defined in function parse_cbus in ftdi_eeprom/main.c
	52	# Values in the struct are (see current ftid.h for an up to date list):
	53	# CBUS_TXDEN = 0, CBUS_PWREN = 1, CBUS_RXLED = 2, CBUS_TXLED = 3, CBUS_TXRXLED = 4, CBUS_SLEEP = 5, CBUS_CLK48 = 6, CBUS_CLK24 = 7, CBUS_CLK12 = 8, CBUS_CLK6 = 9, CBUS_IOMODE = 0xa, CBUS_BB_WR = 0xb, CBUS_BB_RD = 0xc
	54	# Strings to be used here are:
	55	# "TXDEN", "PWREN", "RXLED", "TXLED", "TXRXLED", "SLEEP", "CLK48", "CLK24", "CLK12", "CLK6", "IOMODE", "BB_WR", "BB_RD"
	56	cbus0=TXLED # String parsed to integer: FT245R factory default TXLED
	57	cbus1=RXLED # String parsed to integer: FT245R factory default RXLED
	58	cbus2=TXDEN # String parsed to integer: FT245R factory default TXDEN
	59	cbus3=PWREN # String parsed to integer: FT245R factory default PWREN
	60	cbus4=SLEEP # String parsed to integer: FT245R factory default SLEEP
	61
	62	## Only used on FT232H chips (when omitted, use chip defaults)
	63	# Possible values correspond to enum ftdi_cbush_func in ftdi.h and strings are defined in function parse_cbush in ftdi_eeprom/main.c.
	64	# Values are (see current ftid.h for an up to date list):
	65	# CBUSH_TRISTATE = 0, CBUSH_TXLED = 1, CBUSH_RXLED = 2, CBUSH_TXRXLED = 3, CBUSH_PWREN = 4, CBUSH_SLEEP = 5, CBUSH_DRIVE_0 = 6, CBUSH_DRIVE1 = 7, CBUSH_IOMODE = 8, CBUSH_TXDEN = 9, CBUSH_CLK30 = 10, CBUSH_CLK15 = 11, CBUSH_CLK7_5 = 12
	66	# Strings to be used in this config file are:
	67	# "TRISTATE", "TXLED", "RXLED", "TXRXLED", "PWREN", "SLEEP", "DRIVE_0", "DRIVE1", "IOMODE", "TXDEN", "CLK30", "CLK15", "CLK7_5"
	68	##Type_232H Chips
	69	#cbush0=TRISTATE # String parsed to integer:
	70	#cbush1=TRISTATE # String parsed to integer:
	71	#cbush2=TRISTATE # String parsed to integer:
	72	#cbush3=TRISTATE # String parsed to integer:
	73	#cbush4=TRISTATE # String parsed to integer:
	74	#cbush5=TRISTATE # String parsed to integer:
	75	#cbush6=TRISTATE # String parsed to integer:
	76	#cbush7=TRISTATE # String parsed to integer:
	77	#cbush8=TRISTATE # String parsed to integer:
	78	#cbush9=TRISTATE # String parsed to integer:
	79	# Group Drive
	80	# Strings to be used in this config file are:
	81	# "4MA", "8MA", "12MA", "16MA"
	82	#group0_drive # Integer:
add00ad6 RH	83
add00ad6 RH	84	# Only used on FT230X chips (when omitted, use chip defaults)
e0d59256 H	85	# Possible values correspond to enum ftdi_cbusx_func in ftdi.h and strings are defined in function parse_cbusx in ftdi_eeprom/main.c.
	86	# Values are (see current ftid.h for an up to date list):
	87	# CBUSX_TRISTATE = 0, CBUSX_TXLED = 1, CBUSX_RXLED = 2, CBUSX_TXRXLED = 3, CBUSX_PWREN = 4, CBUSX_SLEEP = 5, CBUSX_DRIVE_0 = 6, CBUSX_DRIVE1 = 7, CBUSX_IOMODE = 8, CBUSX_TXDEN = 9, CBUSX_CLK24 = 10, CBUSX_CLK12 = 11, CBUSX_CLK6 = 12, CBUSX_BAT_DETECT = 13, CBUSX_BAT_DETECT_NEG = 14, CBUSX_I2C_TXE = 15, CBUSX_I2C_RXF = 16, CBUSX_VBUS_SENSE = 17, CBUSX_BB_WR = 18, CBUSX_BB_RD = 19, CBUSX_TIME_STAMP = 20, CBUSX_AWAKE = 21
	88	# Strings to be used in this config file are:
	89	# "TRISTATE", "TXLED", "RXLED", "TXRXLED", "PWREN", "SLEEP", "DRIVE_0", "DRIVE1", "IOMODE", "TXDEN", "CLK24", "CLK12", "CLK6", "BAT_DETECT", "BAT_DETECT_NEG", "I2C_TXE", "I2C_RXF", "VBUS_SENSE", "BB_WR", "BB_RD", "TIME_STAMP", "AWAKE"
	90	#cbusx0=TXDEN # String parsed to integer:
	91	#cbusx1=RXLED # String parsed to integer:
	92	#cbusx2=TXLED # String parsed to integer:
	93	#cbusx3=SLEEP # String parsed to integer:
add00ad6	94
673ca433 TJ	95	########
	96	# Misc #
	97	########
	98
e0d59256 H	99	## Pin Configuration
	100	#invert_txd # Boolean: Invert TXD signal
	101	#invert_rxd # Boolean: Invert RXD signal
	102	#invert_rts # Boolean: Invert RTS signal
	103	#invert_cts # Boolean: Invert CTS signal
	104	#invert_dtr # Boolean: Invert DTR signal
	105	#invert_dsr # Boolean: Invert DSR signal
	106	#invert_dcd # Boolean: Invert DCD signal
	107	#invert_ri # Boolean: Invert RI signal
	108
	109	## Channel Types and Drivers
	110	# Possible values are (see current ftid.h (Interface Mode macros) and ftdi.c "channel_mode" for an up to date list). They are parsed in fucntion parse_chtype in ftdi_eeprom/main.c.
	111	# (from ftid.h): UART= 0x0, FIFO = 0x1, OPTO = 0x2, CPU = 0x4, FT1284 = 0x8, RS485 = 0x10
	112	# (from ftdi.c): UART = 0x0, FIOF = 0x1, CPU = 0x2, OPTO = 0x3, FT1284 = 0x3
	113	# Strings to be used in this config file are:
	114	# "UART", "FIFO", "OPTO", "CPU", "FT1284"
	115	cha_type=FIFO # String parsed to integer:
	116	#chb_type # String parsed to integer:
	117
	118	cha_vcp=false # Boolean:
	119	#chb_vcp=false # Boolean:
	120	#chc_vcp=false # Boolean:
	121	#chd_vcp=false # Boolean:
	122	#cha_rs485 # Boolean:
	123	#chb_rs485 # Boolean:
	124	#chc_rs485 # Boolean:
	125	#chd_rs485 # Boolean:
	126
	127	## Include user defined binary data into the the eeprom at address?
	128	#user_data_addr # Integer:
	129	#user_data_file # String: Filename of the data file to be used
	130
	131